Algorithm for simulating fracture processes in concrete by lattice modeling

To simulate fracture behaviors in concrete more realistically, a theoretical analysis on the potential question in the quasi-static method is presented, then a novel algorithm is proposed which takes into account the inertia effect due to unstable crack propagation and meanwhile requests much lower computational efforts than purely dynamic method. The inertia effect due to load increasing becomes less important and can be ignored with the loading rate decreasing, but the inertia effect due to unstable crack propagation remains considerable no matter how low the loading rate is. Therefore, results may become questionable if a fracture process including unstable cracking is simulated by the quasi-static procedure excluding completely inertia effects. However, it requires much higher computational effort to simulate experiments with not very high loading rates by the dynamic method. In this investigation which can be taken as a natural continuation, the potential question of quasi-static method is analyzed based on the dynamic equations of motion. One solution to this question is the new algorithm mentioned above. Numerical examples are provided by the generalized beam (GB) lattice model to show both fracture processes under different loading rates and capability of the new algorithm.

基于向量变换的包裹相位场预处理与信息完整性探讨

针对包裹相位场在消除噪声的特别要求,提出了对包裹相位场预处理的向量滤波方法。理论分析了功率谱密度和向量变换的滤波思想。仿真实验研究了滤波模板的大小对滤波效果的影响,比较了在同样模板的选取下向量滤波方法与二次均值滤波法的滤波效果,分析了向量滤波方法与二次均值滤波法的功率谱密度分布。结果表明,相比二次均值滤波法,向量滤波法在降噪的同时,相位图依然清晰,它的功率谱密度分布没有明显变化,预处理后频谱信息的丢失远小于二次均值滤波。向量滤波法在提高信噪比的同时,信息的完整性得到较好保证。

一种应用敏感的Web服务请求调度策略

在当前企业级Web服务应用中，性能问题一直是人们关注的重点．然而作为支撑Web服务应用的主流平台，Web应用服务器对请求的调度仍然是传统的先来先服务策略（FCFS）．这种策略无法区分请求的重要性，降低了关键请求的性能．以往的研究较少从应用的性能需求出发考虑服务器的请求调度机制，影响了服务器性能保障的效果．对此，提出了应用敏感的Web服务请求调度策略（AWSRS），使用应用获益来评估服务器为应用提供的性能保障效果．服务器将请求按照应用的需求进行分类，并按照应用获益最大化的目标为不同类型的请求分配资源．实验表明AWSRS策略能够有效提高关键请求的性能．

岷江源头区植被景观与流域土壤侵蚀的动态相关性

作为复杂的生态过程之一，土壤侵蚀常常被空间景观异质性影响。深入地研究土壤侵蚀与植被景观的相关性对以减少水土流失为目的的河流中上游生态恢复工作来说十分重要。本文利用遥感和GIS 技术，对岷江源头区的植被景观和土壤侵蚀动态（1974年～2002 年）进行分析，并从景观生态学的角度，系统地研究了整体植被景观和不同的植被景观类型的景观特征与土壤侵蚀量、侵蚀模数以及土壤侵蚀强度的相关性，得出的结论主要有以下几个方面：1. 从植被景观特征与土壤侵蚀量和土壤侵蚀模数的相关性的角度出发，森林能最大限度地控制土壤侵蚀，草地对土壤侵蚀的控制能力不及森林，而且能在一定程度上增加土壤侵蚀。灌丛与土壤侵蚀量和土壤侵蚀模数的关系则比较复杂，还需要进一步地研究。农用地与森林、灌丛、草地等植被类型不同，它的增加将会明显地增加产沙量。随着各景观类型（灌丛除外）分布的镶嵌性的增强，土壤侵蚀量和侵蚀模数会减少。2. 从植被景观特征与土壤侵蚀强度的相关性的角度出发，在景观水平上，植被景观的景观多样性指数、景观破碎度指数、景观形状指数和景观聚集度指数均与土壤侵蚀强度有明显的相关性。在较轻侵蚀强度的区域中的植被景观具有更丰富的多样性和更低的破碎程度，景观的组分和结构都更加复杂，景观斑块的形状也比较复杂。同时，植被景观的空间异质性也较强。3. 从不同景观类型对土壤侵蚀强度的控制能力大小看：针叶林> 落叶阔叶林>针阔混交林> 灌丛> 草地> 农用地。同时，对于除农用地以外的其他植被景观类型来说，增加其平均斑块面积和形状的复杂性会在一定程度上减少土壤侵蚀强度。而对于农用地来说，斑块形状的简单化以及分布形式的均匀镶嵌化则是减少土壤侵蚀强度的有效手段。 As a complex ecological process, soil erosion is affected by the spatial landscape heterogeneity.The relation between soil erosion and landscape characteristic weights a lot in ecosystemrestoration that aim to control the soil erosion in watershed. By means of RS and GIStechniques, this study analyzed dynamic variations in landscape characteristic and soil erosionin the Minjiang headwater region over a period of 28 years to elucidate the interrelationshipsbetween landscape characteristics and soil erosion. The results are as follows:1. In terms of relation between landscape characteristics and soil erosion module, forest canmitigate the soil erosion much better than grass. The relation between shrub and soil erosionmodule is rather complicated that requests further more study to confirm how those two factorscorrelated with each other. Cultivated land differs from other landscape classes in creatingconditions most favorable for soil erosion. Moreover, the dispersion of all landscape classes,except for shrub, correlates with soil module negatively.II2. In terms of relation between landscape characteristics and soil erosion strength, the diversityindex, fragment index, shape index and contagion index of the vegetation in Minjiangheadwater region at landscape-level correlated with soil erosion clearly. Vegetation landscapein No and Slight erosion region is more diverse, fragmental and constructed in more complexway. The shape of those vegetation patches is also more complicated. The spatial heterogeneityof the vegetation landscape is much more evident than that located in moderate and strong erosion region too.3. At class-level, different landscape classes affected soil erosion strength in different ways.Taking the mitigating effect on erosion strength into consideration, landscape classes can bearranged in this turn: coniferous forest > Deciduous forest > Mixed forest > Shrub > Grassland > Cultivated land. At the same time, for most landscape classes, except for cultivated land,increase the mean patch size and complicate the shape of patch will help to relieve the erosionstrength. However, for cultivated land, simplifying the shape of patch and scattering thepatches have the same effect.

