Design of silicone rubber according to requirements based on the multi-objective optimization of chemical reactions

The explicit expression between composition and mechanical properties of silicone rubber was derived from the physics of polymer elasticity, the implicit expression among material composition, reaction conditions and reaction efficiency was obtained from chemical thermodynamics and kinetics, and then an implicit multi-objective optimization model was constructed. Genetic algorithm was applied to optimize material composition and reaction conditions, and the finite element method of cross-linking reaction processes was used to solve multi-objective functions, on the basis of which a new optimization methodology of crosslinking reaction processes was established. Using this methodology, rubber materials can be designed according to pre-specified requirements.

Design optimization of the APF DTL in the SSC-linac

A linear accelerator as a new injector for the SSC (Separated Sector Cyclotron) of the HIRFL (Heavy ton Research Facility Lanzhou) is being designed. The DTL (Drift-Tube-Linac) has been designed to accelerate U-238(34+) from 0.140 MeV/u to 0.97 MeV/u. To the first accelerating tank which accelerates U-238(34+) to 0.54 MeV/u, the approach of Alternating-Phase-Focusing (APF) is applied. The phase array is obtained by coupling optimization software Dakota and beam optics code LINREV. With the hybrid of Multi-objective Genetic Algorithm (MOGA) and a pattern search method, an optimum array of asynchronous phases is determined. The final growth, both transversely and longitudinally, can meet the design requirements. In this paper, the deign optimization of the APF DTL is presented.

装备维修规划的多目标优化模型和求解算法

为有效地刻画和求解军事装备系统的维修规划问题,建立了一个以维修费用和任务能力为目标的约束优化模型,提出了一种求解装备维修规划问题的多目标禁忌搜索算法。模型考虑了维修器材和工时两种费用指标,并在数质量评估的基础上通过二次回归方程来分层评估装备系统的任务能力指标。算法采用两阶段搜索策略,第一阶段从维修数量下限出发,以任务能力为演化目标进行搜索,直至找到一个可行解;第二阶段以任务能力/维修费用比为演化目标进行搜索,不断改善整个非支配解集。实验表明,算法能够求解型号≥500种,数量≥45000的大规模问题,模型和算法求解的质量也在实际应用中得到了验证。

基于神经网络的水泥生料配料多目标优化设计方法

为了降低生料成分的不确定性给水泥生料质量控制系统带来的影响,提出了率值补偿的控制策略.分别为三率值创建目标函数,并利用状态空间搜索策略解决多目标优化问题.针对初始样本空间不能覆盖所有样本的问题,提出了基于神经网络的估算模型,对初始样本空间进行拓扑.通过估价函数对状态空间中的状态量进行评价,得到最优的率值状态量;根据率值对原料配比进行调整,最后使率值偏差得到补偿,同时使给配比造成的波动最小.工业实验结果表明,生料的质量合格率由原来的30%提高到50%,该系统能有效地对配料过程进行优化控制.证明了基于神经网络的状态空间搜索策略为水泥生料配料多目标寻优问题提供了一种可行的方法。

逆向物流流量不确定闭环供应链鲁棒运作策略设计

考虑一类同时具有再分销、再制造和再利用的闭环供应链在逆向物流流量不确定环境下的运作问题.采用具有已知概率的离散情景描述逆向物流流量的不确定性,利用基于情景分析的鲁棒线性优化方法建立该闭环供应链的多目标运作模型.设计了一个数值算例,其结果验证了运作策略的鲁棒性.在该算例基础上,分析了逆向物流流量的大小对闭环供应链系统运作性能的影响.

基于遗传退火算法的装配线设计多目标优化方法

针对混装配线设计这一有约束的多目标优化问题,建立了数学模型。将基于Pareto的解的分级方法与Lp-范数形式的非线性机制相组合,构建了基于遗传退火算法多目标优化方法。重点阐述了个体编码、染色体检修、多目标处理机制等关键技术。设计了算法流程图,并开发了优化程序。该方法克服了加权和方法的不足,用模拟退火改善了遗传算法全局寻优性能。计算实例表明,随着迭代次数的增加,每代的非受控点逐渐收敛于Pareto最优边界,是一种混装线设计多目标优化的新方法。

两栖机器人轮桨腿驱动机构多目标优化设计

提出了一种既能够在陆地上爬行,又能够在一定深度的水下浮游和在海底爬行的新概念轮桨腿一体化两栖机器人;多运动模式和复合移动机构是该机器人的突出特点.分析了轮桨腿复合式驱动机构的运动机理,并采用多目标优化设计理论和算法,对驱动机构的爬行性能和浮游特性进行了综合优化,得到了两栖机器人驱动机构的结构优化参数.虚拟样机的仿真结果证明了该轮桨腿一体化两栖机器人驱动机构的综合运动性能良好,对非结构环境具有一定的适应能力。

水资源分配的决策模型及应用

水资源规划是一个复杂的系统规划问题,所以,在水资源规划中,含有大量的不精确的统计数据和模糊关系。由于这些特点,水资源规划必须用特殊的方法来解决。 本文将层次分析法(AHP)和模糊规划(Fuzzy Programming)方法相结合,形成了一种多目标规划的求解方法,并应用于大凌河流域水资源规划研究的课题中,通过实际分析可以看到,这种方法具有较好的实用性。

基于模糊多目标遗传算法的飞行器模拟件结构参数优化

空间飞行器模拟件的设计是一个具有约束的多目标多准则优化问题。本文在建立空间飞行器模拟件参数优化的数学模型的基础上,将模糊多目标决策理论用于飞行器模拟件的结构参数优化,提出了一种新的模糊评价指数。结构参数优化的结果已经用于某试验系统。

2-D and 3-D processing and interpretation of multi-fold ground penetrating radar data:a case history from an archaeological site

A 2.5-D and 3-D multi-fold GPR survey was carried out in the Archaeological Park of Aquileia (northern Italy). The primary objective of the study was the identification of targets of potential archaeological interest in an area designated by local archaeological authorities. The second geophysical objective was to test 2-D and 3-D multi-fold methods and to study localised targets of unknown shape and dimensions in hostile soil conditions. Several portions of the acquisition grid were processed in common offset (CO), common shot (CSG) and common mid point (CMP) geometry. An 8×8 m area was studied with orthogonal CMPs thus achieving a 3-D subsurface coverage with azimuthal range limited to two normal components. Coherent noise components were identified in the pre-stack domain and removed by means of FK filtering of CMP records. Stack velocities were obtained from conventional velocity analysis and azimuthal velocity analysis of 3-D pre-stack gathers. Two major discontinuities were identified in the area of study. The deeper one most probably coincides with the paleosol at the base of the layer associated with activities of man in the area in the last 2500 years. This interpretation is in agreement with the results obtained from nearby cores and excavations. The shallow discontinuity is observed in a part of the investigated area and it shows local interruptions with a linear distribution on the grid. Such interruptions may correspond to buried targets of archaeological interest. The prominent enhancement of the subsurface images obtained by means of multi-fold techniques, compared with the relatively poor quality of the conventional single-fold georadar sections, indicates that multi-fold methods are well suited for the application to high resolution studies in archaeology.