Structures on sliding base subject to horizontal and vertical motions

In this paper particular investigation is directed towards the combined effects of horizontal and vertical motions of real earthquakes to structures resting on sliding base. A simplified method is presented to treat the nonlinear effects of time dependent frictional force of the sliding base as a function of the vertical reaction produced by the foundation. As an example, the El Centro 1940 earthquake record is used on a structural model to show the structural responses due to a sliding base with different frictional and stiffness characteristics. The study shows that vertical ground motion does affect both the superstructure response and the base sliding displacement. Nevertheless, the sliding base isolator is shown to be effective for the reduction of seismic response of a superstructure.

Peierls-Nabarro model of interfacial misfit dislocation: An analytic solution

We propose a method to treat the interfacial misfit dislocation array following the original Peierls-Nabarro's ideas. A simple and exact analytic solution is derived in the extended Peierls-Nabarro's model, and this solution reflects the core structure and the energy of misfit dislocation, which depend on misfit and bond strength. We also find that only with beta < 0.2 the structure of interface can be represented by an array of singular Volterra dislocations, which conforms to those of atomic simulation. Interfacial energy and adhesive work can be estimated by inputting ab initio calculation data into the model, and this shows the method can provide a correlation between the ab initio calculations and elastic continuum theory.

Modeling Study on the Characteristics of Laminar and Turbulent Argon Plasma Jets Impinging Normally upon a Flat Plate in Ambient Air

Modeling study is performed to compare the flow and heat transfer characteristics of laminar and turbulent argon thermal-plasma jets impinging normally upon a flat plate in ambient air. The combined-diffusion-coefficient method and the turbulence-enhanced combined-diffusion-coefficient method are employed to treat the diffusion of argon in the argon-air mixture for the laminar and the turbulent cases, respectively. Modeling results presented include the flow, temperature and argon concentration fields, the air mass flow-rates entrained into the impinging plasma jets, and the distributions of the heat flux density on the plate surface. It is found that the formation of a radial wall jet on the plate surface appreciably enhances the mass flow rate of the ambient air entrained into the laminar or turbulent plasma impinging-jet. When the plate standoff distance is comparatively small, there exists a significant difference between the laminar and turbulent plasma impinging-jets in their flow fields due to the occurrence of a large closed recirculation vortex in the turbulent plasma impinging-jet, and no appreciable difference is found between the two types of jets in their maximum values and distributions of the heat flux density at the plate surface. At larger plate standoff distances, the effect of the plate on the jet flow fields only appears in the region near the plate, and the axial decaying-rates of the plasma temperature, axial velocity and argon mass fraction along the axis of the laminar plasma impinging-jet become appreciably less than their turbulent counterparts.

A Study of Composite Beam with Shape Memory Alloy Arbitrarily Embedded under Thermal and Mechanical Loadings

The constitutive relations and kinematic assumptions on the composite beam with shape memory alloy (SMA) arbitrarily embedded are discussed and the results related to the different kinematic assumptions are compared. As the approach of mechanics of materials is to study the composite beam with the SMA layer embedded, the kinematic assumption is vital. In this paper, we systematically study the kinematic assumptions influence on the composite beam deflection and vibration characteristics. Based on the different kinematic assumptions, the equations of equilibrium/motion are different. Here three widely used kinematic assumptions are presented and the equations of equilibrium/motion are derived accordingly. As the three kinematic assumptions change from the simple to the complex one, the governing equations evolve from the linear to the nonlinear ones. For the nonlinear equations of equilibrium, the numerical solution is obtained by using Galerkin discretization method and Newton-Rhapson iteration method. The analysis on the numerical difficulty of using Galerkin method on the post-buckling analysis is presented. For the post-buckling analysis, finite element method is applied to avoid the difficulty due to the singularity occurred in Galerkin method. The natural frequencies of the composite beam with the nonlinear governing equation, which are obtained by directly linearizing the equations and locally linearizing the equations around each equilibrium, are compared. The influences of the SMA layer thickness and the shift from neutral axis on the deflection, buckling and post-buckling are also investigated. This paper presents a very general way to treat thermo-mechanical properties of the composite beam with SMA arbitrarily embedded. The governing equations for each kinematic assumption consist of a third order and a fourth order differential equation with a total of seven boundary conditions. Some previous studies on the SMA layer either ignore the thermal constraint effect or implicitly assume that the SMA is symmetrically embedded. The composite beam with the SMA layer asymmetrically embedded is studied here, in which symmetric embedding is a special case. Based on the different kinematic assumptions, the results are different depending on the deflection magnitude because of the nonlinear hardening effect due to the (large) deflection. And this difference is systematically compared for both the deflection and the natural frequencies. For simple kinematic assumption, the governing equations are linear and analytical solution is available. But as the deflection increases to the large magnitude, the simple kinematic assumption does not really reflect the structural deflection and the complex one must be used. During the systematic comparison of computational results due to the different kinematic assumptions, the application range of the simple kinematic assumption is also evaluated. Besides the equilibrium study of the composite laminate with SMA embedded, the buckling, post-buckling, free and forced vibrations of the composite beam with the different configurations are also studied and compared.

