Web-based spatiotemporal visualization of marine environment data

With long-term marine surveys and research, and especially with the development of new marine environment monitoring technologies, prodigious amounts of complex marine environmental data are generated, and continuously increase rapidly. Features of these data include massive volume, widespread distribution, multiple-sources, heterogeneous, multi-dimensional and dynamic in structure and time. The present study recommends an integrative visualization solution for these data, to enhance the visual display of data and data archives, and to develop a joint use of these data distributed among different organizations or communities. This study also analyses the web services technologies and defines the concept of the marine information gird, then focuses on the spatiotemporal visualization method and proposes a process-oriented spatiotemporal visualization method. We discuss how marine environmental data can be organized based on the spatiotemporal visualization method, and how organized data are represented for use with web services and stored in a reusable fashion. In addition, we provide an original visualization architecture that is integrative and based on the explored technologies. In the end, we propose a prototype system of marine environmental data of the South China Sea for visualizations of Argo floats, sea surface temperature fields, sea current fields, salinity, in-situ investigation data, and ocean stations. An integration visualization architecture is illustrated on the prototype system, which highlights the process-oriented temporal visualization method and demonstrates the benefit of the architecture and the methods described in this study.

Particle-attached and free-living bacterial communities in a contrasting marine environment: Victoria Harbor, Hong Kong

Diversity of particle-attached and free-living marine bacteria in Victoria Harbor, Hong Kong, and its adjacent coastal and estuarial environments was investigated using DNA fingerprinting and clone library analysis. Denaturing gradient gel electrophoresis (DGGE) analysis of 16S rRNA genes showed that bacterial communities in three stations of Victoria Harbor were similar, but differed from those in adjacent coastal and estuarine stations. Particle-attached and free-living bacterial community composition differed in the Victoria Harbor area. DNA sequencing of 28 bands from DGGE gel showed Alphaproteobacteria was the most abundant group, followed by the Bacteroidetes, and other Proteobacteria. Bacterial species richness (number of DGGE bands) differed among stations and populations (particle-attached and free-living; bottom and surface). BIOENV analysis indicated that the concentrations of suspended solids were the major contributing parameter for the spatial variation of total bacterial community structure. Samples from representative stations were selected for clone library (548 clones) construction and their phylogenetic distributions were similar to those of sequences from DGGE. Approximately 80% of clones were affiliated to Proteobacteria, Bacteroidetes and Cyanobacteria. The possible influences of dynamic pollution and hydrological conditions in the Victoria Harbor area on the particle-attached and free-living bacterial community structures were discussed.

Particle-attached and free-living bacterial communities in a contrasting marine environment: Victoria Harbor, Hong Kong

Diversity of particle-attached and free-living marine bacteria in Victoria Harbor, Hong Kong, and its adjacent coastal and estuarial environments was investigated using DNA fingerprinting and clone library analysis. Denaturing gradient gel electrophoresis (DGGE) analysis of 16S rRNA genes showed that bacterial communities in three stations of Victoria Harbor were similar, but differed from those in adjacent coastal and estuarine stations. Particle-attached and free-living bacterial community composition differed in the Victoria Harbor area. DNA sequencing of 28 bands from DGGE gel showed Alphaproteobacteria was the most abundant group, followed by the Bacteroidetes, and other Proteobacteria. Bacterial species richness (number of DGGE bands) differed among stations and populations (particle-attached and free-living; bottom and surface). BIOENV analysis indicated that the concentrations of suspended solids were the major contributing parameter for the spatial variation of total bacterial community structure. Samples from representative stations were selected for clone library (548 clones) construction and their phylogenetic distributions were similar to those of sequences from DGGE. Approximately 80% of clones were affiliated to Proteobacteria, Bacteroidetes and Cyanobacteria. The possible influences of dynamic pollution and hydrological conditions in the Victoria Harbor area on the particle-attached and free-living bacterial community structures were discussed.

Study on corrosion of steels in marine environment by corrosion simulation device

Three kinds of steels were studied using electrically connected hanging specimen in the corrosion simulation device and offshore long scale hanging specimen. The experimental results obtained by the two methods show that the device can better reflect the offshore corrosion environment. A Ni-Cu-P steel specimen was studied through analysis of the specimen's corrosion products and corrosion types. The surface of the samples before and after the removal of the rust layer produced by these two methods were observed and compared after some experiments. The microstructure of the corrosion products under different marine environments were analyzed and compared through IR. It indicated good correlation between the electrically connected hanging specimen method and the long scale hanging specimen method.

