水位变化引起分层边坡滑坡的实验研究

通过对分层的边坡在水位变化时滑坡的模拟实验,考察了分层坡体的滑坡模式、坡体变形、破坏和渗流引起的滑坡,重点考察了水位涨落速度对坡体稳定的影响,以及坡面从产生张拉裂缝直到形成滑面的整个过程,并对这类滑坡中的现象给出了定性解释.最后用有限元对实验坡体进行了应力和位移的静力场分析,计算结果与实验结果基本一致.

Characterization of a Laser-Discrete Quenched Steel Substrate/Chromium System by Dissolving Coatings

A laser-discrete quenched steel (LDQS) substrate/as-deposited chromium (top high-contraction (HC) and underlying low-contraction (LC) chromium) system was investigated by dissolving coatings in order to reveal the mechanism that the service life of the coated parts is largely improved using the hybrid technique of laser pre-quenching plus chromium post-depositing. It was found that the surface characteristics of the substrate, LC and HC chromium layer can be simultaneously revealed owing to the dissolution edge effect of chromium coatings. Moreover, the periodical gradient morphologies of the LDQS substrate are clearly shown: the surfaces of laser transformation-hardened regions are rather smooth; a lot of fine micro-holes exist in the transition zones; there are many micro-dimples in the original substrate. Furthermore, the novel method of dissolving coatings with sharp interfaces may be used to reveal the structural features of a substrate/coating system, explore the effect of the substrate on the initial microstructure and morphologies of coatings, and check the quality of the coated-parts.

Local thermal fixing of a photorefractive LiNbO3 hologram by use of a CO2 laser

A real-time, in situ fixing method by use of heating with a CO2 laser beam is suggested for thermal fixing of a small local hologram in the bulk of a Fe:LiNbO3 photorefractive crystal. For heating up to 100 degrees C-200 degrees C a volume with a shape similar to that of the laser beam a heat-guiding technique is developed. On the basis of the heat-transfer equations, different heating modes with or without metal absorbers for heat guiding-obtained by use of a continuous or pulsed laser beam are analyzed. The optimal mode may be pulsed heating with absorbers. On this basis experiments have been designed and demonstrated. It is seen that the fixing process with CO2 laser beam is short compared with the process by use of an oven, and the fixing efficiency is quite high. (C) 1998 Optical Society of America.

毛乌素沙地油蒿与籽蒿种子萌发对光照的反应

油蒿(Artemisia ordosica)与籽蒿(Artemisia sphaerocephala)为毛乌素沙地的优势物种，广泛用于我国北方干旱、半干旱区的生态恢复。油蒿与籽蒿种子萌发对温度、水分等环境条件的反应已有较为明确的研究结果，但关于这两种蒿属植物种子萌发对光照反应的研究目前存在两种不同的结论，对飞播技术的改善造成一定影响。 影响油蒿与籽蒿种子萌发对光照反应的因素较多。如种源地、结实部位、种子颜色、种子保存方式与时间、实验条件、温度等。考虑种源地、种子保存时间与方式、结实部位及温度，从多方面系统研究油蒿与籽蒿种子萌发对光照的反应。结果表明当温度较低时(10:20C)，萌发率和萌发速率在黑暗条件下显著高于在光照条件下。采自榆林地区的种子萌发状况相对较差，萌发率和萌发速率在大多数情况下显著低于其他两地;各种源地上下部种子萌发率有一定差异，大多数结实部位为上部的种子最终萌发率和萌发速率高于下部的种子;保存几周的种子萌发率变化不大，但在温度较高和较低时，随着种子保存时间的延长，萌发率下降较快，而在适宜温度下种子萌发率变化不明显;种子保存方式的不同造成种子萌发情况的差异，但差异不明显;黑暗条件下比近似黑暗条件下的种子萌发率略低。上述因素对种子萌发均具有一定影响，但总体特征是种子萌发对光照的反应表现为强光抑制种子的萌发，黑暗促进种子萌发。当温度较高时(15:25C)，光照与黑暗条件下种子萌发率差异不大，但黑暗条件下种子的萌发速率显著高于光照条件下;当其它条件相同时，种子萌发率和萌发速率显著高于温度较低时(10:20C)。因而，适宜的温度和黑暗条件有利于油蒿与籽蒿种子的萌发。在飞播实践时应为种子创造一定的沙埋条件，创造有利于种子萌发的黑暗环境，促进种子的萌发，提高飞播工作的成效。