A Pressure-Correction Method And Its Applications On An Unstructured Chimera Grid

In this paper, an unstructured Chimera mesh method is used to compute incompressible flow around a rotating body. To implement the pressure correction algorithm on unstructured overlapping sub-grids, a novel interpolation scheme for pressure correction is proposed. This indirect interpolation scheme can ensure a tight coupling of pressure between sub-domains. A moving-mesh finite volume approach is used to treat the rotating sub-domain and the governing equations are formulated in an inertial reference frame. Since the mesh that surrounds the rotating body undergoes only solid body rotation and the background mesh remains stationary, no mesh deformation is encountered in the computation. As a benefit from the utilization of an inertial frame, tensorial transformation for velocity is not needed. Three numerical simulations are successfully performed. They include flow over a fixed circular cylinder, flow over a rotating circular cylinder and flow over a rotating elliptic cylinder. These numerical examples demonstrate the capability of the current scheme in handling moving boundaries. The numerical results are in good agreement with experimental and computational data in literature. (C) 2007 Elsevier Ltd. All rights reserved.

Information Preservation (IP) Method in Simulation

This paper reviews firstly methods for treating low speed rarefied gas flows: the linearised Boltzmann equation, the Lattice Boltzmann method (LBM), the Navier-Stokes equation plus slip boundary conditions and the DSMC method, and discusses the difficulties in simulating low speed transitional MEMS flows, especially the internal flows. In particular, the present version of the LBM is shown unfeasible for simulation of MEMS flow in transitional regime. The information preservation (IP) method overcomes the difficulty of the statistical simulation caused by the small information to noise ratio for low speed flows by preserving the average information of the enormous number of molecules a simulated molecule represents. A kind of validation of the method is given in this paper. The specificities of the internal flows in MEMS, i.e. the low speed and the large length to width ratio, result in the problem of elliptic nature of the necessity to regulate the inlet and outlet boundary conditions that influence each other. Through the example of the IP calculation of the microchannel (thousands long) flow it is shown that the adoption of the conservative scheme of the mass conservation equation and the super relaxation method resolves this problem successfully. With employment of the same measures the IP method solves the thin film air bearing problem in transitional regime for authentic hard disc write/read head length ( ) and provides pressure distribution in full agreement with the generalized Reynolds equation, while before this the DSMC check of the validity of the Reynolds equation was done only for short ( ) drive head. The author suggests degenerate the Reynolds equation to solve the microchannel flow problem in transitional regime, thus provides a means with merit of strict kinetic theory for testing various methods intending to treat the internal MEMS flows.

Information preservation (IP) method in simulation of internal rarefied gas flows in MEMS

This paper reviews firstly methods for treating low speed rarefied gas flows: the linearised Boltzmann equation, the Lattice Boltzmann method (LBM), the Navier-Stokes equation plus slip boundary conditions and the DSMC method, and discusses the difficulties in simulating low speed transitional MEMS flows, especially the internal flows. In particular, the present version of the LBM is shown unfeasible for simulation of MEMS flow in transitional regime. The information preservation (IP) method overcomes the difficulty of the statistical simulation caused by the small information to noise ratio for low speed flows by preserving the average information of the enormous number of molecules a simulated molecule represents. A kind of validation of the method is given in this paper. The specificities of the internal flows in MEMS, i.e. the low speed and the large length to width ratio, result in the problem of elliptic nature of the necessity to regulate the inlet and outlet boundary conditions that influence each other. Through the example of the IP calculation of the microchannel (thousands m ? long) flow it is shown that the adoption of the conservative scheme of the mass conservation equation and the super relaxation method resolves this problem successfully. With employment of the same measures the IP method solves the thin film air bearing problem in transitional regime for authentic hard disc write/read head length ( 1000 L m ? = ) and provides pressure distribution in full agreement with the generalized Reynolds equation, while before this the DSMC check of the validity of the Reynolds equation was done only for short ( 5 L m ? = ) drive head. The author suggests degenerate the Reynolds equation to solve the microchannel flow problem in transitional regime, thus provides a means with merit of strict kinetic theory for testing various methods intending to treat the internal MEMS flows.