The Development of a Marine Natural Product-based Antifouling Paint

Problems with tin and copper antifouling compounds have highlighted the need to develop new environmentally friendly antifouling coatings. Bacteria isolated from living surfaces in the marine environment are a promising source of natural antifouling compounds. Four isolates were used to produce extracts that were formulated into ten waterbased paints. All but one of the paints showed activity against a test panel of fouling bacteria. Five of the paints were further tested for their ability to inhibit the settlement of barnacle larvae, Balanus amphitrite, and algal spores of Ulva lactuca, and for their ability to inhibit the growth of U. lactuca. Two paints caused a significant decrease in the number of settled barnacles. One paint containing extract of Pseudomonas sp. strain NUDMB50-11, showed excellent activity in all assays. The antifouling chemicals responsible for the activity of the extract were isolated, using bioassay guided fractionation, and their chemical structures determined.

A theoretical framework of tracer methods for marine sediment dynamics

A new theoretical framework of tracer methods is proposed in the present contribution, on the basis of mass conservation. This model is applicable for both artificial and natural tracers. It can be used to calculate the spatial distribution patterns of sediment transport rate, thus providing independent information and verification for the results derived from empirical formulae. For the procedures of the calculation, first, the tracer concentration and topographic maps of two times are obtained. Then, the spatial and temporal changes in the concentration and seabed elevation are calculated, and the boundary conditions required are determined by field observations (such as flow and bedform migration measurements). Finally, based upon eqs. (1) and (13), the transport rate is calculated and expressed as a function of the position over the study area. Further, appropriate modifications to the model may allow the tracer to have different densities and grain size distributions from the bulk sediment.

Environmental and health effects associated with Harmful Algal Bloom and marine algal toxins in China

The frequency and scale of Harmful Algal Bloom (HAB) and marine algal toxin incidents have been increasing and spreading in the past two decades, causing damages to the marine environment and threatening human life through contaminated seafood. To better understand the effect of HAB and marine algal toxins on marine environment and human health in China, this paper overviews HAB occurrence and marine algal toxin incidents, as well as their environmental and health effects in this country. HAB has been increasing rapidly along the Chinese coast since the 1970s, and at least 512 documented HAB events have occurred from 1952 to 2002 in the Chinese mainland. It has been found that PSP and DSP toxins are distributed widely along both the northern and southern Chinese coasts. The HAB and marine algal toxin events during the 1990s in China were summarized, showing that the HAB and algal toxins resulted in great damages to local fisheries, marine culture, quality of marine environment, and human health. Therefore, to protect the coastal environment and human health, attention to HAB and marine algal toxins is urgently needed from the environmental and epidemiological view.

