Molecular cloning and characterization of peroxiredoxin 6 from Chinese mitten crab Eriocheir sinensis

Peroxiredoxin is a superfamily of antioxidative proteins that play important roles in protecting organisms against the toxicity of reactive oxygen species (ROS). In this study, the full-length cDNA encoding peroxiredoxin 6 (designated EsPrx6) was cloned from Chinese mitten crab Eriocheir sinensis by using rapid amplification of cDNA ends (RACE) approaches. The full-length cDNA of EsPrx6 was of 1076 bp, containing a 5' untranslated region (UTR) of 69 bp, a 3' UTR of 347 bp with a poly (A) tail, and an open reading frame (ORF) of 660 bp encoding a polypeptide of 219 amino acids with the predicted molecular weight of 24 kDa. The conserved Prx domain, AhpC domain and the signature of peroxidase catalytic center identified in EsPrx6 strongly suggested that EsPrx6 belonged to the 1-Cys Prx subgroup. Quantitative real-time RT-PCR was employed to assess the mRNA expression of EsPrx6 in various tissues and its temporal expression in haemocytes of crabs challenged with Listonella anguillarum. The mRNA transcript of EsPrx6 could be detected in all the examined tissues with highest expression level in hepatopancreas. The expression level of EsPrx6 in haemocytes was down-regulated after bacterial challenge and significantly decreased compared to the control group at 12 h. As time progressed, the expression level began to increase but did not recover to the original level during the experiment. The results suggested the involvement of EsPrx6 in responses against bacterial infection and further highlighted its functional importance in the immune system of E sinensis. (C) 2009 Elsevier Ltd. All rights reserved.

Analysis of the expression and antioxidative property of a peroxiredoxin 6 from Scophthalmus maximus

Peroxiredoxins (Prxs) are a group of antioxidant proteins that protect cells from oxidative damage caused by various peroxides. To date, six different isoforms of peroxiredoxin (Prx1 to Prx6) have been identified, of which, Prx6 belongs to the 1-Cys Prx subfamily. Although Prx6 of several fish species have been reported at sequence level, there are very few documented studies on the potential function of fish Prx6. In this report, we describe the identification and analysis of a Prx6 homologue, SmPrx6, from turbot Scophthalmus maximus. The full length cDNA of SmPrx6 contains a 5'- untranslated region (UTR) of 60 bp, an open reading frame of 666 bp, and a 3'-UTR of 244 bp. The deduced amino acid sequence of SmPrx6 shares 81-87% overall identities with known fish Prx6. In silico analysis identified in SmPrx6 a conserved Prx6 catalytic motif, PVCTTE, and the catalytic triads putatively involved in peroxidase and phospholipase A2 activities. Expression of SmPrx6 was detected in most fish organs, with the highest expression levels found in blood and heart and the lowest level in spleen. Experimental challenges with bacterial pathogens and poly(I:C) upregulated SmPrx6 expression in liver and spleen in a manner that is dependent on the challenging agent and the tissue type. Treatment of cultured primary hepatocytes with H2O2 enhanced SmPrx6 expression in a dose-dependent manner. Recombinant SmPrx6 expressed in and purified from Escherichia coli exhibited thiol-dependent antioxidant activity and could protect cultured hepatocytes from H2O2-induced oxidative damage. Taken together, these results indicate that SmPrx6 is a Prx6 homologue with antioxidative property and is likely to be involved in both cellular maintenance and protective response during host immune defense against bacterial infection. (C) 2010 Elsevier Ltd. All rights reserved.

