小麦抗白粉病新基因PmCD1和抗条锈病基因YrCD的鉴定及分子标记筛选

本研究对自育小麦白粉病抗源“07鉴126”和条锈病抗源CD1437、CD0534-5进行抗性遗传分析和微卫星引物的筛选，建立了与PmCD1和YrCD抗病基因连锁的SSR分子标记，主要研究结果如下： 1.小麦白粉抗源“07鉴126”抗白粉病基因的鉴定和分子标记的建立 品系“07鉴126”对我国目前白粉菌强优势生理小种E09、E11和其它多种小种表现免疫或高度抵抗。Pm-sus是07鉴126的自然突变感病株。利用“07鉴126”和Pm-sus的F2抗病性分离群体进行抗条锈病性遗传分析和分子标记定位，结果表明，“07鉴126”的白粉抗性为显性单基因控制的全生育期抗性，暂命名为PmCD1；并筛选到了与PmCD1共分离的显性SSR分子标记Xbarc183。系谱分析和分子标记分析表明PmCD1来源于荆州黑麦。抗谱分析表明PmCD1不同于已知的黑麦抗白粉基因，是一个新的抗白粉病基因。Xbarc183这一分子标记的建立为PmCD1的分子标记辅助选择和抗病基因累加提供了方便。 2.小麦条锈抗源CD1437抗条锈病基因的鉴定和分子标记的建立 利用对优势条锈菌小种条中32免疫的小麦品系CD1437及其自然突变感病株Yr-sus杂交构建F2、F3抗病性分离群体。抗条锈病性遗传分析结果显示，1437的抗条锈性为显性单基因控制的全生育期抗性，该基因暂命名为YrCD。SSR分析发现，位于1B染色体上的7个SSR标记Xcfd65、Xgwm11、Xgwm18、Xbarc187、Xwmc406、 Xwmc419、Xwmc216依次分布在YrCD的一侧，与YrCD的遗传距离在1.7 cM至9.2 cM。YrCD和YrCH42的等位性分析显示二者可能为等位基因。YrCD和Yr24、Yr26的抗谱相似。系谱分析和分子标记分析表明贵农20是YrCD的供体。本研究推测YrCD、Yr24、Yr26和YrCH42可能是等位基因，并推测Yr-sus是缺失突变体。 3. 小麦条锈抗源CD0534-5抗条锈病基因的鉴定 利用对条中32免疫的小麦抗条锈病品系CD0534-5及其感病重组自交系CD0534-4建立F2抗病性分离群体。抗条锈病性遗传分析表明，CD0534-5的条锈抗性由两对独立的显性主效基因控制。用BSK法分析，发现其中一对基因与SSR分子标记Xgwm11、Xgwm18、Xwmc128、Xwmc419连锁，该基因是来源于贵农20的YrCD。另一抗性基因来源贵农19，是极有利用价值的未知抗性基因。 This study focused on the investigation and identification of a novel powdery mildew resistant gene PmCD1 in wheat lines 07jian126 and stripe rust resistant gene YrCD in wheat lines CD1482 and CD0534-5, and screened SSR markers tightly linked to them. The main results were as follows: 1.Identification and SSR markers screening of a novel powdery mildew PmCD1 in wheat line 07jian126. Using a Pm resistant wheat line 07jian126 and its Pm susceptible mutant, a F2 population was constructed. Pedigree and genetic analyses indicated that the Pm resistance in 07jian126 was tranderred from rye (Secale cereale L.) cv. Jinzhou and was controlled by a single dominant gene. Differential test using 21 Bgt isolates revealed that the Pm resistant gene in 07jian126 is novel and was temporarily designated as PmCD1. A dominant SSR marker Xbarc183/130 bp was found co-segregated with PmCD1 in the F2 population. The diagnostic band of Xbarc183/130 bp co-segregating with PmCD1 could be used as an ideal marker in marker-assisted-selection during wheat breeding program. 