Crack Tip Field and J-Integral with Strain Gradient Effect

The mode I plane strain crack tip field with strain gradient effects is presented in this paper based on a simplified strain gradient theory within the framework proposed by Acharya and Bassani. The theory retains the essential structure of the incremental version of the conventional J_2 deformation theory No higher-order stress is introduced and no extra boundary value conditions beyond the conventional ones are required. The strain gradient effects are considered in the constitutive relation only through the instantaneous tangent modulus. The strain gradient measures are included into the tangent modulus as internal parameters. Therefore the boundary value problem is the same as that in the conventional theory Two typical crack Problems are studied: (a) the crack tip field under the small scale yielding condition induced by a linear elastic mode-I K-field and (b) the complete field for a compact tension specimen. The calculated results clearly show that the stress level near the crack tip with strain gradient effects is considerable higher than that in the classical theory The singularity of the strain field near the crack tip is nearly equal to the square-root singularity and the singularity of the stress field is slightly greater than it. Consequently, the J-integral is no longer path independent and increases monotonically as the radius of the calculated circular contour decreases.

Time-Frequency Analysis of Nonlinear Systems: The Skeleton Linear Model and the Skeleton Curves

The joint time-frequency analysis method is adopted to study the nonlinear behavior varying with the instantaneous response for a class of S.D.O.F nonlinear system. A time-frequency masking operator, together with the conception of effective time-frequency region of the asymptotic signal are defined here. Based on these mathematical foundations, a so-called skeleton linear model (SLM) is constructed which has similar nonlinear characteristics with the nonlinear system. Two skeleton curves are deduced which can indicate the stiffness and damping in the nonlinear system. The relationship between the SLM and the nonlinear system, both parameters and solutions, is clarified. Based on this work a new identification technique of nonlinear systems using the nonstationary vibration data will be proposed through time-frequency filtering technique and wavelet transform in the following paper.

基于LBM方法的高速列车空气动力学计算

利用格子波尔兹曼方法计算了高速列车的空气动力学问题.计算采用真实非简化列车几何,千万量级空间网格.不同工况的结果均真实反应实际情况,表明格子波尔兹曼方法在实际工程计算中有非常广阔的应用空间.

双模式高精度可调超分辨光瞳滤波器

基于双折射波片的特性，提出了一种具有双调节模式的连续可调超分辨光瞳滤波器。该滤波器通过两种调节模式实现超分辨，且在一定范围内连续可调。在横向旋转模式下，该滤波器为复振幅型光瞳滤波器，纵向倾斜模式下为纯相位型超分辨滤波器。通过对超分辨参量的分析，得到最佳设计参量，可以实现大的视场角，大的超分辨范围、高的调节精度。这种滤波器为实际应用提供了更多的方便。

Method for measuring the lateral aberrations of a lithographic projection system with mirror-symmetric FOCAL marks

A novel method for measuring the imaging quality of a projection system with mirror-symmetric FOCAL marks is proposed, and the principle of the method is described. Through experiments, it is demonstrated that not only the axial aberrations but also the lateral aberrations can be measured with high accuracy by the method. The advantages of the method include obtaining more aberrations than the FOCAL technique and making it much simpler to perform a full-scale measurement of the imaging quality of a lithographic projection system. (C) 2006 Society of Photo-Optical Instrumentation Engineers.

Anomalous behaviour of photorefractive grating erasure owing to existence of both negative and positive carriers

In LiNbO3:Fe, anomalous behaviour of grating erasure is observed with different wavelenghts, i.e. rapid grating erasure in the short wavelength range, which deviates from the results predicted by the electron transport band model. The deviation is related to the coexistance of electrons and holes in photorefraction, and charge-transfer process including electrons and hole has been proposed. The electron and hole contributions to photo-excitation coefficient S of the Fe centre on the wavelength.