中华绒螯蟹（Eriocheir sinensis）Peroxiredoxin 6和Thioredoxin1基因的克隆及表达

中华绒螯蟹是我国重要的水产经济动物，近年来养殖规模不断扩大，产量持续增加。但是，伴随着养殖规模的扩大，养殖环境也日益恶化并导致了大量疾病的发生，严重制约了中华绒螯蟹养殖业的健康发展。因此，疾病预防和控制对中华绒螯蟹养殖业的可持续发展具有举足轻重的作用。与其他无脊椎动物一样，中华绒螯蟹的免疫系统没有免疫球蛋白和淋巴细胞，而是依靠由细胞免疫和体液免疫构成的固有免疫系统来对病原进行识别和清除。中华绒螯蟹的固有免疫机制的研究有助于推动中华绒螯蟹病害防治工作的开展。 本研究采用大规模EST测序方法，结合末端快速扩增（rapid amplification of cDNA ends，RACE）技术从中华绒螯蟹血淋巴中克隆到了过氧化物还原酶（peroxiredoxin，EsPrx6）和硫氧还蛋白（thioredoxin，EsTrx1）基因的cDNA 全长序列；采用实时荧光定量PCR 技术检测了这两个基因在健康个体中表达的组织分布情况以及鳗弧菌刺激后血淋巴细胞中的时序表达规律；同时，将这两个基因的编码区克隆到pET 系列载体，并在大肠杆菌中实现了重组表达，并进行了体外活性检测。 过氧化物还原酶是一个抗氧化蛋白超家族，在保护机体免受活性氧（reactive oxygen species，ROS）的伤害中发挥着重要作用。中华绒螯蟹Prx6（EsPrx6） 基因的cDNA 全长为1076 bp，5` UTR（untranslated region，UTR） 为69 bp，3` UTR 为347 bp，开放阅读框（open reading frame，ORF）为660 bp，编码219 个氨基酸的蛋白。mRNA 3`-端具有多聚腺苷酸加尾信号（polyadenylation signal）AATAAA 和polyA 尾巴。EsPrx6 的预测分子量为 24 kDa，理论等电点为6.21，具有一个保守的Prx 结构域、一个AhpC 结构域和过氧化物酶催化活性中心PVCTTE，表明EsPrx6 属于1-Cys 型Prx。在所检测的组织中均有EsPrx6 的表达，其中以肝胰腺表达量最高，为血淋巴细胞中表达量的17.4 倍。鳗弧菌刺激后，血淋巴细胞中EsPrx6 的表达下降，到12 h 时，实验组显著低于对照组（P<0.05）；随时间推移，表达水平逐渐回升，但在整个实验期间，都没有恢复到起始水平。将EsPrx6 进行体外重组并在大肠杆菌E. coli BL21（DE3）中实现表达，重组EsPrx6 具有预期的抗氧化活性和过氧化物酶活性，其中抗氧化活力为14.69 U/mg 蛋白，高于相同条件下GSH 的抗氧化力（P<0.05），过氧化物酶活力为23.46 U/mg 蛋白。结果表明，EsPrx6 作为一种重要的抗氧化剂，在中华绒螯蟹抵御ROS 可能引起的氧化损伤方面具有重要作用。 硫氧还蛋白是广泛存在于生物体内的一种具有硫醇依赖性的具有还原活性的蛋白。中华绒螯蟹Trx1（EsTrx1）基因的cDNA 全长为641 bp，5` UTR 为17 bp，3` UTR 为306 bp，开放阅读框为318 bp，编码105 个氨基酸。EsTrx1 的预测分子量为12.2 kDa，理论等电点为4.8。EsTrx1 不含信号肽，其氨基酸序列与其他动物的Trx1s 具有高度相似性，如与地中海黄蝎的Trx1 相似度达到73%；而与其他物种Trx2 的同源性很低，相似度仅为14.3-22.8%，表明EsTrx1 属于Trx1 亚族。实时荧光定量PCR 检测发现，EsTrx1 在鳃、性腺、肝胰腺、肌肉、心脏和血淋巴细胞中都有表达。血淋巴细胞中EsTrx1 mRNA 的表达量在菌刺激后上升，刺激后6 h，实验组表达量显著高于对照组和空白组（P<0.05），然后逐渐恢复到刺激前水平。为进一步探讨其生物学功能，将EsTrx1 进行体外重组并在大肠杆菌E. coli BL21（DE3）得到表达，重组EsTrx1 具有预期的氧化还原调节活性，抗氧化活力为3.06 U/mg，且抗氧化活力高于GSH（P<0.05）。rEsTrx1 的二硫键还原活力为5.03，低于凡纳滨对虾的二硫键还原活力（10.44），接近于大肠杆菌（4.93），小牛胸腺（6.50）和小牛肝脏（5.09），而高于鲍鱼Trx2（1.83）活力。结果表明，EsTrx1 在生理条件下能够作为一种重要的抗氧化剂，参与对细菌感染的免疫应答反应。

