PVA降解菌的产酶条件及特性研究

目前对PVA生物降解研究重点逐渐转移到对PVA降解菌和PVA降解酶的研究开发上，随着对PVA降解高效新菌株的不断发现和PVA降解酶作用机理和分泌机制的深入了解，利用高效微生物或酶法治理PVA这类高聚物的污染将具有较大的应用潜力。本论文研究工作正是基于这种客观条件下进行的，对本实验室前期分离的PVA降解菌株P1、共生菌B1+B2、Pa、Pb为研究对象，重点研究了菌株P1和共生菌B1+B2的产酶条件和产酶特性，验证找出了影响菌株P1产酶的生长因子，论证了菌株B1+B2的产酶特性，优化得出了菌株B1+B2的最佳产酶条件；然后对共生菌B1+B2的PVA降解酶的稳定性进行了研究；最后研究了最佳组合菌的产酶特性和最佳产酶条件。主要研究结果如下： 1 通过对菌株P1产酶因子的研究，找出了核黄素是菌株P1产酶的必须因子，在以淀粉为碳源时，核黄素只是产酶的必须因子，而不是菌体生长的必须因子；在以PVA为碳源时，核黄素既是生长的必须因子，也是产酶的必须因子，是菌株P1的生长因子。 2 对共生菌B1+B2的产酶条件和产酶特性进行了研究，并通过正交实验找出了影响菌株产酶的主要条件和菌株产酶的最佳条件。 3 对共生菌PVA降解酶的稳定性进行了研究，确定了影响酶稳定性的主要理化条件。 4 通过对菌株降解性能的比较，确定菌株Pa、Pb、共生菌、P1的作为组合菌的组成菌，然后通过复配实验确定出菌株的最佳组合为菌株Pa、P1、共生菌，最后通过正交实验确定最佳组合菌的最佳配比。 5对影响组合菌产酶的因素进行了研究，通过正交实验确定了影响组合菌产酶的主要因素和最佳产酶条件。 本文通过对PVA降解菌株产酶条件和特性的研究，旨在为PVA降解菌生产酶制剂及进一步优化PVA降解菌在PVA废水治理中的应用提供理论和应用依据。 Now the PVA-degrading bacteria and polyvinyl alcohol-degrading enzyme are the key studies on the PVA biological degradation. It has great application potential using special bacteria and enzyme to treat pollution of PVA, with some high efficient Strain and enzyme were found. The study of this paper was based on that objective condition. The stain P1, symbiotic bacteria B1+B2, stain Pa and strain Pb were studied .The conditions of enzyme production and enzyme production characteristic of stain P1, symbiotic bacteria B1+B2 were our key study, we tested and verified the growth factor which effected enzyme production of strain P1, demonstrated enzyme production characteristic of symbiotic bacteria B1+B2, optimized and obtained the optimum conditions of enzyme production; then we studied the stability of polyvinyl alcohol-degrading enzyme of strain B1+B2; last the enzyme characteristic and the optimum conditions of alcohol-degrading enzyme production of optimum combination stains were studied. The main study results are below: 1. Through the study of enzyme production factor we found that lactoflavin is the necessary factor in strain P1 enzyme production. When we used starch to be carbon energy, lactoflavin is only the necessary factor of enzyme production, but not growth factor. When we used PVA to be carbon energy, lactoflavin was not only the necessary growth factor ,but also the necessary enzyme production factor.So it was the growth factor of strain P1 2. The enzyme production conditions and enzyme production characteristic of symbiotic bacteria B1+B2 were studied. Through the orthogonal experimental design, the main conditions which effected the enzyme production and the optimum conditions of enzyme production were obtained 3. Through the study of the stability of polyvinyl alcohol-degrading enzyme, the main physical and chemical conditions which effected the enzyme stability were 4. The stain P1,symbiotic bacteria B1+B2, stain Pa and strain Pb were selected to form combination bacteria. The stain P1,symbiotic bacteria B1+B2,stain Pa were the optimum combination through duplication experiment. Then the optimum ratio was obtained through orthogonal experiment. 5. Studied the factors which effected the polyvinyl alcohol-degrading enzyme activity, then through orthogonal experiment, the main factors and condition of enzyme production which effected the combination bacteria were achieved. The result of the study was valuable for the ferment of the PVA-degrading enzyme and the optimization of the PVA-degrading performance in the PVA wastewater.

