Identification of Nonlinear Systems Through Time-Frequency Filtering Technique

In the previous paper, a class of nonlinear system is mapped to a so-called skeleton linear model (SLM) based on the joint time-frequency analysis method. Behavior of the nonlinear system may be indicated quantitatively by the variance of the coefficients of SLM versus its response. Using this model we propose an identification method for nonlinear systems based on nonstationary vibration data in this paper. The key technique in the identification procedure is a time-frequency filtering method by which solution of the SLM is extracted from the response data of the corresponding nonlinear system. Two time-frequency filtering methods are discussed here. One is based on the quadratic time-frequency distribution and its inverse transform, the other is based on the quadratic time-frequency distribution and the wavelet transform. Both numerical examples and an experimental application are given to illustrate the validity of the technique.

Time-Frequency Analysis of Nonlinear Systems: The Skeleton Linear Model and the Skeleton Curves

The joint time-frequency analysis method is adopted to study the nonlinear behavior varying with the instantaneous response for a class of S.D.O.F nonlinear system. A time-frequency masking operator, together with the conception of effective time-frequency region of the asymptotic signal are defined here. Based on these mathematical foundations, a so-called skeleton linear model (SLM) is constructed which has similar nonlinear characteristics with the nonlinear system. Two skeleton curves are deduced which can indicate the stiffness and damping in the nonlinear system. The relationship between the SLM and the nonlinear system, both parameters and solutions, is clarified. Based on this work a new identification technique of nonlinear systems using the nonstationary vibration data will be proposed through time-frequency filtering technique and wavelet transform in the following paper.

Fluctuation characteristics of arc voltage and jet flow in a non-transferred dc plasma generated at reduced pressure

A torch with a set of inter-electrode inserts between the cathode and the anode/nozzle with a wide nozzle exit was designed to generate plasma jets at chamber pressures of 500–10 000 Pa. The variation of the arc voltage was examined with the change in working parameters such as gas flow rate and chamber pressure. The fluctuation in the arc voltage was recorded with an oscilloscope, and the plasma jet fluctuation near the torch exit was observed with a high-speed video camera and detected with a double-electrostatic probe. Results show that the 300 Hz wave originated from the tri-phase rectified power supply was always detected under all generating conditions. Helmholtz oscillations over 3000 Hz was detected superposed on the 300 Hz wave at gas flow rates higher than 8.8 slm with a peak to valley amplitude lower than 5% of the average voltage value. No appreciable voltage fluctuation caused by the irregular arc root movement is detected, and mechanisms for the arc voltage and jet flow fluctuations are discussed.

减压直流等离子体射流电子温度的双静电探针测量

建立了一套双静电探针诊断系统,用于检测在气流量为4.2 slm、弧电流为80 A、真空事压力为165Pa的条件下纯氩直流非转移弧等离子体射流的电子温度及其分布.结果表明:发生器出口处射流中心的电子温度约为14 500 K,射流中电子温度随离开发生器出口的轴向或径向距离的增加而单调降低;径向电子温度梯度约为263 K/mm,轴向电子温度梯度为69 K/mm;射流中电子温度随弧电流增加而单调上升.

Coherent enhancement of broadband frequency up-conversion in BBO crystal by shaping femtosecond laser pulses

An optimal feedback control of broadband frequency up-conversion in BBO crystal is experimentally demonstrated by shaping femto-second laser pulses based on genetic algorithm, and the frequency up-conversion efficiency can be enhanced by similar to 16%. SPIDER results show that the optimal laser pulses have shorter pulse-width with the little negative chirp than the original pulse with the little positive chirp. By modulating the fundamental spectral phase with periodic square distribution on SLM-256, the frequency up-conversion can be effectively controlled by the factor of about 17%. The experimental results indicate that the broadband frequency up-conversion efficiency is related to both of second harmonic generation (SHG) and sum frequency generation (SFG), where the former depends on the fundamental pulse intensity, and the latter depends on not only the fundamental pulse intensity but also the fundamental pulse spectral phase. (c) 2006 Elsevier B.V. All rights reserved.

