Microstructure and wear resistance of in situ TiCp composite coating by laser cladding

A new in situ method was realized by one step laser cladding to produce Ni-base alloy composite coating reinforced by in situ reacted and gradiently distributed TiCp particles. The submicron TiCp particles were formed and uniformly distributed because of the in situ reaction and trapping effect under the rapid solidification condition. And, TiCp particles were of gradient distribution on a macro scale and their volume fraction increased from 1.86% at the layer/substrate interface to a maximum 38.4% at the surface of the layer. Furthermore, the in situ generated TiCp/gamma-Ni interfaces were free from deleterious surface reactions. Additionally, the clad coating also revealed a high microhardness of gradient variation with the layer depth and the superior abrasive wear resistance.

Influence of stochastic mesoscopic structure on macroscopic mechanical behavior of brittle material

A newly developed numerical code, MFPA(2D) (Material Failure Process Analysis), is applied to study the influence of stochastic mesoscopic structure on macroscopic mechanical behavior of rock-like materials. A set of uniaxial compression tests has been numerically studied with numerical specimens containing pre-existing crack-like flaw. The numerical results reveal the influence of random mesoscopic structure on failure process of brittle material, which indicates that the variation of failure mode is strongly sensitive to the local disorder feature of the specimen. And the patterns of the crack evolution in the specimens are very different from each other due to the random mesoscopic structure in material. The results give a good explanation for various kinds of fracture modes and peak strength variation observed in laboratory studies with specimens made from the same rock block being statistically homogenous in macro scale. In addition, the evolution of crack is more complicated in heterogeneous cases than in homogeneous cases.

