Effect of urea multinutritional molasses block supplementation on liveweight change of yak calves and productive and reproductive performances of yak cows

Using three different types of yaks, 30 head of 1-yr-old calves (liveweight 60.7 +/- 6.3 kg), 30 head of 2-yr-old calves (97.7 +/- 10.2 kg) and 30 head of yak cows (160.2 +/- 15.1 kg) were randomly selected from the same yak herds. Each type of yak herd was divided into control (C) and trial (T) groups using a completely randomized design, with 10 and 20 animals in the C and T groups, respectively. The animals in the C group were grazed on natural rangeland, and the animals in the T group were supplemented with urea multinutritional molasses blocks (UMMB), together with grazing on natural rangeland from January to May of 1998. The objective was to determine the effect of UMMB on productive performance of yak calves and yak cows in the cold season. Live weight loss of 1-yr-old calves, 2-yr-old calves and yak cows was reduced by 1.2, 8.3 and 7.9 kg after UMMB supplementation (P < 0.01). The 1-yr-old calves gained the most in the first month of supplementation, but the 2-yr-old calves and yak cows gained the most both in the first and last supplementation months. Daily milk yield of yak cows increased by 0.21 kg d(-1) when the lactating animals were supplemented with UMMB (P < 0.01), although there was no effect (P < 0.01) of UMMB supplementation on hair and downy hair production. Supplementation with UMMB also improved reproductive performance of yak cows, with 8.8 and 30.9% increments in pregnancy rate and newborn weight, respectively. We conclude that the benefit of UMMB supplementation the 1-yr-old calves was not economical, with only 0.3:1 output to input ratio, but supplementation of the 2-yr-old calves and yak cows may be economical, with 1.8:1 and 1.4:1 output to input ratios, respectively.

Analyses of the mechanical properties and microstructure of bamboo epoxy composites

Bamboo reinforced epoxy possesses reasonably good properties to waarrant its use as a structural material, and is fabricated by utilizing bamboo, an abundant material resource, in the technology of fibre composites. Literature on bamboo-plastics composites is rare. This work is an experimental study of unidirectional bamboo-epoxy laminates of varying laminae number, in which tensile, compressive, flexural and interlaminar shear properties are evaluated. Further, the disposition of bamboo fibre, the parenchymatous tissue, and the resin matrix under different loading conditions are examined. Our results show that the specific strength and specific modulus of bamboo-epoxy laminates are adequate, the former being 3 to 4 times that of mild steel. Its mechanical properties are generally comparable to those of ordinary glass-fibre composites. The fracture behaviour of bamboo-epoxy under different loading conditions were observed using both acoustic emission techniques and scanning electron microscopy. The fracture mode varied with load, the fracture mechanism being similar to glass and carbon reinforced composites. Microstructural analyses revealed that natural bamboo is eligibly a fibre composite in itself; its inclusion in a plastic matrix will help solve the problems of cracking due to desiccation and bioerosion caused by insect pests. Furthermore, the thickness and shape of the composite can be tailored during fabrication to meet specific requirements, thereby enabling a wide spectrum of applications.

The influence of buoyancy on the oscillatory thermocapillary convection with small bond number

This work is an experimental study of unidirectional bamboo-epoxy laminates of varying laminae number, in which tensile, compressive, flexural and interlaminar shear properties are evaluated. Further, the disposition of bamboo fibre, the parenchymatous tissue, and the resin matrix under different loading conditions are examined. Our results show that the specific strength and specific modulus of bamboo-epoxy laminates are adequate, the former being 3 to 4 times that of mild steel. Its mechanical properties are generally comparable to those of ordinary glass-fibre composites. The fracture behaviour of bamboo-epoxy under different loading conditions were observed using both acoustic emission techniques and scanning electron microscopy. The fracture mode varied with load, the fracture mechanism being similar to glass and carbon reinforced composites. Microstructural analyses revealed that natural bamboo is eligibly a fibre composite in itself; its inclusion in a plastic matrix will help solve the problems of cracking due to desiccation and bioerosion caused by insect pests. Furthermore, the thickness and shape of the composite can be tailored during fabrication to meet specific requirements, thereby enabling a wide spectrum of applications.