Transition Between Detonation and Deflagration in a Tube with a Cavity

In this paper, the transition of a detonation from deflagration was investigated numerically while a detonation wave propagates in a tube with a sudden change in cross section, referred to as the expansion cavity. The dispersion-controlled scheme was adopted to solve Euler equations of axis-symmetric flows implemented with detailed chemical reaction kinetics of hydrogen-oxygen (or hydrogen-air) mixture. The fractional step method was applied to treat the stiff problems of chemical reaction flow. It is observed that phenomena of detonation quenching and reigniting appear when the planar detonation front diffracts at the vertex of the expansion cavity entrance. Numerical results show that detonation front in mixture of higher sensitivity keeps its substantial coupled structure when it propagates into the expansion cavity. However, the leading shock wave decouples with the combustion zone if mixture of lower sensitivity was set as the initial gas.

Euler Solution Using Adaptive Cartesian Grid With A Gridless Boundary Treatment

A quadtree-based adaptive Cartesian grid generator and flow solver were developed. The grid adaptation based on pressure or density gradient was performed and a gridless method based on the least-square fashion was used to treat the wall surface boundary condition, which is generally difficult to be handled for the common Cartesian grid. First, to validate the technique of grid adaptation, the benchmarks over a forward-facing step and double Mach reflection were computed. Second, the flows over the NACA 0012 airfoil and a two-element airfoil were calculated to validate the developed gridless method. The computational results indicate the developed method is reasonable for complex flows.

适用于中等耦合等离子体的碰撞算子

完全电离等离子体中，当试探粒子分布函数fα是关于试探粒子速度vα的偶函数时，导出了一个新的动力学方程的碰撞算子．该碰撞算子同时包括了大角散射（库仑近碰撞）和小角散射（库仑远碰撞）的二体碰撞的贡献，因此，该碰撞算子同时适用于弱耦合（库仑对数ln∧≥10）和中等耦合（库仑对数2≤ln∧≤10）等离子体．而且经过修改的碰撞算子和Rosenbluth势有直接的联系，当试探粒子和场粒子满足条件mα＜mβ（如电子-离子碰撞或Lorentz气体模型）和｜vα｜〉｜vβ｜时，经约化的电子-离子碰撞算子同最初的Fokker

Free radical scavenging and antioxidant enzymes activation of polysaccharide extract from Nostoc sphaeroides

Nostoc sphaeroides Kuetzing has been used as a traditional medicine in China to treat a variety of ailments. This research identified the antioxidant activities of polysaccharide extract from Nostoc sphaeroides. The extract, which contains 46.2% carbohydrates, exhibited an effective scavenging capability on superoxide radical, hydroxyl radicals in non site-specific as well as site-specific assays, and also performed lipid peroxidation inhibition in a dose-dependent manner. Polysaccharide extract had no 1,1-diphenyl-2-picrylhydrazyl radical scavenging potential at all test concentrations. Activities of superoxide dismutase, catalase, and glutathione peroxidase in human embryo kidney 293 cells were increased effectively when Nostoc sphaeroides extract was applied. These results suggested that the use of N. sphaeroides in treating ailments may be based on the antioxidant capacities of polysaccharide composition.

