中国主要森林生态系统碳储量和碳收支评估

森林作为陆地生态系统中主要的植被类型在全球碳循环研究中有着十分重要的作用，而森林资源清样调查资料以其系统性、科学性、连续性等优点在森林生态系统碳循环研究中具有十分重要的地位。本研究以中国主要森林植被类型为研究对象，基于中国森林资源清样调查资料（FID），采用建立的生物气候生产力模型和反映林龄和蓄积量共同影响的生产力回归模型分别估计了中国油松林和主要造林树种的生产力;利用改进的材积源生物量法估算了中国主要森林植被类型的碳储量;并基于多元线性回归方法和因子分析法探讨了林业用地以及气候因子对中国森林植被碳储量的影响;同时，结合生物地球化学循环模型CENTURY模型评估了中国森林生态系统的碳收支。主要研究结果如下： 1建立了中国油松林生物气候生产力模型NPPa=［0.331n（V／A）+0.18］*3000（1-e-0.00096‘哪，根据油松林的森林资源清样调查资料和气候资料估算的中国油松林生产力平均为7.82Mg•ha-1•yr-1，其变化幅度为3.32-11.87Mg•ha-1•yr-1，其分布表现为南高北低的趋势。生产力较高的区域主要分布在东部和南部（四川、湖北、河南、辽宁等省），均大于7.7Mg•ha-1•yr-1;生产力较低的区域主要分布在北部和西部较为干旱的区域（内蒙古），NPP均低于5.5Mg•ha-1•yr-1：油松林集中分布区（陕西、山西）生产力处于中等水平，在5.5-7.7Mg•ha-1•yr-1之间。 2基于森林资源清样调查资料评估了中国五种主要造林树种（落叶松Larix，油松Pinusstabulaeformis，马尾松Pinusmassoniana，杉木Cunninghamialanceolata，杨树Populus）的生产力，分别为8.43、5.75、4.42、4.41、7.33Mg•ha-1•yr-1，低于世界平均生产力水平，主要原因可能是这五种造林树种大都处于未成熟阶段，表明中国造林树种在提高中国森林生态系统的固碳能力方面有很大的潜力。 3基于两次（第三次和第四次）森林资源清查资料和改进的材积源生物量法评估了中国森林的碳储量，分别为3.48和3.78PgC（1Pg＝1015g）。 基于多元线性回归模型探讨了林业用地变化对森林植被碳储量的影响。分析表明：在森林平均林龄减小的情况下，森林植被碳储量有增加的趋势;而森林碳储量随森林面积的增加而增加。当平均林龄增加10年，全国森林面积增加1*104ha时，全国森林植被的碳储量将增加54.51Tg（1Tg＝1012g），表明我国森林植被碳储量取决于自然和人为因素共同作用。 采用因子分析方法探讨了气候变化对森林植被碳储量的影响，分析表明：气温是森林植被碳储量的主要限制因子。当气温升高时，森林植被碳储量有降低的趋势;降水与森林植被碳储量呈正相关，随降水的增加森林植被碳储量增加。在年均温升高4℃，年降水量增加10％;年均温升高4℃，年降水量不变;年均温升高4℃，年降水量减少10％三种气候变化情景下，我国森林植被碳储量的增加量分别为：9.19Tg、6.67Tg和4.15Tg。 4基于生物地球化学循环模型模拟的中国森林生态系统的碳收支为0.17PgC，中国森林表现为一个巨大的碳汇。其中，西南地区森林碳收支占44％，华东及西北地区的森林碳收支总和不足14%。

A novel image restoration algorithm based on high-dimensional space geometry

A novel image restoration approach based on high-dimensional space geometry is proposed, which is quite different from the existing traditional image restoration techniques. It is based on the homeomorphisms and "Principle of Homology Continuity" (PHC), an image is mapped to a point in high-dimensional space. Begin with the original blurred image, we get two further blurred images, then the restored image can be obtained through the regressive curve derived from the three points which are mapped form the images. Experiments have proved the availability of this "blurred-blurred-restored" algorithm, and the comparison with the classical Wiener Filter approach is presented in final.