Turbulent collision of inertial particles: point-particle based, hybrid simulations and beyond

Point-particle based direct numerical simulation (PPDNS) has been a productive research tool for studying both single-particle and particle-pair statistics of inertial particles suspended in a turbulent carrier flow. Here we focus on its use in addressing particle-pair statistics relevant to the quantification of turbulent collision rate of inertial particles. PPDNS is particularly useful as the interaction of particles with small-scale (dissipative) turbulent motion of the carrier flow is mostly relevant. Furthermore, since the particle size may be much smaller than the Kolmogorov length of the background fluid turbulence, a large number of particles are needed to accumulate meaningful pair statistics. Starting from the relative simple Lagrangian tracking of so-called ghost particles, PPDNS has significantly advanced our theoretical understanding of the kinematic formulation of the turbulent geometric collision kernel by providing essential data on dynamic collision kernel, radial relative velocity, and radial distribution function. A recent extension of PPDNS is a hybrid direct numerical simulation (HDNS) approach in which the effect of local hydrodynamic interactions of particles is considered, allowing quantitative assessment of the enhancement of collision efficiency by fluid turbulence. Limitations and open issues in PPDNS and HDNS are discussed. Finally, on-going studies of turbulent collision of inertial particles using large-eddy simulations and particle- resolved simulations are briefly discussed.

A Dynamic Model For Ice-Induced Vibration Of Structures

A dynamic model for the ice-induced vibration (IIV) of structures is developed in the present study. Ice properties have been taken into account, such as the discrete failure, the dependence of the crushing strength on the ice velocity, and the randomness of ice failure. The most important prediction of the model is to capture the resonant frequency lock-in, which is analog to that in the vortex-induced vibration. Based on the model, the mechanism of resonant IIV is discussed. It is found that the dependence of the ice crushing strength on the ice velocity plays an important role in the resonant frequency lock-in of IIV. In addition, an intermittent stochastic resonant vibration is simulated from the model. These predictions are supported by the laboratory and field observations reported. The present model is more productive than the previous models of IIV.

黄土高原丘陵沟壑区小流域优化生态-生产范式

黄土丘陵沟壑区是黄土高原的主体部分，也是具有特殊景观格局的生态-经济敏感区，保护环境、发展生产始终是其面临的双重任务。小流域既是区域的优势景观单元。文章试以小流域为基础，研究黄土丘陵沟壑区的优化生态-生产范式。根据内容，论文可分为5个部分： 首先，论文系统总结了黄土高原的几个主要特点，如黄土地貌，土壤侵蚀等。本章节重点介绍了小流域治理的发展历程及其特点，以及小流域的治理现状。其次，综合阐述了黄土高原丘陵沟壑区的生态经济背景，指出：小流域为黄土丘陵沟壑区的优势景观单元，是区域治理与发展的基本单元;并提出区域治理与开发的生态与生产定位。第三，详细研究了区域小流域景观生态学特点;同时探讨了作为一个复合生态系统，小流域景观功能及其发展变化特点。结合第二部分，提出了黄土丘陵沟壑区小流域优化生态-生产范式的5项原则。第四，具体分析了安塞纸坊沟流域自然资源环境与社会经济基础，依据范式建立的原则，根据净第一性生产力等环境、社会经济等指标，建立流域的优化生态-经济空间结构。最后，在第四部分的基础上，提出区域小流域优化生态-生产范式的空间体系组成以及组成范式的关键措施和核心组分。

