Morphology of head-to-tail poly(3-hexylthiophene) single crystals from solution crystallization

Single crystals of head-to-tail poly(3-hexylthiophene)s have been grown through the method of isothermal solution crystallization. Electron diffraction in combination with powder X-ray diffraction revealed the crystal structure, a = 1.52 nm, b = 3.36 nm, c = 1.56 nm and alpha = beta = gamma = 90 degrees.

Characterization of transgene integration pattern in F4 hGH-transgenic common carp (Cyprinus carpio L.)

The integration pattern and adjacent host sequences of the inserted pMThGH-transgene in the F4 hGH-transgenic common carp were extensively studied. Here we show that each F4 transgenic fish contained about 200 copies of the pMThGH-transgene and the transgenes were integrated into the host genome generally with concatemers in a head-to-tail arrangement at 4-5 insertion sites. By using a method of plasmid rescue, four hundred copies of transgenes from two individuals of F4 transgenic fish, A and B, were recovered and clarified into 6 classes. All classes of recovered transgenes contained either complete or partial pMThGH sequences. The class I, which comprised 83% and 84.5% respectively of the recovered transgene copies from fish A and B, had maintained the original configuration, indicating that most transgenes were faithfully inherited during the four generations of reproduction. The other five classes were different from the original configuration in both molecular weight and restriction map, indicating that a few transgenes had undergone mutation, rearrangement or deletion during integration and germline transmission. In the five types of aberrant transgenes, three flanking sequences of the host genome were analyzed. These sequences were common carp beta-actin gene, common carp DNA sequences homologous to mouse phosphoglycerate kinase-1 and human epidermal keratin 14, respectively.

Fixation of carbon dioxide into aliphatic polycarbonate, cobalt porphyrin catalyzed regio-specific poly(propylene carbonate) with high molecular weight

Cobalt porphyrin complex ((TPPCoX)-X-III) (TPP = 5, 10, 15, 20-Tetraphenylporphyrin; X = halide) in combination with ionic organic ammonium salt was used for the regio-specific copolymerization of propylene oxide and carbon dioxide. A turnover frequency of 188 h(-1) was achieved after 5 h, and the byproduct propylene carbonate was successfully controlled to below 1%, where the obtained poly(propylene carbonate) (PPC) showed number average molecular weight (M-n) of 48 kg/mol, head-to-tail content of 93%, and carbonate linkage of over 99%.

Carbon dioxide/propylene oxide coupling reaction catalyzed by chromium salen complexes

A series of chromium/Schiff base complexes N,N'-bis(salicylidene)-1,2-phenylenediamino chromium(III) X were prepared and employed for the alternating copolymerization of carbon dioxide with racemic propylene oxide in the presence of (4-dimethylamino)pyridine. The effect of the complex structure and reaction conditions on the catalytic activity, the poly(propylene carbonate)/cyclic carbonate (PPC/PC) selectivity, and the polymer head-to-tail linkages was examined. The experiments indicated that N,N'-bis(3,5-di-tert-butylsalicylidene)-1,2-phenylenediamino chromium(III) (NO3) exhibited the highest PPC/PC selectivity as well as polymer head-to-tail linkages and N,N'-bis(3,5-dichlorosalicylidene)-1,2-phenylenediimino chromiu(III) (NO3) possessed the highest catalytic activity among these chromium/Schiff base complexes. The structure of the produced copolymer was characterized by the IR, H-1 NMR, and C-13 NMR measurements.

