气相贝克曼重排新型固体酸催化剂研究

己内酰胺是一种重要的有机化工原料。采用环己酮肟的气相Beckmann重排的方法制己内酰胺可以解决传统的液相工艺中存在的副产硫酸胺、腐蚀设备和污染环境等问题。本研究的目的是开发出适合环己酮肟的气相Beckmann重排的固体酸催化新工艺。 首先，本工作用同位素标记的方法研究了Beckmann重排在固体酸B2O3/γ-Al2O3和TS-1上的反应机理。同位素标记后的产品采用质谱测量。通过与H218O交换氧，发现环己酮肟与H218O的交换在B2O3/γ-Al2O3和TS-1只能进行到一定程度，这暗示固体酸上腈中间体的解离不如经典的机理完全。提出了解离度(α)的概念，其定义为解离了中间体腈与总中间体腈之比。通过拟合实验数据和同位素标记的产品的计算公式，获得了B2O3/γ-Al2O3和TS-1上α 值分别为0.199和0.806的结果。 其次，采用对氧化铝表面合适氟化的方法，对氟化的氧化铝的性能进行研究。发现氧化铝表面氟化可以改善Beckmann重排的性能。氧化铝表面氟化可以消除其表面碱性位，说明了催化剂表面碱性位不利于Beckmann重排。而完全氟化的氧化铝的选择性不如某些固体酸如负载B2O3和Silicalite-1，暗示着表面酸强度也影响催化剂的选择性。同时，我们对适合气相Beckmann重排的催化剂进行了简单的筛选。发现一种稀土焦磷酸盐有可能是适合此反应的催化剂。 再次，研究了稀土焦磷酸盐催化剂上气相Beckmann重排。通过对一些稀土磷酸进行XRD,FT-IR,NH3-TPD和水接触角等表征，发现这类催化剂上表面的弱酸位以及合适的表面疏水是它们具有较好性能的原因。 再次，对焦磷酸铈催化剂的合成以及反应氛围进行了优化。发现优化的反应氛围为催化剂在pH在3~4时沉淀，在500~550度焙烧，在~350度反应，载气~80ml/min，空速在0.43h-1时反应，能保持转化率在98％以上，选择性在70％以上，8小时不失活。 最后，采用P123作为模板剂合成了一种新型的中孔稀土磷酸盐，这种稀土磷酸盐具有无序的虫洞形结构。应用这种新型的中孔稀土磷酸盐于酚类甲醇氧烷基化获得了较好的结果。与不加表面活性剂的材料相比，这种中孔稀土磷酸盐在低温下具有更大的活性并且其选择性不受损失。认为这种中孔的形态对催化性能具有好的影响。

几种稀土氟化物和氧化物纳米发光材料的制备、性能及其应用探索研究

目前，纳米材料已经应用于很多医药和生物领域，诸如临床诊断、药物传送、体内体外荧光标记等。稀土离子掺杂的纳米材料因其独特的发光性质已被认为是有前景的生物荧光标记，二氧化硅作为环境友好发光材料也受到越来越多的重视。本论文合成稀土离子掺杂的下转换和上转换发光纳米材料，并进行表面功能化，使之连接生物药物小分子，以期作为荧光标记。同时采用不同方法制备不同大小的二氧化硅球，并研究其发光性质。 采用多醇法成功地制备出结晶程度高的CeF3:Tb3+纳米粒子。氧化硅和胺基硅烷包覆使纳米粒子具有胺基功能化，然后通过SOCl2成功地活化生物素使之连接到纳米粒子上并随之与亲合素键合。胺基功能化的CeF3:Tb3+ 纳米粒子发光产生严重的猝灭，而生物分子与纳米粒子结合后发光得到很大程度上的恢复。生物功能化的CeF3:Tb3+ 纳米粒子能很好地分散在水中，为这些CeF3:Tb3+ 纳米粒子作为生物荧光探针奠定了基础。同时以P123为结构导向剂，介孔氧化硅成功地包覆CeF3:Tb3+ 纳米粒子。介孔氧化硅层存在部分有序的六方介孔体系和部分微孔结构，该复合物保持绿色荧光性质并具有相当大的孔容和大的表面积。布洛芬能载入复合物的孔道中，在24 h内释放完全。因此，这类复合物可以在靶向的药物传送体系中具有潜在的应用价值。 利用多醇法制备出NaYF4:Yb3+, Er3+ 纳米粒子。NaYF4:Yb3+, Er3+ 纳米粒子进行胺基功能化，并通过氧化寡糖链成功地活化亲合素，使之连接到胺基功能化的纳米粒子上。生物功能化的 NaYF4:Yb3+, Er3+纳米粒子仍保持较好的上转换发光性质，可以作为生物体系的荧光探针。另外用 P123作为结构导向剂和助表面活性剂PVP 或 TMB 成功地使NaYF4:Yb3+, Er3+ 纳米粒子包覆介孔氧化硅。外层氧化硅层有介孔结构。该复合物保持红色荧光性质，并具有大的孔容、表面积。布洛芬能载入复合物的孔道中，在12 h内完全释放。 通过高温溶剂法合成出YVO4:Eu3+ 纳米粒子。粒子结晶程度高，为椭球形状，长轴为80 nm，短轴为43 nm。YVO4:Eu3+ 纳米粒子的荧光发射跃迁主要源于5D0能级。FT-IR 谱和 XPS 谱表明纳米粒子表面的配体为油酸和油胺分子。Eu3+ (5D0 level) 寿命因表面有机配体的存在比体材料的寿命短。 成功地制备出不同大小的纳米至亚微米尺度且具有发光性能的单分散二氧化硅球，其尺寸随胺基浓度的增加而增大。烧结后粒子仍保持单分散性，但其尺寸缩小。烧结后的二氧化硅球含有C杂质。亚微米尺度的二氧化硅球的发射带最大值随氨丙基三乙氧基硅烷（APTES）浓度的增加而红移，但是纳米尺度的二氧化硅球的发射带最大值红移更大。单分散二氧化硅球发光原因归于二氧化硅结构中存在的碳和氧缺陷。