北京市郊区可持续景观生态规划及 优化生态生产范式研究——以昌平区为例

北京市郊区可持续景观生态规划及优化生态生产范式研究是指要遵循区域自然地理要素的分异规律，以土地利用现状格局为基础，以景观生态学原理和可持续发展准则为理论指导，以景观空间分析为具体研究内容来揭示区域土地利用类型结构、功能的异质性和有序性，以期提出优化的土地利用格局。本论文主要通过大量数据、图件的收集、野外考察与调查，文献查阅与数据处理、分析，得出以下主要结论： 一、理论方面 基于景观生态学理论——景观要素，空间结构与生态学过程，景观动态，异质性，等级结构，连接度以及景观的时空性等，以北京地区为例阐述了景观生态学理论如何合理地整合于生态建设与保育之中，并重点阐释了北京生态建设与保育“小三圈”格局的结构与功能，该系统包括山区外圈层、郊区平原中圈层和城区内圈层，其目标要实现：(1)山区发挥以水源涵养、水土保持防护为主的生态功能;(2)郊区创建农田、林地、草地异质性的人工稀树草原景观，形成带、网、片、点相结合的绿网系统;(3)城区以自身绿化和美化为主。同时，本研究针对我国的区域可持续发展进一步提出更加有效的建设性意见：(1)开展区域生态适宜性评价;(2)区域水平的土地利用格局、动态以及预测性研究;(3)进行区域可持续景观生态规划，建立区域优化生态生产范式，最终实现可持续发展目标。 二、研究方法方面 利用空间自相关指数，并结合“城-郊-乡”梯度分析法研究景观格局对尺度（包括粒度、幅度、方向）变化的响应。得出以下主要结论： 1、景观格局对于尺度变化有着不同的响应，随着空间粒度的增加，空间自相关均呈下降趋势;随着幅度的增加，空间自相关基本不变;人类干扰较多的景观几乎不受“划区效应”的影响;不同的数据类型，同一数据类型的不同景观对于尺度的变化均有着不同的响应。 2、沿“城-郊-乡”样带，空间自相关呈阶梯状增加趋势。景观空间自相关大小顺序：林牧景观>林果景观>农田景观>都市景观>都市化景观，人为干扰较多的景观具有较低的空间自相关，但对尺度的变化表现出较强的敏感性。 三、实例研究 北京市郊区可持续景观生态规划及优化生态生产范式研究是以昌平区为例，从昌平区经济与产业结构现状分析出发、以昌平区土壤理化性状分析为背景，以景观格局现状、动态，以及土地利用内部转移格局与过程、驱动因素分析为主要内容，并且重点探讨了昌平区城镇化的过程特征及空间特征，得出以下主要结论： 1、昌平区GDP配比方式，以及昌平区农村GDP结构模式均为“三二一”。昌平区在北京市农业中的地位，以及农业在昌平区GDP中所处地位均弱化。截止2001年，昌平区农业产值中，牧业>种植业>渔业>林业，牧业居于首位，占到46.70%，而传统种植业也正以小汤山为龙头向现代化、高科技、高效化的“六种农业”转化。总体讲，农业的粮食生产功能在昌平区已不再是一个重要功能，传统种植业正逐步地让位于畜牧业（人工牧草）、林业（疏林、苗圃），突出体现了具有良好生态学效益的牧草、林果在未来大农业发展中的战略地位。 2、昌平土壤肥力状况良好，景观分区与土壤理化性质是吻合的。基于土壤理化基质，昌平区应形成林、灌、草为主的山区景观，园林式城镇、林、果、灌相结合的山前倾斜平原景观，以及农、林、草配置的生态农业景观和花卉、种苗、绿化带相辉映的绿色生态住宅景观。 3、从1989~2001年期间，研究区内土地利用景观经历了很大的变化。土地利用景观的量变主要体现在城镇用地的迅速扩张和耕地的锐减，而土地利用类型的变化则体现在水田、传统菜地的逐渐消失，以及2001年后人工牧草的大面积推广种植。景观格局在不同景观分区的差异也得以论证，中北部山麓平原卫星城镇、旅游林果区（III）具有最高的多样性和最低的优势度、聚集度，中南部平原高科技、都市生态农业区（II）的多样性最低，而优势度、聚集度最高，对于南部平原都市边缘、城镇住宅区（I）各指标则介于III和II区之间。 4、从1989~2001年期间，土地利用的内部转移主要体现在耕地向城镇用地的大面积转移，其次，传统菜地转向城镇用地和其他种植耕地，而人工牧草是由部分耕地转移而来的。城镇化、水资源短缺和农业政策是主要驱动因素。土地利用的内部转移具有明显的区域差异，中北部山麓平原卫星城、旅游林果区体现出卫星城镇的发展，南部平原都市边缘住宅区则反映出北京都市边缘的向外扩张，而中南部平原高科技都市农业区则正向现代化的、高科技都市农业示范区发展。 5、昌平区三种主要的城镇化模式，即都市边缘带状城镇扩展模式、交通主轴线状城镇扩展模式和卫星城面状城镇扩展模式。研究表明，昌平区的城镇化主要集中在1989~1996年期间。 基于昌平区的产业与经济结构现状，土壤养分状况，景观结构现状、动态，土地利用转移方向，并且结合昌平区自然地理分异规律，社会经济因素对昌平区进行了可持续景观规划，昌平区应遵循的四个景观分区为：北部中低山生态保护、生态旅游区;中北部山麓平原卫星城镇、旅游林果区;中南部平原高科技、都市生态农业区;南部平原都市边缘、城镇住宅区。 最后作为总结、归纳，我们提出昌平区优化生态生产范式，昌平区的发展应定位于（1）生态环境保护与水源涵养的生态功能;（2）教育、示范、创新功能;（3）生活功能，并且遵循自然地域分异规律原则、因地制宜原则、生态主导性原则、统筹兼顾原则，大力发展昌平区经济的优势产业，即畜牧业、林果业和旅游业，突出肉羊、苹果、牧草和林木种苗等四个具有昌平特色的主导产业。 景观生态学;景观空间格局;可持续景观生态规划;土地利用变化;优化生态生产范式;北京昌平区

