Thermocapillary flow in an annular liquid layer painted on a moving fiber

In the present paper, a theoretical model is studied on the flow in the liquid annular film, which is ejected from a vessel with relatively higher temperature and painted on the moving solid fiber. A temperature gradient, driving a thermocapillary flow, is formed on the free surface because of the heat transfer from the liquid with relatively higher temperature to the environmental gas with relatively lower temperature. The thermocapillary flow may change the radii profile of the liquid film. This process analyzed is based on the approximations of lubrication theory and perturbation theory, and the equation of the liquid layer radii and the process of thermal hydrodynamics in the liquid layer are solved for a temperature distribution on the solid fiber.

Rheological effect on thermocapillary flow of a liquid film jet painted on a moving boundary

In the present paper, a liquid (or melt) film of relatively high temperature ejected from a vessel and painted on the-moving solid film is analyzed by using the second-order fluid model of the non-Newtonian fluid. The thermocapillary flow driven by the temperature gradient on the free surface of a Newtonian liquid film was discussed before. The effect of rheological fluid on thermocapillary flow is considered in the present paper. The analysis is based on the approximations of lubrication theory and perturbation theory. The equation of liquid height and the process of thermal hydrodynamics of the non-Newtonian liquid film are obtained, and the case of weak effect of the rheological fluid is solved in detail.

Short-term morphological changes after sand-digging during a sand sculpture activity

The morphology of the beach backshore and foreshore at Huiquan Bay, Qingdao, China, is characterized by a single intertidal sandbar system with a spring tide range of 4.59 m. The beach was measured with a laser total station of Leica TPS402. Contours of the beach were generated using data collected in March and November 2005. The survey method provided 2 mm measuring accuracy and 4-10 m horizontal spacing. The net accretion volume of the foreshore was about 11, 215 m(3) from March to November. After sand sculpture activity, the axis of the sand trough migrated onshore from about 3.5 m to 17.5 m on the foreshore beach in November. At the same time, the axis of the sandbar crest migrated onshore no more than 42.25 m on the northwest foreshore; and it migrated offshore no more than 23.75 m on the southeast foreshore. On the northwest and southeast foreshore beach, two strips of erosion areas with a thickness of 0-0.2 m appeared on the sandbar crest. Accretion occurred at the bottom of the sand trough with a thickness of similar to 0.2-0.6 m. The sandbar height decreased after sand sculpture activity, and it was no more than 0.7 m in March and 0.6 m in November. Human activities, such as sand digging on the sandbar crest during sand sculpture activity, also can disturb the beach morphology of intertidal bar systems. This phenomenon also was validated by comparison of beach morphology, the results of a color artificial tracer experiment and a sediment transportation trend prediction.

Mapping chromosomal homologies between humans and two langurs (Semnopithecus francoisi and S-Phayrei) by chromosome painting

Chromosomal homologies were established between human and two Chinese langurs (Semnopithecus francoisi, 2n=44, and S. phayrei, 2n=44) by chromosome painting with chromosome-specific DNA probes of all human chromosomes except the Y. Both langur species showed identical hybridization patterns in addition to similar G-banding patterns. In total, 23 human chromosome-specific probes detected 30 homologous chromosome segments in a haploid langur genome. Except for human chromosomes 1, 2, 6, 16 and 19 probes, which each gave signals on two non-homologous langur chromosomes respectively, all other probes each hybridized to a single chromosome. The results indicate a high degree of conservation of chromosomal synteny between human and these two Chinese langurs. The human chromosome 2 probe painted the entire euchromatic regions of langur chromosomes 14 and 19. Human chromosome 1 probe hybridized to three regions on langur autosomes, one region on langur chromosome 4 and two regions on langur chromosome 5. Human 19 probe hybridized on the same pattern to one region on chromosome 4 and to two regions on langur chromosome 5, where it alternated with the human chromosome 1 probe. Human 6 and 16 probes both hybridized to one region on each of the two langur autosomes 15 and 18. Only two langur chromosomes (12 and 21) were each labelled by probes specific for two whole human chromosomes (14 and 15 and 21 and 22 respectively). Comparison of the hybridization patterns of human painting probes on these two langurs with the data on other Old World primates suggests that reciprocal and Robertsonian translocations as will as inversions could have occurred since the divergance of human and the langurs from a common ancestor. This comparison also indicates that Asian colobines are karyotypically more closely related to each other that to African colobines.