A novel image restoration approach based on point location in high-dimensional space geometry

The goal of image restoration is to restore the original clear image from the existing blurred image without distortion as possible. A novel approach based on point location in high-dimensional space geometry method is proposed, which is quite different from the thought ways of existing traditional image restoration approaches. It is based on the high-dimensional space geometry method, which derives from the fact of the Principle of Homology-Continuity (PHC). Begin with the original blurred image, we get two further blurred images. Through the regressive deducing curve fitted by these three images, the first iterative deblured image could be obtained. This iterative "blurring-debluring-blurring" process is performed till reach the deblured image. Experiments have proved the availability of the proposed approach and achieved not only common image restoration but also blind image restoration which represents the majority of real problems.

A novel image restoration algorithm based on high-dimensional space geometry

A novel image restoration approach based on high-dimensional space geometry is proposed, which is quite different from the existing traditional image restoration techniques. It is based on the homeomorphisms and "Principle of Homology Continuity" (PHC), an image is mapped to a point in high-dimensional space. Begin with the original blurred image, we get two further blurred images, then the restored image can be obtained through the regressive curve derived from the three points which are mapped form the images. Experiments have proved the availability of this "blurred-blurred-restored" algorithm, and the comparison with the classical Wiener Filter approach is presented in final.

侵蚀环境撂荒地植被恢复与土壤质量的协同效应

探索黄土丘陵区退耕撂荒地植被恢复与土壤相关要素的关系,为生态恢复重建决策提供理论依据。【方法】以中国科学院安塞水土保持实验站墩山退耕不同年限的撂荒地为研究对象,通过植被群落特征调查和土壤质量测试分析等,运用相关和回归分析方法对植被恢复过程中植被与土壤质量的协同效应研究。【结果】在其恢复过程中,植被地上生物量与植被覆盖度呈正相关,它们与土壤容重呈负相关,而与土壤大团聚体、水稳性大团聚体、有机质含量、全氮含量、水解氮含量、速效钾含量、微生物量(C、N、P)以及土壤呼吸强度之间呈正相关,与土壤全磷、速效磷含量无显著相关性。同时,植被地上生物量和植被覆盖度与土壤抗蚀性关系密切,它们与表示土壤抗蚀性能的土壤团聚度、结构系数之间呈正相关,与土壤分散系数、结构体破坏率之间呈负相关。土壤容重与土壤大团聚体、水稳性团聚体含量之间呈负相关,土壤大团聚体含量与水稳性团聚体含量之间亦呈正相关。黄土丘陵区退耕撂荒地植被恢复过程中,土壤质量得到不断恢复提高,并能促进植被的生长繁衍,推动植被恢复演替进展,植被恢复健康和演替的同时,亦进一步推动土壤质量的改善提高,二者之间表现为正向互作效应。

中国黄土地区耕作侵蚀模拟(英文)

耕作侵蚀是国际上新近开展的一个研究领域。为了对中国黄土地区的耕作侵蚀规律进行定量描述 ,采用施放小立方块作为示踪材料进行耕作试验及测量来示踪和监测土壤运动 ,并通过相关分析与理论推导 ,对该地区的耕作侵蚀进行了模拟 ,获得了能够直接计算出坡面剖面任何一点净侵蚀模数的耕作侵蚀模型 ,结果表明 ,在采用当地由动物牵引的传统犁在坡面上自下而上进行往返横坡等高向下翻土耕作方式下 :1)一次耕作导致的耕层土壤朝坡向方向平均水平运动距离随坡度的变化表现为线性相关 ;2 )一次耕作导致的坡面剖面任何位置耕层断面的净侵蚀模数 ,受土壤容重、耕作深度、土壤与耕作条件决定的系数和地形曲率的影响。

