7 resultados para Paclitaxel
em Chinese Academy of Sciences Institutional Repositories Grid Portal
Resumo:
By means of "emulsion-electrospinning", both hydrophobic and hydrophilic drugs, paclitaxel (PTX) and doxorubicin hydrochloride (DOX), were successfully loaded into PEG-PLA nanofiber mats to realize multi-drug delivery. The release behaviors of both the drugs from the same fiber mats were ascribed to their solubility properties and distribution status in the fibers. Due to its high hydrophilicity, DOX was easy to diffuse out from the fibers, and its release rate was always faster than that of hydrophobic PTX. Moreover, the release rate of PTX was accelerated by DOX's release from the same drug-loaded fibers. In vitro cytotoxicity against rat Glioma C6 cells indicated that the dual drug combination showed a higher inhibition and apoptosis against C6 cells than a single drug-loaded system, which suggests the promise for multi-drug delivery on combination therapy.
Resumo:
Paclitaxel-loaded poly(ethylene glycol)-b-poly(L-lactide (LA)) (PEG-PLA) micelles were prepared by two methods. One is physical encapsulation of paclitaxel in micelles composed of a PEG-PLA block copolymer and the other is based on a PEG-PLA-paclitaxel conjugate, abbreviated as "conjugate micelles" Their physicochemical characteristics, e.g. critical micelle concentration (CMC), morphology, and micelle size distribution were then evaluated by means of fluorescence spectroscopy, scanning electron microscopy (SEM), and dynamic light scattering (DLS). The results show that the CMC of PEG-PLA-paclitaxel and PEG-PLA are 6.31 x 10(4) and 1.78 x 10(-3) g L-1, respectively. Both micelles assume a spherical shape with comparable diameters and have unimodal size distribution. Moreover, in vitro drug delivery behavior was studied by high performance liquid chromatography (HPLC). The antitumor activity of the paclitaxel-loaded micelles against human liver cancer H7402 cells was evaluated by 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) method.
Resumo:
A triblock poly(lactic acid)-b-poly(ethylene glycol)-b-poly(lactic acid) (PLA-PEG-PLA)/paclitaxel (PTX) conjugate was synthesized by the reaction of carboxyl-terminated copolymer PLA-PEG-PLA with PTX in the presence of dicyclohexylcarbodiimide and dimethylaminopyridine. Carboxyl-terminated copolymer PLA-PEG-PLA was prepared by the reaction of the hydroxyl end groups in copolymer PLA-PEG-PLA with succinic anhydride. Its structure was confirmed by NMR and gel permeation chromatography. The PLA-PEG-PLA/PTX conjugates could self-assemble into micelles in aqueous solutions with a low critical micelle concentration. Dynamic light scattering and environmental scanning electron microscopy analyses of the PLA-PEG-PLA/PTX micelles revealed their spherical structure and size of 220 nm. The antitumor activity of the conjugate against woman Hela cancer cells, evaluated by the 3-(4,5-dimethylthiazol2-yl)-2,5-diphenyl tetrazolium bromide method, showed that the conjugates had an antitumor activity similar to that of pure PTX. The obtained PLA-PEG-PLA/PTX conjugates are expected to be used in clinical practice.
Resumo:
A paclitaxel/MPEG-PLA block copolymer conjugate was prepared in three steps: (1) hydroxyl-terminated diblock copolymer of monomethoxy-poly(ethylene glycol)-b-poly(lactide) (MPEG-PLA) was synthesized by ring-opening polymerization of L-lactide using MPEG as a maroinitiator, (2) it was converted to carboxyl-terminated MPEG-PLA by reacting with mono-i-butyl ester of diglycolic acid and subsequent deprotecting the t-butyl group with TFA; (3) the latter was reacted with paclitaxel in the presence of dicyclohexylcarbodiimide and dimethylaminopyridine. Structures of the polymers synthesized were confirmed by H-1 NMR, and their molecular weights were determined by gel permeation chromatography. The antitumor activity of the conjugate against human liver cancer H7402 cells was evaluated by MTT method. The results showed that paclitaxel can be released from the conjugate without losing cytotoxicity.
