31 resultados para Sand and gravel mines and mining
em Chinese Academy of Sciences Institutional Repositories Grid Portal
Resumo:
In order to obtain the distribution rules of in situ stress and mining-induced stress of Beiminghe Iron Mine, the stress relief method by overcoring was used to measure the in situ stress, and the MC type bore-hole stress gauge was adopted to measure the mining-induced stress. In the in situ stress measuring, the technique of improved hollow inclusion cells was adopted, which can realize complete temperature compensation. Based on the measuring results, the distribution model of in situ stress was established and analyzed. The in situ stress measuring result shows that the maximum horizontal stress is 1.75-2.45 times of vertical stress and almost 1.83 times of the minimum horizontal stress in this mineral field. And the mining-induced stress measuring result shows that, according to the magnitude of front abutment pressure the stress region can be separated into stress-relaxed area, stress-concentrated area and initial stress area. At the -50 m mining level of this mine, the range of stress-relaxed area is 0-3 m before mining face; the range of stress-concentrated area is 3-55 m before mining face, and the maximum mining-induced stress is 16.5-17.5 MPa, which is 15-20 m from the mining face. The coefficient of stress concentration is 1.85.
Resumo:
A series of experiments were conducted to identify the factors that affected the growth and survival of the settling flounder larvae Paralichthys olivaceus. Settling larvae 24 days after hatching (DAH) were reared in 10-l experimental tanks up to 40 DAH, and two of the following factors were changed as controlled factors in each experiment: light regime (24L:0D or 12L:12D), prey density (1500, 3000, or 5000 Artemia l(-1)), shelter (sand or no sand) and stocking density (5, 10, or 15 fish l(-1)). Early settling larvae (24-35 DAH) experienced little mortality (less than 10% of the overall mortality) that was not significantly affected by above factors. In contrast, late settling larvae (36-40 DAH) suffered high cannibalistic mortality which was significantly influenced by each of the above factors. Larvae experienced significantly lower mortality at 10 fish l(-1) level than at other densities. Larvae at 15 fish l(-1) level had higher mortality than at 5 fish l(-1) when all other factors were identical. Larvae at 3000 and 5000 Artemia l(-1) treatments survived significantly better than at 1500 Artemia l(-1), but no significant differences in larval mortality were found between the two higher densities. Larvae suffered higher mortality at low prey density or at the absence of sand when they were exposed to longer photoperiod. Low stocking density significantly improved the growth of the settling larvae. The average daily instantaneous growth rate (G) at 5 and 15 fish l(-1) treatments were 0.050 and 0.034, with the coefficient of variation (CV) in final length at 16.4 and 23.5, respectively. Daily instantaneous growth rate increased significantly from 0.033 in the 1500 Artemia l(-1) to 0.041 and 0.045 in the 3000 and 5000 Artennia l(-1), respectively, but no significant difference in larval growth existed between the two higher prey densities. These findings suggested that the optimal prey density for growth and survival of the settling flounder larvae at a stocking density of 5 - 15 fish l(-1) was around 3000 Artemia l(-1) . Larvae that were exposed to 24L showed 20% increase in growth ( G = 0.046, CV = 18.7) than those exposed to 12L ( G = 0.037, CV = 20.5). Longer exposure to light significantly improved larval growth, provided sufficient food was available. Sand substrate did not show significant effects on larval growth, possibly because the larvae spent most of the time swimming or feeding in the water column during this stage. (C) 2003 Elsevier Science B.V. All rights reserved.