Optimization design of magnetic field on cold yoke superconducting solenoid

The optimized design of magnetic field for a cold yoke superconducting solenoid is introduced in this paper. Using some kinds of optimization designs and OPERA, we optimize the main solenoid, cold yoke and compensated winding. Through this design, the requests of the superconducting solenoid are realized.

机器人研磨抛光工艺研究与实现

机器人研磨抛光工艺研究建立在大量机器人磨抛试验的基础上。本文针对加工对象——有机玻璃,在满足被加工工件质量的前提下,确定了机器人研磨抛光加工时磨片的合理使用顺序、规划加工路径和安排正交试验,以获得机器人磨抛加工的最优工艺参数组合,并制定机器人磨抛的加工策略。最后通过机器人研磨抛光加工实例,进一步验证了机器人的研磨抛光工艺知识有其合理性。

自适应LQR方法在载人潜水器动力定位中的应用研究

根据我国正在研制开发的某深海载人潜水器的特性及其对载人潜水器动力定位控制的要求,采用最优控制方法LQR与递推辨识系统参数相结合的方法———自适应LQR方法进行控制。仿真结果表明这种方法具有良好的控制效果。

多移动机器人合作系统中的单机控制体系结构研究

随着机器人技术的不断发展，出现了合作多移动机器人系统这一新的研究和应用领域，随之而来的是对机器人控制体系的新的要求．本文分析了合作多移动机器人系统对单机控制体系结构的要求，并以此为背景，在比较两种典型的智能机器人体系结构的基础上，提出一种混合分层的体系结构

基于结构分析地震资料去噪方法研究

With the development of oil and gas exploration, the exploration of the continental oil and gas turns into the exploration of the subtle oil and gas reservoirs from the structural oil and gas reservoirs in China. The reserves of the found subtle oil and gas reservoirs account for more than 60 percent of the in the discovered oil and gas reserves. Exploration of the subtle oil and gas reservoirs is becoming more and more important and can be taken as the main orientation for the increase of the oil and gas reserves. The characteristics of the continental sedimentary facies determine the complexities of the lithological exploration. Most of the continental rift basins in East China have entered exploration stages of medium and high maturity. Although the quality of the seismic data is relatively good, this areas have the characteristics of the thin sand thickness, small faults, small range of the stratum. It requests that the seismic data have high resolution. It is a important task how to improve the signal/noise ratio of the high frequency of seismic data. In West China, there are the complex landforms, the deep embedding the targets of the prospecting, the complex geological constructs, many ruptures, small range of the traps, the low rock properties, many high pressure stratums and difficulties of boring well. Those represent low signal/noise ratio and complex kinds of noise in the seismic records. This needs to develop the method and technique of the noise attenuation in the data acquisition and processing. So that, oil and gas explorations need the high resolution technique of the geophysics in order to solve the implementation of the oil resources strategy for keep oil production and reserves stable in Ease China and developing the crude production and reserves in West China. High signal/noise ratio of seismic data is the basis. It is impossible to realize for the high resolution and high fidelity without the high signal/noise ratio. We play emphasis on many researches based on the structure analysis for improving signal/noise ratio of the complex areas. Several methods are put forward for noise attenuation to truly reflect the geological features. Those can reflect the geological structures, keep the edges of geological construction and improve the identifications of the oil and gas traps. The ideas of emphasize the foundation, give prominence to innovate, and pay attention to application runs through the paper. The dip-scanning method as the center of the scanned point inevitably blurs the edges of geological features, such as fault and fractures. We develop the new dip scanning method in the shap of end with two sides scanning to solve this problem. We bring forward the methods of signal estimation with the coherence, seismic wave characteristc with coherence, the most homogeneous dip-sanning for the noise attenuation using the new dip-scanning method. They can keep the geological characters, suppress the random noise and improve the s/n ratio and resolution. The rutine dip-scanning is in the time-space domain. Anew method of dip-scanning in the frequency-wavenumber domain for the noise attenuation is put forward. It use the quality of distinguishing between different dip events of the reflection in f-k domain. It can reduce the noise and gain the dip information. We describe a methodology for studying and developing filtering methods based on differential equations. It transforms the filtering equations in the frequency domain or the f-k domain into time or time-space domains, and uses a finite-difference algorithm to solve these equations. This method does not require that seismic data be stationary, so their parameters can vary at every temporal and spatial point. That enhances the adaptability of the filter. It is computationally efficient. We put forward a method of matching pursuits for the noise suppression. This method decomposes any signal into a linear expansion of waveforms that are selected from a redundant dictionary of functions. These waveforms are chosen in order to best match the signal structures. It can extract the effective signal from the noisy signal and reduce the noise. We introduce the beamforming filtering method for the noise elimination. Real seismic data processing shows that it is effective in attenuating multiples and internal multiples. The s/n ratio and resolution are improved. The effective signals have the high fidelity. Through calculating in the theoretic model and applying it to the real seismic data processing, it is proved that the methods in this paper can effectively suppress the random noise, eliminate the cohence noise, and improve the resolution of the seismic data. Their practicability is very better. And the effect is very obvious.