Study on growth factors of intermetallic layer within hot-dipped 25% Al-Zn alloy coating on steel

25%Al-Zn alloy coating performs better than hot dip galvanized coating and 55%Al-Zn-Si coating with regard to general seawater corrosion protection. This study deals with the interfacial intermetallic layer's growth, which affects considerably the corrosion resistance and mechanical properties of 25%Al-Zn alloy coatings, by means of three-factor quadratic regressive orthogonal experiments, The regression equation shows that the intermetallic layer thickness decreases rapidly with increasing content of Si added to the Zn-Al alloy bath, increases with rise in bath temperature and prolonging dip time. The most effective factor that determined the thickness of intermetallic layer was the amount of Si added to Zn-Al alloy bath, while the effect of bath temperature and dip time on the thickness of intermetallic layer were not very obvious.

准噶尔盆地西北缘三叠系层序地层及有利勘探目标选择

Based on outcrop, borehole, seismic and regional geological data, the sequence stratigraphy, sedimentary facies of the Triassic in the western margin of the Zhugaer basin was studied, and favorable exploration target was forecasted. The major achievements include: (1) the Triassic in the western margin of the Zhugaer basin can be divided into 1 second-order sequence and 5 third-order sequences, which are, in ascending order, TSQ1, TSQ2, TSQ3, TSQ4, and TSQ5. TSQ1 is equivolent to Baikouquan formation, TSQ2 is equivolent to lower Kelamayi formation, TSQ3 is equivolent to upper Kelamai formation, TSQ4 is equivolent to lower and middle Baijiantan formation, and TSQ5 is equivolent to upper Baijiantan formation. Each sequence is divided into transgressive and regressive system tracts. Thus the sequence correlation framework is established. (2) The factors controlling development of sequences are analyzed, and it is believed that tectonic is the major controlling factor. Model of sequence development is summarized. (3)Through study on sedimentary facies, 6 types of facies are recognized: alluvial fan, fan delta, braided river, braided delta, delta and lake. Their microfacies are also recognized. In this study, it is proposed that the upper and lower Kelamayi formation（TSQ2、 TSQ3）is deposited by braided river instead of alluvial fan. This conclusion is of important theoretical and practical significance.(4) The sedimentary facies map of each sequence is compiled, and the sedimentary facies developed in each sequence is determined. In TSQ1, the sedimentary facies developed is alluvial fan and fan delta. In TSQ2, the sedimentary facies developed is mainly alluvial fan and fan delta in the north, and braided river and braided delta in the south. In TSQ3, the sedimentary facies developed is mainly braided river and braided delta. In TSQ4, the sedimentary facies developed is mainly braided delta in the north, and meandering delta in the south. In TSQ5, the sedimentary facies developed is mainly braided river and braided delta. (5) In the framework of sequence stratigrahpy, favorable areas for concealed traps are forecasted, and different types of traps are developed in different system tracts. (6) Favorable areas for future exploration are predicted.

