Behaviour of Gaseous Chlorine and Alkali Metals During Biomass Thermal Utilisation

The behaviour of gaseous chlorine and alkali metals of three sorts of biomass (Danish straw, Swedish wood, and sewage sludge) in combustion or gasification is investigated by the chemical equilibrium calculating tool. The ranges of temperature, air-to-fuel ratio, and pressure are varied widely in the calculations (T=400-1800 K, gimel=0-1.8, and P=0.1-2.0 MPa). Results show that the air excess coefficient only has less significant influence on the release of gaseous chlorine and potassium or sodium during combustion. However, in biomass gasification, the influence of the air excess coefficient is very significant. Increasing air excess coefficient enhances the release of HCl(g), KOH(g), or NaOH(g) as well as it reduces the formation of KCl(g), NaCl(g), K(g), or Na(g). In biomass combustion or straw and sludge gasification, increasing pressure enhances the release of HCl(g) and reduces the amount of KCI(g), NaCl(g), KCI(g), or NaOH(g) at high temperatures. However, during wood gasification, the pressure enhances the formation of KOH(g) and KCI(g) and reduces the release of K(g) and HCl(g) at high temperatures. During wood and sewage sludge pyrolysis, nitrogen addition enhances the formation of KCN(g) and NaCN(g) and reduces the release of K(g) and Na(g). Kaolin addition in straw combustion may enhance the formation of potassium aluminosilicate in ash and significantly reduces the release of KCl(g) and KOH(g) and increases the formation of HCl(g).

Investigation of Laminar Plasma Remelting/Cladding Processing

Investigation of remelting and cladding processing with laminar plasma jets on several metals has been conducted looking for possible development of a new surface modification technique. The remelting tests illustrated that the new method could evidently improve the material microstructure and properties of cast iron. The cladding was done with Al2O3 ceramic powder on stainless steel. The energy dispersive spectra (EDS) analysis was used to determine the distribution of the major cladding element in the plasma-processed layers, for which the microstructure observations and hardness measurements were also performed.

高速流动激光器的稳定振荡条件、模式结构与输出功率的一维改进和二、三维处理

本文对高速流动激光器,将文献[1]在几何光学近似下的一维一级近似处理改进为几何光学近似所容许的最精确处理,并进行了二、三维处理,导出了二、三维情况下的稳定振荡条件、输出功率公式以及几何光学近似下的模式表示式(用增益函数表示)。按本文理论对Gerry的典型实验进行了一维和二维计算,结果均与实验吻合很好。 本文还将文献[1]对Lee的稳定振荡条件的适用范围所加的限制进行了拓广;文中还给出了光腔中模式结构的几何光学近似的适用条件,指出这一条件与自由空间中几何光学适用条件的差异。

流动激光腔中饱和增益的基本变化规律

本文给出在流动激光腔(GDL)中饱和增益系数随场分布沿流动方向变化的基本规律。联系到各振型振动能和振动温度的变化,用激活介质弛豫过程的物理机制对这些规律作了诠释,因而指出例如 Gerry 的单模输出30千瓦的器件还有相当多的可被利用的振动能。

对Rensch计算谐振腔中场分布差分法的校正

用校正的Rensch差分法计算了Gerry的GDL器件中的场分布,结果与Rensch的计算很好地相符,并已将它用于较广的耦合度范围。因而,为什么不稳定腔输出功率只有稳定腔的一半的问题能更确切地解释为所用耦合度远大于最佳值。

高速流动激光器的稳定振荡条件、模式结构与输出功率特性

本文直接由辐射场方程与边界条件导出了高速流动激光器的稳定振荡条件,指出了文献[1]所假定的稳定振荡条件仅在一定条件下近似成立,用本文得到的稳定振荡条件与文献[2]的饱和增益公式导出了GDL输出功率表达式,指出了输出功率与GDL各种参量之间的关系,用几何光学近似导出了光腔模式的解析表达式,指出了充有流动激活介质的Fabry-Perot腔的模式结构与特征.文中对Gerry的典型

气动激光器的稳定振荡条件与输出功率

本文直接由辐射场方程与边界条件导出了气动激光器的稳定振荡条件.由这一稳定振荡条件与资料的饱和增益公式导出了气动激光器的输出功率表达式,指出了在一定的近似下用迭代法可由该公式求出气动激光器的输出功率值,并导出了气动激光器的最佳耦合计算公式,指出了Rigrod公式对气动激光器的不适用性,用本文的方法对Gerry的典型实验进行了计算,计算结果与实验结果的一致证明了所提理论的可靠性.