介孔材料的合成、性能以及应用

自从1992年美孚公司成功地研究开发出介孔材料M41S后，由于其具有不同寻常的结构特点-比较均一的孔径（2-50nm）而且连续可调、较高的比表面积、较大的孔体积、孔的长程有序性以及较好的热稳定性等，具有巨大的潜在应用价值，立即引起了全世界的关注。目前，世界各国的研究主要集中在研究介孔材料的特性、形成机理、介孔材料形貌、结构和孔径的控制、新一代介孔材料的研究开发、介孔材料的改性以及介孔材料的应用等方面。本论文主要在介孔材料的合成、性能以及应用方面开展了研究。选用头尾都是憎水的三嵌段共聚物为模板制备出具有三维无序虫状孔道的介孔材料和以有孔氧化铝膜为模板制备了形态可控的介孔材料，即具有介孔结构高有序纳米管。采用一步法合成了介孔Ag／silica和Y2O3：Eu／silica材料，采用基底受限法制备了银和Y2O3：Eu纳米粒子，同时研究了Ag／silic。作为催化剂时催化性能。（1）在酸性条件下，利用头尾都是憎水的三嵌段共聚物SBS为模板、TEOS为硅源，分别选用丁酮和甲苯作选择性溶剂，通过微乳技术制备出具有三维无序虫状孔道的介孔硅材料。我们通过在SBS胶束溶液中加入TEOS／水的油水混合乳液使SBS胶束与TEOS／水混合乳液之间形成一个界面，从而使TEOS这个界面上完全水解而且生成的小分子硅齐聚物包附在SBS胶束的外表面。经过加热则使TEOS凝聚同时形成具有介孔结构的SBS／硅材料。最后，通过锻烧以移除SBS，从而得到介孔硅材料。在选用甲苯作溶剂，研究发现随着SBS用量的增加或形成胶束温度的升高比表面积、孔体积和孔径等都相应减小。因此，这两个参数可以方便地调节介孔材料的孔径、表面积和孔体积等，进而更好地控制介孔材料的性能。所制备介孔材料的壁厚与SBS用量和形成胶束温度无关，且均超过IOnm，因而材料具有较好的热稳定性，这有利于其进一步在催化剂、吸附和分离等领域应用。（2）以有孔的氧化铝膜为模板制备了具有介孔结构高有序纳米管，即在加热条件下将P123一TEOS薄膜通过毛细力引入有孔的氧化铝膜孔内，同时根据优先润湿机理使P123一TEOS组分润湿氧化铝孔的内壁并同时伴随嵌段共聚物胶束的重排、TEOS组分的凝聚收缩，随后通过烧结手段除去嵌段共聚物、通过溶解手段除去氧化铝模板，这样便在硅基底上得到了形态可控的介孔材料即有序排列的具有介孔结构的纳米管。在一定时间范围内，退火时间对纳米管的形成和生长高度有一定的影响。纳米管垂直于硅基底且纳米管套内的介孔以六方形式排列在整个纳米管套同时介孔孔道相互平行，所制备的纳米管能保持受限在氧化铝模板时的尺寸而且稳定地粘附在硅基底上。（3）在酸性条件下，采用一步法即在模板剂（P123）形成胶束之后，加入硝酸银或氧化铺和氧化忆混合物同P123胶束形成新的复合体，随后加入硅源（TEOS）以包附在复合体的外表面，从而形成具有介孔相的复合物，通过热处理我们分别制备了高有序的具有二维六方结构的介孔Ag／silica和Y203：Eu／silica材料，其中金属银或YZO3：Eu纳米粒子分散在有序的介孔孔道内。二者的比表面积、孔体积和孔径分别为786m2／g、1．22cm3／g、6．Znm和791m2／g、0．95cm3／g、3．snm。另外，我们采用基底受限法，利用旋涂法分别使介孔Ag／silica和YZO3：E记silica材料分散在硅基底上，通过溶解法除去硅墙后便得到了没有聚集的且具有狭窄粒径分布的金属银（2．5-5．snm）和姚03：Eu（1．5-3．onm）纳米粒子。原子力显微镜（AFM）证实所得到的纳米粒子呈现良好的分散状态，具有狭窄的粒径分布而且粒子尺寸都小于其介孔材料孔径。（4）分别用一步法制备的介孔Ag／SBA－－15材料和金属银作为甲醇氧化制备甲醛反应的催化剂，利用甲醇转化率表示催化剂活性、甲醛和二氧化碳产率表示催化剂选择性来研究二者催化性能。由于具有高的比表面积（786扩／g）、较大的孔体积（1．22cm3／g）、较大的孔径（6．2nm）、狭窄的孔径分布和有序的介孔孔洞等特性，在反应温度473K-723K范围内，同本体银作催化剂相比尽管银仅占体系总重量的0．94wt％，介孔Ag／silic。材料却显示出极高的催化活性和催化选择性。

