山东山旺中新世古气候的定量研究

本论文研究的创新之处是在高分辨率的地层层序上选定3米X3米的工作剖面，逐层采集标本，定量研究山旺中新世古气候的变化过程。主要有以下新的认识和结论： 植物化石的数量和种类在地层层序上的变化很大。第5层、第6层、第7层、第13层、第15层和第16层的标本丰富，可以进行CLAMP分析。 第5层、第6层和第7层的泥岩中保存有丰富的植物化石，运用荧光显微分析技术可以清晰地观察到泥岩中植物的气孔和表皮细胞形态。 山旺地区中新世年均温（MAT）在9.5℃和11.3℃之间。较热月份平均温度（WMMT）在19.9 ℃和22.4 ℃之间。生长季月数（GSL）为5.9－－6.9个月。生长季节平均降水量（MGSP）为860－－1770 mm。生长季月平均降水量（MMGSP）为152－－253mm，生长季三个连续最湿的月份降水量（3－WET）为530－－920mm，三个连续最旱的月份的降水量（3－DRY）为286－－687mm。相对湿度（Rel. Hum）在73％以上，高达80％。特殊湿度（q-Specific Humidity）在5.9－－6.7之间，热熵值（H－Enthalpy）为298.5－－304.5。 气候参数在地层层序上存在变化。CLAMP分析的结论与最近亲缘种分析（NLR）的结论相似。CLAMP分析的年均温比现在山旺的年均温12.5℃低，比同层的线性分析结果低3℃。与海底有孔虫氧同位素的研究结论一致。山东山旺中新世古气候的研究可以作为中中新世全球气候变化研究的一个标尺。

新生代孢粉分析与古气候定量重建的研究

定量重建地球生态系统的气候参数是当前国际古气候研究的目标之一. 自20世纪70年代以来, 尤其是在海洋学研究领域, 新技术的不断应用使得定量的古气候研究蓬勃发展. 相比之下陆地古气候参数的重建要困难得多, 陆地植物作为对环境的良好记录，一直备受重视. 近数十年来, 国际上广泛开展了利用植物材料定量研究气候的探索, 大量新的方法层出不穷. 德国科学家Mosbrugger和Utescher在1997年倡导的共存分析法(The Coexistence Approach)就是其中之一, 它依据现存最近亲缘类群原理以及植物分布与气候的关系原理, 找到化石植物群中各类群的现存最近亲缘类群对各气候参数的耐受范围; 并将各亲缘类群对同一气候参数的耐受范围叠加一起, 获得对该气候参数的共存区间, 用该区间作为对古气候参数的精确估测. 本文首先阐述在原文位于展开讨论的共存分析的理论基础——探讨植物分布与气候之间关系的耐受性理论. 并以此为指导, 对在该方法中气候台站的选用方法作了改进, 气象台站的选择应以植物的标本记录点为基础: 即使在某一特定的植物分布区内部也应该查看气象台站所在县级行政区域是否有该植物的标本采集信息, 并以此为依据来决定是否选用该气象台站的记录; 选用的气象台站的数量多寡应该以植物分布点的多少来决定. 以此为基础, 我们采用中国的植物分布与气象记录数据, 利用孢粉学的研究结果，定量重建了我国新生代三个地点的古气候参数, 结果如下: 1.内蒙古呼伦湖地区全新世初期气候 MAT: 4.4~10.2℃; MWMT: 22.9~24.1℃; MCMT: -18~-9.1℃; DT: 33.5~40.9℃; MAP: 354.3~686.7mm; MMaP: 103.8~191.9mm; MMiP: 2.7~7.3mm. 我们以扎赉诺尔地区的孢粉学研究为基础, 依据孢粉和盘星藻(Pediastrum Meyen)提供的环境信息并结合前人工作, 恢复了全新世初升温期的植被变化; 定量重建了10.4~10.2kaB.P.时的气候, 为全面理解呼伦湖地区的气候变化以及东亚的夏季风变化提供新的依据. 2.云南洱源上新世气候 MAT: 13.3~18.6℃; MWMT: 24.6~27.5℃; MCMT: 1.9~12.1℃; DT: 14.2~16.6℃; MAP: 619.9~1484.3mm; MMaP: 143.8~245.6mm; MMiP: 12.7~16.4mm. 该结果与羊邑、龙陵上新世古气候及三地的现代气候分析对比表明, 在上新世, 三地年均温符合纬向变化, 而降水量则基本一致. 在现代，洱源与羊邑在气候与植被上很相近, 且与上新世相差不大; 而龙陵地区则发生了显著的变化, 年均温比上新世低, 而降水量则大幅增加. 该变化指示了上新世以来作为青藏高原东部边缘的龙陵地区可能出现了地形的抬升. 3.吉林珲春始新世和中新世气候 始新世: MAT: 14.3~14.9℃; MWMT: 25~26.3℃; MCMT: 1.9~3.7℃; DT: 21.7~23℃; MAP: 797.5~1344mm; MMaP: 185.3~209.8mm; MMiP: 14.2~16.4mm. 中新世: MAT: 14.3~14.9℃; MWMT: 24.3~25.4℃; MCMT: 2.1~3.7℃; DT: 21.7~22.7℃; MAP: 658.7~817.7mm; MMaP: 158.9~174.6mm; MMiP: 7.4~7.6mm. 通过对两个时段的气候参数对比, 始新世时, 吉林珲春地区的气候属于北亚热带气候; 中新世时气候发生了改变, 归属于暖温带南部的气候, 改变了前人关于中新世也归属于被亚热带的认识, 这反映了我国东北部地区与全球新生代降温总趋势具有一定的同步性.

