384 resultados para Propylene-glycol
em Chinese Academy of Sciences Institutional Repositories Grid Portal
Synthesis of propylene glycol methyl ether over amine modified porous silica by ultrasonic technique
Resumo:
Finding a Suitable plasticizer for polylactide (PLA) is necessary to overcome its brittleness and enlarge its range of applications. In this study, commercial PLA was melt-blended with a new plasticizer, an ethylene glycol/propylene glycol random copolymer [poly(ethylene glycol-co-propylene glycol) (PEPG)] with a typical number-average molecular weight of 1.2 kDa and an ethylene glycol content of 78.7 mol %. The thermal properties, crystallization behavior, and mechanical properties of the quenched blends and the properties of the blends after storage for 2 months under the ambient conditions were investigated in detail. The advantage of using PEPG is that it does not crystallize at room temperature and has good compatibility with PLA. The quenched PLA/PEPG blends were homogeneous and amorphous systems. With an increase in the PEPG content (5-20%), the glass-transition temperature, tensile strength, and modulus of the blends decreased, whereas the elongation at break and crystallizability increased dramatically. The cold crystallization of PLA resulted in phase separation of the PLA/PEPG blends by annealing of the blends at the crystallization temperature.
Resumo:
The cryoprotective effects of 11 different extenders, TTE, DM, mDM, LG-DM, G-DM, TCG, TEST, TSM, Test-M, Test-H, and LM, on sperm cryopreservation of cynomolgus monkey (Macaca fascicularis) have been compared with glycerol as cryoprotectant. Sperm motility, plasma membrane, and acrosomal integrity were examined to evaluate frozen-thawed sperm function. The results showed that TTE, DM, mDM, LG-DM, G-DM, and TCG exhibited the best and similar protective efficiencies for cynomolgus monkey sperm cryopreservation in terms of sperm motility and plasma membrane integrity (P > .05). The acrosomal integrity for spermatozoa cryopreserved in TCG was statistically lower than that of TTE, DM, mDM, LG-DM, and G-DM (P < .05) but was significantly higher than that of TEST, TSM, Test-M, Test-H, and LM (P < .05). The postthaw sperm motility for 5 other extenders (TEST, TSM, Test-M, Test-H, and LIVI) did not exceed 30%, and the 3 sperm parameters evaluated for them were significantly lower than that of TTE, DM, mDM, LG-DM, G-DM, and TCG (P < .05). On the basis of these findings, 5 commonly used permeating cryoprotectants, glycerol, ethylene glycol, dimethyl sulfoxide, acetamide and propylene glycol have further been tested for their effectiveness on sperm cryopreservation in extenders of TTE, DM, mDM, LG-DM, G-DM, and TCG. The results showed that the sperm cryoprotective efficiencies of glycerol and ethylene glycol were similar and best among 5 permeating cryoprotectant treatments (P > .05). Dimethyl sulfoxide or acetamide resulted in average cryoprotection for cynomolgus monkey spermatozoa: poorer than glycerol or ethylene glycol but better than that of propylene glycol (P < .05). In addition, the action of permeating cryoprotectant appeared to be independent of extenders. The results in the present study demonstrate that 1) TTE, DM, mDM, LG-DM, G-DM, and TCG are excellent extenders and suitable for cynomolgus monkey sperm cryopreservation; 2) the mechanism of action of permeating cryoprotectants are not affected by extender composition; 3) ethylene glycol has a similar cryoprotective efficacy to glycerol that makes it a successful cryoprotectant for sperm cryopreservation in cynomolgus monkeys.
Resumo:
The objectives were to investigate the effect of cryoprotectants on the hatching rate of red seabream embryos. Heart-beat embryos were immersed in: five permeable cryoprotectants, dimethyl sulfoxide (DMSO), glycerol (Gly), methanol (MeOH), 1,2-propylene glycol (PG), and ethylene glycol (EG). in concentrations of 5-30% for 10, 30, or 60 min; and two non-permeable cryoprotectants: polyvinylpyrrolidone (PVP), and sucrose (in concentrations of 5-20% for 10 or 30 min). The embryos were then washed and incubated in filtered seawater until hatching occurred. The hatching rate of the embryos treated with permeable cryoprotectants decreased (P < 0.05) with increased concentration and duration of exposure. In addition, PG was the least toxic permeable cryoprotectant, followed by DMSO and EG, whereas Gly and MeOH were the most toxic. At a concentration of 15% and 30 min exposure, the hatching rate of the embryos immersed in PG was 93.3 +/- 7.0% (mean +/- S.D.), however. in DMSO. EG, Gly. and MeOH, it was 82.7 +/- 10.4, 22.0 +/- 5.7, 0.0 +/- 0.0, and 0.0 +/- 0.0%, respectively. Hatching rate of embryos treated with PVP decreased (P < 0.05) with the increase of concentration and exposure time, whereas for embryos treated with sucrose, there was no significant decrease in comparison with the control at the concentrations used. (C) 2008 Elsevier Inc. All rights reserved.
Resumo:
Polylactide (PLA) was melt blended with a biodegradable hyperbranched poly(ester amide) (HBP) to enhance its flexibility and toughness without sacrificing comprehensive performance. The advantage of using HBP was due to its unique spherical shape, low melt viscosity, and abundant functional end groups together with its easy access. Rheological measurement showed that blending PLA with as little as 2.5% HBP resulted in a 40% reduction of melt viscosity. The glass transition temperature (T-g) of PLA in the blends decreased slightly with the increase of HBP content, indicating partial miscibility which resulted from intermolecular interactions via H-bonding. The H-bonding involving CO of PLA with OH and NH of HBP was evidenced by FTIR analysis for the first time. The HBP component, as a heterogeneous nucleating agent, accelerated the crystallization rate of PLA. Remarkably, with the increase of HBP content, the elongation at break of PLA blends dramatically increased without severe loss in tensile strength, even the tensile strength increased within 10% content of HBP. The stress-strain curves and the SEM photos of impact-fractured surface showed the material changed from brittle to ductile failure with the addition of HBP. Reasonable interfacial adhesion via H-bonding and finely dispersed particulate structure of HBP in PLA were proposed to be responsible for the improved mechanical properties.
Resumo:
Polyurethane (PU) based on polyepichlorohydrin/poly(methyl methacrylate) (PECH/PMMA) interpenetrating polymer networks (IPNs) was synthesized by a simultaneous method. The effects of composition, hydroxyl group number of PECH, NCO/OH ratio and crosslinking agent content in IPNs were investigated in detail. Some other glycols, such as poly(ethylene glycol), poly(propylene glycol) and hydroxyl-terminated polybutadiene, were also used to obtain PU/PMMA IPNs. The interpenetrating and fracture behaviors of the IPNs are explained briefly.