Alternating copolymerization of carbon dioxide and propylene oxide by single-component cobalt salen complexes with various axial group

A series of single-component cobalt salen complexes, N,N'-bis(salicylidene)-1,2phenylenediamino cobaltIII X(X = Cl (1a), Br (1b), NO3 (1c), CF3COO (1d), BF4 (le), and N3 (If)) (SalphCoX), were prepared for alternating copolymerization of carbon dioxide and propylene oxide(PO) under mild condition. The axial anion X group of the SalenphCoX played important role in tailoring the catalytic activity, polymeric/cyclic carbonate selectivity, as well as stereochemistry of carbonate unit sequence in the polymer chain. SalenphCoX with an electron-withdrawing axial X group (complex 1c) was an ideal catalyst for the copolymerization of CO2 and PO to selectively produce polycarbonate with similar to 99% carbonate linkage and over 81% head-to-tail structure.

Extended-chain lamellar packing of poly(3-butylthiophene) in single crystals

We developed an approach, i.e. solvent-assist crystallization (SAC), for growing high quality single crystals of head-to-tail regio-regular poly(3-butylthiophene) (P3BT). By means of atomic force microscopy, electron diffraction and X-ray diffraction, we found that P3BT macromolecules formed lamella single crystals through gradient crystallization, and in the single crystals, molecules packed normal to the lamella with extended-chain conformation with alkyl side chains in the growth front during crystallization.

Syntheses and properties of soluble biphenyl-based polyimides from asymmetric bis(chlorophthalimide)s

A novel synthesis of asymmetric bis(chlorophthalimide)s (3,4-BCPIs) has been established. The polymerizations of them produced higher molecular weight (0.38-0.51 dL/g) polyimides containing biphenyl units than those of isomeric polymers derived from symmetric bis(chlorophthalimide)s (4,4'-BCPIs) and 3,3'-BCPIs. The distribution of the formed biphenyl units of head to tail, head to head, and tail to tail in the chain of the polymers was about 58.0:21.0:21.0, determined by C-13 NMR spectra of the polymers. The composition of model compounds, determined by HPLC, was well consistent with the 13C NMR spectrum result. Comparing with polymers derived from 4,4'-BCPIs and 3,3'-BCPIs, the polymers derived from 3,4-BCPIs showed better solubilities in N,N-dimethylacetamide (DMAc), N,N-dimethyl-formamide (DMF), and N-methylpyrrolinone (NMP). Flexible films could be cast from the polymer solution with the inherent viscosities of above 0.35 dL/g. The polymer derived from asymmetric bis(chlorophthimide)s gave the highest T-g among the isomeric polymers.

In situ electrochemical SERS studies on electrodeposition of aniline on 4-ATP/Au surface

The electrochemical polymerization of 0.01 M aniline in 1 M H2SO4 aqueous solution on roughened Au surface modified with a self-assembled monolayer (SAM) of 4-aminothiophenol (4-ATP) has been investigated by in situ electrochemical surface-enhanced Raman scattering spectroscopy (SERS). The repeat units and possible structures of the electrodeposited polyaniline (PANI) film were proposed; i.e., aniline monomer is coupled in head-to-tail predominately at the C-4 of aniline and amine of 4-ATP, and the thin PANI film is orientated vertically to substrate surface. Simultaneous Raman spectra during potential scanning indicate clearly that the ultrathin PANI film (in initial growth of the film) consists of semiquinone radical cation (IP+), para-disubstituted benzene (IP and IP+) and quinine diimine (NP) while it is oxidized, and without quinine diimine and semiquinone radical cation while reduced. Meanwhile, the results confirm that 4-ATP monolayer shows a strong promotion on the electrodeposition of aniline monomer, and a possible polymerization mechanism was proposed.

Copolymerization of CO2 and propylene oxide under rare earth ternary catalyst: design of ligand in yttrium complex

Copolymerization of carbon dioxide and propylene oxide was carried out employing (RC6H4COO)(3)Y/glycerin/ZnEt2 (R = -H, -CH3, NO2, -OH) ternary catalyst systems. The feature of yttrium carboxylates (ligand, substituent and its position on the aromatic ring) is of great importance in the final copolymerization. Appropriate design of substituent and position of the ligand in benzoate-based yttrium complex can adjust the microstructure of aliphatic polycarbonate in a moderate degree, where the head-to-tail linkage in the copolymer is adjustable from 68.4 to 75.4%. The steric factor of the ligand in the yttrium complex is crucial for the molecular weight distribution of the copolymer, probably due to the fact that the substituent at 2 and 4-position would disturb the coordination or insertion of the monomer, lead the copolymer with broad molecular distribution. Based on the study of ultraviolet-visible spectra of the ternary catalyst in various solvents, it seems that the absorption band at 240-255 nm be closely related to the active species of the rare earth ternary catalysts.