Molecular cloning, characterization and mRNA expression of peroxiredoxin in Zhikong scallop Chlamys farreri

Peroxiredoxin V (PRX V) is known as an atypical 2-cysteine peroxiredoxin that protects the organisms against various oxidative stresses and functions in signal transduction. The cDNA of a PRX V gene (designated as CfPRX) was cloned from scallop Chlamys farreri. The full-length sequence of CfPRX cDNA was of 2,179 bp with a 564 bp open reading frame encoding a peptide of 187 amino acids. Sequence comparison showed that CfPRX shared higher identities with PRX Vs than that with other isoforms of PRX, indicating CfPRX was a member of the PRX V family. Fluorescent real-time quantitative PCR analysis revealed the presence of CfPRX transcripts in gill filaments, adductor muscle, heart, gonad, kidney and hemocytes, and the stimulation of Listonella anguillarum significantly (P < 0.01) enhanced the mRNA expression of CfPRX in hemocyte. These results indicated that CfPRX was a constitutive and inducible acute-phase protein which was involved in the immune resistance to L. anguillarum stimulation.

Direct Numerical Simulation of a Spatially Evolving Supersonic Turbulent Boundary Layer at Ma=6

Direct numerical simulation is carried out for a spatially evolving supersonic turbulent boundary layer at free-stream Mach number 6. To overcome numerical instability, the seventh-order WENO scheme is used for the convection terms of Navier-Stokes equations, and fine mesh is adopted to minimize numerical dissipation. Compressibilty effects on the near-wall turbulent kinetic energy budget are studied. The cross-stream extended self-similarity and scaling exponents including the near-wall region are studied. In high Mach number flows, the coherence vortex structures are arranged to be smoother and streamwised, and the hair-pin vortices are less likely to occur.

The Effect of Conical Flowfields on the Performance of Waveriders at Mach 6

The performance of 23 kinds of waveriders, derived from different conical flowfields, is analyzed by the numerical computation under the conditions of fight speed of Mach 6, attack angle of 0° and flight altitude of 30 km. These results indicate that the performance is influenced by the shapes and the width to height ratios (W/H ) of generating cones. The geometrical parameter and the lift coefficient are proportional to W/H, while the drag coefficient and the lift to drag ratio (L/D ) have extreme values. Considering the base drag and the computation errors, the waverider with the highest L/D is cut from the elliptical cone’s flowfield (W/H = 1.5―1.618), and the configuration with the lowest drag can also be obtained at W/H = 1:1.5. Accordingly, good suggestions are proposed for practical design based on these computational results.

6马赫锥体流场对乘波体性能的影响及规律

以CFD计算为分析工具，在6马赫飞行速度、0°飞行攻角和30km飞行高度的设计条件下，综合分析了23种源自不同锥体流场所获乘波体的性能．分析结果表明，基本锥体的截面形状及截面宽高比均对乘波体性能有较大影响；当基本锥体的宽高比变化时，相应乘波体几何参数和升力系数的变化基本与之呈正比关系，而阻力系数及升阻比则出现极值．此外，我们发现在此飞行状态下，综合考虑乘波体底部阻力及计算误差等因素，当基本锥体为椭圆锥，且截面椭圆宽高比在1．5～1．618时，所获得的乘波体具有最大的升阻比；而当截面椭圆宽高比约为1：1．5时，所获得乘波体阻力最小．依据所得的计算结果，对于乘波飞行器的实际设计给出了相应的建议．

Experimental Studies on Model Scramjet in a Mach 6 High Enthalpy Free-Jet Wind Tunnel