Resumo:
The Ludox-QPS method is a newly developed technique, which combines the Ludox HS 40 density centrifugation and quantitative protargol stain, to enumerate marine ciliates with good taxonomic resolution. We tested the method for simultaneous enumeration of diatoms, protozoa and meiobenthos and compared its extraction efficiency for meiobenthos with that of the routine Ludox-TM centrifugation and a modified protocol using Ludox HS 40. We conducted the evaluation with a sample size of 8.3 ml each from sandy, muddy-sand and muddy sediments collected from the intertidal area of the Yellow Sea in summer 2006 and spring 2007. The Ludox-QPS method not only produced high extraction efficiencies of 97 +/- 1.3% for diatoms and 97.6 +/- 0.8% for ciliates, indicating a reliable enumeration for eukaryotic microbenthos, but also produced excellent extraction efficiencies of on average 97.3% for total meiobenthos, 97.9% for nematodes and 97.8% for copepods from sands, muddy sands and mud. By contrast, the routine Ludox-TM centrifugation obtained only about 74% of total meiobenthos abundance with one extraction cycle, and the modified Ludox HS 40 centrifugation yielded on average 93% of total meiobenthos: 89.4 +/- 2.0% from sands, 93 +/- 4.1% from muddy sands and 97.1 +/- 3.0% from mud. Apart from the sediment type, sample volume was another important factor affecting the extraction efficiency for meiobenthos. The extraction rate was increased to about 96.4% when using the same modified Ludox centrifugation for a 4 ml sediment sample. Besides the excellent extraction efficiency, the Ludox-QPS method obtained higher abundances of meiobenthos, in particular nematodes, than the routine Ludox centrifugation, which frequently resulted in an uncertain loss of small meiobenthos during the sieving process. Statistical analyses demonstrated that there were no significant differences between the meiobenthos communities revealed by the Ludox-QPS method and the modified Ludox HS 40 centrifugation, showing the high efficiency of the Ludox-QPS method for simultaneous enumeration of diatom, protozoa and meiobenthos. Moreover, the comparatively high taxonomic resolution of the method, especially for diatoms and ciliates, makes it feasible to investigate microbial ecology at community level.
Resumo:
The gathering systems of crude oil are greatly endangered by the fine sand and soil in oil. Up to now , how to separate sand from the viscid oil is still a technical problem for oil production home or abroad. Recently , Institute of Mechanics in Chinese Academy of Sciences has developed a new type of oil-sand separator , which has been applied successfully in oil field in situ. In this paper, the numerical method of vortex-stream function is used to predict the liquid-solid separating course and the efficiency for this oil-sand separator. Results show that the viscosity and particle diameter have much influence on the particle motion. The calculating separating efficiency is compared with that of experiment and indicates that this method can be used to model the complex two-phase flow in the separator.
Resumo:
By comparing the dynamic responses of saturated soil to Biot's and Yamamoto's models, the properties of the two models have be pointed out. First of all, an analysis has been made for energy loss of each model from the basic equations. Then the damping of elastic waves in coarse sand and fine sand with loading frequency and soil's parameters have been calculated and the representation of viscous friction and Coulomb friction in the two models has been concluded. Finally, the variations of loading wave damping and stress phase angles with water depth and soil's parameters have been obtained as loading waves range in ocean waves.
Resumo:
对南海钙质砂进行了三轴实验研究, 重点针对不同胶结情况下的力学性质,如不同胶结材料和含量的变化对强度和应力应变特性的影响等.研究表明,钙质砂具有与陆源砂不同的性质,它的内摩擦角高达48°,远大于一般陆源砂的35°左右;在低围压下钙质砂表现出剪胀性,但随围压增加剪胀性降低;利用硅酸盐水泥作为胶结材料效果较好;随着水泥含量的增加,钙质砂试样的强度增加.
Resumo:
Studies on mixed mass cultivation of Anabaena spp. on a large scale (5170 m2) were conducted continuously for 3 years. Under the continental monsoon climate in northern subtropics (30-degrees-N, 115-degrees-E), 7-11 g dry weight m-2 day-1 of microalgal biomass on average was harvested in simple plastic greenhouses in the effective growth days during the warmer seasons. The maximum productivity was 22 g m-2 day-1 in the middle of summer. Observations on the productive properties of strains of Anabaena spp. indicated that they were different from and could compensate for each other in their productivities and adaptations to the seasonal changes. With different lining materials (PVC sheets, concrete, sand and soil) in the culture ponds, no significant variation of productivity was found, but bubbling with biogas in the middle of the day and the application of some growth regulating substances (2,4-D, NaHSO3 and extracts of oyster mushroom spawn) was able to improve the production. The cost of microalgal biomass in this way was around 0.75-1.0 US dollar(s) per kilogram.
