Classification of jinjiang oysters Crassostrea rivularis (Gould, 1861) from China, based on morphology and phylogenetic analysis

The jinjiang oyster Crassostrea rivularis [Gould, 1861. Descriptions of Shells collected in the North Pacific Exploring Expedition under Captains Ringgold and Rodgers. Proc. Boston Soc. Nat. Hist. 8 (April) 33-40] is one of the most important and best-known oysters in China. Based on the color of its flesh, two forms of C rivularis are recognized and referred to as the "white meat" and 11 red meat" oysters. The classification of white and red forms of this species has been a subject of confusion and debate in China. To clarify the taxonomic status of the two forms of C. rivularis, we collected and analyzed oysters from five locations along China's coast using both morphological characters and DNA sequences from mitochondrial 16S rRNA and cytochrome oxidase 1, and the nuclear 28S rRNA genes. Oysters were classified as white or red forms according to their morphological characteristics and then subjected to DNA sequencing. Both morphological and DNA sequence data suggest that the red and white oysters are two separate species. Phylogenetic analysis of DNA sequences obtained in this study and existing sequences of reference species show that the red oyster is the same species as C. ariakensis Wakiya [1929. Japanese food oysters. Jpn. J. Zool. 2, 359-367.], albeit the red oysters from north and south China are genetically distinctive. The white oyster is the same species as a newly described species from Hong Kong, C. hongkongensis Lam and Morton [2003. Mitochondrial DNA and identification of a new species of Crassostrea (Bivalvia: Ostreidae) cultured for centuries in the Pearl River Delta, Hong Kong, China. Aqua. 228, 1-13]. Although the name C. rivularis has seniority over C. ariakensis and C. hongkongensis, the original description of Ostrea rivularis by Gould [1861] does not fit shell characteristics of either the red or the white oysters. We propose that the name of C. rivularis Gould [1861] should be suspended, the red oyster should take the name C. ariakensis, and the white oyster should take the name C. hongkongensis. (C) 2004 Elsevier B.V. All rights reserved.

Classification of common oysters from North China

Oysters are commonly found on rocky shores along China's northern coast, although there is considerable confusion as to what species they are. To determine the taxonomic status of these oysters, we collected specimens from nine locations north of the Yangtze River and conducted genetic identification using DNA sequences. Fragments from three genes, mitochondrial 165 rRNA, mitochondria! cytochrome oxidase I (COI), and nuclear 285 rRNA, were sequenced in six oysters from each of the nine sites. Phylogenetic analysis of all three gene fragments clearly demonstrated that the small oysters commonly found on intertidal rocks in north China are Crassostrea gigas (Thunberg, 1793), not C. plicatula (the zhe oyster) as widely assumed. Their small size and irregular shell characteristics are reflections of the stressful intertidal environment they live in and not reliable characters for classification. Our study confirms that the oysters from Weifang, referred to as Jinjiang oysters or C. rivularis (Gould, 1861), are C. ariakensis (Wakiya, 1929). We found no evidence for the existence of C. talienwhanensis (Crosse, 1862) and other Crassostrea species in north China. Our study highlights the need for reclassifying oysters of China with molecular data.

First description of the male and redescription of the female of Philometra clavaeceps Dogiel and Akhmerov, 1959 (Nematoda : Philometridae), a parasite of east Asian cyprinid fish

The first description of the male and a redescription of the female of the nematode Philometra clavaeceps Dogiel and Akhmerov, 1959, a parasite of east Asian cyprinids, are presented on the basis of specimens collected from Culter erythropterus Basilewsky and Culler dabryi Bleeker from Liangzi Lake (the Yangtze River basin), Hubei Province, central China. Gravid females from the fish abdominal cavity, penetrating often into ovaries, occurred in May-June, whereas conspecific males and young mature females on the swimbladder were recorded in January. Philometra clavaeceps seems to have a pronounced annual maturation cycle in the locality. The finding of P. clavaeceps in C. dabryi represents a new host record.

Redescription of Camallanus hypophthalmichthys Dogel and Akhmerov, 1959 (Nematoda : Camallanidae) and its first record from fishes in China

The nematode Camallanus hypophthalmichthys Dogel and Akhmerov, 1959 is redescribed from specimens collected from the intestine of the bighead carp Aristichthys nobilis, from Liangzihu Lake (Yangtze River basin), Hubei Province, central China. The light and scanning electron microscopical examination made it possible to study in detail the morphology of this so far little-known species and to confirm its validity. The main specific features of C. hypophthalmichthys distinguishing it from the most similar Camallanus spp. is the presence of 3 small caudal processes on the male tail tip, 13-16 longitudinal ridges on the inner surface of the valve of the buccal capsule, and the arrangement of preanal and postanal genital papillae in the male. This finding represents a new host record, the first record of this parasite in the Yangtze River basin, and the first documented record of C. hypophthalmichthys from China. Camallanus hypophthalmichthys is considered a specific intestinal parasite of fishes of the cyprinid Hypophthalmichthyinae.