滇金丝猴的随机扩增多态DNA与遗传多样性分析

对6只笼养滇金丝猴(Rhinopithecus bieti)进行了随机扩增多态DNA(RAPD)及遗传多样性分析.用45个10bp随机短引物对每只滇金丝猴的基因组DNA进行了扩增,平均每个个体观察到的RAPD标记约为130个左右,单个引物获得的标记在1～7个之间.80%的RAPD标记表现为无多态的单型性.个体间的遗传距离为0.052,表明笼养滇金丝猴群体的遗传多样性很低.此研究结果与在蛋白多态研究中得到的一致.贫乏的遗传多样性一方面使目前处于濒危境地的滇金丝猴生存情况更加危险,同时其本身也可能是造成目前滇金丝猴濒危的原因之一.另外,通过成对的遗传距离分析,构建了这一群滇金丝猴的谱系关系图,提出了让遗传距离较远的个体间进行交配的笼养繁育计划.

雄性生殖道局部免疫

：雄性生殖道局部免疫在性传播疾病的防治、免疫不育的防治和免疫避孕方面都具有十分重要的作用。本文 结合作者的研究工作，介绍了雄性泌尿生殖道的结构特征、天然和获得性的抗感染因子、抗精子免疫反应、性激素 对雄性生殖道免疫力的调控作用以及雄性生殖道的获得性免疫应答的激活等方面的研究动态，提出了今后的研究 方向，认为除了深入研究获得性免疫之外，雄性生殖道内天然免疫力的研究，应是十分值得关注的新方向。 39600016) ,云南省应用基础基金(96C097Q ,97C092M) 等资助。

烟草悬浮细胞抗氧化系统对微囊藻毒素-RR的响应

采用0.1mg/L的微囊藻毒素-RR(MC-RR)处理烟草BY-2悬浮细胞,测定了细胞活力、细胞内活性氧(ROS)及抗氧化系统的变化.结果表明,处理144h后,BY-2的细胞活力与对照相比无显著差异,但是处理细胞的ROS含量随着MC-RR处理时间的延长而迅速上升,96h后,细胞的ROS含量与对照差异显著;毒素处理细胞的过氧化物酶(POD)和谷胱甘肽过氧化物酶(GPX)活性明显升高,分别在处理48h和72h后与对照差异显著;细胞中还原型谷胱甘肽(GSH)含量有一个先下降后升高的过程,96h后,MC-RR处理

The field emission properties of nonpolar a-plane n-type GaN films grown on nano-patterned sapphire substrates

Si-doped nonpolar a-plane GaN films were grown on nanopatterned sapphire substrates by a low-pressure metal organic chemical vapor deposition (MOCVD) system. The structure, morphology and field emission properties of the sample were studied by means of high-resolution X-ray diffraction (HRXRD), atomic force microscopy (AFM), and field emission measurement. The XRD analysis shows that the sample is a nonpolar a-plane (11 (2) over bar0) GaN film. The field emission measurement shows that the nonpolar GaN films exhibit excellent field emission properties with a threshold emission field of as low as 10 V/mu m at a current density of 0.63 mu A/cm(2), and a high field emission current density of 74 mA/cm(2) at an applied field of 24 V/mu m. Moreover, the Fowler-Nordheirn plot of the sample fits a near linear relation. (C) 2009 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

Modes in square resonators

Modes in square resonators are analyzed and classified according to the irreducible representations of the point group C-4v. If the mode numbers p and q that denote the number of wave nodes in the directions of two orthogonal square sides are unequal and have the same even-odd characteristics, the corresponding double modes are accidentally degenerate and can be combined into two new distributions with definite parities relative to the square diagonal mirror planes. The distributions with odd parities belong to the whispering-gallery-like modes in square resonators. The mode frequencies and quality factors are also calculated by the finite-difference time-domain technique and Pade approximation method. The numerically calculated mode frequencies agree with the theoretical ones very well and the whispering-gallery-like modes have quality factors much higher than other modes, including their accidentally degenerate counterparts in square resonators.

An algorithm of analysis tools on points distribution in high dimension space: The distance of a point and an infinite sub-space

This paper discusses the algorithm on the distance from a point and an infinite sub-space in high dimensional space With the development of Information Geometry([1]), the analysis tools of points distribution in high dimension space, as a measure of calculability, draw more attention of experts of pattern recognition. By the assistance of these tools, Geometrical properties of sets of samples in high-dimensional structures are studied, under guidance of the established properties and theorems in high-dimensional geometry.