High sensitivity beam phase measurement system for isochronous cyclotron

The beam phase measurement system in the HIRFL is introduced. Based on the double-balanced mixer principle using rf-signal mixing and filtering techniques, a stable and sensitive phase measurement system has been developed. The phase history of the ion beam is detected by using a set of capacitive pick-up probes installed in the cyclotron. The phase information of the measurement is necessary for tuning to obtain a optimized isochronous magnetic field which induces to maximize the beam intensity and to optimize the beam quality. The result of the phase measurement is reliable and the accurancy reaches +/- 0.5 degrees.

尺度缩小合成孔径激光成像雷达的孔径合成实验

设计了一种尺度缩小的合成孔径激光成像雷达(SAIL),在实验室平台上模拟实施远场传输条件,相应地解决了波前测量和外差质量监视技术,实现了一个目标点的方位向孔径合成实验,实验结果与理论预测相近。

合成孔径激光成像雷达(Ⅰ):离焦和相位偏置望远镜接收天线

把合成孔径激光成像雷达的目标衍射区分为三个区域,提出采用离焦或者附加空间相位调制板的光学接收望远镜补偿回波像差。当目标处于菲涅耳衍射区时可采用离焦或偏置望远镜补偿回波二次项离焦像差并产生用于孔径合成的二次项相位历程;目标处于夫琅和费衍射区时可以采用离焦或偏置望远镜补偿回波二次项离焦像差但不产生相位历程;目标处于瑞利-索末菲衍射区域时不可能补偿回波高阶像差。

合成孔径激光成像雷达(Ⅱ):空间相位偏置发射望远镜

报道一种可以进行空间相位偏置的光学望远镜,用作合成孔径激光成像雷达中的光学发射天线。在望远镜内放置相位调制平板,控制望远镜的离焦量和位相调制平板的相位函数,能够在激光望远镜的照明区产生可控制的附加空间相位二次项,灵活改变激光照明波前,以在目标回波接收信号中产生雷达运动方向上的所需的二次项相位历程,因此能够实现特定的方位向成像分辨率。

合成孔径激光成像雷达(Ⅲ):双向环路发射接收望远镜

提出了一种用于合成孔径激光成像雷达的双向环路结构的发射接收望远镜,双向环路包括发射4-f转像系统、接收4-f转像系统和独立的望远镜。发射通道中设置离焦和相位调制平板偏置,接收通道中设置离焦和相位平板偏置。控制发射离焦量,发射相位调制函数,接收离焦量,接收相位调制函数,用同一个望远镜可以同时实现空间二次项相位附加偏置的激光发射和消除目标点散射回波接收波面像差的离焦光学接收,并产生雷达运动方向上合适的和可控制的相位二次项历程,从而实现孔径合成成像。详细介绍了系统设计,给出了从发射到光电外差接收的全过程传输方程。

高分辨力雷达地面运动目标信号特征分析

文章提出了一种基于相位历程响应的高分辨力雷达地面运动目标的信号特征分析方法。在分析总结了高分辨力雷达地面运动目标特征的基础上,对仿真的雷达数据作了深入的理论分析,包括对数据模型以及相位和幅度的分析。首先,特征数据中的相位信息同样值得提取和研究;而且,雷达视角上顺序特征数据的相位信息可以反映散射点之间的相对位置。这些结论在雷达目标识别中具有重要的指导意义。

Characterization of the life history of Bangia fuscopurpurea (Bangiaceae, Rhodophyta) in connection with its cultivation in China

Bangia fuscopurpurea (Rhodophyta) was cultivated in Putian (Fujian province, China). The characteristics of the life history concerned with cultivation were investigated and the cultivation procedure was presented. The gametophytic phase (thallus) and the sporophytic phase (conchocelis) occurred alternately in the life history of B. fuscopurpurea. Young thalli produced archeospores, and the number depended on the environmental factors. Temperature affected the number of archeospore release and percent of germination, and photo flux density (PFD) mainly affected the time of spore release and germination. Thalli matured from December to February and developed into the conchocelis phase through sexual reproduction. The conchocelis grown in shells had three developmental stages: vegetative conchocelis, conchosporangiall formation and conchospore formation. Pit-connections were present in the first 2 stages but absent after conchospore formation. Vegetative conchocelis and conchosporangial. branches can transform into each other. However, conchospores only developed into the gametophytic phase. Cultivation of B. fuscopurpurea was based on characterization of the life history, consisting of 3 steps: zygotospores collection, indoor cultivation of conchocelis and outdoor cultivation of thalli. Young thalli that developed from conchospores produced numerous archeospores before December. Over 90% of the crop was from the development of archeospores. The results indicated that conchosporelings were a good source of archeospores, and the development of the large quantity of archeospores acted as a more prevailing means to increase the population size. (C) 2008 Elsevier B.V. All rights reserved.