Annealing behavior of hexagonal phase content in cubic GaN thin films grown on GaAs (001) by MOCVD

The annealing behavior of the hexagonal phase content in cubic GaN (c-GaN) thin films grown on GaAs (001) by MOCVD is reported. C-GaN thin films are grown on GaAs (001) substrates by metalorganic chemical vapor deposition (MOCVD). High temperature annealing is employed to treat the as-grown c-GaN thin films. The characterization of the c-GaN films is investigated by photoluminescence (PL) and Raman scattering spectroscopy. The change conditions of the hexagonal phase content in the metastable c-GaN are reported. There is a boundary layer existing in the c-GaN/GaAs film. When being annealed at high temperature, the intensity of the TOB and LOB phonon modes from the boundary layer weakens while that of the E-2 phonon mode from the hexagonal phase increases. The content change of hexagonal phase has closer relationship with annealing temperature than with annealing time period.

西藏胡黄连和鸡矢藤的化学成分及黄芪多糖的提取工艺研究

本论文由四部分组成，前三部分为实验论文，第四部分为文献综述。第一、二部分分别报道了中药西藏胡黄连和鸡矢藤的化学成分研究结果。从两种药用植物中共分离和鉴定了32个化学成分，其中3个为新化合物。第三部分为黄芪多糖的提取工艺研究。第四部分概述了近年来植物多糖的研究进展。 第一章为西藏胡黄连化学成分研究。通过正、反相硅胶柱层析等分离方法从药用植物西藏胡黄连（Picrorhiza scrophulariiflora Pennell）的根茎中共分离纯化出7个化合物。运用MS、1H-NMR、13C-NMR、DEPT、HSQC和HMBC等现代谱学方法，结合理化分析对这些化合物的结构进行了分析鉴定。7个化合物中有两个是酚性的葡萄糖苷类成分：西藏胡黄连酚苷D (1)、4-O-β-D-(6-O-vanilloyl glucopyranosyl) vanillic acid (6)；四个苯乙基苷类化合物：plantamajoside (2)、plantainoside D (3)、西藏胡黄连苷A (4) 和西藏胡黄连苷F (5)；一个苯基小分子化合物：香豆酸甲酯 (7)。其中化合物1和5未见文献报道，确定为新化合物；化合物3为首次从该种植物中分到。 第二章为鸡矢藤化学成分研究。从鸡矢藤（Paederia scandense (Lour) Merrill）全草中分离出25个化合物，通过理化常数和波谱数据鉴定了它们的结构。25个化合物中包括一个蒽醌类成分：茜根定-1-甲醚 (1)；两个香豆素：异东莨菪香豆素 (2)和5-羟基-8-甲氧基吡喃香豆素 (3)；两个香豆素-木脂素化合物：臭矢菜素 B (4)和臭矢菜素 D (5)；一个木脂素：异落叶松树脂醇 (6)；两个黄酮：diadzein (7)和蒙花苷 (8)；三个三萜类化合物：齐墩果酸 (9)、乌苏酸 (10)和 3-O-β-D-吡喃葡萄糖基乌苏烷 (11)；三个甾体及其糖苷：b-谷甾醇 (12)、胡萝卜苷 (13)和(24R)-豆甾-4-烯-3-酮 (14)；六个小分子化合物：对羟基苯甲酸 (15)，咖啡酸 (16)，香豆酸 (17)，丁烯二酸 (18)，3,5-二甲氧基-4-羟基苯甲酸(19)，咖啡酸-4-O-β-D-吡喃葡萄糖苷(20)；五个环烯醚萜类化合物：鸡矢藤苷 (21)，鸡矢藤酸 (22)，鸡矢藤酸甲酯 (23)，saprosmoside E (24)和paederoside B (25)。其中化合物25未见文献报道，为新化合物。化合物1～8、11、14、15～20为首次从该化合物中分离得到。同时对鸡矢藤中环烯醚萜类化合物做了高效液相-串联质谱(HPLC-MSn)分析，探讨了这类化合物的质谱裂解规律。 第三章为黄芪多糖的提取工艺研究。首先确定了黄芪多糖含量的测定方法，并进行了方法学验证；其次探讨了黄芪中黄芪多糖的提取工艺，确定以酶法-Sevag法联用来去除黄芪多糖中的蛋白质，可使其提取物中黄芪多糖总含量达到70％以上。 第四章为近年来植物多糖的研究进展。主要包括植物多糖的提取纯化、多糖的定性定量检测方法、多糖的结构分析和多糖的药理活性。 