Resumo:
黄土高原沟壑区王东沟流域从1986年至2006年的土地利用/覆被发生了较大变化,土地利用动态指数分别为:耕地3.21%,园地-36.11%,林地-4.05%,牧草地4.24%,居民点及独立工矿用地-0.62%,交通运输用地-12.27%,未利用地1.85%;变化趋势是:耕地逐年向园地流转,园地变化烈度较大,其他各类用地变化不太显著。引起这一变化的主要因素是自然、社会、经济、技术以及政策因素。结合这一变化,针对黄土高原沟壑区的实际情况,在黄土高原沟壑区土地利用经营与管理方面,应重视土地产出效益与粮食安全的关系,在保障区域粮食安全的基础上实现效益最大化。
Resumo:
为研究土壤粘粒含量对土壤入渗能力的影响,通过向自然土壤中添加沙粒、人工粘土的方法配制不同粘粒含量土壤,用土柱积水入渗模拟了人工配制土壤中粘粒含量对其入渗能力的影响。结果表明:(1)土壤粘粒含量对土壤入渗能力有较大影响,随粘粒含量增多,入渗能力递减:<0.001 mm粘粒含量从6%增加至40.4%时,稳定入渗速率从0.0169 cm/min降低至0.0068 cm/min,90 min累积入渗量则从3.66 cm降低至2.02 cm;(2)稳定入渗速率9、0 min累积入渗量与粘粒及物理性粘粒含量分别呈幂函数负相关、指数负相关关系,但与粘粒含量相关性更为显著;(3)通过对Green-Ampt模型、Philip模型及Kostiakov模型的参数拟合及累积入渗量计算,发现在本试验中Kostiakov模型拟合精度最高,Philip模型次之,Green-Ampt模型较差,说明Kostiakov模型对于均质土体是个比较实用的入渗模型。
Resumo:
采用盆栽试验,研究了两种高分子化合物聚丙烯酸钠(sodium polyacrylate,SP)与聚丙烯酰胺(Polyacrylamide,PAM)对甘蓝生长的影响。结果表明:在土壤中施入2/1000的两种高分子材料均能抑制土壤蒸发,砂土、粘土蒸发强度分别较对照降低35.5%、22.8%;甘蓝叶绿素受两种材料的影响不显著,受肥料影响较大;两种高分子材料施入土壤中增加了甘蓝产量、降低了根冠比,地上、地下生物量砂土较对照分别增加了61.1%、16.1%,粘土分别增加了55.2%、28.7%,根冠比砂土较对照平均降低了26.9%,粘土降低16%;PAM与SP使砂土容重较对照降低了13.9%,而粘土仅降低了4.1%;单施高分子处理水分利用效率平均较对照增加59.1%,与肥料混合使用时增加77.1%。总体来看,PAM与SP作用效果相近。
Resumo:
根据黄土高原( 陕西部分) 的145 个雨量观测站的30a 逐月降水资料,分析了陕西雨水资源的时空分布特征,并在次基础上,分别对西北地区的作物地土壤拦蓄潜力,陕北、渭北、关中3 地区居民工矿与交通用地的雨水汇流潜力进行了测算。初步结果为:两北地区作物地年总无效蒸发耗水达33 ×108 m3 ,若采取集流保墒措施,年可减少蒸发损失6-4 ×108 m3 ;3 地区居民工矿与交通用地年可汇流6-27 ×108 m 3 ,若一半用于粮食生产,并采取节水灌溉,初步推算黄土高原地区可增产粮食约28-8 ×108 kg。