Dog chromosome-specific paints reveal evolutionary inter- and intrachromosomal rearrangements in the American mink and human

Forty chromosome-specific paint probes of the domestic dog (Canis familiaris, 2n = 78) were used to delineate conserved segments on metaphase chromosomes of the American mink (Mustela vison, 2n = 30) by fluorescence in situ hybridisation. Half of the 38 canine autosomal probes each painted one pair of homologous segments in a diploid mink metaphase, whereas the other 19 dog probes each painted from two to five pairs of discrete segments. In total, 38 canine autosomal paints highlighted 71 pairs of conserved segments in the mink. These painting results allow us to establish a complete comparative chromosome map between the American mink and domestic dog. This map demonstrates that extensive chromosome rearrangements differentiate the karyotypes of the dog and American mink. The 38 dog autosomes could be reconstructed from the 14 autosomes of the American mink through at least 47 fissions, 25 chromosome fusions, and six inversions. Furthermore, comparison of the current dog/mink map with the published human/dog map discloses 23 cryptic intrachromosomal rearrangements in 10 regions of conserved synteny in the human and American mink genomes and thus further refined the human/mink comparative genome map. Copyright (C) 2000 S. Karger AG, Basel.

Triploid origin of the gibel carp as revealed by 5S rDNA localization and chromosome painting

5S ribosomal DNA (rDNA) was isolated and sequenced from the gibel carp Carassius auratus gibelio with 162 chromosomes and crucian carp Carassius auratus with 100 chromosomes, and fluorescent probes for chromosome localization were prepared to ascertain the ploidy origin and evolutionary relationship between the two species. Using fluorescence in-situ hybridization (FISH), major 5S rDNA signals were localized to the short arms of three subtelocentric chromosomes in the gibel carp and to the short arms of two subtelocentrics in the crucian carp. In addition, some minor signals were detected on other chromosomes of both species. Simultaneously, six chromosomes were microdissected from the gibel carp metaphase spreads using glass needles, and the isolated chromosomes were amplified in vitro by degenerate oligonucleotide primed-polymerase chain reaction (DOP-PCR). Significantly, when the DOP-PCR-generated probes prepared from each single chromosome were hybridized, three same-sized chromosomes were painted in each gibel carp metaphase, whereas only two painted chromosomes were observed in each crucian carp metaphase spread. The data indicate that gibel carp is of triploid origin in comparison with diploid crucian carp.