基于RS和GIS的四川省土地利用/覆盖变化及可持续利用研究

LUCC是全球变化研究的核心主题之一，也是社会经济可持续发展的关键问题。改革开放后四川的社会经济发展非常快，在各种因素的驱动下，土地利用/覆盖发生了深刻变化。目前四川省缺乏基于实际调查数据的、全域性的、具有连续时间序列的LUCC和驱动力分析及土地可持续利用研究成果，这对我们从全局上把握全省土地利用现状、发展变化趋势，利用土地政策参与宏观调控，实现长期可持续发展目标，建设资源节约型、环境友好型社会极为不利。本研究针对这一问题，选取全川八大土地利用类型作为研究对象，研究了全省1996年到2006年的土地利用/覆盖格局和变化情况，分析了不同尺度的驱动因素，对全省农用地和建设用地的集约利用状况、潜力进行了分析评价，并提出相应的对策措施。 1．1996年-2006年10年来整个省域的土地利用/覆盖格局变化。 （1）1996年-2006年全省的土地利用/覆盖格局 1996年，全省是一个以农用地为主的土地利用/覆盖格局，林地和牧草地属于优势覆盖类型（合占69.17%），居民点及工矿用地和交通用地合占只有3%左右。 2000年的LUCC格局较为明显的特点是耕地所占比重下降0.4个百分点，水域和未利用土地所占比重有所下降，牧草地保持不变，其余地类所占比重有所上升。 与2000年相比，2004年林草地的优势格局进一步得到强化（合占比重达到70.23%）。耕地面积占幅员面积的比重下降0.83个百分点，略有下降的有未利用土地、水域和牧草地。值得关注的是在“退耕还林还草”的大背景下，牧草地占幅员面积的比重下降0.04个百分点。 到2006年，仍为林草地为主导优势的格局，二者合占上升0.15%。在城市化快速推进的背景下，居民点及工矿用地中的城市用地和建制镇用地占比重超过15%，农村居民点占比重降至76%。交通用地中农村道路占比重降至57.8%,公路用地占比重升至37.5%。五个地貌区的土地利用/覆盖格局与全省的变化基本一致。值得关注的是盆西平原区的交通用地上升幅度和盆地丘陵区的未利用土地的开发利用力度明显大于其它地貌区。 （2）1996-2006年10年间土地利用/覆盖格局的变化 1996-2000年4年间，耕地、水域和未利用地三个地类下降，年均减少0.75、0.19和0.32个百分点。其中耕地年均减少49229.0公顷，约一半流向林地，13.77%流向园地，约20%流向建设用地。另外5个地类面积增长，增长绝对量最大的是林地，年均增长40063.7公顷，交通用地增幅最大，4年年均增长达1.95%。 2001-2004年是西部大开发逐步推进、“退耕还林还草”项目全面展开和土地整理深入实施的关键期，LUCC更为深刻。耕地、未利用地、水域和牧草地四个地类面积下降，其余地类按增长幅度依次是园地、交通用地、居民点及工矿用地和林地。耕地加速下降，年均降幅达到1.59%，其减少去向主要是林地（占66.75%）和园地（占19.84%），其增加来源主要是未利用地、园地和水域。交通用地的增幅最大，为3.96%,其增加主要来源于耕地、未利用土地和林地，分别占49.96%、16.63%和13.09%。居民点及工矿用地增长幅度为3.12%。 从1996年到2006年的10年间，耕地、未利用地、水域和牧草地下降幅度分别为10.36%、3.61%、1.34%和0.26%。园地增幅达23.61%。绝对面积增长最大的则是林地，达630733.3公顷。交通用地和居民点及工矿用地增幅也较大，分别为15.00%和9.31%。 10年间年均总变化量为310326.6公顷，2000年-2004年之间变化最大（为356865.8公顷），高于平均变化量，而1996-2000年间和2004-2006年间都小于平均变化量。 （3）10年间不同地貌区的LUCC变化 盆西平原区的特点是园地大幅上升达77%，居民点及工矿用地和交通用地也大幅上升，耕地、未利用地下降幅度大，该区耕地、水域、未利用地的减少强度和园地、居民点及工矿用地、交通用地的上升强度均居五区第一；盆地丘陵区的特点是牧草地下降幅度大，为-36.89%,交通用地、园地和林地上升幅度较大，该区耕地减少、未利用地减少、林地增加、居民点及工矿用地和交通用地增加的变化强度均居五区相应地类增减的第二位；盆周山地区的特点是耕地减少较多，交通用地和园地增长较大，该区林地变化强度居各区第一位，牧草地和水域变化强度居各区第二位，耕地、居民点及工矿用地和未利用地居各区第三位；川西南山地区的特点是园地、耕地、交通用地和居民点及工矿用地变化幅度大，另外四个地类变化较小。该区减少的牧草地占全省牧草地减少的97.91%，变化强度居各个地貌区的第一位，园地相对变化强度居五区的第二位；川西北高山高原区的特点是耕地大幅下降、园地大幅上升，交通用地升幅也较大，其余地类变化不大。值得注意的是，该区牧草地和水域面积增加，与全省该地类的变化相反。其余地类的相对变化强度均是五个地貌区中最小的。 用变化强度分值考量变化强度，盆西平原区的变化强度最大，盆地丘陵区和盆周山地区的变化强度相当，川西北高山高原区的变化强度则要小得多。 （4）1996年及2006年全省土地利用/覆盖格局的景观生态学分析 全省是以自然景观占优势（占约70%）、农业景观为补充、建设用地景观居于从属地位的土地利用景观格局。景观多样性和均匀度不高。到2006年，全省总的景观格局并无大的改变。总体情况是随着时间的推移和人类活动的加强，区内景观优势度上升、多样性和均匀度变小。但斑块数减少，斑块面积和斑块孔隙度有所增大。斑块的形状指数和分维数均有所下降，表明受人为干扰有加剧的趋势。反映景观格局结构的破碎度指数有轻微下降。景观指数的变化表明全省土地利用有缓慢集中、规模聚集的趋势。 （5）三大生态建设工程对土地利用/覆盖变化的影响 1996-2006年间LUCC与三大生态建设工程实施的耦合分析，发现退耕工程对耕地、林地、牧草地等地类覆盖变化的影响最大，天保工程次之，长防工程最小。 2.四川省LUCC驱动力分析 （1）总体分析： 从整体上分析，人为因素对区域整体LUCC的影响从1996年的63.32%增加到2006年的66.99%，变得日益强烈。同时人为因素影响强度表现出明显的区域差异，地势平缓、经济区位条件好的区域其人为影响强度明显较高。 政策体制转变下的经济高速增长、快速的城市化、工业化过程和生态建设是四川省LUCC宏观尺度的驱动因素。区域的LUCC主要受到了由内向外(从城市到乡村)和由外向内(从山顶向平地)两种作用力的共同推动。局部尺度上，如距离交通线、水利线、中心城市的远近，地形凸起、大型独立项目落址、重污染项目的阻隔等，甚至一些乡规民俗等因素也会成为LUCC的驱动影响因素。在较小的尺度上,人类个体行为选择对LUCC的影响也是存在的。 　　根据驱动因子的特性作者将其划分为驱变、阻变、良性、惰性因子等类型。 （2）分地貌区的驱动因子分析 各地貌区都存在城市化、工业化、生态工程实施、自然灾害等驱动因子，但主次不一。对于盆西平原和盆地丘陵区，城市化、工业化是前两位的因子，而对另外三个地貌区，生态工程实施和产业结构调整则成为第第一、二位的驱动因子。 （3）分地类的驱动因子分析（以坡耕地为例） 分坡度的耕地变化分析发现，耕地减少主要集中在2°以下的平地、15°-25°和25°以上三个坡度级，是其它坡度级耕地减幅的三倍左右。这表明耕地减少受城市化进程和“退耕还林还草”工程驱动影响尤为巨大。 3.土地利用格局优化、集约利用评价和可持续利用及对策研究 （1）土地利用格局优化的战略选择及调整预测 土地利用格局调整的战略是农业生产用地、建设用地和生态及其他用地占幅员的比重分别稳定在13%、7%和80%左右，重点是三大类别内部二级和三级地类的合理调整。 （2）全省土地集约利用评价 全省农用地利用集约度为0.46，总体上集约度不高，处于较适度利用阶段。建设用地利用集约度为0.38，处于较适度利用阶段。集约利用提升空间较大。 农用地的潜力主要在于加强土地保育、完善利用制度、提高单产。城市建设用地的包括存量潜力、强度潜力、结构潜力，空间很大。农村居民点整理潜力可以逐步挖掘。 （3）新增建设用地集约利用的统筹安排 据测算，到2020年，四川省城市建设用地需求量在463850-492360hm2之间，城镇各业新增建设用地规模为361276.79hm2，占用耕地200565.94 hm2。2004-2020年间四川省农村居民点整理潜力33.86万hm2。农村居民点建设用地需求量为70.57万公顷。 （4）土地集约利用措施与坡耕地可持续利用战略 提出了土地集约利用的措施。在对坡耕地生态系统结构与功能分析的基础上，提出坡耕地可持续利用战略与生态恢复战略，并从技术和政策层面提出了坡耕地合理利用和生态退耕的措施和建议。 LUCC is one of the key questions of global change and sustainable development of society. After the opening and reform of China, the society and economy of Sichuan Province developed very fast ,the land-use/cover changed very strong droved by many factors .But nowadays we have no constant spatial-temporal study and driving force analysis about the whole province based on investigation. And it is lack of land sustainable utilization study based on correlative study. So we choose all the land resource in Sichuan, combine RS and GIS and field investigation, and take statistic-mathematic means and system analysis, to study the LUCC patterns and different scale driving force of different physiognomy regions, land cover types and periods; to analyze the current situation and potential of land resource intensive utilization, and gave out corresponding measurements. We found that forest and grassland are the dominant cover types of Sichuan provincial land –use/cover pattern, and becoming more and more stronger from 1996 to 2006,the natural landscape is the metric and occupy 70%,the diversity and evenness index are not high; the totally change quantity from 2000 to 2004 is the biggest; cultivated land especially steep cultivated land ,garden plot, forestry land ,settlement and industry land and traffic land changed relative stronger; among five physiognomy regions ,the changing intensity of PEN XI PING YUAN QU is the biggest, CHUAN XI BEI GAO SHAN GAO QU is smallest; under the background of policy system changing, the fast developing of economy, fast urbanization and industrialization and ecology construction are the macro-scale driving force of Sichuan provincial LUCC; to compare the impacts of “TUI GENG GONG CHENG” on LUCC especially to cultivated land ,forestry land and grassland is strongest, “TIAN BAO GONG CHENG ” is stronger,“ HANG FANG GONG CHENG” is smallest; the intensive utilization level of farmland and construction land of whole province is relative moderation, there is huge potential to excavate and fulfill the increasing demand of construction land；we must take synthetic measurements to accelerate the sustainable utilization of land resource, including administrative, economical ,technological and ecological policies.