Nonequilibrium microstructures and their evolution in a Fe-Cr-W-Ni-C laser clad coating

The laser-solidified microstructural and compositional characterization and phase evolution during tempering at 963 K were investigated using an analytical transmission electron microscope with energy dispersive X-ray analysis. The cladded alloy, a powder mixture of Fe, Cr, W, Ni, and C with a weight ratio of 10:5:1:1:1, was processed with a 3 kW continuous wave CO2 laser. The processing parameters were 16 mm/s beam scanning speed, 3 mm beam diameter. 2 kW laser power, and 0.3 g/s feed rate. The coating was metallurgically bonded to the substrate, with a maximum thickness of 730 mu m, a microhardness of about 860 Hv and a volumetric dilution ratio of about 6%. Microanalyses revealed that the cladded coating possessed the hypoeutectic microstructure comprising the primary dendritic gamma-austenite and interdendritic eutectic consisted of gamma-austenite and M7C3 carbide. The gamma-austenite was a non-equilibrium phase with extended solid solution of alloying elements and a great deal of defect structures, i.e. a high density of dislocations, twins, and stacking faults existed in gamma phase. During high temperature aging, in situ carbide transformation occurred of M7C3 to M23C6 and M6C. The precipitation of M23C6, MC and M2C carbides from austenite was also observed.

铁基抗高温磨损激光熔覆涂层强韧设计和研究II:Fe-Cr-C-W-Ni激光熔覆层的微观组织及性能

本文以对热工模具进行失效分析的基础上，利用激光熔覆技术，在５ＣｒＭｎＭｏ基础上设计并制备强韧兼备的抗高温磨损涂层。

裂纹顶端位错的运动和小范围屈服的K_(Ⅱc)

本文从裂纹顶端位错运动的简化模型估计形成塑性区所消耗的功;从而计算临界裂纹扩展力。由于Ⅰ型加载和Ⅱ型加载的应力状态有所不同,裂纹顶端塑性功耗也会不一样。基于上述思想,考虑了小范围屈服的K_(Ⅰc)和K_(Ⅱc)的关系,得出K(Ⅱc)>K(Ⅰc)的结论,符合实验结果;并就K(Ⅱc)/K(Ⅰc)的比值与材料性能和温度的关系作了讨论。

铁基抗高温磨损激光熔覆涂层强韧设计和研究 Ⅱ:Fe-Cr-C-W-Ni激光熔覆层的微观组织及性能

利用ＯＭ、ＳＥＭ、ＴＥＭ研究了Ｆｅ－Ｃｒ－Ｃ－Ｗ－Ｎｉ激光熔覆涂层熔覆态及其高温时效态的微观组织结构。结果表明激光熔覆层组织细小，具有强韧两相组成（奥氏体和Ｍ_７Ｃ_３碳化物）的微观结构特征，高温时效处理组织中有Ｍ_（２３）Ｃ_６、Ｍ_６Ｃ、Ｍ_２Ｃ等新碳化物形成。显微硬度和冲击磨损实验证实了激光熔覆态和峰值时效态熔覆层均具有良好的力学性能。

钾离子通道Kir2.1/C-末端功能区的分子动力学模拟

<正>内向整流型钾离子通道(Kir,inwardlyrectifyingpotassium)在细胞激活、细胞内外钾离子K~+的动态平衡、胰岛素分泌等细胞生理过程中起重要作用。而细胞内各种不同因素和第二信使对Kir的调控则是实现其不同生理功能的途径。已有实验结果表明,4,5二磷酸磷脂酰肌醇(PIP2,phosphatidylinositol4,5-bisphosphate)与Kir相互作用的强弱决定了Kir对各种调控因素的响应程度。根据Kir2.1与Kir3.1胞内C-末端X-ray

Visual C++ 6.0学习教程

c="http://img3.douban.com/mpic/s1281493.jpg" border="0" alt="" hspace="8" width="102" height="144" align="left" />MicrosoftVisualC���十6.0作为Microsoft Visual Studio的重要组成部分，包含了迄今为止功能最为强大的基于Windows的应用框架，在同类产品中处于领先地位。VisualC���十6.0是Microsoft迄今为止最全面、最完善的程序开发工具，为了适应各种编程风格，该软件提供了各种各样的辅助工具，在发挥编程能力和提高灵活性方面达到了空前的水平。与以往VisualC���十的各种版本相比较，VisualC���十6.0在编程环境、程序语言技术等方面做了许多改进，从而使VisualC���十更加适合专业程序员快速进行应用程序的开发。

