Thermal-mechanical interface crack behaviour of a surface mount solder joint

The effect of thermal-mechanical loading on a surface mount assembly with interface cracks between the solder and the resistor and between the solder and the printed circuit board (PCB) was studied using a non-linear thermal finite element analysis. The thermal effect was taken as cooling from the solder eutectic temperature to room temperature. Mechanical loading at the ends of the PCB was also applied. The results showed that cooling had the effect of causing large residual shear displacement at the region near the interface cracks. The mechanical loading caused additional crack opening displacements. The analysis on the values of J-integral for the interface cracks showed that J-integral was approximately path independent, and that the effect of crack at the solder/PCB interface is much more serious than that between the component and solder.

SOCIAL-DEVELOPMENT OF INFANTS OF MACACA-THIBETANA AT MOUNT-EMEI, CHINA

The development of infant Macaca thibetana was studied at Mount Emei, China, and compared to that of other macaque species. It was found that there are many common features in the process of infant socialization in species of the genus Macaca: mothers play an important and active role, other group members influence the infants' development to a greater or lesser extent and play is a major activity in the life of infants. Some differences were found to exist, however, between macaque species. These included differences in maternal care behaviour such as 'len', leaving time and weaning time. Paternal behaviours were also found to vary within and among species. Tibetan macaque males care for infants extensively, and they may use infants as an agonistic buffer. The natural and social environment may also influence differences between macaque species in infant development.

NATURAL FOODS AND THEIR ECOLOGICAL IMPLICATIONS FOR MACACA-THIBETANA AT MOUNT EMEI, CHINA

Natural food plants of partly provisioned groups of Macaca thibetana included about 196 species belonging to 135 genera and 72 families. The macaques consumed mainly bamboo shoots and fruits for about 2 months in autumn, whereas they relied on active or passive provisions from visitors, a variety of structural parts of plants and a small amount of invertebrates in late spring and summer and ate mainly mature leaves and bark for the rest of the year. About half of the species eaten came from the dense herb and shrub layers. This forest-dwelling species shows a distinctive feeding and foraging pattern in comparison with other macaques, explaining why M. thibetana has the largest body weight of all macaques.

DRAMATIC CONSEQUENCES OF FOOD HANDOUTS TO MACACA-THIBETANA AT MOUNT-EMEI, CHINA

Food handouts to Macaca thibetana at Mt. Emei have had dramatic consequences for both man and monkey as tourism has increased over the last decade. Food handouts and human submissive behaviour facilitate beg-robbing by the monkeys. which can be regarded as a mixed conditioning chain. Because of their lack of understanding of primate behaviour and resulting inappropriate responses, many visitors have lost possessions and have been severely frightened or even injured; in fact there have been 1 0 deaths as an indirect result over that past 8 years. The appropriate human response proved to be the display of dominance to maintain a distance from a beg-robbing monkey. Road-ranging macaques have also been injured or killed by visitors to obtain meat or bones or merely for amusement. Attempts should be made to eliminate the negative effects of food handouts by increasing visitors' awareness of behavioural and ecological aspects and through aversive conditioning of the macaques.

Modeling the effect of ozone loss on photobleaching of chromophoric dissolved organic matter in the St. Lawrence estuary

Temporal trends in total ozone for the St. Lawrence estuary were estimated from ground-based measurements at the NOAA/CMDL station in Caribou, Maine. Linear regression analysis showed that from 1979 to 1999 total ozone has decreased by about 3.3% per decade on an annual basis and ≤6.2% per decade on a monthly basis relative to unperturbed (pre-CFC) levels. The influence of increased ultraviolet-B (280–320 nm) radiation associated with ozone depletion on water column photochemical processes was evaluated by modeling the photobleaching of chromophoric dissolved organic material (CDOM). Linear regression analysis showed small (<0.5% per decade), but statistically significant upward trends in maximum noontime photobleaching rates. Most notably, positive trends in relative rates for May, June, and July, when maximum absolute rates are expected, were predicted. A global model based on TOMS ozone data revealed increases in photobleaching of ≤3% per decade at high latitudes in the Southern Hemisphere. Radiation amplification factors for increases in photochemically weighted UV (280–400 nm) in response to ozone depletion were estimated at 0.1 and 0.08 for photobleaching of CDOM absorbance at 300 and 350 nm, respectively. Application of the laboratory-based model to conditions that more closely resembled those in situ were variable with both overestimation and underestimation of measured rates. The differences between modeled rates and observed rates under quasi-natural conditions were as large or larger than the predicted increases due to ozone depletion. These comparisons suggest that biological activity and mixing play an important, but as yet ill-defined, role in modifying photochemical processes.