海南岛长昌盆地始新世孢粉植物群及其古植被和古气候研究

植物作为气候环境变化的敏感指示物，能够提供许多有价值的气候环境变化信息，通过保存在地层中的植物化石和孢粉研究第三纪气候和环境变化已成为当今国际上的重要研究领域。 近年来，随着许多定量化的古气候分析方法(如：叶相分析法、树木年轮气候学法、共存分析法和特有种气候分析法）的不断出现，研究精度愈来愈高，已从定性描述过渡到定量化重建的阶段。 在本研究论文中，我们利用德国科学家Mosbrugger和Utescher在1997年倡导的共存分析法对海南岛长昌盆地始新世气候进行定量研究，并对盆地当时的古植被进行了重建。 长昌盆地始新世孢粉植物群以被子植物花粉占绝对优势(94.5%)，主要以壳斗科个体极小的三沟、三孔沟花粉为主(88.9%)，其他热带一亚热带分子有枫粉、山矾粉、棕榈粉和桃金娘粉等;裸子植物花粉含量较低(<3%)，以松粉为主，铁杉粉、杉粉和麻黄粉零星出现;蕨类植物孢子含量低(<2.7%)。孢粉组合表明始新世时盆地中央的平原或丘陵地带生长着亚热带常绿落叶阔叶林，在盆地周围的山地生长着温带常绿落叶阔叶林和针叶林植被。 通过共存分析获得的长昌盆地始新世气候参数如下：年均温为14.2 - 19.4oC;最热月均温为24.1-29.1 0C;最冷月均温为1.7-8.6 0C;年较差为18.6-24.6oC;年均降雨量为797.5 -1113.3 mm;最大月降雨量为141.5 -268.1 mm;最小月降雨量为8.9- 14.1 mm。 我们将长昌盆地始新世孢粉植物群和古气候与吉林珲春始新世孢粉植物群和古气候进行比较，结果表明始新世时两地虽然相距23个纬度，但南北气候差异不大，均比较温暖湿润。其可能原因是：一方面，当时我国位于欧亚大陆的东南缘，受大气环流和洋流的影响比较均一;另一方面，始新世时青藏高原抬升并不剧烈，我国大部分地区的地势较为平缓，地面大气层的密度比较均匀，气温保持匀和状态。

