Influence of two different representations of the G-matrix to the in-medium nucleon-nucleon cross sections

We calculate the in-medium nucleon-nucleon scattering cross sections from the G-matrix using the Dirac-Brueckner-Hartree-Fock (DBHF) approach. And we investigate the influence of the different representations of the G-matrix to the cross sections, the difference of which is mainly from the different effective masses.

Medium-spin states in Ge-70 and the role of the g(9/2) orbital

Medium-spin states of Ge-70 have been studied via the Ni-60(C-12,2p gamma)Ge-70 reaction at 45 MeV. The ground-state band and the second 0(+) band have been extended to the 12(+) and 8(+) states, respectively. Two negative-parity bands, one of which has a coupled structure and the other has a decoupled structure, have been observed additionally. Although the latter decoupled structure was known up to the (21(-)) state from a previous experiment, the part of the level scheme up to the 15(-) state has been largely modified by the present experiment. Backbendings observed in the positive- and negative-parity yrast bands have been compared with those of the neighboring even Ge isotopes. The experimental level structure has been compared with the shell-model calculations in the model space (2p(3/2), 1f(5/2), 2(p1/2), 1g(9/2)) employing two kinds of effective interactions, one of which is an extended P + QQ interaction with monopole interactions and the other is developed from a renormalized G matrix. Microscopic structures of the observed bands have been discussed with the help of the shell-model calculations.