松嫩平原农牧交错区优化生态-生产范式——以长岭县为例

松嫩平原农牧交错区位于松嫩平原的西部，中国北方农牧交错带的最东端;具有独特的地质环境特点，环境问题突出，是我国生态脆弱地区之一，及世界三大苏打盐碱土集中分布区之一。近年来，由于人为的不合理利用和开垦、以及粗放的生产模式，使该地区生态系统严重受损，土地沙漠化、水土流失、盐碱化、土地生产力下降等生态环境问题日益突出。因此，建立一个适合该地区生态环境条件、社会经济发展状况的优化生态-生产范式是必要而紧迫的。 本论文以松嫩平原农牧交错区为研究对象，以其典型地段为切入点，通过大量数据的收集、文献资料的查阅、野外考察与测定、室内分析处理等，得出了以下主要结论： 一、生态-地理环境背景分析 松嫩平原农牧交错区是多种生态-地理环境危害并存的区域，其中包括盐碱化、沙漠化、气候灾害、水资源短缺等等。当前，沙化土地和盐碱化土地的面积已占该地区土地总面积的34.27 %，并且呈逐年递增的趋势。松嫩平原农牧交错区气候灾害频发，主要是旱灾、水灾、风灾。此外，水资源短缺以及水质问题，同样影响着农业生产及社会经济发展。造成松嫩平原农牧交错区多种生态-地质环境危害并存的主要影响机制是：该地区自身的地质-地理环境特点、气候因素和人类活动的综合效应，并且人类活动日益成为主要驱动因子。 二、实例研究 松嫩平原农牧交错区优化生态-生产范式研究是以长岭县为例，通过对长岭县景观格局变化分析、土壤格局分布、农牧业生产特点、以及农业可持续性评价等，得出以下结论： 1、对研究区内土地利用格局分析表明：1980 ~ 2000年，在土地利用类型没有发生变化的基础上，表现为各土地利用类型面积上的增减;草地、林地大面积地向农田转移，农田面积明显增加;大规模地开垦农田，已经导致了景观的优势度增加，破碎度增加，多样性下降，这最终将使整个景观趋于更加不稳定。 2、长岭县土壤总体水平较差，障碍性土壤占长岭县总土地面积的55.38 %。从土地利用变化对不同地势条件下土壤理化性状影响分析，结果表明：（1）地势相对高的平台地，土壤肥力较高，且开垦对土壤理化性质的影响相对较小，更适合农业开发;（2）低地原生植被为草甸草原，其养分状况也比较好，但其地势较低，易发生水渍和盐碱化;（3）坡地是当地土壤养分最为贫瘠地区，也是风沙土较集中分布的区域，对其开垦会增大土壤的风蚀和水蚀，使土壤养分状况严重下降。 3、对研究区牧草资源分布格局、牧草资源承载力和利用现状等进行分析，结果表明：放牧系统提供的牧草资源已不能满足当地畜牧业对牧草资源的需求。草地提供的牧草资源仅能满足总牧草需求的16.6 %，放牧系统提供的牧草仅占总牧草需求的47.3 %;玉米秸秆转化为牧草资源的潜力巨大，经估算，占总牧草资源的78.3 %，其承载力为总牧草需求的2.4倍。当前，农牧交错区牧草资源的粗蛋白含量普遍偏低，不能完全满足动物生产的需要，制约了当地畜牧业发展。根据当地畜牧业现状、牧草资源潜力，我们提出：应在合理利用当地牧草资源的基础上，有计划地建立高产优质、富含粗蛋白的人工牧草基地，实现畜牧业可持续发展与生态保护的协调统一。 4、长岭县是以第一产业为主，即农业生产为主要经济来源。对农业生产结构的分析表明：农牧业生产占总农业产值的90 %以上，并以种植业为主，种植业一直占总农业产值60 %以上。受当地气候条件、土壤格局分布的限制，单一粮食生产、粗放的生产模式以及对天然草地资源的过分依赖，最终导致该地区农牧业发展缓慢，经济条件落后。 5、在上述分析的基础上，作者提出了长岭县优化生态-生产范式，即以高效农业生产、生活圈，水土保持和自然生态保育圈、牧草生产基地及生态功能保护圈的三圈等级系统。以此为依据，对土地利用格局进行调整，通过粮、草、经多元农业结构的建设，在合理利用与保护草地的基础上，使长岭县畜牧业走向产业化的发展模式。