Impacts of socio-economic factors on sediment yield in the Upper Yangtze River

In recent years, the role of human activities in changing sediment yield has become more apparent for the construction of hydraulic engineering and water conservation projections in the Upper Yangtze River, but it has not been evaluated at the macro scale. Taking Sichuan Province and Chongqing City as an example, this paper studies the relationship between socio-economic factors and sediment yield in the Upper Yangtze River based on section data in 1989 and 2007. The results show that sediment yield is significantly correlated with population density and cultivated area, in which the former appears to be more closely related to sediment yield. Moreover, in the relation of sediment yield vs. population density, a critical value of population density exists, below which the sediment yield increases with the increase of population density and over which the sediment yield increases with the decrease of population density. The phenomenon essentially reflects the influence of natural factors, such as topography, precipitation and soil property, and some human activities on sediment yield. The region with a higher population density than critical value is located in the east of the study area and is characterized by plains, hills and low mountains, whereas the opposite is located in the west and characterized by middle and high mountains. In the eastern region, more people live on the lands with a low slope where regional soil erosion is slight; therefore, sediment yield is negatively related with population density. In contrast, in the western region, the population tends to aggregate in the areas with abundant soil and water resources which usually lead to a higher intensity of natural erosion, and in turn, high-intensity agricultural practices in these areas may further strengthen local soil erosion. It is also found that population tends to move from the areas with bad environment and high sediment yield to the areas with more comfortable environment and less sediment yield. The natural factors have greater influence on sediment yield of western region than that of eastern region. Generally, the natural factors play a dominant role on sediment yield in the Upper Yangtze River.

Trans-Scale Mechanics: Looking For The Missing Links Between Continuum And Micro/Nanoscopic Reality

Problems involving coupled multiple space and time scales offer a real challenge for conventional frameworks of either particle or continuum mechanics. In this paper, four cases studies (shear band formation in bulk metallic glasses, spallation resulting from stress wave, interaction between a probe tip and sample, the simulation of nanoindentation with molecular statistical thermodynamics) are provided to illustrate the three levels of trans-scale problems (problems due to various physical mechanisms at macro-level, problems due to micro-structural evolution at macro/micro-level, problems due to the coupling of atoms/molecules and a finite size body at micro/nano-level) and their formulations. Accordingly, non-equilibrium statistical mechanics, coupled trans-scale equations and simultaneous solutions, and trans-scale algorithms based on atomic/molecular interaction are suggested as the three possible modes of trans-scale mechanics.