A side-wall compression scramjet model with different combustor geometries has been tested in a propulsion tunnel that typically provides the testing flow with Mach number of 5.8, total temperature of 1800K, total pressure of 4.5MPa and mass flow rate of 4kg/s. This kerosene-fueled scramjet model consists of a side-wall compression inlet, a combustor and a thrust nozzle. A strut was used to increase the contraction ratio and to inject fuels, as well as a mixing enhancement device. Several wall cavities were also employed for flame-holding. In order to shorten the ignition delay time of the kerosene fuel, a little amount of hydrogen was used as a pilot flame. The pressure along the combustor has an evident raise after ignition occurred. Consequently thrust was observed during the fuel-on period. However, the thrust was still less than the drag of the scramjet model. For this reason, the drag variation produced by different strut and cavities was tested. Typical results showed that the cavities do not influence the drag so much, but the length of the strut does.

Visual C++ 6.0学习教程

MicrosoftVisualC十十6.0作为Microsoft Visual Studio的重要组成部分，包含了迄今为止功能最为强大的基于Windows的应用框架，在同类产品中处于领先地位。VisualC十十6.0是Microsoft迄今为止最全面、最完善的程序开发工具，为了适应各种编程风格，该软件提供了各种各样的辅助工具，在发挥编程能力和提高灵活性方面达到了空前的水平。与以往VisualC十十的各种版本相比较，VisualC十十6.0在编程环境、程序语言技术等方面做了许多改进，从而使VisualC十十更加适合专业程序员快速进行应用程序的开发。

本书内容丰富、图文并茂，是一本适合各种读者学习VisualC十十6.0的优秀参考书。

目 录
第一章 VisualC十十6.0简介及安装
1.1VisualC十十6.0新特性
1.2viSualC十十6.0开发环境简介
1.3如何学习使用VisualC十十6.0
1.4VisualC十十6.0的安装
第二章 走进C十十的世界
2.1类和对象的简介
2.2继承和多态性――一个具体的例子
2.3内嵌对象
2.4在栈中申请对象
2.5全程对象的申请
2.6对象之间的相互关系――指针数据成员
2.7this指针的使用
2.8对指针的引用
2.9友元类和友元函数
2.10静态类成员
2.11重载运算符
2.12从代码中分离出类定义
2.13匈牙利表示法
第三章 VisualC十十6.0的编程环境
3.1VisualC十十6.0主窗口
3.2VisualC十十6.0工具栏
3.3VisualC十十6.0菜单栏
3.4项目与项目工作区
3.5资源与资源编辑器
第四章 编一个最简单的VC十十程序
4.1什么是AppWizard？
4.2迎接你的第一个AppWizard程序
4.3“Iamaprogrammer.”在哪儿？
第五章 程序框架入门
5.1一个简化过的程序框架
5.2WinMain（）：第一个动作
5.3登记窗口类
5.4创建一个窗口
5.5显示窗口
5.6显示出那条消息
5.7窗口类与窗口对象
第六章 消息循环
6.1在消息循环中兜圈子
6.2对事件做出响应：WindowFun（）
6.3响应不同的消息
6.4现在你还跟得上吗？
6.5设备界面进行交互
第七章 精通程序框架
7.1WinMain（）函数在哪儿？
7.2应用程序框架和源文件
7.3工具条、状态条和打印等选项
7.4程序的控制流程
第八章 使用classWizard编程
8.1使用ClassWizard添加消息处理函数
8.2classWizard功能介绍
8.3传送鼠标消息
8.4保存鼠标绘图的信息
第九章 视图与文档
9.1Document－View模式
9.2从视图中分离出文档
9.3保存文档
9.4再访MyProg2.cpp
第十章 对象连接与嵌入（OLE）及其自动化
10.1公共对象模式（COM）
10.2类厂（classfactory）
10.3OLE自动化
10.4IDispatch接口
第十一章 动态连接库（DLLs）
11.1为什么使用DLL
11.2传统的DLL
11.3MFC库DLL
11.4MyProg4A――编写自己的类库扩展DLL
11.5MyProg4B――使用MFC库扩展DLL
11.6资源访问
第十二章 图形设备接口
12.1设备环境类
12.2GDI对象
12.3Windows的颜色映射
12.4映射方式
12.5字体
12.6MyProg3例程序
12.7MyProg3B程序
12.8MyPr0g3C例程序――使用CScrollView
第十三章 对话框
13.1在状态条上显示对话控件的帮助信息
13.2利用Fi1eOpen通用对话框打开多个文件
13.3定制通用文件对话框
13.4扩展和缩减一个对话框
13.5显示一个模式或无模式对话框
13.6编写定制的DDX/DDV例程
第十四章 剖析工具Spy十＋
14.1窗体
14.2消息
14.3进程与线程
第十五章 代码调试
15.1TRACE
15.2调试框架
15.3自我诊断
15.4调试代码的作用
15.5用Dump（）显示对象的信息
15.6检查内存