本书内容丰富、图文并茂，是一本适合各种读者学习VisualC���十6.0的优秀参考书。

目 录
第一章 VisualC���十6.0简介及安装
1.1VisualC���十6.0新特性
1.2viSualC���十6.0开发环境简介
1.3如何学习使用VisualC���十6.0
1.4VisualC���十6.0的安装
第二章 走进C���十的世界
2.1类和对象的简介
2.2继承和多态性――一个具体的例子
2.3内嵌对象
2.4在栈中申请对象
2.5全程对象的申请
2.6对象之间的相互关系――指针数据成员
2.7this指针的使用
2.8对指针的引用
2.9友元类和友元函数
2.10静态类成员
2.11重载运算符
2.12从代码中分离出类定义
2.13匈牙利表示法
第三章 VisualC���十6.0的编程环境
3.1VisualC���十6.0主窗口
3.2VisualC���十6.0工具栏
3.3VisualC���十6.0菜单栏
3.4项目与项目工作区
3.5资源与资源编辑器
第四章 编一个最简单的VC���十程序
4.1什么是AppWizard？
4.2迎接你的第一个AppWizard程序
4.3“Iamaprogrammer.”在哪儿？
第五章 程序框架入门
5.1一个简化过的程序框架
5.2WinMain（）：第一个动作
5.3登记窗口类
5.4创建一个窗口
5.5显示窗口
5.6显示出那条消息
5.7窗口类与窗口对象
第六章 消息循环
6.1在消息循环中兜圈子
6.2对事件做出响应：WindowFun（）
6.3响应不同的消息
6.4现在你还跟得上吗？
6.5设备界面进行交互
第七章 精通程序框架
7.1WinMain（）函数在哪儿？
7.2应用程序框架和源文件
7.3工具条、状态条和打印等选项
7.4程序的控制流程
第八章 使用classWizard编程
8.1使用ClassWizard添加消息处理函数
8.2classWizard功能介绍
8.3传送鼠标消息
8.4保存鼠标绘图的信息
第九章 视图与文档
9.1Document－View模式
9.2从视图中分离出文档
9.3保存文档
9.4再访MyProg2.cpp
第十章 对象连接与嵌入（OLE）及其自动化
10.1公共对象模式（COM）
10.2类厂（classfactory）
10.3OLE自动化
10.4IDispatch接口
第十一章 动态连接库（DLLs）
11.1为什么使用DLL
11.2传统的DLL
11.3MFC���DLL
11.4MyProg4A――编写自己的类库扩展DLL
11.5MyProg4B――使用MFC���扩展DLL
11.6资源访问
第十二章 图形设备接口
12.1设备环境类
12.2GDI对象
12.3Windows的颜色映射
12.4映射方式
12.5字体
12.6MyProg3例程序
12.7MyProg3B程序
12.8MyPr0g3C���程序――使用CScrollView
第十三章 对话框
13.1在状态条上显示对话控件的帮助信息
13.2利用Fi1eOpen通用对话框打开多个文件
13.3定制通用文件对话框
13.4扩展和缩减一个对话框
13.5显示一个模式或无模式对话框
13.6编写定制的DDX/DDV例程
第十四章 剖析工具Spy十＋
14.1窗体
14.2消息
14.3进程与线程
第十五章 代码调试
15.1TRACE
15.2调试框架
15.3自我诊断
15.4调试代码的作用
15.5用Dump（）显示对象的信息
15.6检查内存

Development And Characterization Of Composite Ni-Cr-C-Caf2 Laser Cladding On Gamma-Tial Intermetallic Alloy

A process of laser cladding Ni-CF-C-CaF2 mixed powders to form a multifunctional composite coatingd on gamma-TiAl substrate was carried out. The microstructure of the coating was examined using XRD, SEM and EDS. The coating has a unique microstructure consisting of primary dendrite or short-stick TiC and block Al4C3 carbides reinforcement as well as fine isolated spherical CaF2 solid lubrication particles uniformly dispersed in the NiCrAlTi (gamma) matrix. The average microhardness of the composite coatings is approximately HV 650 and it is 2-factor greater than that of the TiAl substrate. (C) 2008 Elsevier B.V. All rights reserved.