Spallation analysis with a closed trans-scale formulation damage evolution

A closed, trans-scale formulation of damage evolution based on the statistical microdamage mechanics is summarized in this paper. The dynamic function of damage bridges the mesoscopic and macroscopic evolution of damage. The spallation in an aluminium plate is studied with this formulation. It is found that the damage evolution is governed by several dimensionless parameters, i.e., imposed Deborah numbers De* and De, Mach number M and damage number S. In particular, the most critical mode of the macroscopic damage evolution, i.e., the damage localization, is deter-mined by Deborah number De+. Deborah number De* reflects the coupling and competition between the macroscopic loading and the microdamage growth. Therefore, our results reveal the multi-scale nature of spallation. In fact, the damage localization results from the nonlinearity of the microdamage growth. In addition, the dependence of the damage rate on imposed Deborah numbers De* and De, Mach number M and damage number S is discussed.

Characteristic Dimensionless Numbers in Multi-Scale and Rate-Dependent Processes

For this sake, the macroscopic equations of mechanics and the kinetic equations of the microstructural transformations should form a unified set that be solved simultaneously. As a case study of coupling length and time scales, the trans-scale formulation

Synchronous Multi-Scale Observations on Rock Damage and Rupture

This paper reports a multi-scale study on damage evolution process and rupture of gabbro under uniaxial compression with several experimental techniques, including MTS810 testing machine, white digital speckle correlation method, and acoustic emission technique. In particular, the synchronization of the three experimental systems is realized for the study of relationship of deformation and damage at multiple scales. It is found that there are significant correlation between damage evolution at small and large length scales, and rupture at sample scale, especially it displays critical sensitivity at multiple scales and trans-scale fluctuations.

Generation of large-scale vortex dislocations in a three-dimensional wake-type flow

Numerical study of three-dimensional evolution of wake-type flow and vortex dislocations is performed by using a compact finite diffenence-Fourier spectral method to solve 3-D incompressible Navier-Stokes equations. A local spanwise nonuniformity in momentum defect is imposed on the incoming wake-type flow. The present numerical results have shown that the flow instability leads to three-dimensional vortex streets, whose frequency, phase as well as the strength vary with the span caused by the local nonuniformity. The vortex dislocations are generated in the nonuniform region and the large-scale chain-like vortex linkage structures in the dislocations are shown. The generation and the characteristics of the vortex dislocations are described in detail.

The Uniaxial Tensile Deformation of Ni Nanowire: Atomic-Scale Computer Simulations

The mechanical deformations of nickel nanowire subjected to uniaxial tensile strain at 300 K are simulated by using molecular dynamics with the quantum corrected Sutten-Chen many-body force field. We have used common neighbor analysis method to investigate the structural evolution of Ni nanowire during the elongation process. For the strain rate of 0.1%/ps, the elastic limit is up to about 11% strain with the yield stress of 8.6 GPa. At the elastic stage, the deformation is carried mainly through the uniform elongation of the distances between the layers (perpendicular to the Z-axis) while the atomic structure remains basically unchanged. With further strain, the slips in the {111} planes start to take place in order to accommodate the applied strain to carry the deformation partially, and subsequently the neck forms. The atomic rearrangements in the neck region result in a zigzag change in the stress-strain curve; the atomic structures beyond the region, however, have no significant changes. With the strain close to the point of the breaking, we observe the formation of a one-atom thick necklace in Ni nanowire. The strain rates have no significant effect on the deformation mechanism, but have some influence on the yield stress, the elastic limit, and the fracture strain of the nanowire.