Laser action from 1,3,5,7-tetramethyl-2,6-diethyl-8-n-propyl pyrromethene-BF2

We measured spectroscopic and laser action properties of a novel 8-position substituted pyrromethene-BF2, namely 1,3,5,7-tetramethyl-2,6-diethyl-8-n-propyl pyrromethene-BF2 complex. The laser action was performed with the corresponding dye solution in ethanol, which was placed in a Littman-type laser cavity pumped by the second harmonic of a Q-switched Nd:YAG laser. The spectroscopic measurements clearly indicated that the corresponding dye solution in ethanol exhibited intense absorption in the visible spectral region with large fluorescence quantum yield. It possesses rather low triplet-triplet absorption in the spectral region 460-550 nm and almost negligible triplet-triplet absorption in the lasing spectral region. As a consequence, it lases nearly as efficiently as commercially available benchmark laser dyes such as Rhodamine-6G and outperformed them in wavelength tunability in our laser cavity and pump geometry. (C) 2002 Optical Society of America.

2-氨基-6-乙氧基苯并噻唑类偶氮染料及其金属鏊合物的合成及光学热学性能研究

合成了2-（2-氨基-6-乙氧基苯并噻唑基偶氮）-5-（N,N-二乙基氨基）三氟甲基磺酰苯胺偶氮染料（EBTDATFS）及其与乙酸镍、乙酸钴、乙酸铜、乙酸锌等金属盐鏊合的金属鏊合物。通过红外光谱、紫外-可见吸收光谱和MALDI质谱等对染料及其金属鏊合物进行了结构表征;使用旋涂方法在K9玻璃和抛光的单晶硅基片上制备薄膜;研究了镍金属鏊合物的热学性能;使用椭偏仪研究了Ni和Zn鏊合物的光学常数。结果表明：4种金属鏊合物薄膜最大吸收光谱为621-629nm,且长波边吸收峰陡峭;TGA-DSC测试结果表明镍金属鏊

铒玻璃在1．54μm实现1 Hz下3 J和5 Hz下0．6 J的激光输出

近年来,随着激光告警、激光指示、风速测量、激光雷达尤其是激光美容等方面的需求逐渐增加,要求掺铒激光玻璃能够实现比以往更高重复频率以及更大能量的激光输出,其中对脉冲能量的要求达1～10 J。

Property studies of optical waveguide formed by 6.0 MeV carbon ion implantation into Nd : silicate glass

Nd:silicate glass was implanted at room temperature by 6.0 MeV C3+ ions with a dose of 2.0 x 10(15) ions cm(-2). A waveguide with thickness of about 6.3 mu m was formed. The prism-coupling method was used to observe the dark modes of the waveguide at 633 nm and 1539 nm, respectively. There are three dark modes at 633 nm, of which one is the enhanced-index mode. The propagation loss of the enhanced-index mode in the waveguide measured at 633 nm is 0.42 dB cm(-1) after annealing at 217 degrees C for 35 min. The reflectivity calculation method was applied to simulate the refractive index profiles in the waveguide. The mode optical near-field output at 633 nm was presented.