Synthesis and luminescence properties of hybrid organic-inorganic transparent titania thin film activated by in-situ formed lanthanide complexes

Stable transparent titania thin films were fabricated at room temperature by combining thenoyltrifluoroacetone (TTFA)-modified titanium precursors with amphiphilic triblock poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO, P123) copolymers. The obtained transparent titania thin films were systematically investigated by IR spectroscopy, PL emission and excitation spectroscopy and transmission electron microscopy. IR spectroscopy indicates that TTFA coordinates the titanium center during the process of hydrolysis and condensation. Luminescence spectroscopy confirms the in-situ formation of lanthanide complexes in the transparent titania thin film.

Blue-light emission of mesoporous SBA-15 covalently bonded with carbazole chromophore

Much attention has been paid to carbazole derivatives for their potential applications as optical materials. For the first time, the blue-light-emitting carbazole chromophore has been covalently bonded to the ordered mesoporous SBA-15 (The resultant hybrid mesoporous materials are denoted as carbazole-SBA-15) by co-condensation of tetraethoxysilane (TEOS) and prepared compound 3-[N-3-(triethoxyilyl)propyl]ureyl-9-ethyl-carbazole (denoted as carbazole-Si) in the presence of Pluronic P123 surfactant. The results of H-1 NMR and Fourier transform infrared (FTIR) reveal that carbazole-Si has been successfully synthesized.

Synthesis, Spectroscopic Properties, and Stabilities of Ternary Europium Complex in SBA-15 and Periodic Mesoporous Organosilica: A Comparative Study

Ternary europium complex Eu(tta)(3)phen was covalently bonded with the general mesoporous. material SBA-15 and SBA-15-type of periodic mesoporous organosilica (PMO) material via impregnation of Eu(tta)(3)center dot 2H(2)O into phen-S15 and phen-PMO, respectively, through a ligand exchange reaction. The parent materials of phen-S15 and phen-PMO were synthesized by co-condensation of tetraethylorthosilicate (TEOS) or 1,2-bis(triethoxysilyl)ethane (BTESE) and the functionalized chelate ligand 5-(N,N-bis(3-triethoxysilyl)propyl)ureyl-1,10-phenanthroline (phen-Si) in the presence of Pluronic P123 surfactant as template, which were confirmed by SEM, XRD, FTIR, Si-29 CP-MAS NMR, and N-2 adsorption measurements.

Selective hydrogenation of citral catalyzed with palladium nanoparticles in CO2-in-water emulsion

CO2-in-Water (C/W) emulsion was formed by using a nonionic surfactant of poly (ethylene oxide)-poly (propylene oxide)-poly (ethylene oxide) (P123), and palladium nanoparticles were synthesized in situ in the present work. The catalytic performance of Pd nanoparticles in the C/W emulsion has been discussed for a selective hydrogenation of citral. Much higher activity with a turnover frequency (TOF) of 6313 h(-1) has been obtained in this unique C/W emulsion compared to that in the W/C microemulsion (TOF, 23 h(-1)), since the reaction was taking place not only in the surfactant shell but also on the inner surface of the CO2 core in the C/W emulsion. Moreover, citronellal was obtained with a higher selectivity for that it was extracted to a supercritical carbon dioxide (scCO(2)) phase as formed and thus its further hydrogenation was prohibited. The Pd nanoparticles could be recycled several times and still retain the same selectivity, but it showed a little aggregation leading to a slight decrease in conversion.

