Studies on electrocatalytic performance of titanium oxide electrode modified with Pt toward the oxidation of methanol

Electrocatalytic performance of the Pr-TiOx/Ti electrode prepared with electrochemical reduction-oxidation method toward the oxidation of methanol has been studied, The experimental results showed that the Pt-TiOx/Ti electrode has a high electrocatalytic activity and good stability for the electrocatalytic oxidation of methanol, By means of electrochemical, XPS, STM and in-situ FTIR techniques, it was found that one reason for the electrode to exhibit an excellent performance is attributed to the high dispersion between nanosized Pt and TiOx particles, The low adsorption ability of the intermediate derived from methanol, such as linearly adsorbed CO species on the electrode surface due to the interaction between Pt and TiOx, also results in the excellent performance.

Photorefractive performance of a novel multifunctional inorganic-organic hybridized nanocomposite sensitized by CdS nanoparticles

A novel multifunctional inorganic-organic photorefractive (PR) poly(N-vinyl)-3-[p-nitrophenylazolcarbazolyl-CdS nanocomposites with different molar ratios of US to poly(N-vinyl)-3-[p-nitrophenylazo]carbazolyl (PVNPAK) were synthesized via a postazo-coupling reaction and chemically hybridized approach, respectively. The nanocomposites are highly soluble and could be obtained as film-forming materials with appreciably high molecular weights and low glass transition temperature (T,) due to the flexible spacers. The PVNPAK matrix possesses a highest-occupied molecular orbital value of about -5.36 eV determined from cyclic voltammetry. Second harmonic generation (SHG) could be observed in PVNPAK film without any poling procedure and 4.7 pm/V of effective second-order nonlinear optical susceptibility is obtained. The US particles as photosensitizers had a nanoscale size in PVNPAK adopting transmission electron microscopy. The improvement of interface quality between US and polymer matrix is responsible for efficient photoinduced charge generation efficiency in the nanocomposites. An asymmetric optical energy exchange between two beams on the polymer composites PVNPAK-CdS/ECZ has been found even without an external field in two-beam coupling (TBC) experiment, and the TBC gain and diffraction efficiency of 14.26 cm(-1) and 3.4% for PVNPAK-5-CdS/ECZ, 16.43 cm(-1) and 4.4% for PVNPAK-15-CdS/ECZ were measured at a 647.1 nm wavelength, respectively.

稀土(Er, Nd, Yb, Pr, Ho, Sm)有机/无机杂化材料的制备及发光性能研究

目前，国内外对于铕和铽等稀土配合物的可见区发光和应用都有大量研究，但对具有近红外发光（800-1700 nm）性能的稀土配合物的研究还处于起步阶段。由于稀土的近红外发光在光纤通讯、激光系统及诊断学等方面应用具有特殊的优点，越来越引起人们的兴趣和重视。 稀土近红外发光配合物的致命弱点是其光、热和化学稳定性较差，从而限制了其在很多领域的实际应用。而溶胶－凝胶材料和介孔材料具有良好的光、热和化学稳定性，能改善客体分子的结构环境和化学微环境，从而能有效提高客体分子的发光性能。因此，本论文将具有优良近红外发光性能的稀土配合物分别与上述两种基质复合，从实验和理论研究稀土近红外发光杂化材料的性能和应用价值，制备出具有良好稳定性的高效稀土近红外发光杂化材料，以期为光纤通讯、激光等领域提供潜在的候选材料。围绕这一宗旨，开展了如下工作： 通过原位技术分别得到了掺杂和嫁接[Ln(dbm)3phen]化合物（Ln = Er, Nd, Yb）的杂化凝胶材料，Ln-D-P gel和Xerogel-Ln。通过对其近红外发光性能的研究，表明材料中配体能很好的保护稀土离子，并将能量有效的传递给稀土离子。采用Judd-Ofelt理论对所得部分材料进行了光谱分析，基于实验数据和理论分析表明其具有潜在的光放大和激光应用价值。 选择了两种含全氟化烷基链的β-二酮配体Hhfth和Htfnb，通过功能化的phen-Si配体，将三元配合物[Ln(hfth)3phen] (Ln = Er, Nd, Yb, Sm)和[Pr(tfnb)3phen]成功共价嫁接到介孔MCM-41和SBA-15杂化材料中，得到的衍生材料Ln(hfth)3phen–MCM-41、Pr(tfnb)3phen–MCM-41和Ln(hfth)3phen–SBA-15、Pr(tfnb)3phen–SBA-15都保持了高度有序的介孔p6mm结构，并展现出稀土离子特征的近红外发射。所得稀土配合物功能化的材料的发射光谱能完全覆盖对光通讯极具应用价值的1300-1600nm区域。 通过对Er(dbm)3phen–M41(X, Y) (X = 1~14, Y = 3, 6, 12, 18, 24 h)材料系统的比较研究，选择了X = 12, Y = 6作为合成目标材料的优化参数，通过功能化的phen-Si配体将[Ln(dbm)3phen]配合物共价嫁接于有序介孔MCM-41和SBA-15中(Ln = Er, Nd, Yb)，所得两类材料Ln(dbm)3phenM41和Ln(dbm)3phenS15都保持了很好的介孔有序性，并具有良好的近红外发光性能。通过对Ln(dbm)3phenM41和Ln(dbm)3phenS15两类材料发光行为的比较，以及两类材料中稀土离子的含量及孔结构的分析，推出以SBA-15为载体得到的材料在相对发光强度和荧光寿命上，均比以MCM-41为载体的材料有所提高。 通过对8－羟基喹啉配体进行改性，合成了具有双功能的配体Q-Si，继而合成了共价嫁接8－羟基喹啉衍生物的介孔杂化材料Q–SBA-15，其形貌均一，并具有高度有序的介孔p6mm结构。通过配体交换反应，得到了嫁接稀土喹啉配合物的具有近红外发光性能的介孔杂化材料LnQ3–SBA-15 (Ln = Er, Nd, Yb)，其仍然保持高度有序的介孔结构，且外形呈现与母体材料Q–SBA-15相似的弯曲圆柱状。激发配体的吸收，LnQ3–SBA-15材料都分别展现出相应稀土离子特征的近红外发射，并详细分析和讨论了所得介孔杂化材料的近红外发光性能。