PATTERNS OF SPATIAL-DISPERSION, LOCOMOTION AND FORAGING BEHAVIOR IN 3 GROUPS OF THE YUNNAN SNUB-NOSED LANGUR (RHINOPITHECUS-BIETI)

Aspects of the behaviour of three groups of Yunnan snub-nosed langurs, Rhinopithecus bieti, were observed over the course of three field seasons from 1986 to 1988. The major findings of the study were: (1) The habitats of R. bieti were mainly at heights of 3,600-4,150 m above sea level. (2) Groups were very large, with group sizes ranging from more than 100 to 269 individuals. (3) Spatial dispersion densities ranged from about 27 to 106 m2/individual during sleeping and resting, to feeding dispersions as large as 5,000-15,000 m2. (4) The locomotor repertoire of R. bieti consisted largely of walking, jumping and climbing. On very rare occasions, semibrachiation was observed, but true brachiation was never observed. The locomotor repertoires of juveniles were more diverse than those of subadults or adults. (5) Communication consisted mainly of eye-to-eye contact accompanied by murmurs; while loud calls were heard only rarely. (6) Groups moved between sleeping and feeding sites in single file. It is concluded that R. bieti is a mainly terrestrial species.

根茎克隆植物羊草分株种群对去叶干扰的生长对策

克隆植物具有多种不同于非克隆植物的生长和繁殖策略。本研究首先综述了这些生长与繁殖策略之中，与我们的实验研究相关的尤其是对于去叶干扰适应策略的四个方面，包括克隆整合、克隆分株大小与密度之权衡( tradeoff)过程、碳水化合物贮备与利用、营养繁殖和芽种群(bud population)调节等。预测克隆植物选择什么样的对策以及某种对策发生作用的条件及程度如何，对克隆植物生态学研究者来说，将是富有挑战意味的课题。 羊草(Leymus chinensis (Trin,) Tzvel.)是禾本科的一种多年生根茎型克隆植物，常常处于由放牧或刈割造成的去叶干扰( defoliation)的胁迫下。在我们的第一个实验（2002年）中，考察了去叶干扰和根茎切割( rhizome severing)是否影响根茎本身和分株地上部分的生长、以及营养繁殖芽的数量特征。同时我们检验如下的假设：直接受到去叶干扰的分株除了会受益于可能的补偿作用之外，还会受益于克隆整合作用，即与之保持根茎联系的未受去叶处理的分株将转移碳水化合物或养分给受去叶干扰的分株，使之得以尽快恢复光合组织。实验结果显示：单次去叶干扰影响根茎生长和芽的产生，而对地上部分的生长影响甚微。只有重度去叶干扰才显著影响营养繁殖芽的产生，而轻度去叶干扰作用不明显。所以，当去叶强度不大时，补偿作用机制将弥补植物由于去叶干扰而受到的损失。我们的实验并未检测到克隆整合的发生，可能的原因是本实验持续的时间不足够长或者是由于根茎中的碳水化合物贮备在去叶干扰发生后发挥了作用，缓解了去叶干扰对羊草分株生长及芽生产的所造成的冲击。 在第二个实验（200 3年）中，为了考查相继数次的去叶干扰是否能够启动羊草分株间的克隆整合，以及启动克隆整合所需达到的去叶干扰的频次，我们将实验样方设计为两部分：核心区( Core section)和外围区(Periphery section)。不同频次的去叶处理（0去叶，作为对照; 1次去叶;3次去叶;5次去叶）仅施加于实验样方的核心区。结果表明，经历3次和5次去叶处理的样方外围区的生物量及水溶性碳水化合物( wsc)含量均明显少于经历1次去叶处理及0去叶处理的样方外围区，这意味着克隆整合在3次去叶和5次去叶两种处理中发生了，而在其它两种处理中没有发生。此外，分株的大小一数目之权衡可能在基株(genet)水平上发生，因此，一个克隆植物基株，当部分分株受到去叶干扰后，将增加其分株数目，但优先增加未受到去叶干扰部分的分株数目。我们将羊草的这种行为视为克隆基株试图逃避干扰的“逃逸行为”( escaping behavior)。 同时在实验中，我们监测了实验样方核心区分株的wsc浓度，目的是查明羊草枝条与根茎中wsc浓度随时间的变化格局及其对去叶干扰的响应，意在发现羊草枝条地上、地下部分和根茎中wsc浓度的时间变化之间的联系。在生长旺季，对照处理（即O去叶处理）的wsc浓度显著降低，这是由于植物在此时期的高生长速率和高呼吸速率所致;相比之下，其它经历去叶干扰的三个处理中羊草wsc浓度降低不如对照处理那么明显和迅速，甚至在高频次去叶处理中还有所上升，其原因大概是由于去叶而使叶面积减小，引起枝条的总呼吸下降所致。羊草枝条中最终的wsc浓度没有受到单次去叶处理的显著影响，却很可观地受到相继数次去叶干扰（3次和5次去叶处理）的影响。去叶干扰可能加速了碳水化合物在气温降低时自地上向地下的转移。枝条的地下部分wsc浓度比地上部分更稳定。在地上部分受到去叶干扰后，根茎中的wsc必然向上输出到地上枝条，而强烈的生长会消耗wsc，但可能的克隆整合（通常在相对频繁的去叶干扰条件下发生）将在一定程度上缓解这种wsc消耗。 在此实验中，我们还监测了羊草平均每分株所拥有的芽的数目，包括每分株分蘖节芽（tiller bud）数目和根茎芽(thizomatous bud)数目。从平均每分株芽数目的时间动态来看，各种去叶处理之间的差异程度不大，这主要是羊草在受到去叶干扰后补偿作用的贡献。与对照处理相比，受不同频次去叶干扰的三个处理的根茎芽具有相对于分蘖节的更强的增长优势。去叶干扰对根茎芽生长的促进作用大于对分蘖节芽的促进作用。我们认为这种反应是羊草克隆基株的一种逃避干扰的适应性努力，可视为一种“逃逸行为”，也可看作克隆植物觅养行为(foraging behavior)的一种特殊形式。芽的增长在中等频度的去叶干扰条件下最强，似乎同样符合中度干扰理论。有趣的是，特定频度的去叶干扰可能会造成芽种群中两大类型芽之间比例（根茎芽／分蘖节芽）的振荡现象（Oscillation）。 最后展望了对于羊草今后应继续开展的工作主要集中在两大方面：一是有性繁殖与无性繁殖之间在不同生境或不同干扰条件下的权衡关系;二是处于不同斑块对比度( patch contrast)的生境中的羊草克隆分株之问的生理整合，及其强度与斑块对比度的定量关系。

