沙蜥属部分物种分类性状评价

沙蜥属Phrynocephalus Kaup，1825隶属于爬行纲（Reptilia）有鳞目（Squamata）蜥蜴亚目（Lacertilia）鬣蜥科（Agamidae），是欧亚大陆荒漠和稀疏草原常见蜥蜴。沙蜥属的分类及系统演化关系、地理分布格局与新生代第三纪以来古地中海的变迁、青藏高原的抬升及亚洲内陆干旱荒漠化的过程有密切的关系，长期以来有关沙蜥属的研究一直受到中外学者们的关注。由于沙蜥属地理分布广、形态变异大、体色和斑纹变化复杂，虽然前人使用过许多形态性状来描述和分类沙蜥属物种，但是仍然存在许多问题。性状的分类学意义不明确是造成这些问题的主要原因之一，因此本研究针对沙蜥属常用的鉴别性状进行分类意义的分析，希望能对沙蜥属物种鉴定及分类学其它研究有所裨益。 中国沙蜥属物种主要分布于西北的干旱荒漠区域及青藏高原的大部分地区，大约为18种。 本文研究了中国境内12种沙蜥：青海沙蜥（Phrynocephalus vlangalii）、西藏沙蜥（P. theobaldi）、南疆沙蜥（P. forsythii）、变色沙蜥（P. versicolor）、旱地沙蜥（P. helioscopus）、荒漠沙蜥（P. przewalskii）、乌拉尔沙蜥（P. guttatus）、草原沙蜥（P. frontalis）、叶城沙蜥（P. axillaris）、白稍沙蜥（P. koslowi）、无斑沙蜥（P. immaculatus）和白条沙蜥（P. albolineatus），对它们的65项外部形态性状进行了观察和测量，其中数量性状29项、质量性状36项。评价了这些性状的序级性、间断性和代表性，结论如下： 1. 对于数量性状，得出了适合各级分类的数值区间； 2. 给出了在不同序级上适合分类的质量性状。 并利用各性状评价的结果，给出12种沙蜥的检索表，以及对中国沙蜥物种某些尚存在争议的问题进行了探讨。 详细记录了青海沙蜥红原亚种的骨骼系统，首次发现并命名了肘骨（elbow bone）和垫骨（stepping bone），为沙蜥属系统学研究补充了骨骼方面的证据；解剖了乌拉尔沙蜥、旱地沙蜥、荒漠沙蜥的雌体和雄体的骨骼系统，并在14项骨骼形态性状上对这3种沙蜥进行了比较。 Phrynocephalus （Squamata，Agamidae） is a familiar genus of lizards inhabited desert and sparse steppes in Eurasia. The taxonomics, phylogenetics and distribution pattern of Phrynocephalus are relative intensely to these events: the vicissitudes of the archaic Mediterranean sea since the Cainozoic, the uplift of Qingzang Plateau and the expending arid areas in the inland of Asia. Owing to the wide distribution, the large variability of the morphology and the different colors in Phrynocephalus, it is difficult to identify them. Tough many morphological characters are used to describe and discriminate them，a lot of questions still exist. One of the most important reasons is the confusion in the morphological characters. In this study, we demonstrate the validity and the invalidity of the familiar characters. There are about 18 species of the genus Phrynocephalus in China, which exist in arid desert in Northwest China and Qingzang Plateau. Twelve Chinese species was analyzed in this paper. They are P. vlangalii，P. theobaldi，P. forsythia，P. versicolor，P. helioscopus，P. przewalskii，P. guttatus，P. frontalis，P. axillaris，P. koslowi，P. immaculatus，P. albolineatus. We measure 29 quantitative characters and observe 36 qualitative characters in each individual. Through analyzing these characters, we made some conclusions as follows: 1. to every quantitative character, we get a clear numeric area to discriminate the different operational taxonomic units. 2. we chose the valid qualitative characters in these operational taxonomic units. This paper is the first to describe the “elbow bone”, which is a bone in pectoral appendage equivalent to patella，and “stepping bone”, which is a bone under carpal. A detailed description of the skeletal system of female Phrynocephalus vlangalii hongyuanensis was conducted. We also anatomise the skeletal systems of three species: P. guttatus，P. przewalskii，P. helioscopus, and compare or contrast 14 skeletal characters in them. What’s more，this paper offers some suggestions to the questions of Chinese Phrynocephalus species and keys to 12 species of Phrynocephalus basing on our conclusions on the evaluation of the morphological characters.

