Surface planar ion chip for linear radio-frequency Paul traps

We propose a surface planar ion chip which forms a linear radio frequency Paul ion trap. The electrodes reside in the two planes of a chip, and the trap axis is located above the chip surface. Its electric field and potential distribution are similar to the standard linear radio frequency Paul ion trap. This ion trap geometry may be greatly meaningful for quantum information processing.

植生克雷伯氏菌（Klebsiella planticola 19-1）nifA-like基因的克隆

植生克雷伯氏菌(Klebsiella planticola 19-1)是从新疆鄯善地区玉米根际分离得到的一株联合固氮菌。在40℃高温下有较强的乙炔还原活性。 本工作利用Southern Blot分子杂交技术, 以Klebsiella pneumoniae的nifA为探针，证明了在K．planticola 19-1中存在nifA-like基因，由nifH-lacZ实验推论其nifA-like基因产物对高温相对稳定。经过大质粒电泳和Southern Blot分子杂交，发现nifA-like基因定位于染色体外的大质粒上。本工作进一步克隆了含有K．plonticola 19-1的nifA-like基因的DNA片段，做了它的限制性酶切图谱，并将nifA-like基因初步定位。

The Homology and Relationship of Human (Homo sapiens) Chromosomes 1, 19 and Dusky Langur (Trachypithacus obscurus) Chromosomes 6, 8 Demonstrated with Chromosome Painting

http://www.jstage.jst.go.jp/

Species diversity of the subgenus Amiota (s. str.) Loew, 1862 (Diptera, Drosophilidae) in southern China

A total of 38 Amiota (s. str.) species (about 40% of the world total) are reported from southern China, with descriptions of 23 new species, i.e. sinuata species-group: aculeata Chen and Aotsuka, sp. nov., subsinuata Chen and Aotsuka, sp. nov., xishuangbanna Chen and Aotsuka, sp. nov.; basdeni species-group: brevipartita Chen and Gao, sp. nov., curvispina Chen and Gao, sp. nov., lipingae Chen and Gao, sp. nov., huae Chen and Gao, sp. nov., longispina Chen and Gao, sp. nov.; taurusata species-group: asymmetrica Chen and Takamori, sp. nov.; femorata Chen and Takamori, sp. nov., yixiangensis Chen and Takamori, sp. nov.; alboguttata species-group: ailaoshanensis Chen and Watabe, sp. nov., arcuata Chen and Watabe, sp. nov., dehiscentia Chen and Watabe, sp. nov., jizushanensis Chen and Watabe, sp. nov., latitabula Chen and Watabe, sp. nov., luguhuensis Chen and Watabe, sp. nov., nozawai Chen and Watabe, sp. nov., paraspinata Chen and Watabe, sp. nov., shangrila Chen and Watabe, sp. nov.; and ungrouped: fuscicata Chen and Zhang, sp. nov., wangi Chen and Zhang, sp. nov., wuyishanensis Chen and Zhang, sp. nov. A key to all species from southern China is provided. The Amiota fauna of southern China at the species-group level is compared with that of six geographic regions. The subgenus Amiota is assumed to have originated and produced many species-groups in the Oriental region of East Asia, and then the basdeni, alboguttata and rufescens species-groups might have spread to Europe and North-Central America throughout the Palearctic region of East Asia and both the apodemata, sinuata and nagatai species-groups to tropical regions of South-East Asia.

Polymorphisms in the C-type lectin genes cluster in chromosome 19 and predisposition to severe acute respiratory syndrome coronavirus (SARS-CoV) infection

Background: Polymorphisms of CLEC4M have been associated with predisposition for infection by the severe acute respiratory syndrome coronavirus (SARS-CoV). DC-SIGNR, a C-type lectin encoded by CLEC4M, is a receptor for the virus. A variable number tandem

瘦尾细额溞Oxyurella tenuicaudis(Sars,1862)的若干生物学特征

瘦尾细额溞是一种出现数量极其稀少的枝角类。关于它的生物学特征尚未见诸文献。本文测量了一次采自云南永胜一池塘的本种300个两性个体的体长和怀卵量,就其幼体与成体的数量、体长与怀卵量、雄性以及性比等问题探讨了种群的生物学状况。 详细观察比较了这个种的重要分类特征——雌体后腹部,并描述了变异范围。对卵鞍和雄体也作了描述。

Fracture Properties of LPCVD Silicon Nitride and Thermally Grown Silicon Oxide Thin Films From the Load-Deflection of Long Si3N4 and SiO2/Si3N4 Diaphragms