电子辐照PVA/CMC共混水凝胶的成胶研究

本试验利用电子辐照PVA/CMC共混水凝胶,通过外观透明度、凝胶分数、溶胀度和红外光谱分析,研究了样品中结构的变化与外观透明度、凝胶分数和溶胀度的关系,以及辐照剂量对样品中结构和性能的影响。结果表明,不同比例的PVA与相同比例的CMC组成的共混水凝胶,经电子辐照后呈现不同的宏观特性。辐照样品萃取后得到的凝胶比萃取前的混合凝胶拥有更强的吸水性,表明辐照PVA/CMC共混凝胶形成了网状结构凝胶。几种竞争反应导致不同辐照剂量下混合凝胶中凝胶含量随PVA含量的变化变得复杂。辐照后样品的红外光谱分析显示,辐照使凝胶中部分仲醇中C上链接的H原子被取代而转变为叔醇,从而产生交联。

Preparation and antibacterial effects of PVA-PVP hydrogels containing silver nanoparticles

The poly(vinyl alcohol)/ poly(N-vinyl pyrrolidone) (PVA-PVP) hydrogels containing silver nanoparticles were prepared by repeated freezing-thawing treatment. The silver content in the solid composition was in the range of 0.1-1.0 wt %, the silver particle size was from 20 to 100 nm, and the weight ratio of PVA to PVP was 70 : 30. The influence of silver nanoparticles on the properties of PVA-PVP matrix was investigated by differential scanning calorimeter, infrared spectroscopy and UV-vis spectroscopy, using PVA-PVP films containing silver particles as a model. The morphology of freeze-dried PVA-PVP hydrogel matrix and dispersion of the silver nanoparticles in the matrix was examined by scanning electron microscopy. It was found that a three-dimensional structure was formed during the process of freezing-thawing treatment and no serious aggregation of the silver nanoparticles occurred. Water absorption properties, release of silver ions from the hydrogels and the antibacterial effects of the hydrogels against Escherichia coli and Staphylococcus aureus were examined too. It was proved that the nanosilver-containing hydrogels had an excellent antibacterial ability.

Synthesis of AgCl/PAN composite nanofibres using an electrospinning method

A new route based on electrospinning is designed for the preparation of silver chloride/polyacrylonitrile (AgCl/PAN) composite nanofibres. The AgCl nanoparticles uniform in size, were dispersed on the surfaces of the composite nanofibres. Transmission electron microscopy (TEM) images gave direct evidence of the structure. X-ray photoelectron spectroscopy (XPS) and x-ray diffraction (XRD) confirmed the presence of AgCl crystals.

A simple and effective route for the preparation of poly(vinylalcohol) (PVA) nanofibers containing gold nanoparticles by electrospinning method

Poly(vinyl alcohol) (PVA) nanofibers containing gold nanoparticles have been simply obtained by electrospinning a solution containing gold nanoparticles without the additional step of introducing other stabilizing agents. The optical property of gold nanoparticles in PVA aqueous solution was observed by UV-visible absorption spectra. Morphology of the Au/PVA nanofibers and distribution of the gold nanoparticles were characterized by transmission electron. microscopy (TEM). The structure transformation was characterized from PVA to PVA/Au composite by Fourier transform infrared spectroscopy (FTIR).

Polymeric pH indicators immobilized PVA membranes for optical sensors of high basicity based on a kinetic process

Two kinds of polymeric pH indicators PPF (phenolphthalein-formaldehyde product) and CPF (o-cresolphthalein-formaldehyde product) immobilized cross-linked poly(vinyl alcohol) membranes (PPF-PVA and CPF-PVA) for optical intermittent determination of high basicity ([OH-] = 1-8 M) based on a kinetic process were developed. In our previous work, we had demonstrated that PPF-PVA and CPF-PVA could perform the determination of high pH values from pH 10.0 to 14.0. Here the discoloring kinetic behaviors of PPF-PVA and CPF-PVA were compared with those of free phenolphthalein, o-cresolphthalein and thymolphthalein. Experimental results and theoretical analysis indicated that the response behaviors of the optodes' membranes in concentrated NaOH solutions were diffusion-independent and still complied with the pseudo-first-order kinetics. In addition, two data analysis methods for determination were presented. One was directly based on the reduced absorbance: the other was based on the discoloring kinetic constant. It was found that the latter could perform a rapid (60 s) and reliable (relative standard deviation: 2.6%) determination for high basicity.