Effects of Subgrid-Scale Modeling on Time Correlations in Large Eddy Simulation

The effects of the unresolved subgrid-scale (SGS) motions on the energy balance of the resolved scales in large eddy simulation (LES) have been investigated actively because modeling the energy transfer between the resolved and unresolved scales is crucial to constructing accurate SGS models. But the subgrid scales not only modify the energy balance, they also contribute to temporal decorrelation of the resolved scales. The importance of this effect in applications including the predictability problem and the evaluation of sound radiation by turbulent flows motivates the present study of the effect of SGS modeling on turbulent time correlations. This paper compares the two-point, two-time Eulerian velocity correlation in isotropic homogeneous turbulence evaluated by direct numerical simulation (DNS) with the correlations evaluated by LES using a standard spectral eddy viscosity. It proves convenient to express the two-point correlations in terms of spatial Fourier decomposition of the velocity field. The LES fields are more coherent than the DNS fields: their time correlations decay more slowly at all resolved scales of motion and both their integral scales and microscales are larger than those of the DNS field. Filtering alone is not responsible for this effect: in the Fourier representation, the time correlations of the filtered DNS field are identical to those of the DNS field itself. The possibility of modeling the decorrelating effects of the unresolved scales of motion by including a random force in the model is briefly discussed. The results could have applications to the problem of computing sound sources in isotropic homogeneous turbulence by LES

Improving Nucleation in the Fabrication of High-Quality 3D Macro-Porous Copper Film through The Surface-Modification of A Polystyrene Colloid-Assembled Template

A new approach is developed to the fabrication of high-quality three-dimensional macro-porous copper films. A highly-ordered macroporous copper film is successfully produced on a polystyrene sphere (PS) template that has been modified by sodium dodecyl sulfate (SDS). It is shown that this procedure can change a hydrophobic surface of PS template into a hydrophilic surface. The present study is devoted to the influence of the electrolyte solution transport on the nucleation process. It is demonstrated that the permeability of the electrolyte solution in the nanochannels of the PS template plays an important role in the chemical electrodeposition of high-quality macroporous copper film. The permeability is drastically enhanced in our experiment through the surface modi. cation of the PS templates. The method could be used to homogeneously produce a large number of nucleations on a substrate, which is a key factor for the fabrication of the high-quality macroporous copper film.

An analysis of subgrid-resolved scale interactions with use of results from direct numerical simulations

Subgrid nonlinear interaction and energy transfer are analyzed using direct numerical simulations of isotropic turbulence. Influences of cutoff wave number at different ranges of scale on the energetics and dynamics have been investigated. It is observed that subgrid-subgrid interaction dominates the turbulent dynamics when cut-off wave number locates in the energy-containing range while resolved-subgrid interaction dominates if it is in the dissipation range; By decomposing the subgrid energy transfer and nonlinear interaction into 'forward' and 'backward' groups according to the sign of triadic interaction, we find that individually each group has very large contribution, but the net of them is much smaller, implying that tremendous cancellation happens between these two groups.

Numerical simulation of rock failure and earthquake process on mesoscopic scale

On the basis of the lattice model of MORA and PLACE, Discrete Element Method, and Molecular Dynamics approach, another kind of numerical model is developed. The model consists of a 2-D set of particles linked by three kinds of interactions and arranged into triangular lattice. After the fracture criterion and rules of changes between linking states are given, the particle positions, velocities and accelerations at every time step are calculated using a finite-difference scheme, and the configuration of particles can be gained step by step. Using this model, realistic fracture simulations of brittle solid (especially under pressure) and simulation of earthquake dynamics are made.

Extended self-similar scaling law of multi-scale eddy structure in wall turbulence

The longitudinal fluctuating velocity of a turbulent boundary layer was measured in a water channel at a moderate Reynolds number. The extended self-similar scaling law of structure function proposed by Benzi was verified. The longitudinal fluctuating velocity, in the turbulent boundary layer was decomposed into many multi-scale eddy structures by wavelet transform. The extended self-similar scaling law of structure function for each scale eddy velocity was investigated. The conclusions are I) The statistical properties of turbulence could be self-similar not only at high Reynolds number, but also at moderate and low Reynolds number, and they could be characterized by the same set of scaling exponents xi (1)(n) = n/3 and xi (2)(n) = n/3 of the fully developed regime. 2) The range of scales where the extended self-similarity valid is much larger than the inertial range and extends far deep into the dissipation range,vith the same set of scaling exponents. 3) The extended selfsimilarity is applicable not only for homogeneous turbulence, but also for shear turbulence such as turbulent boundary layers.