2. Identification and SSR markers mapping of yellow rust resistant gene YrCD in wheat line CD1437. Wheat line CD1437 was highly resistant to predominant Chinese stripe rust race CYR32 at both seedling and adult stages. A F2 population was developed from the cross of CD1437 and its Yr susceptible mutant Yr-sus. Genetic analysis indicated line CD1437 contains a single dominant gene, temporarily designated YrCD. Seven SSR markers on the chromosome 1BS including Xcfd65, Xgwm11, Xgwm18, Xbarc187, wmc406, Xwmc419and Xwmc216 were close linked to YrCD with a genetic dsitance 1.7 cM to 9.2 cM. YrCD came from wheat cultivar Guinong 20. Allelic test of CD1437 and Chinese cultivar Chuanmai 42 indicated that YrCD and YrCH42 were allelic. Reaction patterns of YrCD and Yr24, Yr26 to 21 PST isolates were the same. These results suggested that YrCD and Yr24, Yr26, YrCH42 might be allelic. 3.Detection and identification of yellow rust resistance genes in wheat line CD0534-5 Wheat line CD0534-5 was highly resistant to predominant Chinese stripe rust race CYR32, while its recombinant inbred line CD0534-4 was susceptible. Genetic analysis with a F2 population developed from the cross of CD0534-5 and CD0534-4 indicated line CD0534-5 contains two independent dominant genes. Four SSR markers on the chromosome 1BS including Xgwm11, Xgwm18, Xwmc128, Xwmc419 were found to linked with one gene in CD0534-5. According the locations of makers and pedigree, this gene in CD0534-5 was YrCD, from cultivar Guinong 20. Another resistant gene was from cultivar Guinong 19, different with those genes on 1B such as Yr10, Yr15, Yr5 etc, was a valuable resistant gene in wheat breeding.