莱州湾区域表层沉积物中多氯化萘、多溴联苯醚和氯化石蜡的研究

本研究建立了沉积物中氯化石蜡（CPs）的分析方法，对莱州湾和该区域主要河流的表层沉积物中多氯萘（PCNs），多溴联苯醚（PBDEs）和CPs进行了分析，获得了他们在研究区域的含量水平、空间分布和单体分布模式，并初步探讨了它们在环境中的来源和迁移规律，估算了这三类污染物在莱州湾表层沉积物中的储量，初步评估了莱州湾沿岸的工业排放与人类活动对海洋生态环境的影响。 莱州湾海洋和河流沉积物PCNs的含量分别为65-470 pg/g dw，52-5100 pg/g dw，平均值分别为260 pg/g dw，1100 pg/g dw。莱州湾沉积物中PCNs的含量较低，与发达国家的背景值相当，主要河流沉积物与其他地区的近海、海湾、湖泊沉积物的含量相当。该区域的PCNs主要以5-Cl和6-Cl为主，为工业来源，主要受化工行业的影响。石化工厂热过程产生的低氯组分可能也是该区域PCNs的一个重要来源。莱州湾的PCNs主要来自水体颗粒的输入，而大气沉降来源的贡献不明显。 河流沉积物ΣPBDEs（不包括BDE-209）的含量分别为0.01- 53 ng/g dw，BDE-209的含量为0.74- 280 ng/g dw，平均值分别为4.4 ng/g dw，51 ng/g dw。在组成上，BDE-209占绝对优势，比低溴代BDEs高1-2个数量级，这是由于我国市场上十溴联苯醚是最主要的溴代阻燃剂。ΣPBDEs与亚洲一些地区含量相当，比北美和欧洲一些地区要低；BDE-209含量含量高出北美和欧洲一些地区，处于较高的水平。河流沉积物中BDE-47与-99，BDE-183与-153、-154具有很好的相关性，而且这几种单体质量分数相当，说明莱州湾区域存在五溴和八溴两种工业BDE阻燃剂来源。海洋沉积物中ΣPBDEs的含量为nd- 0.66 ng/g dw，平均值为0.32 ng/g dw，处于较低水平，BDE-209的含量为0.66- 12 ng/g dw，平均值为5.1 ng/g dw，与欧美一些地区相当，主要来自水体颗粒的输入。 本研究用电子捕获低分辨质谱（ECNI-LRMS）建立了沉积物中CPs的分析方法。该方法基于ECNI质谱对SCCP的响应与其氯含量在一定范围内呈线性关系的特性，建立SCCP的总响应因子与氯含量的工作曲线，从而建立定量方法。重点改进了传统方法中由于SCCP标准品和样品中氯含量不同所造成的响应因子的差别，不再要求标准品的含氯量与样品一致，从而提高了SCCP的分析效率与方法准确性。实验发现，当SCCP的实际氯含量在51%-63%之间时，二者线性关系良好（r2>0.96）。用不同氯含量的标准参考品测试，误差为8%-43%。仪器检测限和方法检测限分别为25-400 μg/L，20 ng/g。类似地，建立了中链氯化石蜡（MCCP）的分析方法，工作曲线的实际氯含量范围为44-57%，仪器检测限40-600 μg/L，方法检测限为6 ng/g。通过对比样品与标准品的峰形特征，严格控制保留时间来辨别SCCP与MCCP，实验证明由于二者叠加导致的误差：SCCP为8%，MCCP为14%，总体来说，用该方法得到的CPs数据是可靠的。本文所使用的净化方法能实现CPs与大部分有机氯化合物的分离。 用该方法对莱州湾的沉积物的CPs进行定量，除了两个河流样品MCCP的计算含氯量低于工作曲线以外，其他样品的SCCP和MCCP的计算氯含量都在工作曲线的范围之内。河流沉积物中SCCP和MCCP的含量分别为1-1200 ng/g dw，1-3300 ng/g dw，MCCP/SCCP均值为1.2；含量分布变化较大，一些河段受到工业排放的影响，CPs浓度高出均值1-2个数量级，MCCP/SCCP值也显著高出平均值。莱州湾区域大部分河流的CPs含量与欧洲、北美和日本一些地区相当，而一些受到点源污染的河段则处于较高的水平。河流中SCCP的质量分布在不同的站位不一样，在受到点源影响的样品中，C13的质量分数明显增大，占优势地位，可能是由MCCP携带的SCCP组分所致。MCCP的质量分布在河流和海洋中没有区别，都是C14占绝对优势。从氯取代的组分来讲，所有样品都是以6-8氯取代为主。海洋沉积物中SCCP和MCCP的含量分别为3-18 ng/g dw，1-13 ng/g dw， MCCP/SCCP均值为0.68，显著低于河流沉积物；SCCP的质量分布较为一致，都是以C10和C11为主。研究发现莱州湾区域SCCP与MCCP来源相似，但迁移规律有的不同。海洋环境中的MCCP可能主要来自水体颗粒的输入，而溶解态输入也是海洋环境中SCCP的重要来源。 对这三类污染物在莱州湾表层沉积物中的储量估算得到PCNs、ΣPBDEs、BDE-209、SCCP和MCCP在莱州湾表层0-10 cm沉积物中的储量分别为0.20t，0.25t，3.95t，6.52t，4.30t。拥有10%的渤海海域面积的莱州湾ΣPBDEs和BDE-209的储量分别占渤海海区总量的18-23%，18-32%，远远超过渤海的平均值。

Diversity and spatial distribution of amoA-encoding archaea in the deep-sea sediments of the tropical West Pacific Continental Margin

The ecological characteristics of the deep-sea amoA-encoding archaea (AEA) are largely unsolved. Our aim was to study the diversity, structure and distribution of the AEA community in the sediments of the tropical West Pacific Continental Margin, to develop a general view of the AEA biogeography in the deep-sea extreme environment. Archaeal amoA clone libraries were constructed. Diverse and novel amoA sequences were identified, with the Bohol Sea, Bashi Strait and Sibuyan Sea harbouring the highest and the Bicol Shelf the lowest AEA diversity. Phylogenetic and statistical analyses illustrate a heterogeneous distribution of the AEA community, probably caused by the differential distribution of the terrestrial or estuarine AEA in the various sampling sites. The deep-sea sedimentary environments potentially harbour diverse and novel AEA in the tropical West Pacific Continental Margin. The stations in the Philippine inland seas (including station 3043) may represent AEA assemblages with various terrestrial influences and the stations connected directly to the open Philippine Sea may represent marine environment-dominant AEA assemblages. Our study indicates the potential importance of geological and climatic events in the transport of terrestrial micro-organisms to the deep-sea sedimentary environments, almost totally neglected previously.