一种新型结构的单纵模光纤激光器

单纵模掺铒光纤激光器在光通信和光传感等方面有着广泛的应用前景。设计了一种新型的光纤激光器，在光纤环形镜中嵌入未抽运的掺铒光纤作为可饱和吸收体以抑制多纵模，用光纤环谐振腔作为滤波器抑制拍频噪声，用光纤光栅作为波长选择器件，最终得到了单纵模输出并消除了拍频噪声。使用零拍法测量其线宽小于频谱仪的低频极限5kHz。实验结果证明了可饱和吸收体和光纤环的功能。

Influences of phase shift on superresolution performances of annular filters

This paper investigates the influences of phase shift on superresolution performances of annular filters. Firstly, it investigates the influence of phase shift on axial superresolution. It proves theoretically that axial superresolution can not be obtained by two-zone phase filter with phase shift pi, and it gets the phase shift with which axial superresolution can be brought by two-zone phase filter. Secondly, it studies the influence of phase shift on transverse superresolution. It finds that the three-zone phase filter with arbitrary phase shift has an almost equal optimal transverse gain to that of commonly used three-zone phase filter, but can produce a much higher axial superresolution gain. Thirdly, it investigates the influence of phase shift on three-dimensional superresolution. Three-dimensional superresolution capability and design margin of three-zone complex filter with arbitrary phase shift are obtained, which presents the theoretical basis for three-dimensional superresolution design. Finally, it investigates the influence of phase shift on focal shift. To obtain desired focal shifts, it designs a series of three-zone phase filters with different phase shifts. A spatial light modulator (SLM) is used to implement the designed filters. By regulating the voltage imposed on the SLM, an accurate focal shift control is obtained.

A Q-swicthed all-solid-state single-longitudinal-mode laser with adjustable pulse-width and high repetition rate

A single-longitudinal-mode (SLM) laser-diode pumped Nd: YAG laser with adjustable pulse width is developed by using the techniques of pre-lasing and changing polarization of birefingent crystal. The Q-switching voltage is triggered by the peak of the pre-lasing pulse to achieve the higher stability of output pulse energy. The output energy of more than 1 mJ is obtained with output energy stability of 3% (rms) at 100 Hz. The pulse-width can be adjusted from 30 ns to 300 ns by changing the Q-switching voltage. The probability of putting out single-longitudinal-mode pulses is almost 100%. The laser can be run over four hours continually without mode hopping.

A compact diode-pumped injection seeded Nd : YAG laser with resonance-detection technique

A diode pumped injection seeded single-longitudinal-mode (SLM) Nd:YAG laser is achieved by using the resonance-detection technique in Q-switching operation. The pulsed oscillator laser uses a folded cavity to achieve compact construction. This system operates at 100 Hz and provides over 20 mJ/pulse of single-frequency 1064 nm output. The M-2 values of horizontal and vertical axes are 1.58 and 1.41, respectively. The probability of putting out single-longitudinal-mode pulses is 100%. The 355 nm laser output produced by frequency tripling has a linewidth less than 200 MHz. The laser can run over eight hours continually without mode hopping.

马铃薯in vitro 块茎发育的研究及其遗传转化受体系统的建立

研究了BAP在SLM→TIM、MA→TIM和切段诱导系统中与in vitro块茎发育的关系。在SLM→TIM系统中BAP没有促进块茎发育的作用;在MA→TIM系统中BAP具有促进块茎发育的作用;切段培养在20 ℃、8小时光照条件下则其块茎发育对BAP有依赖。系统地研究了光周期、蔗糖浓度和外源细胞分裂素在促进切段块茎发育方面的作用及其交互影响。确定了由切段诱导块茎的最佳培养条件以及用于BAP吸收代谢研究的实验条件。讨论了切段诱导系统在理论研究上的价值和生产上应用的前景。研究了无菌苗、长切段及切段BAP吸收运转代谢特点及其与块茎发育关系。马铃薯植物系统对BAP的吸收运转是需能代谢过程。BAP在植物系统运转性差与其在组织的代谢特点有关。在块茎诱导早期有标物质在小块茎或匍匐茎末端积累，这可能促使细胞分裂从而诱发块茎发育;但在成熟块茎中放射性物质浓度很低。外源细胞分裂素在切段或匍匐茎局部积累不是块茎发育的充分条件。在有利于块茎发育的条件下代谢早期BAP活性代谢产物含量明显地高于对照，代谢一定阶段后二种处理的切段BAP代谢谱趋于接近，这一代谢特点与BAP促进块茎发育的生理效应有关。运用同位素示踪技术研究了切段蔗糖吸收特点，外源细胞分裂素促进蔗糖在切段系统积累从而诱导体细胞储藏组织生化分化。短日照（黑暗）、较高浓度蔗糖、合适浓度BAP都有促进离体切段块茎发育作用，这几个因子在提高切段诱导水平方面具有协同效应。诱导早期切段中有块茎专一性糖蛋白Patatin痕量的存在。当切段发育了较大块茎后（诱导约15天）切段中Patatin含量明显增加。诱导3天切段系统中即有Patatin mRNA高水平地转录。诱导7天阶段Patatin mRNA含量迅速下降。块茎发育很可能是通过几种激素（包括块茎诱导因子）协同地对植物系统同化物尤其是蔗糖源库关系的调节而实现的。 建立了向马铃薯植物引入外源基因的受体系统。叶园盘与农杆菌（pGV2260:: pGV941）共培养。转化植株在选择培养基上培养大约3周即可从愈伤组织或直接从叶片边缘产生。在含有高浓度卡那霉素的培养基上转化植株大多表型正常，切段能够发育块茎，叶片能够形成愈伤组织。转化再生植株均含有NPT－II活性而未转化Desiree无菌苗没有NPT－II活性。Southern分析表明NPT－II基因已整合入转化植物基因组中。这一实验系统的建立为向马铃薯植物引进具有重要经济价值的外源基因创造了条件。