水稻同源四倍体高代自交系农艺性状分析及遗传差异研究

课题组在不断地创制新的同源四倍体材料的同时，连续多年以提高结实率为目的培育、筛选自交系材料，已获得自交繁殖十二年的高代自交系材料。相对于诱导创制初期，材料表现出的结实率低，同种系单株间的差异较大；高代材料已表现出较显著的结实率提升和较一致的农艺性状表型。 本实验选取课题组多年培育的同源四倍体水稻高代自交系材料，通过形态学、农艺性状和细胞遗传学比较，研究水稻同源四倍体与二倍体之间的异同。结果显示，所有同源四倍体材料的染色体组成均为2N=4X=48，花粉母细胞(PMC)减数分裂行为较正常，99%以上的染色体都能在减数分裂中期I（MI）发生联会、配对，形成四价体和二价体，这与理论染色体组构成相符。在减数分裂过程中，结实率较高的材料染色体异常现象较少而结实率较低的材料染色体异常现象较严重。统计分析表明，二价体和四价体的比例对结实率没有显著影响，但是三价体的数目对结实率有一定影响。这一结果表明了结实率和细胞减数分裂行为可能存在相关性，同源四倍体的减数分裂行为为筛选高结实率的同源四倍体种系提供了依据。 然后，对同源四倍体水稻高代自交系材料进行农艺性状和品质性状的统计与分析。主要针对结实率、每穗实粒数、有效分蘖和穗长等主要农艺性状，以及直链淀粉含量这一重要的品质性状进行统计。将统计结果与1996年诱导加倍的初代材料的数据相对比分析，结果显示所有材料经过多代选育培养，其农艺性状已经有了较显著的提高，同时同源四倍体材料的农艺性状稳定性也有了较显著的提升。如结实率的提高幅度较大，所有材料的平均结实率均显著高于加倍初代，而同种材料不同单株间的结实率差异也显著地减少，变异系数（CV）的平均值由1996年的41.15%减少到了2008年的28.81%。其他重要农艺性状也有不同程度的改良，种内变异系数也相应地降低。此外，实验测量了同源四倍体材料和来源二倍体材料的直链淀粉含量。分析结果显示，部分材料的直链淀粉含量与二倍体亲本产生了较显著的差异，这可能是诱导加倍过程中的遗传变异造成的；同源四倍体材料的种内变异系数（CV）平均值由1996年的6%下降到了2008年的3.88%，显示出在品质性状方面，同源四倍体材料的遗传稳定性也有较显著的增加。同源四倍体材料农艺性状经过多年的选育，表现出一定的提升，同时，经过多年自交纯化，所有材料种系内的性状差异逐渐缩小，说明同源四倍体水稻的遗传稳定性随着自交纯化而增强，这为同源四倍体水稻的进一步选育打下了良好的基础。 最后，通过测量连续两年的自交系材料的遗传多态性，分析材料间遗传差异和种群遗传结构，深入研究连续两代材料间的遗传差异，研究同源四倍体水稻与二倍体材料遗传稳定性之间的差异。实验采用18对SSR微卫星标记对连续两代15个材料，共94份样本进行差异分析。通过扩增条带长度多态性分析，计算不同材料以及同种材料不同世代间的遗传距离，构建同源四倍体和二倍体水稻的分子指纹库，并绘制聚类图。结果显示，同源四倍体和二倍体不同材料间的遗传差异比较大，遗传距离处于0.4757至0.2816之间；而相同品种不同世代材料间的遗传差异较小，但也表现出一定的遗传差异。同种同源四倍体材料不同世代间的遗传差异比二倍体材料更大，两代四倍体材料间遗传距离处于0.1359至0.0485之间；而两代二倍体材料间的遗传距离处于均小于0.0388。结果表明，同源四倍体水稻高代材料具有一定的遗传稳定性，但与来源二倍体材料相比，其世代间的遗传变异性仍然较强。这种结果说明，经过多代的自交纯化培育，同源四倍体水稻材料能够建立起相对稳定的遗传结构，同时，其强于二倍体亲本的变异性有能够为新品种的选育，农艺性状、品质性状的改良提供一定的遗传基础。此外，分析结果表明通过分子标记辅助检验，水稻材料间的遗传多态性能够有效地区分不同的品种，这为水稻品种的分子鉴定提供了一定的依据。 本研究从细胞学鉴定，农艺性状统计分析以及分子标记辅助聚类分析多方面地对同源四倍体水稻高代系进行了研究，对探究同源四倍体水稻的遗传规律，进一步揭示其遗传特性、农艺性状的遗传构成，为进一步选育优质的多倍体水稻提供了一定的理论依据。 This group insists on creating new Autotetraploid Rice (Oryza sativa L.) materials, while improving the seed-setting of them for many years, cultivated and selected the inbred line materials, has obtained the high generation inbred lines after twelve years cultivation. Compared to the early induced materials, which shown the low seed setting, and the large difference between the different plants in the same germ-line; the high generation materials have shown significant improvement in seed setting and more uniform phenotype agronomic traits. The autotetraploid rice high generation inbred lines material, which has been cultivated for more than 12 years, was chose in this experiment. The similarities and differences between autotetraploid and diploid rice was studied through morphological, agronomic and cytogenetic ways. The results showed that all the chromosome of autotetraploid materials are composed of 2N=4X=48, the pollen mother cells (PMC) meiosis behavior is normal, more than 99% chromosomes in metaphase I(MI) were federated and paired to form tetravalents or bivalents, which constitutes a consistent theory of genome. In the meiosis process, the material with a higher seed setting showed less chromosome abnormal than the material whose seed setting is lower. However, statistical analysis showed that the bivalent and tetravalent rate had no significant impact on seed setting, but the number of trivalent had a certain impact on seed setting. The result shows that the seed setting may be related to the meiosis behavior, which provides a basis to cultivate new autotetraploid germ line with high seed setting through the meiotic behavior. Furthermore, the agronomic and quality traits of autotetraploid rice high generation inbred material were statistically analyzed. The statistically analysis was focused on major agronomic traits such as: seed setting, grains per panicle, effective tillers and panicle length, as well as the important quality trait amylose content. The statistic data was compared with the data in 1996, when the first induced generation of autotetraploid material, and the result shows that after a multi-generation breeding, the agronomic traits has been significantly improved