Catalytic Dehydration of Ethanol to Ethylene on TiO2/4A Zeolite Composite Catalysts

TiO2/4A zeolite composite catalysts were prepared by coating TiO2 on 4A zeolite via liquid phase deposition. The TiO 2/4A zeolite composite catalysts wtih higher surface weak acidity and lower mediate strong acidity exhibit much better catalytic performance on ethanol dehydration to ethylene compared with 4A zeolite. It is suggested that the TiO2 promoter could improve the effective Lewis acidity of composite catalyst which consequently enhanced the catalytic performance.

Effects of zirconia phase on the synthesis of higher alcohols over zirconia and modified zirconia

The catalytic performances of ZrO2-based catalysts were evaluated for the synthesis of higher alcohols from synthesis gas. The crystal phase structures were characterized by X-ray diffraction (XRD) and UV Raman. The results indicated that ZrO2 and Pd modified ZrO2 catalysts were effective catalysts in the synthesis of ethanol or isobutanol, and their selectivities basically depended on the crystal phase of ZrO2 surface. The ZrO2 with surface tetragonal crystal phase exhibited a high activity to form ethanol, while the ZrO2 with surface monoclinic crystal phase exhibited a high activity to form isobutanol. Temperature-programmed desorption (TPD) experiment indicated that the high activity of isobutanol formation from synthesis gas over monoclinic zirconia was due probably to the strong Lewis acidity of Zr4+ cations and the strong Lewis basicity of O2- anions of coordinative unsaturated Zr4+-O2- pairs on the surface of monoclinic ZrO2. (C) 2003 Elsevier B.V. All rights reserved.

Synthesis, structure characterization of the complexes of beta-alkoxycarbonylethyltin trichlorides with Schiff base ligands

Thirty - two title complexes (ROCOCHRCH2SnCl3)-C-1 . (2 - HOC6H4CH = NC6H4 - X) (R = Me, Et, n - Bu; R-1 = H, Me; X = H,4' - Cl, 3' - Pr, 3' - OH, 3', 4' - Cl-2, 4' - OMe) were synthesized and characterized by elemental analysis,UV - vis, IR, H-1 NMR. The crystal structure of n - BuOCOCH2CH2SnCl3 . (2 - HOC6H4CH - NC6H4OMe - 4') were determined by the X - ray diffraction analysis, The crystal belongs to monoclinic system, with a = 1.4661 (3)nm, b = 0.9307 (2)nm, c = 1.7888 (4)nm, beta = 94.04 (3)degrees, V = 2.4348nm(3), D-c = 1.581mg/m(3), Z = 4, F(000) = 1160, mu = 1.405mm(-1), R = 0.0354, R-w = 0,0486, space group: P2(1)/c. The complexes exist as a discrete monomer. The tin atom has a distorted octahedral geometry due to intramolecular coordination of the carbonyl oxygen and the phenolic oxygen of the Schiff base ligands, The coordination number of tin atom is 6.

An investigation of the roles of surface aluminum and acid sites in the zeolite MCM-22

Ammonia adsorption studies reveal that the observed Lewis acidity in the zeolite MCM-22 is derived from at least two types of framework aluminum sites (Al(F)), that is, octahedral Al(F) and three-coordinate Al(F). Comparative ammonia or trimethylphosphine (TMP) adsorption experiments with MCM-22 confirm that octahedral Al species gives rise to the signal at delta(ISO) approximate to 0 in the (27)Al NMR spectrum; this is a superposition of two NMR signals from the different Al species on the water-re constructed zeolite surface. A sharp resonance assigned to framework Al reversibly transforms on ammonia adsorption to delta(ISO) (27)Al approximate to 55 from tetrahedral Al(F), while the broad peak is assigned to nonframework aluminium which results from hydrothermal treatment. This study also demonstrates the effectiveness of (27)Al magic angle spinning (MAS) and multiple quantum (MQ) MAS NMR spectroscopy as a technique for the study of zeolite reactions.

