胜坨油田注聚后油藏动态模型及剩余油分布

The topic of Dynamic reservoir model and the distribution of remaining oil after polymer injection of Shengtuo oilfield is a front problem of "the 11th Five-Year Plan" scientific and technological disciplines of Sinopec Corporation. Reservoirs in study area is distributary channel sandstone. After 34 years of water-injection exploitation and 7 years of polymer injection pilot experiments, a highly complex heterogeneous dynamic evolution has been occurred in macro and micro parameters of reservoir model, together with its flow field. Therefore, it’s essential to construct completed reservoir dynamic model for a successfully prediction of the distribution of remaining oil. With a comprehensive application of multidisciplinary theory and technique, using a variety of data and information to maximize the use of computer technology, combining a static and dynamic, macro and micro and 1~4D integration, the research reveals main features, evolution and mechanism, types of geological disasters and their destructivity of reservoir flow field, the macro field, the micro field, the flow field and reservoir development hydrodynamic geological function in different development periods after a long term of polymer injection in Es2 in Shengtuo oilfield. The principle innovation achievements obtained are: 1. Established A, B, C, D four flow units in target formations, revealed the various features and distribution of flow units. 2. Stated environmental pollution and geological disasters induced during oilfield exploitation in study area, and also explained their formation mechanism, controlling factors, destructivity and approaches to disaster reduction. 3. Established dynamic evolution of the macro parameter model, micro-matrix field, pore network field, clay minerals field, seepage dynamic evolution model of six different exploitation stages in study area, also revealed reservoir flow evolution, the law of evolution mechanism after polymer injection. 4. Established macro and micro distribution model of remaining oil after three mining polymer injection during different water cut periods in study area, revealed the formation mechanism and distribution of remaining oil. 5. Established remaining oilforecasting model in study area, and forecasted the formation and distribution of remaining oil in the following six years. 6. It is proposed that reservoir fluid dynamic geological processes are major driving forces for the evolution of different water cut periods, reservoir macro field after the polymer injection and micro seepage field. 7. Established a dynamic reservoir model, proposed matching theory, methods and technology for the description of the remaining oil characterization and prediction, which can deepen the theory and techniques of continental rift basin development geology. Key words: Polymer reservoir; Geological disasters; Dynamic model; Residual oil forecast

Production and characterization of biodiesel from tung oil

The feasibility of biodiesel production from tung oil was investigated. The esterification reaction of the free fatty acids of tung oil was performed using Amberlyst-15. Optimal molar ratio of methanol to oil was determined to be 7.5:1, and Amberlyst-15 was 20.8wt% of oil by response surface methodology. Under these reaction conditions, the acid value of tung oil was reduced to 0.72mg KOH/g. In the range of the molar equivalents of methanol to oil under 5, the esterification was strongly affected by the amount of methanol but not the catalyst. When the molar ratio of methanol to oil was 4.1:1 and Amberlyst-15 was 29.8wt% of the oil, the acid value decreased to 0.85mg KOH/g. After the transesterification reaction of pretreated tung oil, the purity of tung biodiesel was 90.2wt%. The high viscosity of crude tung oil decreased to 9.8mm(2)/s at 40 degrees C. Because of the presence of eleostearic acid, which is a main component of tung oil, the oxidation stability as determined by the Rancimat method was very low, 0.5h, but the cold filter plugging point, -11 degrees C, was good. The distillation process did not improve the fatty acid methyl ester content and the viscosity.

Synthesis and Characterization of Hyperbranched Poly(ether amide)s with Thermoresponsive Property and Unexpected Strong Blue Photoluminescence

A facile and efficient strategy for the syntheses of novel hyperbranched poly(ether amide)s (HPEA) from multihydroxyl primary amines and (meth)acryloyl chloride has been developed. The chemical structures of the HPEAs were confirmed by IR and NMR spectra. Analyses of SEC (size exclusion chromatography) and viscosity characterizations revealed the highly branched structures of the polymers obtained. The resultant hyperbranched polymers contain abundant hydroxyl groups. The thermoresponsive property was obtained from in situ surface modification of abundant OH end groups with N-isopropylacrylamide (NIPAAm). The study oil temperature-dependent characteristics has revealed that NIPAAm-g-HPEA exhibits an adjustable lower critical solution temperature (LCST) of about 34-42 degrees C depending on the grafting degree. More interestingly, the work provided an interesting phenomenon where the HPEA backbones exhibited strong blue photoluminescence.