This dissertation consists of four parts. The first and second parts reports the studies on the chemical constituents of medicinal plants of Picrorhiza Scrophulariiflora and Paederia scandens. The third part is about the extract technique of Astragalan Polysaccharide (APS). The last part reviews the progress of the studies on plant polysaccharides. 　 The first chapter is about the chemical constituents of P. Scrophulariiflora which is widely used as an important medicine to treat various immune-related diseases. A new phenyl glycoside, scrophenoside D (1) and a new phenylethyl glycoside, scroside F (5), together with five known compounds, plantamajoside (2), plantainoside D (3), scroside A (4), 4-O-β-D-(6-O-vanilloylglucopyranosyl) vanillic acid (6); and methyl-p-coumarate (7) were isolated from the stems of P. scrophulariiflora. Their structures were elucidated by spectroscopic and chemical methods. The second chapter is about the chemical constituents of medicinal herb of P. scandens. Twenty-five compounds were isolated and purified by normal and reversed phase silica gel column chromatography. By physicochemical properties and spectral analysis, their structures were identified as rubiadin-1-methylether (1), isoscopoletin (2), 5-hydroxyl-8-methoxyl-coumarin (3), cleomiscosin B (4), cleomiscosin D (5), isolariciresinol (6), diadzein (7), linarin (8), oleanolic acid (9), ursolic acid (10), 3-O-β-D-glucopyranosyloxyl-ursane (11), b-sitosterol (12), b-daucosterol (13), (24R)-stigmast-4-ene-3-one (14), p-hydroxyl-benzoic acid (15), caffic acid (16), coumaric acid (17), trans-butenedioic acid (18), 3,5-dimethoxyl-4-hydroxylbenzoic acid (19), caffeic acid 4-O-β-D-glucopyranoside (20), paederoside (21), paederosidic acid (22), paederosidic acid methyl ester (23), saprosmoside E (24), paederoside B (25). Among them, compound 25 is a new compound. Compounds 1～8、11、14、15～20 were isolated from this plant for the first time. Futhermore, we studied the HPLC-MSn analysis and investigation of fragmentation behavior of the sulfur-containing iridoid glucosides. The third chapter is about the extracting process of Astragalan Polysaccharide (APS). The method of the content determination is built. The optimum condition of extraction of polysaccharides from Radix Astragali is defined and the more effective way to remove protein is combined enzyme method with Sevag method, by which the content of polysaccharides extract can be up to 70%. The last part is a review of the research progress of the plant polysaccharides, which includes its extraction, isolation, purification, determination, structure analysis, and pharmacology.