Poly(3-dodecylthiophenes) polymerized with different amounts of catalyst

The effect of the amount of the catalyst FeCl3, used during the direct oxidation polymerization, on the structure and properties of the obtained poly(3-dodecylthiophene) (P3DDT) was investigated in this paper. Such measurements as gel permeation chromatography (GPC), nuclear magnetic resonance (NMR) spectroscopy, thermal analysis, X-ray diffraction, infrared spectroscopy (FTIR) and ultraviolet-visible (W-vis) spectroscopy were applied. It is found that a suitable addition of FeCl3 can contribute to generate a P3DDT with greater percentage of head-to-tail head-to-tail (HT-HT) linkages, which are generally favored. The reduction of the other linkage defects helps to lengthen conjugation length, thus leading to more orderly chain packing. (C) 2000 Elsevier Science S.A. All rights reserved.

Synthesis, electrical properties and crystal structure of a new radical-ion salt based on pi-extended bis(TTF) and a Keggin heteropolymolybdate

By electrocrystallization of 2,6-[4,5-bis(n-butylsulfanyl)-1,3-dithiol-2-ylidene]-4,8-bis(6-iodo-n-hexyloxy)-1,3,5,7-tetrathia-s-indacene (BHBDTI) and [NBu4](4)[SiMo12O40] in the mixed solvent CHCl2CH2Cl and CH3CN, the new radical-ion salt [C42H60Cl2O2S12](2)[SiMo12O40] was prepared. It was characterized by means of IR and ESR spectroscopy and X-ray diffraction. In the crystal structure, organic radical dications and silicomolybdate anions are alternatively arranged along the a axis to form a 1-D conducting layer. The organic layer consists of two isolated groups of BHBDTI divided by the (011) plane without short interatomic contacts. However, in each group, BHBDTI molecules associate with each other in a head to tail manner running along the [011] direction and face-to-face overlapping with a relative shift by approximately one TTF subunit along the long axis of the molecule and a slight shift along the short axis of the molecule with significantly short S ... S contacts. The room-temperature d.c. conductivity determined by the two-probe method is 10(-4) S cm(-1), suggesting that the compound is a semiconductor.

SBS as template to synthesize 3D siliceous mesostructured cellular foams

A mesostructured cellular foam (MCF) with three-dimensional (313) disordered strutlike structure is prepared by using triblock copolymer (poly(styrene-b-butadiene-b-styrene), SBS, M-W = 140K) as template under strong acid conditions. It is the first report to use triblock copolymer with both hydrophobic head and tail groups instead of hydrophilic head and hydrophobic tail copolymers to synthesize siliceous mesostructured cellular foams. The resulted materials have high pore volume (0.92 cm(3)/g) and relatively narrow pore size distributions with a large pore size of 7.9 nm, which will allow for the fixation of large active complexes, reduce diffusional restriction of reactants and enable reactions involving bulky molecules to take place, especially.