捕食风险与动物行为及其决策的关系

The research progress of the effect of predation risk on animals’behavior and their decision was introduced in the paper. In recent decade , a lots of researches dealt with effects of predation on prey foraging behavior (including when to feed , where to feed , what to eat , how to consume) , habitat selection and defensive behavior in the various types of ecological systems. The results showed that animals had the ability to assess and control their risk of being pred in ecological time and they could incorporate this information with their making of decision during the lifetime. Some researches suggested that the decision reflected apparent trade-offs between the risk of predation and the benefits to be gained from enaging in a given activity. It was stressed that predation risk was an important and necessary trade-off factor for animals’decision making. In addition , the effect of indirect predation at community level was one of the forces of shaping community structure and become an important way for studing mechanism of community organization. At the population level , it also may be significant advers effecting on population distribution , density and reproduction.

A Review of Studies on the Mechanical Behavior of Microcellular Plastics

对微孔泡沫塑料力学行为的研究文献进行了综述,简单介绍了微孔泡沫塑料的制备和表征方法,重点介绍了微孔泡沫塑料力学性能的研究工作,其中也包括作者近期在该领域的一些工作。这些工作主要讨论了微孔泡沫塑料的压缩、拉伸、冲击、疲劳和黏弹性效应。最后：给出了对该领域工作的一些讨论和展望。

Size-dependent inelastic behavior of particle-reinforced metal-matrix composites

The strengthening behavior of particle-reinforced metal-matrix composites (MMCp) is primarily attributed to the dislocation strengthening effect and the load-transfer effect. To account for these two effects in a unified way, a new hybrid approach is developed in this paper by incorporating the geometrically necessary dislocation strengthening effect into the incremental micromechanical scheme. By making use of this hybrid approach, the particle-size-dependent inelastic deformation behavior of MMCp is given. Some comparisons with the available experimental results demonstrate that the present approach is satisfactory.

Effects of Microstructural Heterogeneity on the Spallation Behavior of Materials

It is of utmost importance to understand the spallation behaviour of heterogeneous materials. In this paper, a driven nonlinear threshold model with stress fluctuation is presented to study the effects of microstructural heterogeneity on continuum damage evolution. The spallation behavior of heterogeneity material is analyzed with this model. The heterogeniety of mesoscopic units is characterized in terms of Weibull modulus m of strength distibution and stress fluctuation parameter k. At high stress, the maximum damage increases with m; while at low stress, the maximum damage decreases. In addition, for low stress, severe stress fluctuation causes higher damage; while for high stress, causes lower damage.