Influence of Laser Wavelength on Laser-induced Breakdown Spectroscopy Applied to Semi-Quantitative Analysis of Trace-Elements in a Plant Sample

Laser-induced breakdown spectroscopy (LIBS) as a powerful analytical technique is applied to analyze trace-elements in fresh plant samples. We investigate the LIBS spectra of fresh holly leaves and observe more than 430 lines emitted from 25 elements and molecules in the region 230-438 nm. The influence of laser wavelength on LIBS applied to semi-quantitative analysis of trace-element contents in plant samples is studied. The results show that the UV laser has lower relative standard deviations and better repeatability for semi-quantitative analysis of trace-element contents in plant samples. This work may be helpful for improving the quantitative analysis power of LIBS applied to plant samples.

Experimental Study of Surface Deformation and Flow Pattern on Buoyant-Thermocapillary Convection

Free surface deformation is one of the most important physical phenomena in fluids with free surface. In the present paper, convection and surface deformation caused by thermocapillary effect in a rectangular cavity were investigated. In ground experiments, the convection was also affected by gravity. The cavity has a horizontal cross section of 52mm×42mm and the thikkness of the liquid layer is 4mm. Temperature difference between two sides of the liquid layer was increased gradually, and the flow in liquid layer will develop from steady to unstable convection. An optical diagnostic system consisting of a revised Michelson interferometer with image processor was developed to study fluid surface deformation in convection, and the displacements of free surface oscillation were determined. PIV technique was adopted to observe the evolution of flow pattern, and the velocity fields were obtained quantitatively. The present experiments demonstrate that surface deformation is quite distinct in buoyant-thermocapillary convection. in order to understand the mechanism of buoyant-thermocapillary convection, not only the hydrothermal wave instability but also the surface wave instability should be discussed.

Damage of a high-energy solid propellant and its effects on combustion

In order to improve the safety of high-energy solid propellants, a study is carried out for the effects of damage on the combustion of the NEPE (Nitrate Ester Plasticized Polyether) propellant. The study includes: (1) to introduce damage into the propellants by means of a large-scale drop-weight apparatus; (2) to observe microstructural variations of the propellant with a scanning electron microscope (SEM) and then to characterize the damage with density measurements; (3) to investigate thermal decomposition; (4) to carry out closed-bomb tests. The NEPE propellant can be considered as a viscoelastic material. The matrices of damaged samples axe severely degraded, but the particles are not. The results of the thermal decomposition and closed-bomb tests show that the microstructural damage in the propellant affects its decomposition and burn rate.

Measurement Of Fracture Toughness And Interfacial Shear Strength Of Hard And Brittle Cr Coating On Ductile Steel Substrate

The fracture toughness and interfacial adhesion properties of a coating on its substrate are considered to be crucial intrinsic parameters determining performance and reliability of coating-substrate system. In this work, the fracture toughness and interfacial shear strength of a hard and brittle Cr coating on a normal medium carbon steel substrate were investigated by means of a tensile test. The normal medium carbon steel substrate electroplated with a hard and brittle Cr coating was quasi-statically stretched to induce an array of parallel cracks in the coating. An optical microscope was used to observe the cracking of the coating and the interfacial decohesion between the coating and the substrate during the loading. It was found that the cracking of the coating initiated at critical strain, and then the number of the cracks of the coating per unit axial distance increased with the increase in the tensile strain. At another critical strain, the number of the cracks of the coating became saturated, i.e. the number of cracks per unit axial distance became a constant after this critical strain. Based on the experiment result, the fracture toughness of the brittle coating can be determined using a mechanical model. Interestingly, even when the whole specimen fractured completely under an extreme strain of the substrate, the interfacial decohesion or buckling of the coating on its substrate was completely absent. The test result is different from that appeared in the literature though the identical test method and the brittle coating/ductile metal substrate system are taken. It was found that this difference can be attributed to an important mechanism that the Cr coating on the steel substrate has a good adhesion, and the ultimate interfacial shear strength between the Cr coating and the steel substrate has exceeded the maximum shear flow strength level of the steel substrate. This result also indicates that the maximum shear flow strength level of the ductile steel substrate can be only taken as a lower bound estimate on the ultimate shear strength of the interface. This estimation of the ultimate interfacial shear strength is consistent with the theoretical analysis and prediction presented in the literature.