中国蔷薇属芹叶组（Rosa Sect. Pimpinellifoliae DC. ex Ser.）的分类学研究

本研究通过我国CDBI、 KUN、PE、SZ等主要标本馆约3, 500份馆藏标本的研究和野外考察相结合，对我国蔷薇属（Rosa L.）芹叶组(Sect. pimpinellifoliae DC. ex Ser.）植物以及相关组的一些种进行了性状特征、形态和微形态的研究，对该组的一些种的形态特征描述进行了补充，同时给出详细的地理和海拔范围分布图。综合花粉以及种子（瘦果）形态的研究结果重新制订了分种检索表，同时，对该组一些形态相近容易混淆的种进行了对比研究，特别对一直存在争议的绢毛复合体（绢毛蔷薇R. sericea Lindl.和峨眉蔷薇R. omeiensis Rolfe）进行了大量宏观形态特征的研究，并用光学显微镜（LM）和扫描电镜(SEM)对二者的花粉及种子形态、微形态进行对比研究和分析，主要研究内容包括： 1. 芹叶组孢粉研究 对芹叶组的10个种及相关的4个组共17个种（18个样品）的植物花粉进行了光镜和扫描电镜观察和比较研究。研究结果表明：蔷薇属植物花粉粒大小为中等偏小，极轴长23.98[21.82(R. graciliflora Rehd. et Wils.)～29.18(R. tsinglingensis Pax. et Hoffm.)] μm，赤道轴长28.65[24.15（R. graciliflora）～34.70(R. davidii Crép.)] μm；花粉属辐射对称等极单花粉，花粉形态赤道面观呈球形到超长球形；极面观为三裂圆形或近圆形,三孔沟，孔缘加厚,具中部突起的桥状盖。花粉外壁纹饰为条纹状，光镜下形态特征相差不大；在电镜下外壁条纹和脊沟内穿孔的形状、大小和频度等特征，常具组至种水平上的可见变异，可作为组至种水平划分的依据。 根据花粉外壁条纹特征及穿孔形状和数目等特征，本研究将这些植物的花粉归为5个类型，并编制了分组检索表。同时，根据条纹状的清晰度，排列方式、条纹形状、穿孔大小及其频度等方面的差异，各有特点，对该组的10个种编制了分种检索表。 2. 芹叶组种子形态研究 应用光学显微镜和扫描电镜对我国蔷薇属芹叶组14个种及相关组5个组共36种植物的种子宏观形态及种皮微形态特征进行了观察研究。结果显示，蔷薇属种子形态多样,形状分别为肾形、卵形或锥形等；种子颜色以淡棕色、褐色以及土黄色为主；种子大小种间相差悬殊，相对体积为（长×宽×厚）36.66（4.79～114.47) mm3。光镜下，种子宏观形态特征具组内一致性，在扫描电镜下种子表面结构特征因种而异，其纹饰以网纹为主，可分为3种类型，即近平滑型、负网纹型和网纹型。研究结果表明，蔷薇属种子表面纹饰与地理分布关系不大,具有组及种内稳定性。其种子形态、大小、表而纹饰类型等特征可作为蔷薇属组及种水平上的分类依据。 结合蔷薇属花粉形态研究结果，得出蔷薇属种皮微形态特征与花粉外壁纹饰特征相吻合，在代表组及种的特征上具相关性的结论。同时根据种子形态、微形态结构特征的组间区别和种间差异编制了分组及芹叶组14个种的分种检索表。 3. 绢毛蔷薇复合体的研究 通过对大量标本的研究、野外观察以及扫描电镜对绢毛蔷薇复合体的花粉形态和种皮表面结构进行研究，通过对小叶、花粉及种子的形态定量分析结果支持Rowley (1959)的观点，将峨眉蔷薇处理为绢毛蔷薇的一个变种。 综上研究结果得出，蔷薇属植物的小叶片数目、花被基数以及花粉及种子形态等性状是较为稳定的，这些特征可很好的作为分类学依据。 The morphology, pollen exine sculpture and seed coat structure of the species of Rosa sect. Pimpinellifoliae and related sections were studied.About 3,500 herbarium specimens at CDBI, KUN, PE, and SZ were examined. Field work in Sichuan and Yunnan were conducted. Revisions of some species were carried out and a new key to species of sect. Pimpinellifoliae was proposed based on morphology, pollen exine sculpture and seed coat structure, Detailed morphological descriptions, geographical distributions and the altitudinal ranges of some taxa are given. The systematics of the species complex, the Rosa sericea complex (R. sericea Lindl. & R. omeiensis Rolfe), was emphasized. This thesis focused on the following three aspects: 1. Pollen morphology of Rosa sect. Pimpinellifoliae The pollen morphology of 18 samples representing 10 species of the Eurasian Rosa sect. Pimpinellifoliae and 7 additional species of related sections was investigated under LM and SEM. The pollen grains are monadic, actinomorphic, equipolar, medium-sized, spheroidal to perprolate in equatorial view, 3-lobed circular or semi-circular in polar view, crassimarginate, pontoperculate, and with striate exine sculpture. The striate sculpture varies among sections and species. The equatorial axis ranges from 17.97 μm (R. sikangensis) to 29.18 μm (R. tsinglingensis) with an average of 23.98 μm in length, while polar axis varies from 24.15 μm (R. gracilifolra) to 34.70 μm (R. davidii) with an average of 28.65 μm in length. The pollens can be divided into five types based on striate sculpture and a key to the sections sampled was proposed accordingly. The pollen morphology of species of sect. Pimpinellifoliae is more homogeneous and different from other sections sampled and did not support the two-series subdivisions in sect. Pimpinellifoliae. A key is also provided based on characers of pollen morphology among species in sect. Pimpinellifoliae. 2. Seed coat structure of Rosa sect. Pimpinellifoliae The seed coat structure of 39 samples representing 14 species of Rosa sect. Pimpinellifoliae and 12 additional species of related sections was investigated under LE and SEM. The seed relative volume (Length × width × thickness) ranges from 4.79 to 114.47 mm3 with an average of 36.66. mm3. The seeds are reniform, ovate or oblong in shape, with orange-brown, light brown or deep brown color. Seed coat sculpture was reticulate or striate-like reticulate. There was no difference in sculpture character of various speices under LM, while three types of seed coat sculpture were identified under SEM and a key to species based on the seed coat sculpture was provided. The three types of seed coat sculpture were nearly smooth, areolate and reticulate. The study of the seed coat sculpture of same species sampled from different populations showed that characters on the seed coat are stable, and thus the size, shape and seed coat sculpture can be used in species level identification. Interestingly, characters in the seed coat sculpture and the pollen morphology in sect. Pimpinellifoliae are consistent at in specific or sectional levels. A key to the 14 species sampled was given based on seed coat sculpture. 3. The study on Rosa sericea complex The Rosa sericea complex contains R. omeiensis and R. sericea. They are morphologically similar to one another and the systematic status of R. omeiensis has been controversial. In this study we examined large numbers of herbarium specimens of R. omeiensis and R. sericea and conducted field observations in the Hengduan Mts.. We also performed SEM study of pollen morphology and seed coat structure of R. omeiensis and R. sericea. We further carried out intensive morphometric study on the leaflet, pollen, and seed morphology. Our results showed that R. omeiensis should be sunk to be a variety of R. sericea, just as Rowley’s treatment in 1959. In conclusion, the features in the number of leaflet and petal, and the morphological character on pollen and seed are relatively stable. Therefore these characters are very useful in taxon delimition.