in all the materials, while the stability of agronomic traits also significant upgraded. For instant, the seed setting increased significantly, the average seed setting of all materials was significantly higher than the first induced generation, and the differences between different plants in the same species also significantly reduced, the average of the coefficient of variation (CV) was reduced from 41.15% in 1996 to 28.81% in 2008. Other important agronomic traits had improved in different degrees; the coefficient of variation within species is also reduced accordingly. In addition, the amylose content of autotetraploid and diploid materials was measured in this experiment. The results shows that the amylose content of some of the material differed from diploid parents significantly, it may caused by the genetic change during the inducing, autotetraploid materials intra-specific coefficient of variation (CV) average reduced from 6% in 1996 to 3.88% in 2008, shows that this is a significant increase of quality traits stability in autotetraploid rice. Agronomic traits of autotetraploid material shows some improvement after years of breeding, at the same time, after years of purification, all material within the germ-line gradually narrow the differences in traits indicates that autotetraploid rice genetic stability was enhanced, which laid a good foundation for the further autotetraploid rice breeding. Finally, this experiment studied the genetic differences between materials of two generations and researched the difference of genetic stability between diploid and autotetraploid rice materials through investigating the genetic polymorphism, genetic differences between materials and population genetic structure of inbred line materials of two consecutive years.18 pairs of SSR microsatellite markers for 15 materials of two generations were used in this experiment, and the total of 94 samples were analyzed. Through the amplification length polymorphism analysis of different materials and materials in different generations, the genetic distance between materials and generations was analyzed, a diploid and autotetraploid rice molecular fingerprint database and map rendering cluster were constructed. The result shows that the genetic distance is between 0.4757 to 0.2816 among different autotetraploid and diploid materials; the genetic distance between different generations of same species was less, but also shows a certain degree of genetic differences. The inter-generational genetic differences of autotetraploid materials were greater than of the diploid materials, which are 0.1359 to 0.0485 as the genetic distance; comparing with the 0.0388 of diploid materials. The result shows that high generation inbred autotetraploid rice material has a certain genetic stability, but the genetic variation between generations is still strong comparing with the source diploid materials. It indicates that, after many generations of purification cultivation, autotetraploid rice materials established a relatively stable genetic structure, at the same time, stronger variability than its diploid parents are useful in the breeding of new varieties, provides a genetic foundation to the agronomic and quality traits improvement. In addition, the analysis result shows that the through the molecular marker-assisted testing, rice genetic polymorphism between materials can effectively distinguish different species, provides a certain basis for molecular identification of varieties of rice. A series of investigation such as cytological identification, statistical analysis of agronomic traits, molecular marker-assisted cluster analysis was applied in this experiment to research genetic pattern of autotetraploid rice high generation inbred lines, revealed the genetic characteristics and the genetic composition of agronomic traits, provides a theoretical basis for the further selection of high quality autotetraploid rice.

