神农架巴山冷杉种子雨及种实特性研究

巴山冷杉主要分布于秦巴山地，是湖北神农架地区暗针叶林的建群种，构成了当地的优势群落，对神农架地区的植被景观具有决定意义。研究巴山冷杉的结实特性，种子雨时空格局，种子萌发能力和活力劣变过程，有利于进一步认识和分析这一物种的生活史特征，群落组成结构和更新动态。对这一重要物种的合理保护和有效利用具有促进作用。 在湖北神农架自然保护区选择巴山冷杉－箭竹、巴山冷杉－茵芋和巴山冷杉－陕甘花楸群落设置样地，通过布设种子收集器结合室内实验分析，对巴山冷杉种子雨的时空格局进行研究。待巴山冷杉球果成熟时，人工采集球果和种子，测量和比较巴山冷杉的结实特征，利用发芽实验研究巴山冷杉的萌发特性，并通过人工加速老化实验探讨巴山冷杉种子的劣变过程。 巴山冷杉种子雨始于10月初，持续超过2个月，不同类型的巴山冷杉种群表现出不同的种子雨时空格局。巴山冷杉－箭竹群落中巴山冷杉种子雨平均强度167.93±111.14粒/m2，有活力种子比例占22.31%，落种高峰期集中于10月27日到11月2日间，种子雨在种群中呈现聚集分布。巴山冷杉－茵芋群落种子雨强度在三个样地中最小，只有16.41±14.41粒/m2，有活力种子仅占3.05%。巴山冷杉－陕甘花楸群落，种子雨落种高峰为10月15日至10月21日，林冠内种子雨数量占到了收集总数的87.95%。扩散的种子数量与离开中心母树的距离间的关系近似正态分布。 对巴山冷杉的结实特性的分析结果表明，巴山冷杉球果近圆柱形，球果平均长5.37±0.75cm;平均宽3.01±0.32cm;重量介于5.9g～41.3g。巴山冷杉种子长1.08～8.68mm，种子宽1.16～6.42mm，种子厚0.66～3.48mm，种子千粒重7.30g。球果单果出种量在不同种群的频数分布格局不同，巴山冷杉球果和种子的各项指标在种群间和种群内存在显著差异。球果大小、出种量及单粒种子的质量间存在着极显著的正相关关系。此外，种子生活力水平在母树间差异较大，不同母树的种子发芽率和发芽势不等且随时间的萌发进程也不相同，相同种源的巴山冷杉种子在不同的培养条件下萌发能力不同，室温条件下具有最高的发芽率但在25℃，8h光照，恒温培养时的萌发最为整齐。 高温高湿条件能够加速巴山冷杉种子的老化进程，使巴山冷杉种子的含水量发生变化，种子的活力水平随着老化时间的延长而降低，40℃，100% 相对湿度处理6天后种子基本丧失活力。

Aging in EPDM used for outdoor insulation

The effect of accelerated weather aging an ethylene-propylene-diene monomer(EPDM) rubber used for outdoor insulation was studied by surface roughness measurement and X-ray photoelectron spectroscopy(xps). The surface roughness of EPDM rubber changed with aging time. The surface oxygen and aluminum content were found to increase and that of carbon, silicon and nitrogen to decrease with time. The detailed XPS analysis indicated that the concentration of carbon in C-C decreased and that of highly oxidized carbons in C-O, C=O and O=C-O increased with time, which was due to the oxidation of EPDM rubber polymer. The appearance of O=C-O on the surface of EPDM rubber was a signal that EPDM rubber became aged. The aging speed decreased with time. The aging mechanism is discussed also.

Effects of heat-treatment processes on the electroless Ni-B coating and its natural aging mechanism

A Ni-B coating was prepared with EN using potassium borohydride reducing agent. The as-plated micro-structure of the coating was confirmed from XRD to be a mixture of amorphous and supersaturated solid solution. Three kinds of phase transformation were observed from the DSC curve. Different from the previous works, the formation of Ni4B3 and Ni2B was found during some transformation processes. The key factors which influence the variation of micro-hardness and micro-structure in deposits are the formation, the size and amount of Ni3B, Ni4B3 and Ni2B. Aging of the deposits treated under some heat treatment conditions occurred at room temperature. Changes of the micro-hardness indicated aging phenomena evidently. the natural aging phenomena are concerned with various kinds of decomposition of borides, especially with Ni4B3 phase. The extent of natural aging depends on the formation and the quantity of Ni(4)B3 and Ni2B.

The mechanical properties of an aluminum alloy by plasma-based ion implantation and solution-aging treatment

The age-strengthening 2024 aluminum alloy was modified by a combination of plasma-based ion implantation (PBII) and solution-aging treatments. The depth profiles of the implanted layer were investigated by X-ray photoelectron spectroscopy (XPS). The structure was studied by glancing angle X-ray diffraction (GXRD). The variation of microhardness with the indenting depth was measured by a nanoindenter. The wear test was carried on with a pin-on-disk wear tester. The results revealed that when the aluminum alloys were implanted with nitrogen at the solution temperature, then quenched in the vacuum chamber followed by an artificial aging treatment for an appropriate time, the amount of AIN precipitates by the combined treatment were more than that of the specimen implanted at ambient temperature. Optimum surface mechanical properties were obtained. The surface hardness was increased and the weight loss in a wear test decreased too.

Multi-scale Calculation of Settling Speed of Coarse Particles by Accelerated Stokesian Dynamics without Adjustable Parameter

The calculation of settling speed of coarse particles is firstly addressed, with accelerated Stokesian dynamics without adjustable parameters, in which far field force acting on the particle instead of particle velocity is chosen as dependent variables to consider inter-particle hydrodynamic interactions. The sedimentation of a simple cubic array of spherical particles is simulated and compared to the results available to verify and validate the numerical code and computational scheme. The improvedmethod keeps the same computational cost of the order O(N log N) as usual accelerated Stokesian dynamics does. Then, more realistic random suspension sedimentation is investigated with the help ofMont Carlo method. The computational results agree well with experimental fitting. Finally, the sedimentation of finer cohesive particle, which is often observed in estuary environment, is presented as a further application in coastal engineering.

Impact of laser-accelerated micron-size projectile on dense plasma

The impact of a laser-accelerated micron-size projectile on a dense plasma target is studied using two-dimensional particle-in-cell simulations. The projectile is first accelerated by an ultraintense laser. It then impinges on the dense plasma target and merges with the latter. Part of the kinetic energy of the laser-accelerated ions in the projectile is deposited in the fused target, and an extremely high concentration of plasma ions with a mean kinetic energy needed for fusion reaction is induced. The interaction is thus useful for laser-driven impact fusion and as a compact neutron source.