两个冠醚分子在简正坐标分析及NRCC程序在微机上的移植

本文用加拿大国立研究院(National Research Council of Canada) Fuhrer等人编制的FORTRAN语言程序（以下简称NRCC程序），对两个冠醚类化合物进行了简正坐标分析，这两个化合物分子是二氧六环(C_4H_8O_2)和12－冠－4(C_8H_(16)O_4)。作者用Synder和Zerbi提出的一般价力场，计算了二氧六环的36个简正振动频率，精化四次后的结果误差为14.04 cm~(-1)，得到了二氧六环的精化力场和势能分析矩阵；做了12－冠－4－的中红外光谱(3200-5000cm~(-1))。远红外光谱(500-70cm~(-1))和拉曼光谱(3200-50 cm~(-1)，从而归属出12－冠－4的78个简正振动频率实验值；利用二氧六环的精化力场作为初始力场，计算了12－冠－4的简正振动频率，对78个简正振动频率进行了精化计算，精化三次后的结果误差为13.99 cm~(-1)，精化后得到12－冠－4的精化力场和势能分布矩阵；将NRCC程序以BASIC语言移至TRS-80微型机上，对二氧六环进行了计算，结果良好，首次给出二氧六环一般价力场的势能分布。一、对二氧六环的处理 二氧六环分子式C_4H_8O_2，合14个原子，有3N－6＝36个简正振动频率。分子结构系由二个乙氧基(-CH_2-CH_2-O-)单元组成的含有四个碳，两个氧的六元环，平衡态分子为椅式构象，属于C_(2h)点群，36个简正振动频率分为四个对称类Ag、Au、Bg和Bu，分布是：Ag 10个，Bg 8个，Au 9个，Bu9个。二氧六环的分子结构及坐标示意图见28而图5，定义了14个伸缩内坐标，26个弯曲内坐标，6个扭曲内坐标，共46个，C－C键长1.54A，C-O键长1.41 A，C－H键长1.096A，键角都用109°28'。用CART程序（NRCC程序之一）计算二氧六环14个原子的笛卡尔坐标，用GMAT程序（NRCC程序之二）计算其B矩阵和G矩阵，用FPERT程序（NRCC程序之三）计算其简正振动频率、精化力场，计算用一般价力场，引入V矩阵对称化，将46个坐标化为46个（内）对称坐标，10个多余坐标在FPERT程序计算中除去。二、对12－冠－4的处理 12－冠－4分子式C_8H_(16)O_4，含28个原子，共3N－6＝78个简正振动频率，分子结构为四个乙氧基(-CH_2-CH_2-O-)单元组成的含八个碳、四个氧的12元环，自由分子的12－冠－4属于C点群。结构数据引自Groth的X光衍射分数和坐标，自己编制了BASIC语言程度将分数坐标化为笛卡尔坐标，用GMAT程序计算B矩阵和G矩阵，FPERT程序计算78个简正振动频率、精化力场、计算势能分布矩阵，引入U矩阵将92个内坐标化为92个对称坐标，14个多余坐标在FPERT程序中自动除去。三、结果 势能分布矩阵给出分子的振动归属，对这两个冠醚类分子的3N－6个简正振动频率，可以划分为五个振动区域。1．C－H伸缩振动区（3000－2800 cm~(-1)） 在该区中，二氧六环有八个值：2974、2966、2854和2867 cm~(-1)各两个，12－冠－4有16个值：2935、2923、2915和2907 cm~(-1)各两个，2860 cm~(-1)8个，高于2900 cm~(-1)者为反对称伸缩振动，低于2900 cm~(-1)者为对称伸缩振动。2．亚甲基弯曲振动之一(1500-1400 cm~(-1)) 该区的主要振动是亚甲基剪式振动(Scissor)，其它振动小于10％二氧六环在该区有四个频率：1443、1461、1451和1457 cm~(-1)，12－冠－4有八个频率：1466、1450、1450和1405 cm~(-1)各两个。3．亚甲基弯曲振动区二(1400-1200 cm~(-1))该区的主要振动模式为亚甲基的颤动(wag)、卷曲(twist)和摆动(rock)振动，其它振动小于13％。二氧六环在该区有八个频率：1334、1303、1396、1216、1367、1264、1377和1296 cm~(-1)，12－冠－4有十六个频率：1388、1363、……1229 cm~(-1)（其中1288、1307cm~(-1)非简并，其余皆两重简并）。4．环的骨架伸缩振动区(1200-600 cm~(-1))该区振动模式复杂，除环的骨架伸缩振动外，还有亚甲基的wag、twist、rock以及环的骨架弯曲振动，而且这些振动的势能分布值都不小。二氧六环在该区有十一个频率，从1127至610 cm~(-1)，12－冠－4有二十个频率，从1135至184 cm~(-1)且大都是二重简并的。5．低频区(600-50cm~(-1))这两个分子在低频区的势能分布略有差别。二氧六环在该区有五个频率：503、486、427、276和224 cm~(-1)，主要振动模式为骨架弯曲振动和扭曲振动，C－O、C－C的扭曲振动在三个最低频率中分布占10－30％。12－冠－4在该区有18个频率，除570和547cm~(-1)处，都是二重简并的，六个最低频率的振动模式完全属于C－O、C－C键的扭曲振动，其它振动小于10％，所以200 cm~(-1)以下可称为12－冠－4的扭曲振动区，在600－200cm~(-1)之间的12个频率主要是骨架的弯曲振动，也有一定量的亚甲基wag、twist、rock振动。12－冠－4的简正坐标分析尚未有人做过。二氧六环的计算结果与Snyder和Zerbi的分析相吻合，12－冠－4和二氧六环两分子势能分布的相对一致性证明了对12－冠－4的简正坐标分析基本是正确的。本文比较了二分子的力常数和振动频率，探讨了环的大小对振动光谱的影响。四、NRCC程序简介 NRCC程序由CART、GMAT和FPERT三个程序组成，即可联一起运用，亦可分开独立进行运算。该程序功能强，所占内存大，适于大、中型计算机使用。CART程序之名字取自Cartisian Co-or-dinates的前四个字母，功能系由分子结构参数（键长、键角）计算分子内各原子的笛卡尔坐标。GMAT程序之名字取自G matrix的前四个字母，功能系由分子内各原子的笛卡尔坐标，原子质量和内坐标定义计算分子内各原子的坐标交换矩阵B和Wilson振动动能矩阵G。FPERT程序之名字取自F Perturbation的前五个字母，功能系由分子振动功能矩阵G、势能常数即力常数矩阵F计算分子的简正振动频率和势能分布矩阵，再通过实验频率精化势能矩阵F。NRCC程序可对含30个原子、60个内坐标的分子进行简正坐标分析，扩充后容量增大一倍。该程序可选用一般价力场(General Valence Force Field, 简称GVFF)和UBS力场(Urey-Bradley-Shimanouchi Force Field)，简称UBSFF或UBFF)。可选用对称化U矩阵，可自行决定力场精化次数和阻尼常数以限制精化结果的收敛性。五、NRCC程序在TRS－80微型机上移植试尝（该部分曾在第三届长春夏季化学讨论会上宣读）针对NRCC程序占内存空间大、难以在微型机上实现的情况，作者将NRCC程序改编为BASIC语言，改变程序的原来结构，形成一组BASIC语言程序：CART／BAS、GMAT／BAS和VIFR／BAS，改编后的BASIC程序在TRS－80微型机调试通过，TRS－80机字长8位，New Dos系统内存32K。改写后的程序只保持了原程序的基本原理，在内存，语句上改动很大，以适于微型机使用。数据在程序中直接嵌入，利于修改替换，且BASIC语言简单易学，便于操作。CART／BAS程序可计算含30个原子以内的分子的笛卡尔坐标，GMAT／BAS程序可计算含20个原子、45个内坐标的分子的G矩阵，VIFR／BAS程序可计算含15个原子的分子的简正振动频率。利用这组程序，作者以二氧六环分子为例做了一些试尝运算，误差14.4 cm~(-1)，相对误差1.8%，结果较理想。