Structure and acidity of Mo/H-MCM-22 catalysts studied by NMR spectroscopy

A comprehensive study on physical and chemical properties of Mo/MCM-22 bifunctional catalysts has been made by using combined analytic and spectroscopic techniques, such as adsorption, elemental analysis, and Xe-129 and P-31 NMR of adsorbed trialkylphosphine oxide probe molecules. Samples prepared by the impregnation method with Mo loadings ranging from 2-10 wt.% have been examined and the results are compared with that obtained from samples prepared by mechanical mixing using MoO3 or Mo2C as agents. Sample calcination treatment is essential in achieving a well-dispersed metal species in Mo/MCM-22. It was found that, upon initial incorporation, the Mo species tend to inactivate both Bronsted and Lewis sites locate predominantly in the supercages rather than the 10-membered ring channels of MCM-22. However, as the Mo loading exceeds 6 wt.%, the excessive Mo species tend to migrate toward extracrystalline surfaces of the catalyst. A consistent decrease in concentrations of acid sites with increasing Mo loading < 6 wt.% was found, especially for those with higher acid strengths. Upon loading of Mo > 6 wt.%, further decreases in both Bronsted and Lewis acidities were observed. These results provide crucial supports for interpreting the peculiar behaviors previously observed during the conversion of methane to benzene over Mo/MCM-22 catalyst under non-oxidative conditions, in which an optimal performance was achieved with a Mo loading of 6 wt.%. The effects of Mo incorporation on porosity and acidity features of the catalyst are discussed. (C) 2004 Published by Elsevier B.V.

Reactive compatibilization of LLDPE/PS blends with a new type of Lewis acid as catalyst

The reactive compatibilization of LLDPE/PS (50/50 wt%) was achieved by Friedel-Crafts alkylation reaction with a combined Lewis acids (Me3SiCl and InCl3 center dot 4H(2)O) as catalyst. The graft copolymer at the interface was characterized by Fourier transform infrared spectroscopy and the morphology of the blends was analysized by scanning electron microscopy. It was found that the combined Lewis acids had catalytic effect on Friedel-Crafts alkylation reaction between LLDPE and PS, and the catalytic effect was maximal when the molar ratio of InCl3 center dot 4H(2)O to Me3SiCl was 1:5. The graft copolymer LLDPE-g-PS was formed via the F-C reaction and worked as a tailor-made compatibilizer to reduce the interfacial tension. The mechanical properties of reactive blend with combined Lewis acids as catalyst was notably improved compared to that of physical LLDPE/PS blend and serious degradation had been decreased compared to the reactive blend system with AlCl3 as catalyst; we interpreted the above results in term of acidity of combined Lewis acids.

NMR study on the acidity of TS-1 zeolite

The acidic properties of TS-1 and Silicalite-I zeolites have been investigated by the solid-state MAS NMR technique capable of in situ sample pretreatment. As shown by a combination of the P-31 MAS NMR and H-1 MAS NMR techniques with trimethylphosphine, not only Bronsted acid sites but also Lewis acid sites exist in the TS-1 zeolites. Moreover, TS-1 zeolite is more acidic compared with Silicalite-1. The H-1, Si-29 MAS NMR spectra and the resonance related to Bronsted acid species in the P-31 MAS NMR spectra demonstrate clearly that the presence of titanium in the framework results in the formation of a new hydroxy group, titanols, which is more acidic than silanols of Silicalite-1. The P-31 MAS NMR measurements also illustrate convincingly the existence of at least two different Lewis acid species on the TS-1 zeolites. The conversion of propylene oxide into methoxypropanol catalyzed by TS-1 or Silicalite-I zeolite in methanol solution as a test reaction has also been described. With the increase of titanium in zeolite, TS-1 appears to have a higher activity during the reaction of propylene oxide to methoxypropanol.

Co-expression of CD173 (H2) and CD174 (Lewis Y) with CD44 suggests that fucosylated histo-blood group antigens are markers of breast cancer-initiating cells

Histo-blood group antigens CD173 (H2) and CD174 (Lewis Y) are known to be developmentally regulated carbohydrate antigens which are expressed to a varying degree on many human carcinomas. We hypothesized that they might represent markers of cancer-initiating cells (or cancer stem cells, CSC). In order to test this hypothesis, we examined the co-expression of CD173 and CD174 with stem cell markers CD44 and CD133 by flow cytometry analysis, immunocytochemistry, and immunohistochemistry on cell lines and tissue sections from breast cancer. In three breast cancer cell lines, the percentage of CD173(+)/CD44(+) cells ranged from 17% to > 60% and of CD174(+)/CD44(+) from 21% to 57%. In breast cancer tissue sections from 15 patients, up to 50% of tumor cells simultaneously expressed CD173, CD174, and CD44 antigens. Co-expression of CD173 and CD174 with CD133 was also observed, but to a lesser percentage. Co-immunoprecipitation and sandwich ELISA experiments on breast cancer cell lines suggested that CD173 and CD174 are carried on the CD44 molecule. The results show that in these tissues CD173 (H2) and CD174 (LeY) are associated with CD44 expression, suggesting that these carbohydrate antigens are markers of cancer-initiating cells or of early progenitors of breast carcinomas.