Numerical investigation of nutrient limitations in the Bohai Sea

River discharges are the important freshwater and nutrient sources for Bohai Sea (BS), and have a profound impact on the local marine environment. In this paper, the annual cycles of nutrient and phytoplankton dynamics in 1980s were reproduced using a coupled biogeochemical-physical model. Based on the validated simulations, the nutrient limitation characters were further investigated by running the model with the riverine nutrient altered, first enriching nitrogen and then phosphorus. It was found that although the riverine N:P ratios in Yellow and Haihe Rivers were much higher than the Redfield number, the nitrogen enrichment was still able to enhance the algae bloom in Laizhou and Bohai Bays. On the other hand, the response of algae growth to phosphorus enrichment was not thus obvious, which suggests that the local phytoplankton dynamics was characterized by the nitrogen limitation. Simulations also show that the nitrogen enrichment is generally accompanied by the phosphorus consumption, so a shift from nitrogen limitation to phosphorus limitation may occur if such a trend continues. (C) 2010 Elsevier Ltd. All rights reserved.

海洋环境中有机锡的形态分析及其代谢降解研究

有机锡化合物被广泛用作塑料制品中的稳定剂、船舶油漆的防污剂、工业催化剂、农林业杀虫杀菌剂以及用于木材的防腐保存等，已经引起严重的环境污染。世界上许多国家纷纷制定相应的法规对其使用加以禁止或限制。我国目前还没有明确的限制有机锡使用的法律法规，缺少有机锡污染的第一手资料，更没有长期的控制、监测与研究计划。由于有机锡的种类繁多，理化性质存在差别，所以在提取、分离和测定中均存在较大的困难。从我国这方面己有的工作来看，缺乏各种高选择性的分离方法和高灵敏度的检测方法是制约这项研究广泛开展的原因之一。有机锡的痕量与超痕量分析技术是当今环境和食品安全分析领域的前沿技术。 本论文利用高效液相色谱和电感耦合等离子体质谱联用技术建立了海洋环境中多种有机化合物的同时快速检测方法；发展了多种海洋环境样品中有机锡的前处理技术；研究了有机锡在海洋生物中的分布、代谢及降解过程中化学形态的变化；同时发展了海洋环境中多种痕量元素的快速检测方法。所建立的高效液相色谱和电感耦合等离子体质谱联用技术可同时、快速分析5种有机锡的形态(三甲基锡TMT、二苯基锡DPhT、二丁基锡DBT、三丁基锡TBT和三苯基锡TPhT)，其检出限均低于0.3μg/L。 用所建立方法对南海海洋生物样品中的有机锡污染进行了研究，利用SPSS软件对检测结果进行了探讨，发现在所研究海洋生物样品的97.2%中可检出丁基锡和苯基锡化合物，其浓度分布处于该化合物检出限～1487.8ng/g范围内。其中，贝类样品中总有机锡的平均浓度为416.9ng/g，远远高于鱼类样品中总有机锡的平均浓度（211.9ng/g）。海洋生物中存在高浓度的有机锡说明本海域有机锡污染严重，已经对生态环境造成了严重影响，危害到人类生活。其主要的污染源是防污涂料的应用，目前紧迫的问题是采取必要的措施来控制有机锡的使用。 本工作建立了海水样品和沉积物样品中五种有机锡的简单快速萃取方法。采用加入2%的环庚三烯酚（tropolone）的二氯甲烷CH2Cl2对海水中的有机锡进行萃取，大大提高了有机锡的萃取率，减少了萃取的时间，二苯基锡（DPhT）、二丁基锡（DBT）、三丁基锡（TBT）和三苯基锡（TPhT）的萃取率均在80%以上，仅三甲基锡（TMT）的萃取率较低（在50%左右），究其原因，可能是因为在萃取的过程中三甲基锡（TMT）产生了降解。采用流动相和0.2%环庚三烯酚酮（tropolone）对沉积物国际标准物质PACS-2进行超声萃取及高速离心后，用所建方法进行了分析。结果表明，测定值与标准值吻合。研究表明，所建立的方法可用于实际环境沉积物中有机锡的形态分析。 本文建立了流动注射与电感耦合等离子体质谱联用技术直接同时测定海水中多种痕量元素的方法。该方法采用痕量进样技术，能够有效地减少海水中Na，Mg, Ca和Cl等大量基体元素对待测痕量元素测定的干扰，减少这些元素在电感耦合等离子体采样锥上的盐沉积，可以同时测量海水中的V、Cr、Mn、Fe、Co、Ni、Cu、Zn、As、Mo、Cd、Pb，Hg和U等痕量级元素。用所建的方法测定南海海域海水中的重金属元素，发现Cd，Cr，As等有毒有害元素的污染很轻，均符合Ⅰ级海水的限量。 在海洋沉积物样品处理研究中，本工作改进了不需要赶走HF酸就可以对沉积物消解完全的密闭容器消解法，由于减少了赶走HF酸的步骤，使消解的时间由原来的二十个小时降低为十个小时，大大降低了消解的时间。采用该样品消解方法，并用ICP-MS测定了南黄海海域沉积物中锡及其他重金属元素的含量。建立了微波消解-ICP-MS测定海洋生物中锡、砷、镉、汞及铅等有害重金属元素的分析方法，并用于南黄海7个及南海海域29个海产品中的测定。测定结果表明海洋生物中上述有毒有害元素有不同程度的超标问题；不同种类，不同产地的海洋生物中重金属元素的含量有一定的差别，这些研究结果为海产品安全质量控制提供了有价值的科学信息。 在上述各章工作的基础上，本文研究了有机锡在海洋生物中的分布、代谢及降解过程，并初步建立了高效液相-电喷雾-飞行时间质谱（LC-APCI-TOF-MS）测定有机锡的方法，可对未知的有机锡化合物进行结构表征。有机锡在贝类中不同的组织显示，其内脏中有机锡的含量高于肌肉中有机锡含量。常规的煮、炸、蒸及微波的烹饪方式并不能降解海产品中的有机锡化合物。