The bulge test is successfully extended to the determination of the fracture properties of silicon nitride and oxide thin films. This is achieved by using long diaphragms made of silicon nitride single layers and oxide/nitride bilayers, and applying comprehensive mechanical model that describes the mechanical response of the diaphragms under uniform differential pressure. The model is valid for thin films with arbitrary z-dependent plane-strain modulus and prestress, where z denotes the coordinate perpendicular to the diaphragm. It takes into account the bending rigidity and stretching stiffness of the layered materials and the compliance of the supporting edges. This enables the accurate computation of the load-deflection response and stress distribution throughout the composite diaphragm as a function of the load, in particular at the critical pressure leading to the fracture of the diaphragms. The method is applied to diaphragms made of single layers of 300-nm-thick silicon nitride deposited by low-pressure chemical vapor deposition and composite diaphragms of silicon nitride grown on top of thermal silicon oxide films produced by wet thermal oxidation at 950 degrees C and 1050 degrees C with target thicknesses of 500, 750, and 1000 mn. All films characterized have an amorphous structure. Plane-strain moduli E-ps and prestress levels sigma(0) of 304.8 +/- 12.2 GPa and 1132.3 +/- 34.4 MPa, respectively, are extracted for Si3N4, whereas E-ps = 49.1 +/- 7.4 GPa and sigma(0) = -258.6 +/- 23.1 MPa are obtained for SiO2 films. The fracture data are analyzed using the standardized form of the Weibull distribution. The Si3N4 films present relatively high values of maximum stress at fracture and Weibull moduli, i.e., sigma(max) = 7.89 +/- 0.23 GPa and m = 50.0 +/- 3.6, respectively, when compared to the thermal oxides (sigma(max) = 0.89 +/- 0.07 GPa and m = 12.1 +/- 0.5 for 507-nm-thick 950 degrees C layers). A marginal decrease of sigma(max) with thickness is observed for SiO2, with no significant differences between the films grown at 950 degrees C and 1050 degrees C. Weibull moduli of oxide thin films are found to lie between 4.5 +/- 1.2 and 19.8 +/- 4.2, depending on the oxidation temperature and film thickness.

Bulge testing and fracture properties of plasma-enhanced chemical vapor deposited silicon nitride thin films

The mechanical properties and fracture behavior of silicon nitride (SiNx) thin film fabricated by plasma-enhanced chemical vapor deposition is reported. Plane-strain moduli, prestresses, and fracture strengths of silicon nitride thin film; deposited both oil a bare Si substrate and oil a thermally oxidized Si substrate were extracted using bulge testing combined with a refined load-deflection model of long rectangular membranes. The plane-strain modu i and prestresses of SiNx thin films have little dependence on the substrates, that is, for the bare Si substrate, they are 133 +/- 19 GPa and 178 +/- 22 MPa, respectively, while for the thermally oxidized substrate, they are 140 +/- 26 Gila and 194 +/- 34 MPa, respectively. However, the fracture strength values of SiNx films grown on the two substrates are quite different, i.e., 1.53 +/- 0.33 Gila and 3.08 +/- 0.79 GPa for the bare Si substrate a A the oxidized Si substrate, respectively. The reference stresses were computed by integrating the local stress of the membrane at the fracture over the edge, Surface, and volume of the specimens and fitted with the Weibull distribution function. For SiNx thin film produced oil the bare Si Substrate, the Volume integration gave a significantly better agreement between data and model, implying that the volume flaws re the dominant fracture origin. For SiNx thin film grown on the oxidized Si substrate, the fit quality of surface and edge integration was significantly better than the Volume integration, and the dominant surface and edge flaws could be caused by buffered HF attacking the SiNx layer during SiO2 removal. Crown Copyright (C) 2008 Published by Elsevier B.V. All rights reserved.

A narrow photoluminescence linewidth of 19.2 meV at 1.35 mu m from In0.5Ga0.5As/GaAs quantum island structure grown by molecular beam epitaxy

A self-organized In0.5Ga0.5As/GaAs quantum island structure emitting at 1.35 mum at room temperature has been successfully fabricated by molecular beam epitaxy via cycled (InAs)(1)/GaAs)(1)monolayer deposition method. The photoluminescence measurement shows that a very narrow linewidth of 19.2 meV at 300 K has been reached for the first time, indicating effective suppression of inhomogeneous broadening of optical emission from the In0.5Ga0.5As island structure due to indium segregation reduction by introducing an AlAs layer and the strain reduction by inserting an In0.2Ga0.8As layer overgrown on the top of islands. The mound-like morphology of the islands elongated along the [1 (1) over bar0] azimuth are observed by the atomic force microscopy measurement, which reveals the fact that strain in the islands is partially relaxed along the [1 (1) over bar0] direction. Our results present important information for the fabrication of 1.3 mum wavelength quantum dot devices.