A micromechanical model of influence of particle fracture and particle cluster on mechanical properties of metal matrix composites

A general analytical model for a composite with an isotropic matrix and two populations of spherical inclusions is proposed. The method is based on the second order moment of stress for evaluating the homogenised effective stress in the matrix and on the secant moduli concept for the plastic deformation. With Webull's statistical law for the strength of SiCp particles, the model can quantitatively predict the influence of particle fracture on the mechanical properties of PMMCs. Application of the proposed model to the particle cluster shows that the particle cluster has neglected influence on the strain and stress curves of the composite. (C) 1998 Elsevier Science B.V.

High-Strength Composite Fibers: Realizing True Potential of Carbon Nanotubes in Polymer Matrix through Continuous Reticulate Architecture and Molecular Level Couplings

Carbon nanotubes have unprecedented mechanical properties as defect-free nanoscale building blocks, but their potential has not been fully realized in composite materials due to weakness at the interfaces. Here we demonstrate that through load-transfer-favored three-dimensional architecture and molecular level couplings with polymer chains, true potential of CNTs can be realized in composites as Initially envisioned. Composite fibers with reticulate nanotube architectures show order of magnitude improvement in strength compared to randomly dispersed short CNT reinforced composites reported before. The molecular level couplings between nanotubes and polymer chains results in drastic differences in the properties of thermoset and thermoplastic composite fibers, which indicate that conventional macroscopic composite theory falls to explain the overall hybrid behavior at nanoscale.

Determination of 266 pesticide residues in apple juice by matrix solid-phase dispersion and gas chromatography-mass selective detection

A macro matrix solid-phase dispersion (MSPD) method was developed to extract 266 pesticides from apple juice samples prior to gas chromatography-mass selective detection (GC-MSD) determination. A 10 g samples was mixed with 20 g diatomaceous earth. The mixture was transferred into a glass column. Pesticide residues were leached with a 160 mL hexane-dichloromethane (1:1) at 5 mL/min. Two hundred and sixty-six pesticides were divided into three groups and detected by GC-MSD under selective ion monitoring. The proposed method takes advantage of both liquid-liquid extraction and conventional MSPD methods. Application was illustrated by the analysis of 236 apple juice samples produced in Shaanxi province China mainland this year. (C) 2004 Elsevier B.V. All rights reserved.

Spin relaxation in submonolayer and monolayer InAs structures grown in a GaAs matrix

Electron-spin dynamics in InAs/GaAs heterostructures consisting of a single layer of InAs (1/3-1 monolayer) embedded in (001) and (311)A GaAs matrix was studied by means of time-resolved Kerr rotation spectroscopy. The spin-relaxation time of the submonolayer InAs samples is significantly enhanced, compared with that of the monolayer InAs sample. The electron-spin-relaxation time and the effective g factor in submonolayer samples were found to be strongly dependent on the photogenerated carrier density. The contribution from both the D'yakonov-Perel' mechanism and Bir-Aronov-Pikus mechanism are discussed to interpret the temperature dependence of spin decoherence at various carrier densities.

Formation of ferromagnetic clusters in GaAs matrix and GaAs/AlGaAs superlattice through Mn ion implantation at two different temperatures

Different submicron ferromagnets are fabricated into GaAs and GaAs/AlGaAs superlattice through ion implantation at two different temperatures followed by thermal annealing. The structural and magnetic properties of the granular film are studied by an atomic force microscope, X-ray diffraction and alternating gradient magnetometer. By analyzing the saturation magnetization M-s, remanence M-r, coercivity H-c and remanence ratio S-q, it is confirmed that both MnGa and MnAs clusters are formed in the 350degreesC-implanted samples whereas only MnAs clusters are formed in the room-temperature implanted samples. (C) 2004 Elsevier B.V. All rights reserved.