Impacts of Choerospondias axillaris growth on acidity of Udic Ferrosols in subtropical China

Changes in acidity of Udic Ferrosols, caused by growth of Choerospondias axillaris (Roxb.) Burtt et Hill, in comparison to wild grass, were investigated for pH distribution in the soil profile, exchangeable acidity, and cation status in the soil leachate of a simulated leaching experiment. Soils were sampled in profiles at 5 cm intervals to a depth of 100 cm. In the 1.5-60 cm layer the soils with 10-year old C. axillaris had significantly lower pH (P < 0.05), with the largest difference being 0.41: and in the 25-75 cm soil depths, especially in the 30-55 cm layer, the soils had a significantly higher exchangeable acidity, ranging 1.93 to 3.02 cmol(c) kg(-1). There was also higher aluminum, potassium, and sodium contents in the soil leachate under C. axillaris than with wild grasses. This suggested that the growth of C. axillaris accelerated acidification of Udic Ferrosols and promoted soil clay mineral weathering.

Lewis酸引发的LLDPE/PS共混体系的原位反应增容及其结构与性能研究

本文以单组分和双组分Lewis酸为催化剂，采用反应加工的方法，制备了原位反应增容的线性低密度聚乙烯/聚苯乙烯共混物（LLDPE/PS），并对原位反应增容的机理、增容体系的结构性能以及Lewis酸对共混组分的降解作用进行了系统研究。 以FTIR和NMR为手段、二甲苯为模拟化合物，确认LLDPE/PS共混体系在Lewis酸为催化剂作用下发生了LLDPE与PS的接枝反应，LLDPE接枝在PS苯环的对位上。形成的原位接枝共聚物对体系起增容作用。 使用溶剂抽提、SEM、DMA、流变和DSC等手段对以单组分Lewis酸AlCl3 为催化剂的LLDPE/PS共混物的结构性能进行了研究。从溶剂抽提前后的重量比计算了接枝物的含量。催化剂用量较低时体系中的接枝物含量随AlCl3的增加而提高，随着AlCl3进一步增加，接枝物含量不会增加反而下降，发现AlCl3导致均聚物的降解。研究结果表明，共混体系中加入适量的AlCl3催化剂后，分散相尺寸减小，分布均匀，储能模量增加，低频区的复数黏度升高。但AlCl3用量过高时使共混物的分散相尺寸增加，分布均匀度下降，储能模量和复数黏度降低。以GPC为手段研究了单组分 Lewis酸AlCl3对共混组分的降解作用，发现对PS的降解作用显著。 由于单组分Lewis酸催化剂会导致共混组分降解，使共混体系的物理机械性能变劣，为此，我们在LLDPE/PS共混物中引入了双组分Lewis酸催化剂（Me3SiCl、InCl3•4H2O）。结果表明双组分Lewis酸催化剂不但能够催化LLDPE和PS的原位接枝反应，获得高性能的LLDPE/PS合金材料，而且不会引发共混组分PS的降解。在催化剂用量固定时，采用双组分催化剂时共混物的拉伸强度随着LLDPE含量的增加几乎保持不变，但冲击强度有十分明显的提高。对比了加入催化剂前后共混物形貌的变化，增容后的共混物中分散相粒子尺寸显著降低，证明了双Lewis酸良好的催化性能。 对以双Lewis酸为催化剂的共混物的流变行为和结晶行为进行了研究。随着催化剂的加入，两相之间的相互作用增强，因此共混物的复数黏度，储能模量和损耗模量都有不同程度的提高。增容后的LLDPE相区变小，因而在冷却过程中出现不同程度的分步结晶现象。 对单组分和双组分Lewis酸催化剂原位反应增容LLDPE/PS共混体系的机理进行了探讨。机理为Friedel-Crafts烷基化反应。在采用单组分Lewis酸催化剂时， AlCl3与体系中含有的微量水等杂质发生反应，形成一个复合物，然后进一步与聚乙烯中的不饱和的双键发生反应形成碳正离子，并攻击LLDPE分子链从而形成大分子的碳正离子LLDPE+，而这些LLDPE+则通过电子的重排而发生剪切断裂。在催化剂的存在下，这些断裂的LLDPE片断取代PS中的苯环上的质子而发生接枝反应，从而形成LLDPE-g-PS共聚物。采用双组分Lewis酸催化剂时，首先发生双Lewis酸的耦合；耦合后的Lewis酸与水等杂质反应生成复合物，然后与非饱和的LLDPE分子反应生成初级碳正离子；初级碳正离子进攻LLDPE主链，生成较大的碳正离子；LLDPE+碳正离子取代PS苯环对位的质子而生成接枝共聚物。