A new kind of potassium sensor based on capacitance measurement of mimic membrane

A novel type of potassium sensor based on the capacitance change of valinomycin-incorporated bilayer supported on a gold electrode has been developed and characterized. The lipid membrane was Formed by painted method and monitored simultaneously by capacitance variation. The capacitance of the electrode-supported membrane was found to be modulated by different concentrations of K+. Investigating the capacitance change allows a simple and specific technique for the measurement of potassium ion in solution. Especially, the homemade capacitance meter is, to our knowledge, used to monitor the bilayer membrane formation and detect K+ for the first time. It has been proved that this capacitance measurement is a very useful technique because it is simple and sensitive compared to the other methods.

K+ sensors based on supported alkanethiol/phospholipid bilayers

A novel kind of K+ sensor with valinomycin-incorporated bilayers supported on a gold electrode consisting of self-assembled alkanethiol monolayers (SAMs) and a lipid monolayer has been fabricated successfully. The lipid monolayer is deposited on the alkylated surface of the first alkanethiol monolayer through three different methods, such as the Langmuir-Blodgett (LB) technique, painted method and painted-frozen method. The response of K + sensors produced by a painted or painted-frozen lipid monolayer on an alkanethiol alkylated gold electrode is larger than that by the LB method, which is due to the difference in fluidity of the three kinds of bilayers. Selectivity coefficients KK+, Na+, KK+, Li+, KK+, Ca2+ and KK+, Mg2+ are 10(-4), 10(-4), 2 x 10(-5) and 3 x 10(-5) respectively, and there is no obvious difference among different fabricating methods. A linear response toward the potassium ion was found in the range from 10(-1) M to 10(-5) M with the detection limit of 10(-6) M. The sensor has a slope of 60 mV per decade. Meanwhile, the longevity of the sensor was improved obviously for at least two months at about -10 degrees C. The higher stability shows the possibility to fabricate a practical biosensor.

Supported phospholipid membranes: Comparison among different deposition methods for a phospholipid monolayer

Supported lipid membranes consisting of self-assembled alkanethiol and lipid monolayers on gold substrates could be produced by three different deposition methods: the Langmuir-Blodgett (L-B) technique, the painted method, and the paint-freeze method, By using cyclic voltammetry, chronoamperometry/chronocoulometry and a.c. impedance measurements, we demonstrated that lipid membranes prepared by these three deposition methods had obvious differences in specific capacitance, resistance and thickness. The specific capacitance of lipid membranes prepared by depositing an L-B monolayer on the alkanethiol alkylated surfaces was 0.53 mu Fcm(-2), 0.44 mu Fcm(-2) by the painted method and 0.68 mu Fcm(-2) by the paint-freeze method. The specific conductivity of lipid membranes prepared by the L-B method was over three times lower than that of the painted lipid membranes, while that of the paint-freeze method was the lowest. The difference among the three types of lipid membranes was ascribed to the influence of the organic solvent in lipid films and the changes in density of the films. The lipid membranes prepared by the usual painted method contained a trace amount of the organic solvent. The organic solvent existing in the hydrocarbon core of the membrane reduced the density of the membrane and increased the thickness of the membrane. The membrane prepared by depositing an L-B monolayer containing no solvent had higher density and the lowest fluidity, and the thickness of the membrane was smaller. The lipid membrane prepared by the paint-freeze method changed its structure sharply at the lower temperature. The organic solvent was frozen out of the membrane while the density of the membrane increased greatly. All these caused the membrane to exist in a ''tilted'' state and the thickness of this membrane was the smallest. The lipid membrane produced by the paint-freeze method was a membrane not containing organic solvent. This method was easier in manipulation and had better reproducibility than that of the usual painting method and the method of forming free-standing lipid film. The solvent-free membrane had a long lifetime and a higher mechanical stability. This model membrane would be useful in many areas of scientific research.