Experimental Study on Surface Deformation and Surface Wave of Fluid Convection with Free Surface

An optical diagnostic system consisting of Michelson interferometer with image processor has been developed for study of the kinetics of thermal capillary convection and buoyancy convection. This optical interferometer has been used to observe and measure surface deformation and surface wave of capillary convection and buoyancy convection in a rectangular cavity with different temperature’s sidewalls. Fourier transformation is used to image processing. The quantitative results of surface deformation and surface wave have been calculated from the interference fringe pattern. With the increasing of temperature gradient, the liquid surface slant gradually. It’s deformation has been calculated, which is related directly with temperature gradient. This is one of the characters introducing convection. Another interesting phenomenon is the inclining direction, which is different when the liquid layer is thin or thick. When the liquid layer is thin, convection is mainly controlled by thermocapillary effect. However, When the liquid layer is thick, convection is mainly controlled by buoyancy effect. Surface deformation in the present experiment are more and more declining in this process. The present experiment proved that surface deformation appears before the appearance of surface wave on fluid convection, it is related with temperature gradient, and the height of liquid layer, and lies on capillary convection and buoyancy convection. The present experiment also demonstrates that the amplitude of surface wave of thermocapillary-buoyancy convection is much smaller than surface deformation, the wave is covered by deformation.

Visualization of molecule interaction between antigen and antibody - One of ellipsometric imaging applications

It is to investigate molecule interactions between antigen and antibody with ellipsometric imaging technique and demonstrate some features and possibilities offered by applications of the technique. Molecule interaction is an important interest for molecule biologist and immunologist. They have used some established methods such as immufluorcence, radioimmunoassay and surface plasma resonance, etc, to study the molecule interaction. At the same time, experimentalists hope to use some updated technique with more direct visual results. Ellipsometric imaging is non-destructive and exhibits a high sensitivity to phase transitions with thin layers. It is capable of imaging local variations in the optical properties such as thickness due to the presence of different surface concentration of molecule or different deposited molecules. If a molecular mono-layer (such as antigen) with bio-activity were deposited on a surface to form a sensing surface and then incubated in a solution with other molecules (such as antibody), a variation of the layer thickness when the molecules on the sensing surface reacted with the others in the solution could be observed with ellipsometric imaging. Every point on the surface was measured at the same time with a high sensitivity to distinguish the variation between mono-layer and molecular complexes. Ellipsometric imaging is based on conventional ellipsometry with charge coupled device (CCD) as detector and images are caught with computer with image processing technique. It has advantages of high sensitivity to thickness variation (resolution in the order of angstrom), big field of view (in square centimeter), high sampling speed (a picture taken within one second), and high lateral resolution (in the order of micrometer). Here it has just shown one application in study of antigen-antibody interaction, and it is possible to observe molecule interaction process with an in-situ technique.

The Mitogenic and Anti-Apoptotic Activity of Tumor Conditioned Medium on Endothelium

This study was designed to observe the effect of tumor conditioned medium (TCM) on the proliferation and apoptosis of human umbilical vein endothelial cells (HUVECs). HUVECs were exposed to TCM from breast carcinoma cell line MDA-MB-231, then we measured their proliferation, apoptosis and cell cycle distribution by MTT and flow cytometery (FCM). Following the stimulation of TCM, HUVECs showed higher pro-mitogenic and anti-apoptotic ability than did the negative control group (ECGF-free medium with 20% FBS), but a similar ability to the positive control group (medium with ECGF and 20% FBS). From these results, we can conclude that breast carcinoma cell line MDA-MB-231 could secret soluble pro-angiogenic factors that induce HUVEC angiogenic switching, including cell cycle progression, proliferation and growth. The role and character of these factors remain to be further studied.