Effect of substrate misorientation on the InAs/InAlAs/InP nanostructure morphology and lateral composition modulation in the InAlAs matrix

The authors report the self-organized growth of InAs/InAlAs quantum wires on nominal (001) InP substrate and (001) InP substrates misoriented by 2 degrees, 4 degrees, and 8 degrees towards both [-110] and [110]. The influence of substrate misorientation on the structural and optical properties of these InAs/InAlAs quantum wires is studied by transmission electron microscopy and photoluminescence measurements. Compared with that grown on nominal (001) InP substrate, the density of InAs/InAlAs quantum wires grown on misoriented InP(001) substrates is enhanced. A strong lateral composition modulation effect take place in the InAlAs buffer layers grown on misoriented InP substrates with large off-cut angles (4 degrees and 8 degrees), which induces a nucleation template for the first-period InAs quantum wires and greatly improve the size distribution of InAs quantum wires. InAs/InAlAs quantum wires grown on InP (001) substrate 8 degrees off cut towards [-110] show the best size homogeneity and photoluminescence intensity. (c) 2007 American Institute of Physics.

Absorption spectra of nanocrystalline silicon embedded in SiO2 matrix

Nanocrystalline silicon (nc-Si) embedded SiO2 matrix has been formed by annealing the SiOx films fabricated by plasma-enhanced chemical vapor deposition (PECVD) technique. Absorption coefficient and photoluminescence of the films have been measured at room temperature. The experimental results show that there is an "aUrbach-like" b exponential absorption in the spectral range of 2.0-3.0 eV. The relationship of (alpha hv)(1/2) proportional to(hv - E-g) demonstrates that the luminescent nc-Si have an indirect band structure. The existence of Stokes shift between photoluminescence and absorption edge indicates that radiative combination can take place not only between electron states and hole states but also between shallow trap states of electrons and holes. (C) 2000 Elsevier Science B.V. All rights reserved.

Zinc phthalocyanine (ZnPc) incorporated into silicon matrix grown by plasma enhanced chemical vapor deposition (PECVD)

Hybrid composites composed of zinc phthalocyanine embedded in silicon matrixes have attracted attention because of the potential for solar energy conversion. We produce hybrid composites by thermal evaporation for the plithalocyanine and PECVD (Plasma Enhanced Chemical Vapor Deposition) for the silicon matrix. Deposition of ZnPc/a-Si(amorphous silicon) composites was achieved in a sequential manner. The compound films were characterized by optical transmittance spectra and photoconductivity measurement. The optical transmittance measurements were carried out in the visible region (500 - 800 nm). Compared to pure silicon film, the photosensitivity of compound functional films was enhanced by one order of magnitude. This demonstrates the Si sensitized by adding ZnPc.

Performance of an embedded optical vector matrix multiplication processor architecture

An embedded architecture of optical vector matrix multiplier (OVMM) is presented. The embedded architecture is aimed at optimising the data flow of vector matrix multiplier (VMM) to promote its performance. Data dependence is discussed when the OVMM is connected to a cluster system. A simulator is built to analyse the performance according to the architecture. According to the simulation, Amdahl's law is used to analyse the hybrid opto-electronic system. It is found that the electronic part and its interaction with optical part form the bottleneck of system.

Fast calculation technique for scattering in T-matrix method

In scattering calculations using the T-matrix method, the calculation of the T-matrix involves multiplication and inversion of matrices. These two types of matrix operations are time-consuming, especially for the matrices with large size. Petrov et al. [D. Petrov, Y. Shkuratov, G. Videen, Opt. Lett. 32 (2007) 1168] proposed an optimized matrix inversion technique, which suggests the inversion of two matrices, each of which contains half the number of rows. This technique reduces time-consumption significantly. On the basis of this approach, we propose another fast calculation technique for scattering in the T-matrix method, which obtains the scattered fields through carrying out only the operations between matrices and the incident field coefficient. Numerical results show that this technique can decrease time-consumption by more than half that of the optimized matrix inversion technique by Petrov et al. (c) 2008 Elsevier B.V. All rights reserved.

Controlled release of urea encapsulated by starch-g-poly(L-lactide)

This paper presented a new approach for preparing a new type of slow-release membrane-encapsulated urea fertilizer with starch-g-PLLA as biodegradable carrier materials. By solution-casting and washing rapidly with water the urea was individually encapsulated within the starch matrix modified by L-lactide through in situ graft-copolymerization.

Computer simulation of the damage evolution of fiber-reinforced polypropylene-matrix composites with matrix defects

The damage evolution of fiber-reinforced polypropylene-matrix composites with matrix defects was studied via a Monte Carlo technique combined with a finite element method. A finite element model was constructed to predict the effects of various matrix defect shapes on the stress distributions. The results indicated that a small matrix defect had almost no effect on fiber stress distributions other than interfacial shear stress distributions. Then, a finite element model with a statistical distribution of the fiber strength was constructed to investigate the influences of the spatial distribution and the volume fraction of matrix defects on composite failure. The results showed that it was accurate to use the shear-lag models and Green's function methods to predict the tensile strength of composites even though the axial stresses in the matrix were neglected.