Bibliometric analysis of biological invasions research during the period of 1991 to 2007

The objective of this study is to conduct a bibliometric analysis of all biological invasions-related publications in the Science Citation Index (SCI) from 1991 to 2007. The indicator citation per publication (CPP) was used to evaluate the impact of articles, journals, and institutions. In the 3323 articles published in 521 journals, 7261 authors from 1905 institutions of 100 countries participated. As the most productive country of biological invasions research, the US will benefit from more collaboration between institutions, countries, and continents. In addition, analysis of keywords was applied to reveal research trends.

A Review of Nontraditional Biomanipulation

The aim of this review is to identify problems, find general patterns, and extract recommendations for successful management using nontraditional biomanipulation to improve water quality. There are many obstacles that prevent traditional biomanipulation from achieving expectations: expending largely to remove planktivorous fish, reduction of external and internal phosphorus, and macrophyte re-establishment. Grazing pressure from large zooplankton is decoupled in hypereutrophic waters where cyanobacterial blooms flourish. The original idea of biomanipulation (increased zooplankton grazing rate as a tool for controlling nuisance algae) is not the only means of controlling nuisance algae via biotic manipulations. Stocking phytoplanktivorous fish may be considered to be a nontraditional method; however, it can be an effective management tool to control nuisance algal blooms in tropical lakes that are highly productive and unmanageable to reduce nutrient concentrations to low levels. Although small enclosures increase spatial overlap between predators and prey, leading to overestimates of the impact of predation, microcosm and whole-lake experiments have revealed similar community responses to major factors that regulate lake communities, such as nutrients and planktivorous fish. Both enclosure experiments and large-scale observations revealed that the initial phytoplankton community composition greatly impacted the success of biomanipulation. Long-term observations in Lake Donghu and Lake Qiandaohu have documented that silver carp (Hypophthalmichthys molitrix) and bighead carp (H. nobilis) (two filter-feeding planktivorous species commonly used in management) can suppress Microcystis blooms efficiently. The introduction of silver and bighead carp could be an effective management technique in eutrophic systems that lack macrozooplankton. We confirmed that nontraditional biomanipulation is only appropriate if the primary aim is to reduce nuisance blooms of large algal species, which cannot be controlled effectively by large herbivorous zooplankton. Alternatively, this type of biomanipulation did not work efficiently in less eutrophic systems where nanophytoplankton dominated.

Dietary methionine requirement for juvenile rockfish, Sebastes schlegeli

A 65-day growth trial was conducted at 19.5 degrees C to determine the optimal dietary methionine for juvenile rockfish, Sebastes schlegeli. Semipurified diets were formulated to be isonitrogenous and isoenergetic. Fish meal was used as intact protein source and crystal amino acid was used as a part of dietary protein. Six experimental diets were formulated to contain 5.8, 10.8, 15.8, 20.8, 25.8 and 30.8 g kg(-1) dietary methionine. The results showed that dietary methionine significantly affected specific growth rate, weight gain, food conversion ratio, protein productive value (PPV), energy retention efficiency, carcass index and body composition. No significant difference was found in hepatosomatic index. The dietary methionine requirement for maximum growth was 13.7 g kg(-1) dry matter or 28.0 g kg(-1) of dietary protein when cystine content was 1.2 g kg(-1) dry matter.