一种电刺激噪声消除仪

本发明公开了一种电刺激噪声消除仪，包括两根用于采集生物电信号的微电极，所述微电极的信号输出端经噪声抑制电路后输出，所述噪声抑制电路包括差分放大电路和电阻电容补偿电路，所述微电极采集的电信号经电阻电容补偿电路，分别输入差分放大电路的两个输入端，经差分放大之后输出。利用本发明所述电刺激噪声(伪迹)消除仪，可以消除大于生物电信号本身约40倍以上的电刺激噪声，从而有利于实现将电刺激和单位放电记录这两项重要的神经电生理研究技术有机的结合起来，对神经电生理的研究具有积极的促进作用。

用微卫星指纹识别天鹅洲保护区长江江豚个体

DNA指纹个体识别技术是保护遗传学研究中的一种非常重要的手段。为了准确地识别天鹅洲保护区中的每一头长江江豚以开展保护遗传学及其它相关研究 ,并实施有效的种群管理 ,本研究应用 4个微卫星座位初步构建了该群体的DNA指纹图谱 ,并利用此图谱成功地对不同时期在保护区捕获的江豚进行了个体识别研究。结果显示微卫星指纹技术是一种适用于长江江豚个体识别研究的可靠手段

香港米浦基围塘中有机氯农药和多氯联苯在微型生物群落中的积累

分别在 2 0 0 1年和 2 0 0 2年用国家标准《水质 -微型生物群落监测 -PFU法》在香港米浦自然保护区的基围塘和红树林中监测水质 .在 3个基围塘中共鉴定出 91种原生动物 ,为香港地区的首次记录 .同时在群落级水平上分析了4种生态结构参数和 5种功能参数 .用化学的方法成功地监测出在此 3个基围塘的PFU挤出液中 pp′-DDE和PCB的浓度 ,并且获得两年一致性的结果 .本文化学和生物学结合的研究结果为测定水中超痕量持久性有机污染物 (POPs)的环境暴露与生态毒性提供了一种新的尝试 .图

关于九肋鳖背甲的形态与有关的记载

<正> 众所周知,我国鳖类动物中分布最广,数量最多的是中华鳖[Pelodiscus sinensis(Wieg-mann,1834)],近几年来,进行大规模人工养殖的对象,多数也是中华鳖。中华鳖的背甲都是具肋板8对。作者曾经先后仔细地观察了中华鳖42个背甲骨胳,全部恒定具8对肋板,而且没有构造上显著的变异。然而,在湖南省境内却出产一种鳖,外形与中华鳖非常相似,成鳖体型大小亦相差不很多(当地有经验的捕鳖或养鳖能手,能够加以辨认)。我国历史上就有过记载,最早追溯到明朝的晚期,我国伟大的药物学家李时珍,编写于1

Determination of the surface area of common carp, Cyprinus carpio L.

A wrap method adaptation combined with AutoCAD2005 and Scion Image for Windows were used to determine the surface area of a fish. Compared with the corresponding r(2) and F of many models, the most accurate formula: S = 752.15W(0.675) (r(2) = 0.999, F = 18362.94, P < 0.0001) for estimating the surface area of common carp was obtained. Similarly, the fin formula: S = 1834.12W(0.708) (r(2) = 0.992, F = 2690.47, P < 0.0001) was also obtained for the same purpose. It was proven that these two formulae gave good estimates of surface and fin areas of four strains of common carp: Yellow-river carp, fancy carp, mirror carp and Xingguo red carp.

Molecular beam epitaxy growth and photoluminescence of type-II (GaAs1-xSbx/InyGa1-yAs)/GaAs bilayer quantum well

We report a systematical study on the molecular beam epitaxy growth and optical property of (GaAs1-xSbx/In-y Ga1-yAs)/GaAs bilayer quantum well (BQW) structures. It is shown that the growth temperature of the wells and the sequence of layer growth have significant influence on the interface quality and the subsequent photoluminescence (PL) spectra. Under optimized growth conditions, three high-quality (GaAsSb0.29/In0.4GaAs)/GaAs BQWs are successfully fabricated and a room temperature PL at 1314 nm is observed. The transition mechanism in the BQW is also discussed by photoluminescence and photoreflectance measurements. The results confirm experimentally a type-II band alignment of the interface between the GaAsSb and InGaAs layers.