Corrosion of steel structures in sea-bed sediment

Seabed sediment (SBS) is a special soil that is covered by seawater. With the developments in marine oil exploitation and engineering, more and more steel structures have been buried in SBS. SBS corrosion has now become a serious problem in marine environment and an important issue in corrosion science. In this paper, approach in the field of SBS corrosion is reviewed. Electrochemical and microbial corrosion factors, corrosion mechanism, measurement of metal corrosion rate, corrosion evaluation and prediction of corrosion are also discussed here.

Corrosion of mild steel in different granularity seabed sediment saturated with seawater

In order to investigate the corrosion of pipeline materials in Seabed Sediment (SBS) environment, weight-loss and electrochemical measurements in saturated sand and mud cells with seawater were performed for a simulation. The used electrochemical measurements included linear polarization resistance (LPR) and potentiodynamic scanning measurement. It was showed that the corrosion rate of mild steel in the present condition was lower than the corrosion rate of other marine environment corrosion zones of it; that the granularity of SBS could affect the corrosion behavior greatly; that with increasing grain size of SBS, the corrosion rate increased. Integrated over the results of the weight loss and polarization curves, the oxygen diffusion (oxygen as a depolarizant agent) mechanism was proposed and discussed.

Study on steel corrosion in different seabed sediments

A series of simulation experiments on carbon steel (A(3) steel) and low alloy steel (16 Mn steel) in marine atmosphere (MA), seawater (SW) and seabed sediment (SBS) including rough sea sand, fine sea sand and seabed mud were carried out indoors for a year or so by means of individually hanging plates (IHP) and electrically connected hanging plates (ECHP). The corrosion of steels in SBS was mainly due to the macrogalvanic cell effect. The steel plates at the bottom of SBS, as the anode of a macrogalvanic cell, showed the heaviest corrosion with a corrosion rate of up to 0.12 mm/a, approximately equal to that of steel plates in marine atmosphere. The test results showed that the corrosion rates of A(3) and 16 Mn steel in marine environment were in the order: MA > SW > SBS by the IHP method; and MA > SBS > SW by the ECHP method. The corrosion rates of steels in the water/sediment interface were directly proportional to the grain size of the SBS by the ECHP method, but those of steels in the water/sediment interface did not vary with the grain size of SBS by the IHP method. The corrosion rate of low-alloy steel was a little higher than that of carbon steel. The results of this study have important applications for design of offshore steel structures such as oil platform, pier, and port.

基于Vega Prime的多水下机器人视景仿真系统的设计与实现

介绍了一套多水下机器人三维视景仿真系统。该系统采用虚拟现实技术，利用虚拟仿真软件VegaPrime 与Visual C++.NET 2003 混合编程实现三维视景仿真。它主要用于海洋环境的模拟和多水下机器人运行时的位姿更新、碰撞检测、环境效果及各种特效的实时显示。此外，它还具有响应各种输入/输出设备的功能和通过人性化图形界面接口与用户进行交互的功能。