卷烟厂制丝线生产过程建模与计划仿真技术研究

本课题结合国家863高技术计划“面向流程与混合行业的可配置MES产品及行业解决方案”项目2007AA040702和“吉林省延吉卷烟厂制丝生产线生产管理系统”项目选题进行研究与软件开发。是项目研究的主要内容之一，本人主要负责仿真模型建立模块中各项功能的设计与开发。 烟草行业作为一个特殊的行业，它面临着来自市场和国家计划的双重压力，面对这些压力，为了更好的应对市场，烟草企业采用制造执行系统(Manufacturing Execution System，MES)来对卷烟的整个生产过程进行管理。用于完成制丝的制丝生产线是烟草企业最重要的环节，它的工作性能直接决定了卷烟的质量及生产效益。其中，计划的合理性程度以及具体的执行情况是影响其工作性能的关键因素。当前制丝线MES系统的计划调度模块是通过基于规则的调度策略来获得调度方案以对制丝线的生产进行管理，这些规则是根据实际的经验从生产现场抽取得到，在一定程度上保证了计划调度的合理性，但不能保证获得符合实际情况的最优的调度方案，并且在此过程中没有考虑异常事件发生时的应对措施，由于这种调度策略的局限性以及生产线中异常事件发生的随机性，当前制丝线MES系统的计划调度模块已无法很好的管理制丝线的生产。 为解决上述问题，本文在对卷烟厂制丝线生产过程进行建模的基础上，提出并开发了制丝线的计划仿真系统。通过仿真模拟整个制丝生产过程，不仅能确定计划制定的合理性程度，还能预测异常事件发生时对整个计划执行的影响程度，进而采取相应的措施来保证生产的效率。本文的主要研究工作如下： 1、概述了当前主要的生产过程建模方法和离散事件仿真方法，对每种方法的特点进行了概括和总结，在此基础上提出了本文所采用的建模和仿真方法。其中的仿真方法较已有方法在程序实现上做了改进。 2、在对现有的烟草企业制丝线生产过程进行分析的基础上，采用面向对象的建模方法对其进行建模，为生产计划仿真提供基础。 3、设计了生产计划仿真系统的整体框架，对各功能模块设计、系统设计及其实现技术作了细致的阐述。 4、开发实现了该计划仿真系统并针对延吉卷烟厂新厂区制丝线进行计划仿真，分析表明，仿真效果良好。

Establishment of a normal medakafish spermatogonial cell line capable of sperm production in vitro

Spermatogonia are the male germ stem cells that continuously produce sperm for the next generation. Spermatogenesis is a complicated process that proceeds through mitotic phase of stem cell renewal and differentiation, meiotic phase, and postmeiotic phase of spermiogenesis. Full recapitulation of spermatogenesis in vitro has been impossible, as generation of normal spermatogonial stem cell lines without immortalization and production of motile sperm from these cells after long-term culture have not been achieved. Here we report the derivation of a normal spermatogonial cell line from a mature medakafish testis without immortalization. After 140 passages during 2 years of culture, this cell line retains stable but growth factor-dependent proliferation, a diploid karyotype, and the phenotype and gene expression pattern of spermatogonial stem cells. Furthermore, we show that this cell line can undergo meiosis and spermiogenesis to generate motile sperm. Therefore, the ability of continuous proliferation and sperm production in culture is an intrinsic property of medaka spermatogonial stem cells, and immortalization apparently is not necessary to derive male germ cell cultures. Our findings and cell line will offer a unique opportunity to study and recapitulate spermatogenesis in vitro and to develop approaches for germ-line transmission.

Fusion energy-production from a deuterium-tritium plasma in the jet tokamak

Describes a series of experiments in the Joint European Torus (JET), culminating in the first tokamak discharges in deuterium-tritium fuelled mixture. The experiments were undertaken within limits imposed by restrictions on vessel activation and tritium usage. The objectives were: (i) to produce more than one megawatt of fusion power in a controlled way; (ii) to validate transport codes and provide a basis for accurately predicting the performance of deuterium-tritium plasmas from measurements made in deuterium plasmas; (iii) to determine tritium retention in the torus systems and to establish the effectiveness of discharge cleaning techniques for tritium removal; (iv) to demonstrate the technology related to tritium usage; and (v) to establish safe procedures for handling tritium in compliance with the regulatory requirements. A single-null X-point magnetic configuration, diverted onto the upper carbon target, with reversed toroidal magnetic field was chosen. Deuterium plasmas were heated by high power, long duration deuterium neutral beams from fourteen sources and fuelled also by up to two neutral beam sources injecting tritium. The results from three of these high performance hot ion H-mode discharges are described: a high performance pure deuterium discharge; a deuterium-tritium discharge with a 1% mixture of tritium fed to one neutral beam source; and a deuterium-tritium discharge with 100% tritium fed to two neutral beam sources. The TRANSP code was used to check the internal consistency of the measured data and to determine the origin of the measured neutron fluxes. In the best deuterium-tritium discharge, the tritium concentration was about 11% at the time of peak performance, when the total neutron emission rate was 6.0 × 10¹⁷ neutrons/s. The integrated total neutron yield over the high power phase, which lasted about 2 s, was 7.2 × 10¹⁷ neutrons, with an accuracy of ±7%. The actual fusion amplification factor, Q_DT was about 0.15