黑龙江嘉荫地区古新世孢粉植物群及古植被、古气候研究

植物是环境变化的重要指示物之一。晚白垩至早第三纪时期，全球生态系统发生了剧烈变化，研究这一时期植物对了解地质历史时期环境变化趋势, 认识和保护当今环境有重要意义。我国黑龙江省嘉荫县有这一时期的地层发育，其中乌云煤矿和白山头是主要的露头剖面。前人曾从地质时代、孢粉及植物化石角度对这两个剖面进行过研究，但是仍有部分问题尚存争议。在本项工作中，我们对两个剖面的孢粉样品进行了系统采样，部分孢粉类型同时在光镜和电镜下进行了拍照。我们还对存在争议的这两个剖面的地质时代进行了讨论。同时，首次用共存分析法对这两个剖面的在沉积时期的气候进行了整体及分段的定量重建。另外，我们结合中其它地点的气候重建工作对不同时期的纬度温度梯度进行了研究。 乌云煤矿和白山头两个乌云组剖面的古新世孢粉植物群的研究结果表明：乌云煤矿孢粉植物群主要是与榛属（Corylus），桤木属（Alnus），桦木属（Betula），榆属（Ulmus）及松属（Pinus）有亲缘关系的植物；白山头剖面的孢粉植物类型与乌云煤矿基本一致，但是其中针叶类植物的花粉所占比重较大。 根据乌云煤矿与白山头剖面的孢粉类型在地层中的分布，以及与其它古新世地层的对比，我们认为乌云煤矿与白山头含孢粉段的地质时代为古新世。 用共存分析法得到乌云组古新世气候参数有两组。孢粉类型的共存结果为：年均温14.8-14.9℃，年降水量816-1389mm；植物化石类型的共存结果为：年均温16.3-16.8℃, 年降水：1124-1623mm。对乌云煤矿与白山头两个剖面孢粉带中的孢粉类型的气候参数分别进行共存，结果表明，除乌云煤矿孢粉第三带到第四带外，乌云地区的年均温在整个沉积时期均呈上升趋势；年均降水量的变化趋势与年均温基本一致。 根据从古新世到现代不同地点气候定量重建的年均温参数，我们计算得到了不同时期纬度温度梯度变化的值：<0.1℃/古纬度（古新世）、 0.1℃/古纬度（始新世）、0.45℃/纬度（中新世）、0.55℃/纬度（上新世）。结合当今全球的平均温度梯度值（0.7℃/纬度），我们得出纬度温度梯度的值从古新世以来呈不断上升的趋势。这一结果显示65Ma 以来赤道与极地间的温度差异逐渐增大，同时也提示了全球温度可能呈下降趋势。

石笋微层序列的断代和信号研究

Based on chronological and climatologic analysis of many young stalagmites in Shihua Cave at Beijing and Water Cave in Benxi, Liaoning Province, this dissertation aims to discuss some key points on quantitative reconstruction of high resolution climate change from micro bands time series in young stalagmites. On chronological aspect of micro bands time series in young stalagmite, the uppermost micro bands were testified formed in the sampling year or the year before sampling from long term and in situ experiment in Shihua Cave at Beijing. Have been observed detailed under microscope, the micro bands were counted and compared with high resolution TIMS-230Th or ICP-MS U series dating, the results show that the micro bands are annual bands. The microscopic characteristics of annual bands in North China is as follows after studying lots of young stalagmites: the interface appears to be carved, and there is a light line adjacent to it, which moves back and forth slightly when adjusting the microscope slide. The cross dating of annual bands from different stalagmites is experimented in this thesis. On climatologically aspect of micro bands times series in young stalagmites, one significant problem is that the deposition trend resulting from the variation of the stalagmite shape. Various deposition trends have been discussed and corrected before climatologically analysis of micro bands series. And the whole year in situ observation and analysis of dripping water in Shihua Cave provide us new evidence for climate information reserved in stalagmites micro bands. The stalagmites in the same cave may contain different climate information due to the micro hydrological condition. The annual bands of young stalagmites collected from North China can be used to reconstruct past climate changes quantitatively. The warm season temperature (May, June, July, August) is reconstructed using two annual bands time series from Shihua Cave, Beijing, which corresponds to the warm/cool periods very well in Chinese history documents. The precipitation record of past 500 years is reconstructed using two stalagmite annual bands series from Shihua Cave, which is consistent to the dryness/wetness records derived from historical documents too.

A Quantitative Analysis of the Effect of Laser Transformation Hardening on Crack Driving Force in Steels

A mechanical model of a laser transformation hardening specimen with a crack in the middle of the hardened layer is developed to quantify the effects of the residual stress and hardness gradient on crack driving force in terms of J-integral. It is assumed

Ab Initio Study Of Zno-Based Gas-Sensing Mechanisms: Surface Reconstruction And Charge Transfer

Density functional theory (DFT) calculations were employed to explore the gas-sensing mechanisms of zinc oxide (ZnO) with surface reconstruction taken into consideration. Mix-terminated (10 (1) over bar0) ZnO surfaces were examined. By simulating the adsorption process of various gases, i.e., H-2, NH3, CO, and ethanol (C2H5OH) gases, on the ZnO (10 (1) over bar0) surface, the changes of configuration and electronic structure were compared. Based on these calculations, two gas-sensing mechanisms were proposed and revealed that both surface reconstruction and charge transfer result in a change of electronic conductance of ZnO. Also, the calculations were compared with existing experiments.