One-dimensional improvement and two-dimensional and 3-dimensional treatments for stable oscillation condition, mode structure and power output in high-speed-flow lasers

For high-speed-flow lasers, the one-dimensional and first-order approximate treatment in[1] under approximation of geometrical optics is improved still within the scope of approx-imation of geometrical optics. The strict accurate results are obtained, and what is more,two- and three-dimensional treatments are done. Thus for two- and three-dimensional cases, thestable oscillation condition, the formulae of power output and analytical expression of modesunder approximation of geometrical optics (in terms of gain function) are derived. Accord-ing to the present theory, one-and two-dimensional calculations for the typical case of Gerry'sexperiment are presented. All the results coincide well with the experiment and are better thanthe results obtained in [1].In addition, the applicable scope of Lee's stable oscillation condition given by [1] is ex-panded; the condition for the approximation of gcometrical optics to be applied to mode con-structure in optical cavity is obtained for the first time and the difference between thiscondition and that for free space is also pointed out in the present work.

粉质粘土中的刚性桩在横向载荷作用下失稳的模型试验研究

为解释横向载荷作用下刚性桩的失稳机理,针对桩头自由的刚性桩做了一系列横向加载试验.基础土为粉质粘土,含水量介于9.85%～13.85%之间.由载荷-位移全过程曲线发现,刚性桩在横向载荷达到一定值时会失稳;由试验录像及土体剖面发现,由于土体的软化破坏,在桩后土体内会出现贯穿的局部破坏并形成一楔体,同时在土面伴随一不完全的椭圆形鼓包及一条平行于加载方向的拉伸裂缝,而在桩前土中,由于桩的挤压会形成一条侵彻沟.分析认为,对大位移刚性桩桩后土体的破坏是桩失稳的根本原因.

Improvement of sensitivity and refractive-index changes in LiNbO3 : Ce : Cu crystals with UV light

A nonvolatile recording scheme is proposed using LiNbO3:Ce:Cu crystals and modulated UV light to record gratings simultaneously in two centres and using red light to bleach the grating in the shallow centre to realize persistent photorefractive holographic storage. Compared with the normal UV-sensitized nonvolatile holographic system, the amplitude of refractive-index changes is greatly increased and the recording sensitivity is significantly enhanced by recording with UV light in the LiNbO3:Ce:Cu crystals. Based on jointly solving the two-centre material equations and the coupled-wave equations, temporal evolutions of the photorefractive grating and the diffraction effciency are effectively described and numerically analysed. Roles of doping levels and recording-beam intensity are discussed in detail. Theoretical results confirm and predict experimental results.

偏振模色散和时延抖动对啁啾光纤光栅色散补偿特性的影响

对存在偏振模色散(PMD)和群时延(GD)抖动的非理想线性啁啾光纤光栅的色散补偿特性进行了研究。实验测量了啁啾光纤光栅的群时延谱和偏振模色散光谱，理论分析和实验测量表明，啁啾光纤光栅差分群时延(DGD)抖动与其时延抖动密切相关。通过数值模拟方法，计算了线性啁啾光纤光栅偏振模色散眼图代价与入射到啁啾光纤光栅色散补偿器的光信号的偏振方向的关系，计算结果表明在使用啁啾光纤光栅色散补偿器时应对光信号的偏振方向进行调整，以获得最佳补偿效果。另外结合实验数据，模拟计算并讨论了非理想线性啁啾光纤光栅群时延抖动和偏振模色

无指盘臭蛙臭蛙肽及其基因和在制药中的应用

本发明涉及一种无指盘臭蛙臭蛙肽及其基因和在制药中的应用，属于生物医学领域。无指盘臭蛙臭蛙肽是无指盘臭蛙臭蛙肽基因编码的一种单链多肽，分子量1814.11道尔顿，等电点8.08，多肽全序列一级结构为： Gly Cys Ser Arg Trp Ile Ile Gly Ile His Gly Gln Ile Cys Arg Asp。(GCSRWIIGIHGQICRD)。编码无指盘臭蛙臭蛙肽的基因由312个核苷酸组成，其中编码成熟无指盘臭蛙臭蛙肽为第141-189位核苷酸。人工合成的无指盘臭蛙臭蛙肽具有很强的抑制细菌和真菌生长的作用，可以作为制备病原微生物感染疾病的治疗药物被应用。本发明的无指盘臭蛙臭蛙肽具有结构简单、人工合成方便、抗菌谱系广、抗菌活性强的特点。