三种藏药材的化学成分研究

本学位论文报道了西藏产三种藏族传统植物药材的化学成分研究。论文由四章组成，前三章是实验部分，分别报道了尼泊尔黄堇(Corydalis hendersonii Hemsl.)、藏波罗花(Incarvillea younghusbandii Sprague)和全缘叶绿绒蒿(Meconopsis interifolia Franch.)的化学成分研究结果。从这三种青藏高原药用植物中共分离鉴定出33 个化合物，其中1 个是新化合物。第四章概述了罂粟科紫堇属植物的化学和药理研究进展。 第一章为尼泊尔黄堇的化学成分研究。通过正、反相硅胶柱色谱等分离方法从药用植物尼泊尔黄堇的地上部分共分离纯化得到12 个化合物。运用MS、1H-NMR、13C-NMR、DEPT、HMBC、NOESY 等现代波谱学方法将它们的结构鉴定为：刺罂粟碱(1) ， 普托品(2) ， 新那亭(3) ， 斯可任(4) ， tetrahydrothalifendine (5) ，9-methyl-decumbenine C (6)，tetrahydroberberrubine (7)，隐品碱(8)，α-别隐品碱(9)，6,7-methylenedioxy-1(2H)-oxoisoquinolinone (10)，6-丙酮基-5,6 -二氢血根碱(11)和β-谷甾醇(12)。其中化合物6 为新化合物，为首次发现的分子骨架上C-9 位连有甲基的苯肽异喹啉类型生物碱。另外，除化合物1 和2 外，其它9 个生物碱（3～11）均为首次从该种植物中分离得到。同时，我们还对对尼泊尔黄堇中的总生物碱进行了串联质谱分析。 第二章为藏波罗花的化学成分研究。从该药用植物的地上部分共分离得到16个化合物，通过理化常数和波谱数据鉴定为：异佛手柑内酯(1)，6-甲氧基当归素(2)，欧前胡素(3)，花椒毒内酯(4)，珊瑚菜素(5)，水合氧化前胡素(6)，rivulobirin A (7)，齐墩果酸甲酯(8)，咖啡酸甲酯(9)，银桦酸(10)，(D)-boschniakinic acid (11)，对羟基苯甲酸(12) ， tert-O-β-D-glucopyranosyl-(R)-heraclenol (13) ， 5-methoxy-8-O-β-D-glucopyranosyloxypsoralen (14)，前胡苷V(15)和苯乙醇-O-β-D-吡喃葡萄糖-(1→2)-O-β-D-吡喃葡萄糖苷(16)。所有以上化合物均为首次从该种植物中分离得到。另外我们还首次对藏波罗花挥发油的化学成分进行了气相色谱-质谱(GC-MS)联用分析，共鉴定出39 个挥发性成分。 第三章为全缘叶绿绒蒿化学成分的分离鉴定。从传统藏药材全缘叶绿绒蒿地上部分共分离纯化出8 个化合物。通过理化常数和波谱数据将他们的结构分别鉴定为：去甲血根碱(1)，β-谷甾醇(2)，3-羟基-齐墩果烷-12(13)-烯-30-酸(3)，6-丙酮基-5,6-二氢血根碱(4)，木犀草素(5)，胡萝卜苷(6)，quercetin 3-O-β-D-glucopyranosyl-(1→6)-β-D-glucopyranoside (7)和普托品(8)。其中化合物1，4 和7 为首次从该种药用植物中分离得到。 第四章为综述，总结和归纳了近年来罂粟科紫堇属植物的化学和药理研究进展。 This dissertation consists of four parts. The first, second and third parts report the studies on the chemical constituents from the medicinal plants of Corydalis hendersonii, Incarvillea younghusbandii and Meconopsis interifolia. The forth part reviews the progress of the studies on Corydalis species. The first chapter is about the isolations and identifications of alkalids from the aerial parts of C. hendersonii which is a traditional Tibetan medicine to treat febrifuge, high blood pressure and hepatitis. A new isoquinoline alkaloid, 9-methyl-decumbenine C (6), together with ten known alkaloids, stylopine (1), protopine (2), canadine (3), scoulerine (4), tetrahydrothalifendine (5), tetrahydroberberrubine (7), cryptopine (8), α-allocryptopine (9), 6,7-methylenedioxy-1(2H)-isoquinolinone (10) and 6-acetonyl-5,6-dihydrosanguinarine (11), and β-sitosterol (12) were isolated. Their structures were elucidated by spectroscopic methods. Furthermore, the total alkaloids were analyzed by ESI-MSn. The second chapter is about the isolations and identifications of chemical constituents from the aerial parts of I. younghusbandii. Sixteen compounds were isolated and purified by normal and reversed phase silica gel column chromatography. By spectral analysis, there structures were identified as isobergapten (1), sphondin (2), imperatorin (3), xanthotoxin (4), phellopterin (5), heraclenol (6), rivulobirin A (7), methyl oleanolate (8), methyl caffeate (9), grevillic acid (10), (D)-boschniakinic acid (11), 4-hydroxybenzoic acid (12), tert-O-β-D-glucopyranosyl-(R)-heraclenol (13), 5-methoxy-8-O-β-D-glucopyranosyloxypsoralen (14), decuroside Ⅴ(15), and phenylethyl-O-β-Dglucopyranosyl-(1→2)-β-D-glucopyranoside (16). All of these compounds were isolated from this plant for the first time．By the way, the chemical components of the essential oil from I. younghusbandii were analyzed by GC-MS for the first time. The third chapter is about the the isolations and identifications of the chemical constituents of M. interifolia. Eight compounds were isolated and identified as norsanguinarine (1), β-sitosterol (2), 3-hydroxyolean-12(13)-en-30-oic acid (3), 6-acetonyl-5,6-dihydrosanguinarine (4), luteolin (5), daucosterol (6), quercetin 3-O-β-D-glucopyranosyl-(1→6)-β-D-glucopyranoside (7) and protopine (8). The compounds 1, 4 and 7 were isolated from this herb for the first time. The last chapter is a review of the research progress of the studies on Corydalis species, which includes the chemical constituents in this genus and their pharmacology.