松辽盆地南部大情字井地区CO2埋存体地质格架及储层建模

Increasing attentions have been paid to the subsurface geological storage for CO2 in view of the huge storage capacity of subsurface reservoirs. The basic requirement for subsurface CO2 storage is that the CO2 should be sequestrated as supercritical fluids (physical trapping), which may also interact with ambient reservoir rocks and formation waters, forming new minerals (chemical trapping). In order to the effective, durable and safe storage for CO2, enough storage space and stable sealing caprock with strong sealing capacity are necessitated, in an appropriate geological framework. Up till now, hydrocarbon reservoirs are to the most valid and appropriate CO2 storage container, which is well proven as the favorable compartment with huge storage capacity and sealing condition. The thesis focuses on two principal issues related to the storage and sealing capacity of storage compartment for the Qingshankou and Yaojia formations in the Daqingzijing block, Southern Songliao Basin, which was selected as the pilot well site for CO2-EOR storage. In the operation area, three facies, including deltaic plain, deltaic front and subdeep-deep lake facies associations, are recognized, in which 11 subfacies such as subaqueous distributary channel, river- mouth bar, interdistributary bay, sheet sandbody, crevasse splay and overflooding plain are further identified. These subfacies are the basic genetic units in the reservoir and sealing rocks. These facies further comprise the retrogradational and progradational depositional cycles, which were formed base- level rise and fall, respectively. During the regressive or lake lowstand stage, various sands including some turbidites and fans occurred mostly at the bottom of the hinged slope. During the progradation stage, these sands became smaller in size and episodically stepped backwards upon the slope, with greatly expanded and deeped lake. However, most of Cretaceous strata in the study area, localized in the basin centre under this stage, are mainly composed of grey or grizzly siltstones and grey or dark grey mudstones intercalated with minor fine sandstones and purple mudstones. On the base of borehole and core data, these siltstones are widespread, thin from 10 to 50 m thick, good grain sorting, and have relative mature sedimentary structures with graded bedding and cross- lamination or crossbeds such as ripples, which reflect strong hydrodynamic causes. Due to late diagenesis, pores are not widespread in the reservoirs, especially the first member of Qingshankou formation. There are two types of pores: primary pore and secondary cores. The primary pores include intergranular pores and micropores, and the secondary pores include emposieus and fracture pores. Throat channels related to pores is also small and the radius of throat in the first, second and third member of Qingshankou formation is only 0.757 μm, 0.802 μm and 0.631 μm respectively. In addition, based on analyzing the probability plot according to frequency of occurrence of porosity and permeability, they appear single- peaked distribution, which reflects strong hetero- geneity. All these facts indicate that the conditions of physical property of reservoirs are not better. One reason may be provided to interpret this question is that physical property of reservoirs in the study area is strong controlled by the depositional microfacies. From the statistics, the average porosity and permeability of microfacies such as subaqueous distributary channel, channel mouth bar, turbidites, is more than 9 percent and 1md respectively. On the contrary, the average porosity and permeability of microfacies including sand sheet, flagstone and crevasse splay are less than 9 percent and 0.2md respectively. Basically, different hydrodynamic environment under different microfacies can decide different physical property. According to the reservoir models of the first member of Qingshankou formation in the No. well Hei47 block, the character of sedimentary according to the facies models is accord to regional disposition evolution. Meantime, the parameter models of physical property of reservoir indicate that low porosity and low permeability reservoirs widespread widely in the study area, but the sand reservoirs located in the channels are better than other places and they are the main sand reservoirs. The distribution and sealing ability of fault- fractures and caprock are the key aspects to evaluate the stable conditions of compartments to store CO2 in the study area. Based on the core observation, the fractures widespread in the study area, especially around the wells, and most of them are located in the first and second member of Qingshankou formation, almost very few in the third member of Qingshankou formation and Yaojia formation instead. In addition, analyzing the sealing ability of eleven faults in the three-dimensional area in the study area demonstrates that most of faults have strong sealing ability, especially in the No. well Hei56 and Qing90-27. To some extent, the sealing ability of faults in the No. well Hei49, Qing4-6 and Qing84-29 are worse than others. Besides, the deposition environment of most of formations in the study area belongs to moderately deep and deep lake facies, which undoubtedly take advantage to caprocks composed of mudstones widespread and large scale under this deposition environment. In the study area, these mudstones distribute widely in the third member of Qingshankou formation, Yaojia and Nenjiang formation. The effective thickness of mudstone is nearly ~550m on an average with few or simple faults and fractures. In addition, there are many reservoir beds with widely- developed insulated interbeds consist of mudstones or silty mudstone, which can be the valid barrier to CO2 upper movement or leakage through diffusion, dispersion and convection. Above all, the closed thick mud caprock with underdeveloped fractures and reservoir beds can be taken regard as the favorable caprocks to provide stable conditions to avoid CO2 leakage.