Synthesis and characterization of functionalized mesoporous silica by aerosol-assisted self-assembly

An efficient, productive, and low-cost aerosol-assisted self-assembly process has been developed to produce organically modified mesoporous silica particles via a direct co-condensation of silicate species and organosilicates that contain nonhydrolyzable functional groups in the presence of templating surfactant molecules. Different surfactants including cetyltrimethylammonium bromide, nonionic surfactant Brij-56, and triblock copolymer P123 have been used as the structure-directing agents. The organosilanes used in this study include tridecafluoro-1, 1,2,2-tetrahydrooctyltriethoxysilane, methytriethoxysilane, vinyltrimethoxysilane, and 3-(trimethoxysilyl)propyl methacrylate. X-ray diffraction and transmission electron microscopy studies indicate the formation of particles with various mesostructures. Fourier transform infrared and solid-state nuclear magnetic resonance spectra confirm the organic ligands are covalently bound to the surface of the silica framework. The porosity, pore size, and surface area of the particles were characterized using nitrogen adsorption and desorption measurements.

Acid catalyzed synthesis of ordered bifunctionalized mesoporous organosilicas with large pore

Thiol-functionalized mesoporous ethane-silicas with large pore were synthesized by co-condensation of 1,2-bis(trimethoxy-sily)ethane (BTME) with 3-mercaptopropyltrimethoxysilane (MPTMS) using nonionic oligomeric polymer C1H (OCH(2)-CH(2))(10)OH (Brij-76) or poly(alkylene oxide) block copolymer (P123) as surfactant in acidic medium. The results of powder X-ray diffraction (XRD), nitrogen gas adsorption, and transmission electron microscopy (TEM) show that the resultant materials have well-ordered hexagonal mesoscopic structure with uniform pore size distributions. (29)Si MAS NNR, (13)C CP-MAS NMR. FT-IR, and UV Raman spectroscopies confirm the attachment of thiol functionalities in the mesoporous ethane-sificas. The maximum content of the attached thiol group (-SH) in the mesoporous framework is 2.48mmol/g. The ordered mesoporous materials are efficient Hg(2+) adsorbents with almost every -SH site accessible to Hg(2+). In the presence of various kinds of heavy metal ions such as Hg(2+), Cd(2+), Zn(2+), Cu(2+) and Cr(3+), the materials synthesized using poly(alkylene oxide) block cooollxmier (Pluronic 123) g(2+), as surfactant show almost similar affinity to Hg(2+), Cd(2+), and Cr(3+), while the materials synthesized using ofigomeric polymer C(18)H(37)(OCH(2)CH(2))(10)OH (Brij-76) as surfactant exhibit high selectivity to Hg(2+). (C) 2004 Elsevier Inc. All rights reserved.

Structural relation properties of hydrothermally stable functionalized mesoporous organosilicas and catalysis

The surfactant assistant syntheses of sulfonic acid functionalized periodic mesoporous organosilicas with large pores are reported. A one-step condensation of tetramethoxysilane (TMOS) with 1,2-bis(trimethoxysilyi)ethane (BTME) and 3-mercaptopropyltrimethoxysilane (MPTMS) in highly acidic medium was performed in the presence of triblock copolymer Pluronic P123 and inorganic salt as additive. During the condensation process, thiol (-SH) group was in situ oxidized to sulfonic acid (-SO3H) by hydrogen peroxide (30 wt % H2O2). X-ray diffraction studies along with nitrogen and water sorption analyses reveal the formation of stable, highly hydrophobic, and well-ordered hexagonal mesoscopic structures in a wide range of -CH2CH2-concentrations in the mesoporous framework. The resultant materials were also investigated by Si-29 MAS and C-13 CP MAS NMR, thermogravimetric analyses, UV-Raman spectroscopy, and FT-IR spectroscopy. The role of the bridged organic group on the hydrothermal stability of the mesoporous materials was established, which revealed an enhancement in hydrothermal stability of the materials with incorporation of the bridged organic groups in the network. The catalytic performance of -SO3H functionalized mesoporous materials was investigated in the esterification of ethanol with acetic acid, and the results demonstrate that the ethane groups incorporated in the mesoporous framework have a positive influence on the catalytic behavior of the materials.