Experimentally Determined Flame Properties near Flammability Limits Under Gravity and Microgravity Conditions

Flammability limits for flames propagating in a rich propane/air mixture under gravity conditions appeared to be 6.3% C3H8 for downward propagation and 9.2% C3H8 for upward propagation. Different limits might be explained by the action of preferential diffusion of the deficient reactant (Le < 1) on the limit flames, which are in different states of instability. In one of the previous studies, the flammability limits under microgtravity conditions were found to be between the upward and downward limits obtained in a standard flammability tube under normal gravity conditions. It was found in those experiments that there are two limits under microgravity conditions: one indicated by visible flame propagation and another indicated by an increase of pressure without observed flame propagation. These limits were found to be far behind the limit for downward-propagating flame at 1 g (6.3% C3H8) and close to the limit for upward-propagating flame at 1 g (9.2% C3H8). It was decided in the present work to apply a special schlieren system and instant temperature measuring system for drop tower experiments to observe combustion development during propagation of the flame front. A small cubic closed vessel (inner side, 9 cm 9 cm 9 cm) with schlieren quality glass windows were used to study limit flames under gravity and microgravity conditions. Flame development in rich limit mixtures, not visible in previous experiments under microgravity conditions for strait photography, was identified with the use of the schlieren method and instant temperature measuring system. It was found in experiments in a small vessel that there is practically no difference in flammability limits under gravity and microgravity conditions. In this paper, the mechanism of flame propagation under these different conditions is systematically studied and compared and limit burning velocity is estimated.

Enhancement and broadening of extreme-ultraviolet supercontinuum in a relative phase controlled two-color laser field

We experimentally demonstrate the generation of an extreme-ultraviolet (XUV) supercontinuum in argon with a two-color laser field consisting of an intense 7 fs pulse at 800 nm and a relatively weak 37 fs pulse at 400 nm. By controlling the relative time delay between the two laser pulses, we observe enhanced high-order harmonic generation as well as spectral broadening of the supercontinuum. A method to produce isolated attosecond pulses with variable width and intensity is proposed. (C) 2008 Optical Society of America.

Formation of X-waves at fundamental and harmonics by infrared femtosecond pulse filamentation in air

We experimentally observe the formation of X-waves at fundamental, third harmonic, and fifth harmonic wavelengths by infrared (central wavelength at similar to 1500 nm) femtosecond laser pulse filamentation in air. By fitting the angularly resolved spectra of the fundamental and harmonic waves using X-wave relations, we confirm that all the X-waves have nearly the same group velocity, indicating that they are locked in space and time during their propagation in filament.

Digital holographic interferometry and the angular spectrum method applied to measuring the domain inversion in ferroelectric crystal

The application of digital holographic interferometry on the quantitative measurement of the domain inversion in a RuO2: LiNbO3 crystal wafer is presented. The recorded holograms are reconstructed by the angular spectrum method. From the reconstructed phase distribution we can clearly observe the boundary between the inverted and un-inverted domain regions. Comparisons with the results reconstructed by use of the Fresnel transform method are given. Factors that influence the measurement include the spectrum filter size and the spectrum movement are discussed. The spectrum filter size has an effect on the measurement of the details. Although the spectrum movement affects every single reconstructed image, it has no influence on the final measurement.