Adlayer Structures of DL-Homocysteine and L-Homocysteine Thiolactone on Au(111) Surface: an in situ STM Study

The adsorption Of DL-homocysteine (Hcy) and L-homocysteine thiolactone (HTL) on Au(1 1 1) electrode was investigated in 0.1 M HClO4 by cyclic voltammetry and in situ scanning tunneling microscopy (STM). Hcy and HTL molecules formed highly ordered adlayers on Au(1 1 1) surface. High-resolution STM images revealed the orientation and packing arrangement in the ordered adlayers. Hcy molecules formed (2root3 x 3root3)R30degrees adlayer structure and H-bonds between carboxyl groups were assumed to be responsible for the origin of tail-to-tail or head-to-head molecular arrangement, while HTL molecules formed (4 x 6) adlayer structure, and two different orientations and appearances in the ordered adlayer were found. Structural models were proposed for the two adlayers.

棘蛙族(Tribe Paini)精子形态结构及精巢年周期研究

棘蛙族(Tribe Paini)隶两栖纲(Amphibia)、无尾目(Anura)、蛙科(Ranidae)、叉舌蛙亚科(Dicroglossinae)，由棘蛙属(Paa)、倭蛙属(Nanorana) 和沙巴蛙属(Chaparana)构成（Dubois,1992）。由于特殊的形态特征和染色体核型，棘蛙族受到国内外学者的广泛重视和研究，但是到目前为止，棘蛙族的系统发育关系尚未明晰，族下属种的分类和归属问题还有待进一步研究和新的证据出现。本文通过光学显微镜、电子显微镜和石蜡切片对棘蛙族10 物种的精子和精巢进行研究，旨在了解棘蛙族精子的形态、量度、超微结构特征及不同季节精巢结构的变化规律，同时为棘蛙族的系统研究提供新的依据，也为棘蛙族濒危物种的保护和经济物种的繁殖提供基础资料。研究结果表明：棘蛙族各属物种精子的形态基本相似，精子整体呈线形，由头部、中片和尾部构成。精子头部呈长条状，顶体呈锥状，位于头部顶端并向前伸出，中片较长，尾部波动弯曲。棘蛙族各属物种精子量度差异较大，将各属物种精子头部、中片、尾部、头宽、尾宽的量度数据进行聚类分析，结果表明棘蛙族10 物种可分为三类：第一类包括棘侧蛙、合江棘蛙、小棘蛙、棘腹蛙和棘胸蛙，特点是精子较短，全长在72.6～103.35µm 之间；第二类包括倭蛙、高山倭蛙、腹斑倭蛙，特点是精子较长，全长在107.74～129.75µm 之间；第三类包括隆肛蛙和双团棘胸蛙，特点是精子最长，全长在145.89～165.84µm 之间。棘蛙族各属精子超微结构基本相似：精子头部由顶体、细胞核构成；中片由中心粒、线粒体构成；尾部由单根轴丝构成。精子顶体横切呈圆环状，细胞核电子密度高；线粒体为卵圆形，呈环状围绕轴丝排列，线粒体数目较多，约30层；尾部轴丝为典型的9＋2结构，即由2根中央微管和9对外周微管组成。不同季节的倭蛙精巢结构变化表明倭蛙精巢每年只有一个生精周期，生精周期始于7 月，繁殖季节从5 月到6 月，生精高峰期为9 月；根据倭蛙不同季节精巢结构的变化，可将生精周期分为3 个阶段：第一阶段从7 月到9 月，为精子形成期；第二阶段从10 月到翌年4 月，为精子的贮存阶段，也即倭蛙的冬眠期；第三阶段从5 月到6 月，为精子的排放阶段，即倭蛙的繁殖期。不同季节的隆肛蛙精巢结构变化表明5 月为隆肛蛙的繁殖高峰期。根据棘蛙族各属精子的形态、量度和超微结构特征，结合已有的棘蛙族形态学、生态学、染色体核型及系统学研究成果，本文认为：1．基于精子数据对棘蛙族的划分和基于形态学及分子系统学数据对棘蛙族的划分均有相同之处，精子形态结构可为棘蛙族的系统研究提供新的证据。2． 棘蛙族各属精子的形态、量度及超微结构不仅与蛙科其他属种有明显差异，而且在无尾类中也较为特殊，精子学研究结果支持将棘蛙族从蛙科中分离出来，归隶于叉舌蛙科的叉舌蛙亚科的系统学修正。3. 精子的顶体、细胞核、中片的形态结构及量度可作为蛙科的分类指标。On the base of unique morphological and kyrotype characters, Dubois(1992)recognized three genera Paa, Narnorana, Chaparana as tribe Paini, which is amember of Dicroglossinae, Ranidae. In present study, the sperm shape, size andultrastructure of 10 paini species were investigated through the light and electronmicroscope, and testis structure of N. pleskei and F. quadrana was also studied. Wesuppose this study could offer some spermatological evidence to phylogeny andreproduction study of tribe Paini. The results were as follows:The sperm shape of tribe paini is homologically similar, the spermatozoa arefiliform, composed of elongate head, long mid-piece and waved tail. The acrosome isapically associated with the nucleus and extend anteriorly.The sperm length of tribe paini differ remarkably among genera. Cluster for thelength of sperm head, mid-piece, tail, total length, head-width, tail-width of ten painifrogs indicated the 10 species could