Crystallization and melting behaviors of PPC-BS/PVA blends

The isothermal crystallization and melting behaviors of poly(propylene carbonate) end-capped with benzenesulfonyl/poly (vinyl alcohol) (PPC-BS/PVA) blends over rich PVA composition range were first investigated by differential scanning calorimetry (DSC). PPS-BS/PVA interaction parameter, chi(12), calculated from equilibrium melting temperature depression was -0.44, revealing miscibility of PPC-BS with PVA in the melt and favorable interactions. The temperature dependence of crystallization rate constant at initial crystallization stage was analyzed using the modified Lauritzen-Hoffman expression. The chain width, a(0), the thickness of a monomolecular layer, b(0), the fold and lateral surface-free energies, sigma(e) and sigma, and the work of chain folding, q, for neat PVA were first reckoned to be 4.50 Angstrom, 4.78 Angstrom, 76.0 erg.cm(-2), and 4.70 kcal.mol(-1), respectively. The values of sigma(e) and q for PVA in PPC-BS/PVA blends exhibited a maximum in the neighborhood of 10/90 PPC-BS/PV, respectively.

Characterization of Full-Biodegradable Starch-PVA-Polyester Film

IntroductionConventional polymers such as polyethyleneand polypropylene persistfor many years after landdisposal.Furthermore,plastics are often soiled byfood and other biological substances,making phys-ical recycling of those materials impractical andgenerally undesirable. In contrast,biodegradablepolymers disposed in bioactive environment are de-graded by the enzymatic action of microorganismssuch as bacteria,fungi,and algae.The worldwideconsumption of biodegradable polymers increasedfrom1.4×107kg in ...

Studies on Mechanical Properties of Full-Biodegradable Starch-PVA-Polyester Films

A kind of full-biodegradable film material is discussed in this article. The film material is composed of starch, PVA, degradable polyesters(PHB, PHB-V, PCL) with built plasticizer, a cross-linking reinforcing agent and a wet strengthening agent. It contains a high percentage of starch, costs cheap and is excellent in weather fastness, temperature resistance and waterproof and it could be completely biodegraded. The present paper deals mainly with a new technical route using a new type of electromagnetic dynamic blow molding extruder and some effects on mechanical properties of the system.

Chlorohydrin water swellable rubber compatibilized by an amphiphilic craft copolymer. I. Synthesis and characterization of compatibilizer PVA-g-PBA

The graft copolymerization of butyl acrylate onto poly(vinyl alcohol) with eerie ammonium nitrate as redox initiator in a aqueous medium has been investigated. The formation of graft copolymer was confirmed by means of IR, scanning electron microscopy (SEM), and wide-angle X-ray diffraction (WAXD). The percentage of mononer conversion and percentage of grafting varied with concentrations of initiator, nitric acid, monomer, macromolecular backbone (X-n = 1750, M = 80 000), reaction temperature and reaction time. Some inorganic salts and organic solvents have a great influence upon grafting. The reaction mechanism has been explored, and rate equations for the reaction are established. (C) 2000 John Wiley & Sons, Inc.

乙基罗丹明B－磷钼杂多酸－PVA体系超高灵敏显色反应的研究

本文详细研究了乙基罗丹明Ｂ－磷钼杂多酸－ＰＶＡ超高灵敏显色反应，提出了高灵敏测量痕量磷的新的分光光度法。缔合物的最大吸收波长位于５８４ｎｍ处，其表观摩尔吸光系数为１．３×１０￣６Ｌ·ｍｏｌ￣（－１）·ｃｍ￣（－１）。并研究了缔合物的组成和红外光谱。本法直接用于钢样及试剂中痕量磷的测定，获得满意的结果，检测下限达６×１０￣（－７）％。

PREFERENTIAL SORPTION OF MODIFIED PVA MEMBRANE IN PERVAPORATION

The swelling processes of an annealed poly (vinyl alcohol) membrane, a NaOH-crosslinked poly (vinyl alcohol) membrane, a poly (vinyl alcohol)-N,N'-methylene bisacrylamide irradiation-crosslinked membrane and a poly (vinyl alcohol)/poly(AMcoAANa) blend membrane were investigated. Water was preferentially sorbed by all four membranes. The selective sorption factor alpha(s) and the selective diffusion factor alpha(d) were defined, and were used to characterize the effects of sorption and diffusion on selectivity. The results have shown that preferential sorption has a marked effect on selectivity. The mean diffusion coefficients and pervaporation properties of the four membranes are also discussed.

PVA/PVP共混体系的非等温结晶动力学

用Mandelkern和Ziabicki理论方法求得PVA及PVA/PVP共混物结晶动力学参数Z_C和动力学结晶能力G_C值,并进行了讨论。得到的Avrami指数n不随冷却速度变化,但随非晶组分PVP的加入有所减小,加入量达百分之四十以后n由3降到2;G_C值则随非晶组分的加入而增大,当PVP加入量大于百分之三十时,G_C值不再发生明显变化。同时实验表明该高聚物及其共混体系不适合于Ozawa非等温结晶动力学方程。