Resumo:
生物降解脂肪族聚酷如聚乙交醋(PGA)、聚丙交醋(PLA)、聚。一己内酷(PCL)以及它们的共聚物由于具有良好的生物相容性和生物降解性而在外科手术缝合线、组织工程、药物控制释放、骨固定等领域得到很多应用。但是,它们自身缺乏功能基团,亲水性差,因而在应用上受到很大限制。因此,含有功能侧基生物降解聚合物的制备在过去十年中受到大家极大的关注。功能基团的引入对于调节聚合物的性能如:亲水性、生物降解性和药物的渗透性等非常重要。需要特别指出的是,功能基团的引入为把药物和其它生物活性物质与聚合物结合进而扩大聚合物的应用范围提供了机会。本文合成了几个功能化单体并且通过共聚的方法制备了几种新型的两亲性功能化聚合物。这些改性后的聚合物可以通过化学键接上药物或者其它生物活性物质,有望作为靶向控释药物载体和智能化的组织工程支架材料。具体的研究结果如下:1.以2,2-二羟甲基丙酸节酷为功能单体,通过两步法成功合成了一系列新的带功能基团的聚酷酞胺,并通过1H NMR和FTIR对聚合物的化学结构进行了表征,DSC结果表明所合成的聚酯酰胺的Tm和Tg分别在150℃和0℃左右;2.合成了功能化的环状单体(35)-3-[(苄氧羰基)乙基」吗啉-2,5-二酮(BEMD),并以PEG作为引发剂,Sn(Oct)2作为催化剂,通过L一LA和BEMD的开环共聚合得到共聚物PLGBG-PEG-PLGBG;随后用10%铭碳催化氢化得到带有侧梭基的两亲性嵌段共聚物PLGG-PEG-PLGG和其它两亲性嵌段共聚物一样,PLGG-PEG-PLGG在水溶液中能够自组装成胶束,用花作为荧光探针,通过荧光光谱法研究了其形成胶束的过程并测定了它们的临界胶束浓度,发现在总的分子量大致相当的情况下,PLGG-PEG4600-PLGG比PLGG-PEG2000-PLGG有较高的临界胶束浓度;场发射电子显微镜表征结果显示胶束具有均一的球形特征,动态光散射结果表明该胶束具有较窄的单峰粒径分布;蛋白酶K溶液中的降解研究表明带有侧梭基的PLGG-PEG-PLGG比PLA具有更快的降解速率;人胚关节软骨细胞培养结果表明所合成的聚合物PLGG-PEG-PLGG显示出较好的细胞相容性。3.在缩合剂DCC和催化剂DMAP存在下,带有侧梭基的两亲性嵌段共聚物PLGOPEG-PLGG和紫杉醇发生缩合反应得到两亲性嵌段共聚物一紫杉醇键合药P(LGG-paclitaxel)-PEG-P(LGG-paclitaxel)。它具有两亲性嵌段共聚物的性质,能够自组装成胶束,场发射电子显微镜表征结果表明胶束具有均一的球形特征,动态光散射结果表明该胶束具有较窄的粒径分布,平均粒径为119.4nm。该胶束的药物释放具有pH敏感性,酸性环境中比生理环境中(pH=7.4)具有较快的释放速率。P(LGG-Paclitaxel)-PEG-P(LGG-paclitaxel)胶束的壳层由良好亲水性的PEG组成,避免了胶束纳米粒子在血液循环中被人体网状内皮系统吞噬,保证有充足的时间通过EPR效应在肿瘤部位聚集,进而通过细胞内吞进入细胞并在细胞内的酸性环境中释放药物,进一步的研究工作有待深入进行。4.合成了功能化的环状碳酸酷单体MBC,以MPEG作为引发剂,ZnEt2作为催化剂,LLA和MBC发生开环共聚合,以较高的转化率,得到高分子量共聚物MPEG-b-P(LA-co-MBC)。13C NMR表明LLA和确c发生了无规共聚合;DSC征结果表明MPEG-b-P(LA-co-MBC)为无定型态聚合物,Tg在20-50℃之间,随着MBc含量的增加而降低;MPEG-b-P(LA-co-MBC)脱保护后得到带侧梭基的MPEG-b-P(LA-co-MCC),它的Tg明显提高,可能是聚合物侧梭基之间强的氢键作用力以及梭基对水解反应的催化作用造成的;脱保护前后的共聚物在蛋白酶K溶液中的降解研究表明,MPEG-b-P(LA-co-MCC)的降解速率大于MPEG-b-P(LA-co-MBC)的降解速率;人胚关节软骨细胞培养结果表明,所合成的MPEG-b-P(LA-co-MCC)是一种具有良好生物相容性的新型生物降解材料。5.利用本实验室开发的一种新型有机氨锯引发剂Sr-PO在温和的条件下通过顺序加料聚合的方法合成了新的嵌段共聚物PCL-b-PMBC。WAXD结果表明 PCL-b-PMBc中PCL的衍射峰均可观察到,只是衍射峰的强度随着PMBC含量的增加而减弱。DSC结果表明PCL-b-PMBC中PCL的Tm在57到52℃之间,并且随着PMBC含量的增加而降低。PCL-b-PMBC的玻璃化转变在-41.6 到-23.3℃之间,随着PMBC含量的增加而增加,这表明PMBC和PCL之间 有着强的相互作用,尽管两段不是完全相容的。PCL-b-PMBC的侧节醋在10%把碳催化下氢化还原为带侧梭基的PCL-b-PMCC后,衍射峰和结晶焙大大降低,说明侧梭基的存在使得分子链间有着强的氢键相互作用而不利于结晶。由以上分析可知,PCL-b-PMCC侧梭基的存在将会使共聚物的降解速度大大提高,而且因为功能梭基的存在可以使共聚物通过化学键连接上药物、短肤、寡糖或者其它生物活性物质,从而扩大该聚合物在生物医学领域的应用范围。
Resumo:
Docetaxel (DX) is one of the most effective antineoplastic drugs. Its current clinical administration is limited because of its hydrophobicity and Serious side effects. A polymer/DX conjugate is designed and successfully prepared to solve these problems. It is monomethoxy-poly(ethylene glycol)-block-poly(L-lactide)/DX (MPEG-PLLA/DX) It was synthesized by reacting DX with carboxyl-terminated copolymer MPEG-PLLA, which was prepared by reacting succinic anhydride with hydroxyl-terminated copolymer monomethoxy-poly(ethylene glycol)-block-poly (L-lactide) (MPEG-PLLA). Its structure and molecular weight was confirmed by H-1 NMR and GPC. The MPEG-PLLA/DX micelles in aqueous solution were prepared Using a SO]vent displacement method and characterized by dynamic light scattering for size and size distribution, and by transmission electron microscopy for surface morphology. Its antitumor activity against HeLa cancer cells evaluated by MTT assay showed that it had a similar antitumor activity to Pure D at the same drug content.
Resumo:
The coupling of drugs to macromolecular carriers received an important impetus from Ringsdorf's notion of polymer-drug conjugates. Several water-soluble polymers, poly(ethylene glycol), poly[N-(2-hydroxypropyl) methacrylamidel, poly(L-glutamic acid) and dextran, are studied intensively and have been utilized successfully in clinical research. The promising results arising from clinical trials with polymer-drug conjugates (e.g., paclitaxel, doxorubicin, camptothecins) have provided a firm foundation for other synthetic polymers, especially biodegradable polymers, used as drug delivery vehicles. This review discusses biodegradable polymeric micelles as an alternative drug-conjugate system. Particular focus is on A-B or B-A-B type biodegradable amphiphilic block copolymer such as polylactide, morpholine-2,5-dione derivatives and cyclic carbonates, which can form a core-shell micellar structure, with the hydrophobic drug-binding segment forming the hydrophobic core and the hydrophilic segment as a hydrated outer shell. Polymeric micelles can be designed to avoid uptake by cells of reticuloendothelial system and thus enhance their blood lifetime via the enhanced permeability and retention effect.