鄂尔多斯盆地西缘中生代构造与地层分析及盆地演化研究

Through the detailed analyses of Mesozoic tectono-stratigraphy and basin formation dynamic mechanism and the styles of different units in the western margin of Ordos Basin(Abbreviated to "the western margin"), while some issues of the pre-Mesozoic in the western margin and central part of Ordos Basin also be discussed, the main views and conclusion as follows: 1. There are three types of depositional systems which are related with syndepositional tectonic actions and different tectonic prototype basins, including: alluvial fan systems, river system (braided river system and sinuosity river system), lacustrine-river delta system and fan delta system. They have complex constitutions of genetic facies. For the tectonic sequence VI, the fan sediments finning upper in the north-western margin and coarse upper in the south-western margin respectively. 2. In order to light the relationship between basin basement subsidence rate and sediment supply and the superposed styles, five categories of depositional systems tracts in different prototype basins were defined: aggrading and transgressive systems tracts during early subsidence stage, regressive and aggrading systems tracts during rapid subsidence, upper transgessive systems tracts during later subsidence stage. Different filling characteristics and related tectonic actions in different stages in Mesozoic period were discussed. 3. In order to determined the tectonic events of the provenance zones and provenance strata corresponding to basins sediments, according the clastics dispersal style and chemical analyses results of sediments in different areas, the provenance characteristics have been described. The collision stage between the "Mongolia block" and the north-China block may be the late permian; The sediments of Mesozoic strata in the north-western margin is mainly from the Alex blocks and north-Qilian Paleozoic orogeny, while the south-western margin from Qinling orogeny. The volcanic debris in the Yan'an Formation may be from the arc of the north margin of north-China block, although more study needed for the origin of the debris. The provenance of the Cretaceous may be from the early orogeny and the metamorphic basement of Longshan group. 4. The subsidence curve and subsidence rate and sedimentary rate in different units have been analyzed. For different prototype basin, the form of the subsidence curves are different. The subsidence of the basins are related with the orogeny of the basins.The beginning age of the foreland basin may be the middle Triassic. The change of basement subsidence show the migration of the foredeep and forebulge into the basin. The present appearance of the Ordos basin may be formed at the late stage of Cretaceous, not formed at the late Jurassic. 5. The structure mode of the west margin is very complex. Structure transfer in different fold-thrust units has been divided into three types: transfer faults, transition structures and intersected form. The theoretic explanations also have been given for the origin and the forming mechanism. The unique structure form of Hengshanpu is vergent west different from the east vergence of most thrust faults, the mechanism of which has been explained. 6. In Triassic period, the He1anshan basin is extensional basin while the Hengshanbu is "forland", and the possible mechanism of the seemingly incompatible structures has been explained. First time, the thesis integrate the Jurassic—early Cretaceous basins of west margin with the Hexi corridor basins and explain the unitive forming mechanism. The model thinks the lateral extrusion is the main mechanism of the Hexi corridor and west margin basins, meanwhile, the deep elements and basement characters of the basins. Also, for the first time, we determine the age of the basalt in Helanshan area as the Cretaceous period, the age matching with the forming of the Cretaceous basins and as the main factor of the coal metamorphism in the Helanshan area. 7. The Neoprotterozoic aulacogen is not the continuation of the Mesozoic aulacogen, while it is another new rift stage. In the Paleozoic, the Liupanshan—southern Helanshan area is part of the back-arc basins of north Qilian ocean. 8. The Helanshan "alacogen" is connected with the north margin of north China block, not end at the north of Zhouzishan area like "appendices". Also, I think the upper Devonian basin as the beginning stage of the extensional early Carboniferous basins, not as a part of the foreland basins of Silurian period, not the collision rift. 9. The controlling factor of the difference of the deformation styles of the north-west margin and the south-west margin is the difference of the basements and adjacent tectonic units of the two parts.