Using different carrier gases to control AlN film stress and the effect on morphology, structural properties and optical properties

On the metalorganic chemical vapour deposition growth of AlN, by adjusting H-2+N-2 mixture gas components, we can gradually control island dimension. During the Volmer - Weber growth, the 2-dimensional coalescence of the islands induces an intrinsic tensile stress. Then, this process can control the in-plane stress: with the N-2 content increasing from 0 to 3 slm, the in-plane stress gradually changes from 1.5 GPa tensile stress to - 1.2GPa compressive stress. Especially, with the 0.5 slm N-2 + 2.5 slm H-2 mixture gas, the in-plane stress is only 0.1 GPa, which is close to the complete relaxation state. Under this condition, this sample has good crystal and optical qualities.

A novel ultra-narrow transmission-band fiber Bragg grating and its application in a single-longitudinal-mode fiber laser with improved efficiency

A novel design approach to ultra-narrow transmission-band fiber Bragg grating (FBG) is proposed and demonstrated for the first time. The new grating consists of multiple identical distributed-Bragg reflector (DBR) cavities and a it-phase-shifted gap, and hence, the proposed laser is constructed by the cascade of these identical DBR fiber lasers. By manufacturing the proposed grating in a piece of Er-Yb codoped fiber, a single-wavelength single-longitudinal-mode (SLM) fiber laser with improved efficiency is demonstrated experimentally. The experimental results show that the pump-to-signal conversion efficiency of the proposed laser is improved by a factor of two in comparison with the optimized distributed-feedback (DFB) fiber lasers. (c) 2007 Elsevier B.V. All rights reserved.

Effect of Carrier Gas Flux on ZnO Nanorod Arrays Grown by MOCVD

ZnO nanorod arrays with different morphologies were grown by metalorganic chemical vapor deposition （MOCVD）. The diameters of nanorods range from 150 nm to 20 nm through changing the carrier gas flux during the growth process. Measurements such as scanning electron microscope （SEM）, X-ray diffraction （XRD）, Raman scattering and photoluminescence （pL） spectrum were employed to analyze the differences of these nanorods. It was found that when both carrier gas flux of Zn and O reactant are 1 SLM, we can obtain the best vertically aligned and uniform nanorods. Furthermore, the PL spectrum reveals a blueshift of UV emission peak, which may be assigned to the increase of surface effect.

稳定可调谐的单纵模多环形腔掺铒光纤激光器

提出了一种多环形腔(MRC)结构的稳定可调的单纵模(SLM)掺铒光纤激光器,多环形腔结构由双环形有源腔和两个次级无源腔组成。这种激光器是利用光纤法布里-珀罗可调滤波器(FFP-TF)以及光学光栅滤波器(OGF)两种滤波器和多环形腔结构相结合来共同选模。可实现波长调节范围为1528～1565 nm,在整个波长调节范围内边模抑制比大于44.53 dB,在1554 nm附近边模抑制比可以达到最大值51.18 dB, 输出功率为-8.84 dBm,通过应用多环型腔结构,激光器的输出很稳定,在18 min的观察时间内,中心波长的变化小于0.02 nm,输出功率的变化小于0.04 dBm,实现了稳定且可调谐的单纵模输出。

单纵模多环形腔掺铒光纤激光器及其稳定性

介绍了一种多环形腔结构(MRC)的单纵模(SLM)掺铒光纤激光器(EDFL)。这种激光器通过在主环形腔中插入充当模式滤波器的三个长度不等的无源次级环形腔, 并结合腔内光纤布拉格光栅(FBG)形成多环形腔掺铒光纤激光器结构, 多环形谐振腔可保证激光器的单纵模输出。讨论了使激光器运行在单纵模状态的谐振腔理论。同时, 为了提高系统输出的频率稳定性, 采用外光注入方法有效地抑制了模式跳变和拍噪声, 改善了输出谱特性。实验得到在1550.225 nm处输出功率约3.6 dBm, 信噪比(SNR)>35 dB的单纵模输出光, 且测得线宽小于500 Hz。