The influence of arrangement of St in MBS on the properties of PVC/MBS blends

Three series of MBS core-shell impact modifiers were prepared by grafting styrene and methyl methacrylate onto PB or SBR seed latex in emulsion polymerization. All the MBS modifiers were designed to have the same total chemical composition, and MMA/Bd/St equals 30/42/28, which is a prerequisite for producing transparent blends with PVC. Under this composition, there were three different ways of arrangement for styrene in MBS, which led to the different structure of MBS modifier. The concentration of MBS in PVC/MBS blends was kept at a constant value of 20 wt.%. The effects of arrangement of St in MBS on the mechanical and optical properties of PVC/MBS blends were studied. The notched Izod impact test results showed that the MBS with a PB homopolymer core grafted with St had a lowest brittle-ductile transition (BDT) temperature and BDT temperature increased with the amount of St copolymerized with Bd in the core of MBS. The transparency of blends also increased with the amount of St copolymerized with Bd in the core. TEM results showed that the arrangement of St in MBS influenced the deformation behavior. Two deformation modes were observed in the blends: cavitation and shear yielding.

Studies on polyepichlorohydrin-based polyurethane/poly(MMA-co-St) IPNs

Interpenetrating polymer networks of polyepichlorohydrin-based polyurethane/poly(MMA-co-St) have been prepared with simultaneous mettled by changing the weight fraction of MMA(W-MMA) in copolymer of MMA with styrene. The IPNs have been studied by DSC, TEM and dynamic mechanical spectroscopy(DMS). The results show that the IPNs have only one T-g, when W-MMA is greater than 0. 6. But when W-MMA IMA is less than 0. 4, the IPNs have two T(g)s, and phase separation is observed on TEM. The phenomenon is explained according to the solubility parameters(delta) and the fraction of hydrogen bond(delta(h)) of P (MMA-co-St). The study reveals that there is a close correlation among the delta, domain size and mechanical properties of PU (PECH)/P(MMA-co-St) IPN.

VTMS与Bz、St及HFP等离子体共聚物的性能研究

采用外部电极电容耦合的RF辉光放电装置,对乙烯基三甲基硅烷(VTMS)与苯(Bz)、苯乙烯(St)以及六氟丙烯(HFP)进行共聚合。通过IR、TG、防潮试验、接触角测试研究了共聚物膜的性能。发现VTMS与Bz、St的共聚物膜具有优良的防潮性。

Isolation and characterization of a novel variant of HMW glutenin subunit gene from the St genome of Pseudoroegneria stipifolia

The x- and y-type high molecular weight (HMW) glutenin subunits are conserved seed storage proteins in wheat and related species. Here we describe investigations on the HMW glutenin subunits from several Pseudoroegneria accessions. The electrophoretic mobilities of the HMW glutenin subunits from Pd. stipifolia, Pd tauri and Pd strigosa were much faster than those of orthologous wheat subunits, indicating that their protein size may be smaller than that of wheat subunits. The coding sequence of the Glu-1St1 subunit (encoded by the Pseudoroegneria stipifolia accession PI325181) was isolated, and found to represent the native open reading frame (ORF) by in vitro expression. The deduced amino acid sequence of Glu-1St1 matched with that determined from the native subunit by mass spectrometric analysis. The domain organization in Glu-1St1 showed high similarity with that of typical HMW glutenin subunits. However, Glu-1St1 exhibited several distinct characteristics. First, the length of its repetitive domain was substantially smaller than that of conventional subunits, which explains its much faster electrophoretic mobility in SDS-PAGE. Second, although the N-terminal domain of Glu-1St1 resembled that of y-type subunit, its C-terminal domain was more similar to that of x-type subunit. Third, the N- and C-terminat domains of Glu-1St1 shared conserved features with those of barley D-hordein, but the repeat motifs and the organization of its repetitive domain were more similar to those of HMW glutenin subunits than to D-hordein. We conclude that Glu-1St1 is a novel variant of HMW glutenin subunits. The analysis of Glu-1St1 may provide new insight into the evolution of HMW glutenin subunits in Triticeae species. (C) 2007 Elsevier Ltd. All rights reserved.