PVA降解菌的产酶条件及特性研究

目前对PVA生物降解研究重点逐渐转移到对PVA降解菌和PVA降解酶的研究开发上，随着对PVA降解高效新菌株的不断发现和PVA降解酶作用机理和分泌机制的深入了解，利用高效微生物或酶法治理PVA这类高聚物的污染将具有较大的应用潜力。本论文研究工作正是基于这种客观条件下进行的，对本实验室前期分离的PVA降解菌株P1、共生菌B1+B2、Pa、Pb为研究对象，重点研究了菌株P1和共生菌B1+B2的产酶条件和产酶特性，验证找出了影响菌株P1产酶的生长因子，论证了菌株B1+B2的产酶特性，优化得出了菌株B1+B2的最佳产酶条件；然后对共生菌B1+B2的PVA降解酶的稳定性进行了研究；最后研究了最佳组合菌的产酶特性和最佳产酶条件。主要研究结果如下： 1 通过对菌株P1产酶因子的研究，找出了核黄素是菌株P1产酶的必须因子，在以淀粉为碳源时，核黄素只是产酶的必须因子，而不是菌体生长的必须因子；在以PVA为碳源时，核黄素既是生长的必须因子，也是产酶的必须因子，是菌株P1的生长因子。 2 对共生菌B1+B2的产酶条件和产酶特性进行了研究，并通过正交实验找出了影响菌株产酶的主要条件和菌株产酶的最佳条件。 3 对共生菌PVA降解酶的稳定性进行了研究，确定了影响酶稳定性的主要理化条件。 4 通过对菌株降解性能的比较，确定菌株Pa、Pb、共生菌、P1的作为组合菌的组成菌，然后通过复配实验确定出菌株的最佳组合为菌株Pa、P1、共生菌，最后通过正交实验确定最佳组合菌的最佳配比。 5对影响组合菌产酶的因素进行了研究，通过正交实验确定了影响组合菌产酶的主要因素和最佳产酶条件。 本文通过对PVA降解菌株产酶条件和特性的研究，旨在为PVA降解菌生产酶制剂及进一步优化PVA降解菌在PVA废水治理中的应用提供理论和应用依据。 Now the PVA-degrading bacteria and polyvinyl alcohol-degrading enzyme are the key studies on the PVA biological degradation. It has great application potential using special bacteria and enzyme to treat pollution of PVA, with some high efficient Strain and enzyme were found. The study of this paper was based on that objective condition. The stain P1, symbiotic bacteria B1+B2, stain Pa and strain Pb were studied .The conditions of enzyme production and enzyme production characteristic of stain P1, symbiotic bacteria B1+B2 were our key study, we tested and verified the growth factor which effected enzyme production of strain P1, demonstrated enzyme production characteristic of symbiotic bacteria B1+B2, optimized and obtained the optimum conditions of enzyme production; then we studied the stability of polyvinyl alcohol-degrading enzyme of strain B1+B2; last the enzyme characteristic and the optimum conditions of alcohol-degrading enzyme production of optimum combination stains were studied. The main study results are below: 1. Through the study of enzyme production factor we found that lactoflavin is the necessary factor in strain P1 enzyme production. When we used starch to be carbon energy, lactoflavin is only the necessary factor of enzyme production, but not growth factor. When we used PVA to be carbon energy, lactoflavin was not only the necessary growth factor ,but also the necessary enzyme production factor.So it was the growth factor of strain P1 2. The enzyme production conditions and enzyme production characteristic of symbiotic bacteria B1+B2 were studied. Through the orthogonal experimental design, the main conditions which effected the enzyme production and the optimum conditions of enzyme production were obtained 3. Through the study of the stability of polyvinyl alcohol-degrading enzyme, the main physical and chemical conditions which effected the enzyme stability were 4. The stain P1,symbiotic bacteria B1+B2, stain Pa and strain Pb were selected to form combination bacteria. The stain P1,symbiotic bacteria B1+B2,stain Pa were the optimum combination through duplication experiment. Then the optimum ratio was obtained through orthogonal experiment. 5. Studied the factors which effected the polyvinyl alcohol-degrading enzyme activity, then through orthogonal experiment, the main factors and condition of enzyme production which effected the combination bacteria were achieved. The result of the study was valuable for the ferment of the PVA-degrading enzyme and the optimization of the PVA-degrading performance in the PVA wastewater.