be separated into three groups: GroupⅠcontainsP. shini, P. robertingeri, P. spinosa, P. exilispinosa, P. boulengeri, the spermatozoa ischaracterized with short in total length, ranging from 72.6µm to 103.35µm; GroupⅡcontains N. pleskei, N. parkeri, N. ventripunctata, the spermatozoa ischaracterized with relatively long in total length, ranging from 107.74µm to129.75µm; Group Ⅲ contains F. quadrana and P. yunnanensis, the spermatozoa is characterized with longest in total length, ranging from 145.89µm to 165.84µm. thethree groups based on spermatological data is partially match the classification basedon morphological and molecular data.The ultrastructure of spermatozoa in tribe paini is also basic similar, includingacrosome vescile, nuleus of the head proper, centriole, mitochondriol of themid-pieces, axoneme of the tail. The acrosome vescle is circle in TEM transversesection, the density of nucleus is high; The mitochondrions is oval, surrounding theaxial filament with about 30 layers of mitochondria; The axoneme has the typical 9+2pattern of microtubules.The seasonal changes in testis of N. pleskei indicates it has only onespermatogenesis circle, which begin in July, the reproduction season is from May toJune, the spermatogenesis is active in September. On the base of seasonal changes intestis, the spermatogenesis circle can be separated into three stages: In stageⅠfromJuly to September, spermatids are formed; In stage Ⅱ from October to April next year,the spermatozoa are stored in testis,which is the hibernated period; In stage Ⅲ fromMay to June, mature spermatozoa were released from the testis, which is thereproduction season of N. pleskei. As to F. quadrana, reproduction is active in May.With the previous study of morphology, ecology, karyotypes and phylogenyresearch of tribe Paini, the spermatological data in present study suggests:1. The spermatological classification of tribe paini is partially consistant with themorphological and molecular classification respectively.2.The sperm morphology and ultrustructure of tribe paini is unique not only inthe family Ranida but also in Anura, which suggest the tribe paini is monophyletic andmight be transfered from the family Ranida to the family Dicroglossidae based onmolecular evidence.3. The acrosome, nuleus, shape, length and ultrastructure of mid-piece can beused as an alternative taxonomic character in Anura.

Cyclization in situ of isoprene polymerization catalyzed by Nd-Al bimetallic complex

Function of chloride and effect of various alkylaluminiums, C1/A1 molar ratio, solvents on cyclization in situ of isoprene polymerization catalyzed by Nd-Al bimetallic complex were studied. The structure of cyclized products was characterized by means of IR and H-1 NMR, The results indicated that in the course of isoprene polymerization with rare earth catalytic system, the function of alkylchloride introduced is terminating cis-polymerization and generating cationic species with alkyl-aluminums to initiate cyclization in situ. Soluble cyclized polyisoprene was obtained with fragments of cyclopolyisoprene.