Quantitative measurement of domain inversion in RuO2 : LiNbO3 crystal by digital holographic interferometry

We quantitatively study the domain inversion in a RuO2:LiNbO3 crystal wafer by the digital holographic interferometry. The crystal wafer is placed into one arm of a Mach-Zehnder-type interferometer to record a series of holograms. Making use of the angular spectrum backward propagation algorithm, we reconstruct the optical wave field in the crystal plane. The extracted phase difference from the reconstructed optical wave field is a well linear function of the applied external voltage. We deduce that the linear electro-optic coefficient of the detected RuO2:LiNbO3 crystal sample is 9.1x10(-12) m/V. An unexpected phase contrast at the antiparallel domain wall is observed and the influence of the applied external voltage on it is studied in detail. Also the built-in internal field is quantitatively measured as 0.72 kV/mm. (c) 2006 American Institute of Physics.

Wavefront conversion by local volume holograms between cylindrical and plane waves with reconstruction at a different readout wavelength

Based on the two-dimensional coupled-wave theory, the wavefront conversion between cylindrical and plane waves by local volume holograms recorded at 632.8 nm and reconstructed at 800 nm is investigated. The proposed model can realize the 90 degrees holographic readout at a different readout wavelength. The analytical integral solutions for the amplitudes of the space harmonics of the field inside the transmission geometry are presented. The values of the off-Bragg parameter at the reconstructed process and the diffracted beam's amplitude distribution are analysed. In addition, the dependences of diffraction efficiency on the focal length of the recording cylindrical wave and on the geometrical dimensions of the grating are discussed. Furthermore, the focusing properties of this photorefractive holographic cylindrical lens are analysed.

A novel three-dimensional imaging array recording and computational method by means of coded cameras reconstruction

In this paper, we propose a novel three-dimensional imaging method by which the object is captured by a coded cameras array (CCA) and computationally reconstructed as a series of longitudinal layered surface images of the object. The distribution of cameras in array, named code pattern, is crucial for reconstructed images fidelity when the correlation decoding is used. We use DIRECT global optimization algorithm to design the code patterns that possess proper imaging property. We have conducted primary experiments to verify and test the performance of the proposed method with a simple discontinuous object and a small-scale CCA including nine cameras. After certain procedures such as capturing, photograph integrating, computational reconstructing and filtering, etc., we obtain reconstructed longitudinal layered surface images of the object with higher signal-to-noise ratio. The results of experiments show that the proposed method is feasible. It is a promising method to be used in fields such as remote sensing, machine vision, etc. (c) 2006 Elsevier GmbH. All rights reserved.

Rapid quantitative detection of Yersinia pestis by lateral-flow immunoassay and up-converting phosphor technology-based biosensor

Up-converting phosphor technology (UPT)-based lateral-flow immunoassay has been developed for quantitative detection of Yersinia pestis rapidly and specifically. In this assay, 400 nm up-converting phosphor particles were used as the reporter. A sandwich immumoassay was employed by using a polyclonal antibody against F1 antigen of Y. pestis immobilized on the nitrocellulose membrane and the same antibody conjugated to the UPT particles. The signal detection of the strips was performed by the UPT-based biosensor that could provide a 980 nm IR laser to excite the phosphor particles, then collect the visible luminescence emitted by the UPT particles and finally convert it to the voltage as a signal. V-T and V-c stand for the multiplied voltage units for the test and the control line, respectively, and the ratio V-T/V-C is directly proportional to the number of Y pestis in a sample. We observed a good linearity between the ratio and log CFU/ml of Y pestis above the detection limit, which was approximately 10(4) CFU/mI. The precision of the intra- and inter-assay was below 15% (coefficient of variation, CV). Cross-reactivity with related Gram-negative enteric bacteria was not found. The UPT-LF immunoassay system presented here takes less than 30 min to perform from the sample treatment to the data analysis. The current paper includes only preliminary data concerning the biomedical aspects of the assay, but is more concentrated on the technical details of establishing a rapid manual assay using a state-of-the-art label chemistry. (c) 2006 Elsevier B.V. All rights reserved.