济阳坳陷陡坡带砂砾岩体发育特征及油气成藏规律研究

Jiyang depression is one of the most important petroleum production basins in China. The petroleum pools, found easier, have been densely explored and developed. At present, the subtle traps are becoming the main exploring aims. A lot of Tertiary sand-conglomerate body petroleum pools, as one of the important subtle pools, have been discovered recently. It is necessary and urgent to study deeply the developing characteristics and petroleum pool distribution of Tertiary sand-conglomerate bodies in Jiyang Depression. The present dissertation has concluded the main developing characteristics of the Tertiary sand-conglomerate bodies in Jiyang Depression, and studied the sand-conglomerate bodies in Chengnan Fault Zone in detail. Depending on the synthesized studies of geology, geophysics and logging data, the following conclusions have been arrived at. Four criterion layers in Member 3 of Shahejie Formation, according to the depositional cycle analyses, have been established for the subdivision of different layers of sand-conglomerate bodies and the correlation of different sand-conglomerate bodies. It indicated that the alluvial delta, delta-fan, alluvial fan, shallow water fan , deep water turbidite , fan-front turbidite are the six kinds of sand-conglomerate bodies, which have been distinguished in Jiyang Depression with the study of genetic types, characteristics and distribution of sand-conglomerate bodies. The shallow water fan, steep slope deep water turbidite and fan-front turbidite were the main types of sand-conglomerate bodies developed in Chengnan steep slope. Their identification and distribution have been described in detail. The development and distribution of sand-conglomerate bodies were resulted by fault depressing, palco-climate change and channel or trough on the uplift. The fault depressing is the most important-factor to the episodic developing of sand-conglomerate bodies. An episodic developing genetic mode has been established by the contrast analyses between episodic fault depressing and climate change cycles. The hydrocarbon accumulation in the sand-conglomerate bodies in the steep slope was correlated with fan types, depositional phases, fault depressing and diagenesis. Sand-conglomerate wedge out (include up-oblique and onlap), lithological wedge out, mud screen (for anticline), fault plugging (by mud opposite sand, mud daubing) are the 5 possible mechanisms of oil accumulation. Lithological pool, stratigraphic pool and tectonic pool and lithologic-tectonic complex pool, and 9 subtypes of petroleum pools have been detected. It is easy for different pools to be combined as a complex reservoir, which was distributed along the syn-depositional fault slopes. The sand-conglomerate bodies in deep sag were usually evaluated as pore zone for hydrocarbon accumulation before. In fact, they are potential. Because of fan-front turbidite sands were especially developed in these zones, the sands have a close connection with the oil mud, and lithological pools can be expected to find in these zones. Chengnan fault slope was main channel of oil migration, and mud screen is the principle key for the oil accumulation in the sand-conglomerate bodies. If there was no mud between the sand-conglomerate bodies or on the top of sand-conglomerate bodies, the sand-conglomerate bodies would connect each other and there would be no dense material to hold up the oil migration along the slope. As the sand-conglomerate bodies could not been taken as a screen, the mud screen is the key for developing pool in this slope. According to this principle, about 6 potential traps, such as C915 block, C913 block, C916 block, south of Y109 well block, Y104 block and Y153 block, were selected for exploration and development.

地震波场延拓+菲涅尔体叠加方法及成像效果

In the increasingly enlarged exploration target, deep target layer(especially for the reservoir of lava) is a potential exploration area. As well known, the reflective energy becomes weak because the seismic signals of reflection in deep layer are absorbed and attenuate by upper layer. Caustics and multi-values traveltime in wavefield are aroused by the complexity of stratum. The ratio of signal to noise is not high and the fold numbers are finite(no more than 30). All the factors above affect the validity of conventional processing methods. So the high S/N section of stack can't always be got with the conventional stack methods even if the prestack depth migration is used. So it is inevitable to develop another kind of stack method instead. In the last a few years, the differential solution of wave equation was hold up by the condition of computation. Kirchhoff integral method rose in the initial stages of the ninetieth decade of last century. But there exist severe problems in it, which is are too difficult to resolve, so new method of stack is required for the oil and gas exploration. It is natural to think about upgrading the traditionally physic base of seismic exploration methods and improving those widely used techniques of stack. On the other hand, great progress is depended on the improvement in the wave differential equation prestack depth migration. The algorithm of wavefield continuation in it is utilized. In combination with the wavefield extrapolation and the Fresnel zone stack, new stack method is carried out It is well known that the seismic wavefield observed on surface comes from Fresnel zone physically, and doesn't comes from the same reflection points only. As to the more complex reflection in deep layer, it is difficult to describe the relationship between the reflective interface and the travel time. Extrapolation is used to eliminate caustic and simplify the expression of travel time. So the image quality is enhanced by Fresnel zone stack in target. Based on wave equation, high-frequency ray solution and its character are given to clarify theoretical foundation of the method. The hyperbolic and parabolic travel time of the reflection in layer media are presented in expression of matrix with paraxial ray theory. Because the reflective wave field mainly comes from the Fresnel Zone, thereby the conception of Fresnel Zone is explained. The matrix expression of Fresnel zone and projected Fresnel zone are given in sequence. With geometrical optics, the relationship between object point in model and image point in image space is built for the complex subsurface. The travel time formula of reflective point in the nonuniform media is deduced. Also the formula of reflective segment of zero-offset and nonzero offset section is provided. For convenient application, the interface model of subsurface and curve surface derived from conventional stacks DMO stack and prestack depth migration are analyzed, and the problem of these methods was pointed out in aspects of using data. Arc was put forward to describe the subsurface, thereby the amount of data to stack enlarged in Fresnel Zone. Based on the formula of hyperbolic travel time, the steps of implementation and the flow of Fresnel Zone stack were provided. The computation of three model data shows that the method of Fresnel Zone stack can enhance the signal energy and the ratio of signal to noise effectively. Practical data in Xui Jia Wei Zhi, a area in Daqing oilfield, was processed with this method. The processing results showed that the ability in increasing S/N ratio and enhancing the continuity of weak events as well as confirming the deep configuration of volcanic reservoir is better than others. In deeper target layer, there exists caustic caused by the complex media overburden and the great variation of velocity. Travel time of reflection can't be exactly described by the formula of travel time. Extrapolation is bring forward to resolve the questions above. With the combination of the phase operator and differential operator, extrapolating operator adaptable to the variation of lateral velocity is provided. With this method, seismic records were extrapolated from surface to any different deptlis below. Wave aberration and caustic caused by the inhomogenous layer overburden were eliminated and multi-value curve was transformed into the curve.of single value. The computation of Marmousi shows that it is feasible. Wave field continuation extends the Fresnel Zone stack's application.

Application of sample-and-hold circuits in the laser frequency-shifting

A new method of frequency-shifting for a diode laser is realized. Using a sample-and-hold circuit, the error signal can be held by the circuit during frequency shifting. It can avoid the restraint of locking or even lock-losing caused by the servo circuit when we input a step-up voltage into piezoelectric transition (PZT) to achieve laser frequency-shifting.