Effects of the phytoplanktivorous silver carp (Hypophthalmichthys molitrixon) on plankton and the hepatotoxic microcystins in an enclosure experiment in a eutrophic lake, Lake Shichahal in Beijing

The responses of nutrients, water transparency, zooplankton, phytoplankton and microcystins to a gradient of silver carp biomass (0, 18, 55, 110 g/m(3)) were assessed using enclosures in Lake Shichahai (Beijing). Picophytoplankton biomass increased with increasing fish stocking density (r=0.64, p=0.09). Silver carp significantly depressed zooplankton biomass, and thus, zooplankton grazing was too low to control phytoplankton. Intracellular microcystin (MC) content in the enclosures was correlated only to Microcystis biomass in the present study. Microcystis spp. biomass and intracellular microcystins content were much higher in lake water than those of enclosures with and without stocking fish. Stocking of silver carp could be an appropriate in highly productive Lake Shichahai, which naturally lacks of large cladoceran zooplankton. A fish stocking density of 55 g/m(3) was most efficient at controlling Microcystis blooms and increasing water clarity. Mean extracellular MC concentration in the lake water was almost the same with that of the enclosures with fish. (c) 2006 Elsevier B.V. All rights reserved.

Heavy metals in plants and phytoremediation - A state-of-the-art report with special reference to literature published in Chinese journals

Goal, Scope and Background. In some cases, soil, water and food are heavily polluted by heavy metals in China. To use plants to remediate heavy metal pollution would be an effective technique in pollution control. The accumulation of heavy metals in plants and the role of plants in removing pollutants should be understood in order to implement phytoremediation, which makes use of plants to extract, transfer and stabilize heavy metals from soil and water. Methods. The information has been compiled from Chinese publications stemming mostly from the last decade, to show the research results on heavy metals in plants and the role of plants in controlling heavy metal pollution, and to provide a general outlook of phytoremediation in China. Related references from scientific journals and university journals are searched and summarized in sections concerning the accumulation of heavy metals in plants, plants for heavy metal purification and phytoremediation techniques. Results and Discussion. Plants can take up heavy metals by their roots, or even via their stems and leaves, and accumulate them in their organs. Plants take up elements selectively. Accumulation and distribution of heavy metals in the plant depends on the plant species, element species, chemical and bioavailiability, redox, pH, cation exchange capacity, dissolved oxygen, temperature and secretion of roots. Plants are employed in the decontamination of heavy metals from polluted water and have demonstrated high performances in treating mineral tailing water and industrial effluents. The purification capacity of heavy metals by plants are affected by several factors, such as the concentration of the heavy metals, species of elements, plant species, exposure duration, temperature and pH. Conclusions. Phytoremediation, which makes use of vegetation to remove, detoxify, or stabilize persistent pollutants, is a green and environmentally-friendly tool for cleaning polluted soil and water. The advantage of high biomass productive and easy disposal makes plants most useful to remediate heavy metals on site. Recommendations and Outlook. Based on knowledge of the heavy metal accumulation in plants, it is possible to select those species of crops and pasturage herbs, which accumulate fewer heavy metals, for food cultivation and fodder for animals; and to select those hyperaccumulation species for extracting heavy metals from soil and water. Studies on the mechanisms and application of hyperaccumulation are necessary in China for developing phytoremediation.

STUDIES ON MIXED MASS CULTIVATION OF ANABAENA SPP (NITROGEN-FIXING BLUE-GREEN-ALGAE, CYANOBACTERIA) ON A LARGE-SCALE

Studies on mixed mass cultivation of Anabaena spp. on a large scale (5170 m2) were conducted continuously for 3 years. Under the continental monsoon climate in northern subtropics (30-degrees-N, 115-degrees-E), 7-11 g dry weight m-2 day-1 of microalgal biomass on average was harvested in simple plastic greenhouses in the effective growth days during the warmer seasons. The maximum productivity was 22 g m-2 day-1 in the middle of summer. Observations on the productive properties of strains of Anabaena spp. indicated that they were different from and could compensate for each other in their productivities and adaptations to the seasonal changes. With different lining materials (PVC sheets, concrete, sand and soil) in the culture ponds, no significant variation of productivity was found, but bubbling with biogas in the middle of the day and the application of some growth regulating substances (2,4-D, NaHSO3 and extracts of oyster mushroom spawn) was able to improve the production. The cost of microalgal biomass in this way was around 0.75-1.0 US dollar(s) per kilogram.