Production cross-section of Ra-230 in the reaction of 60 MeV/u O-18 ions with U-238

A thick natural uranium target was bombarded with a 60 MeV/u O-18 beam. The neutron-rich isotope Ra-230 as the target residue was produced through the multinucleon transfer reaction (U-238-4p-4n). The barium and radium fraction as BaCl2 precipitate were radiochemically separated first from the mixture of uranium and reaction products. Then, the radium fraction was separated from BaCl2 precipitate by using cation exchange technique. The gamma-ray spectra of the Ra fraction were measured using an HPGe detector. The production cross sections of Ra-230 were obtained by a combination of the radiochemical separation technique and off-line gamma-ray spectroscopy. The cross section of Ra-230 has been determined to be 66 +/- 20 mu b.

Cultivation of the brown alga Sargassum horneri: sexual reproduction and seedling production in tank culture under reduced solar irradiance in ambient temperature

As a large conspicuous intertidal brown alga, individuals of Sargassum horneri can reach a length of more than 7 m with a fresh weight of 3 kg along the coasts of the Eastern China Sea. The biomass of this alga as a vital component in coastal water ecology has been well documented. In recent years, a steady disappearance of the algal biomass along the once densely populated coastal areas of the Eastern China Sea has drawn attention in China. Efforts have been made to reconstruct the subtidal algal flora or even to grow the alga by use of long-lines. As part of the efforts to establish an efficient technique for producing seedlings of S. horneri, in this investigation a series of culture experiments were carried out in indoor raceway and rectangular tanks under reduced solar irradiance at ambient temperature in 2007-2008. The investigation demonstrated that: (1) sexual reproduction of S. horneri could be accelerated in elevated temperature and light climates, at least 3 months earlier than in the wild; (2) eggs of S. horneri had the potential to be fertilized up to 48 h, much longer than that of known related species; (3) suspension and fixed culture methods were both effective in growing the seedlings to the long-line cultivation stage; and (4) the life cycle of S. horneri in culture could be shortened to 4.5 months, thus establishing this alga as an appropriate model for investigating sexual reproduction in dieocious species of this genus.

Production of a base population and its responses to F-1 selection in the bay scallop, Argopecten irradians irradians Lamarck (1819)

A base population of the bay scallop, Argopecten irradians irradians Lamarck, was produced by crossing two cultured bay scallop populations. After 1 year of rearing, the top 10% truncation selection of the top 10% (i=1.755) was carried out in the base population of about 1300 adults. A control parental group with a an identical number to the select parental group was randomly selected from the entire population before isolation of the select parental group. The result showed that, at the larval stage, the growth rate of larvae in the selected line was significantly higher than that of the control (P < 0.05), and that the genetic gain was 6.78%. Owing to the lower density of control at the spat stage, the mean shell length of the control line was larger than that of the select line at day 100. When the same density was adjusted between two lines in the grow-out stage (from day 100 to 160), the daily growth rate of the selected line was significantly higher than that of the control line (P < 0.05). Survival of the select line was significantly larger than that of the control line in the grow-out stage. In conclusion, the results obtained from this experiment indicate that selective breeding from a base population with a high genetic diversity established by mass spawning between different populations appears to be a promising method of genetic improvement in bay scallop, A. irradians irradians Lamarck.