Nanosecond nonlinear absorption in Au and Ag nanoparticles precipitated glasses induced by a femtosecond laser

We obtain Au and Ag nanoparticles precipitated in glasses by irradiation of focused femtosecond pulses, and investigate the nonlinear absorptions of the glasses by using Z-scan technique with ns pulses at 532 nm. We observe the saturable absorption behavior for An nanoparticles precipitated glasses and the reverse saturable ones for Ag ones. We also obtain, by fitting to the experimental results in the light of the local field effect near and away from the surface plasmon resonance, chi(m)((3)) = 4.5 x 10(-7) and 5.9 x 10(-8) esu for m the imaginary parts of the third-order susceptibilities for Au and Ag nanoparticles, respectively. The nonlinear response of Au nanoparticles in the glass samples arises mainly from the hot-electron contribution and the saturation of the interband transitions near the surface plasmon resonance, whereas that of Ag nanoparticles in the glass samples from the interband transitions. These show that the obtained glasses can be used as optoelectronic devices suiting for different demands. (c) 2005 Elsevier B.V. All rights reserved.

Distribution of CCR2-64I and SDF1-3 ' A alleles and HIV status in 7 ethnic populations of Cameroon

Limited information is available on the prevalence among rural Africans of host genetic polymorphisms conferring resistance to HIV-1 infection or slowing HIV disease progression.We report the allelic frequencies of the AIDS-related polymorphisms CCR2-64I, SDF1-3#A, and CCR5-D32 in 321 volunteers from 7 ethnic groups in Cameroon. Allelic frequencies differed among the 7 ethnic groups, ranging from 10.8% to 31.3% for CCR2-64I and 0.0% to 7.1% for SDF1-3#A. No CCR5-D32 alleles were found. HIV seroprevalence was 6.9% in the total population and peaked at younger ages in girls and women than in boys and men. Among 15- to 54-year-olds, HIV seroprevalence varied from 2.0% to 11.1% among the village populations. Conditional logistic regression analysis using data from boys and men aged 15 to 54 years showed the number of CCR2-64I alleles to be a significant risk factor for HIV seropositivity (odds ratio per allele adjusted for age and matched on ethnic group = 6.3, 95% confidence interval: 1.3–30.3); this association was not found in women. The findings are consistent with the hypothesis that CCR2-64I alleles may delay HIV disease progression without affecting susceptibility to infection among men. We did not observe this relation among women, and other factors, such as multiple pregnancies or maternal stressors (eg, breastfeeding), may have masked any protective effect of CCR2-64I alleles. Further study of this issue among women is warranted. SDF1-3#A did not differ between HIV-seropositive and HIV-seronegative individuals but wasassociated with increasing age among HIV-seronegative women, suggesting a protective effect against HIV-1 infection.

Characterization of a fibrinogen-clotting enzyme from Trimeresurus stejnegeri venom, and comparative study with other venom proteases

Trimeresurus stejnegeri venom, which contains TSV-PA (a specific plasminogen activator sharing 60-70% sequence homology with venom fibrinogen-clotting enzymes), also possesses fibrinogen-clotting activity in vitro. A fibrinogen-clotting enzyme (stejnobin) has been purified to homogeneity by gel filtration and ion-exchange chromatography on a Mono-Q column. It is a single-chain glycoprotein with a mol. wt of 44,000. The NH2-terminal amino acid sequence of stejnobin shows great homology with venom fibrinogen-clotting enzymes and TSV-PA. Like TSV-PA, stejnobin was able to hydrolyse several chromogenic substrates. Comparative study of substrate specificities of stejnobin and other venom proteases purified in our laboratory was carried out on five chromogenic substrates. Stejnobin clotted human fibrinogen with a specific activity of 122 NIH thrombin-equivalent units/mg protein. However, stejnobin did not act on other blood coagulation factors, such as factor X, prothrombin and plasminogen. Diisopropyl fluorophosphate and phenylmethanesulfonyl fluoride inhibited its activity, whereas ethylenediamine tetracetic acid had no effect on it, indicating that it is a serine protease. Although stejnobin showed strong immunological cross-reaction with polyclonal antibodies raised against TSV-PA, it was interesting to observe that, unlike the case of TSV-PA, these antibodies did not inhibit the amidolytic and fibrinogen-clotting activities of stejnobin. (C) 1998 Elsevier Science Ltd. All rights reserved.