Indentation Creep Behavior in Ce-Based Bulk Metallic Glasses at Room Temperature

The room temperature creep behaviors of Ce-based bulk metallic glasses were examined by the use of nanoindentation. The creep rate and creep rate sensitivity of Ce-based BMGs were derived from indentation creep curves. The low creep rate sensitivity of Ce-based BMGs indicates that the room temperature creep is dominated by localized shear flow. The experimental creep curves can be described by a generalized Kelvin model. Furthermore, the creep retardation spectrum is calculated for the Ce-based metallic glasses. The results showed that creep retardation spectrum consists of two relatively separated peaks with the well defined characteristic relaxation times.

Dynamic behavior of a cylindrical crack in a functionally graded interlayer under torsional loading

In this paper the problem of a cylindrical crack located in a functionally graded material (FGM) interlayer between two coaxial elastic dissimilar homogeneous cylinders and subjected to a torsional impact loading is considered. The shear modulus and the mass density of the FGM interlayer are assumed to vary continuously between those of the two coaxial cylinders. This mixed boundary value problem is first reduced to a singular integral equation with a Cauchy type kernel in the Laplace domain by applying Laplace and Fourier integral transforms. The singular integral equation is then solved numerically and the dynamic stress intensity factor (DSIF) is also obtained by a numerical Laplace inversion technique. The DSIF is found to rise rapidly to a peak and then reduce and tend to the static value almost without oscillation. The influences of the crack location, the FGM interlayer thickness and the relative magnitudes of the adjoining material properties are examined. It is found among others that, by increasing the FGM gradient, the DSIF can be greatly reduced.

Formation, Thermal Stability and Deformation Behavior of Graphite-Flakes Reinforced Cu-based Bulk Metallic Glass Matrix Composites

Graphite-flake reinforced Cu47Ti34Zr11 Ni-8 bulk metallic glass matrix composite was fabricated by water-cooled copper mould cast. Most of the graphite flakes still keep unreacted and distribute uniformly in the amorphous matrix except that some reactive wetting occurs by the formation of TiC particles around the flakes. It reveals that the presence of graphite flakes does not affect the onset of the glass transition temperature, crystallization reaction and liquidus of the metallic glass. The resulting material shows obvious serrated flow and higher fracture strength under room temperature compressive load, comparing with the monolithic bulk metallic glass (BMG). Three types of interaction between the shear bands and graphite flakes, namely, shear band termination, shear bands branching and new shear bands formation near the graphite flakes can be observed by quasi-static uniaxial compression test and bonded interface technique through Vickers indentation.

3D Anisotropic Elastoplastic-Damage Model and its Application in Simulating the Behavior of Rock Materials

A 3D anisotropic elastoplastic-damage model was presented based on continuum damage mechanics theory. In this model, the tensor decomposition technique is employed. Combined with the plastic yield rule and damage evolution, the stress tensor in incremental format is obtained. The derivate eigenmodes in the proposed model are assumed to be related with the uniaxial behavior of the rock material. Each eigenmode has a corresponding damage variable due to the fact that damage is a function of the magnitude of the eigenstrain. Within an eigenmodes, different damage evolution can be used for tensile and compressive loadings. This model was also developed into finite element code in explicit format, and the code was integrated into the well-known computational environment ABAQUS using the ABAQUS/Explicit Solver. Numerical simulation of an uniaxial compressive test for a rock sample is used to examine the performance of the proposed model, and the progressive failure process of the rock sample is unveiled.

Strain Gradient Effects on Deformation Strengthening Behavior of Particle Reinforced Metal Matrix Composites

Dislocation models with considering the mismatch of elastic modulus between matrix and reinforcing particles are used to determine the effective strain gradient \ita for particle reinforced metal matrix composites (MMCp) in the present research. Based on Taylor relation and the kinetics of dislocation multiplication, glide and annihilation, a strain gradient dependent constitutive equation is developed. By using this strain gradient-dependent constitutive equation, size-dependent deformation strengthening behavior is characterized. The results demonstrate that the smaller the particle size, the more excellent in the reinforcing effect. Some comparisons with the available experimental results demonstrate that the present approach is satisfactory.

PMMA with Long-Persistent Phosphors and Its Behavior of Luminescence

A new kind of rare earth material with high efficient long-persistent phosphors, such as SrAl2O4: Eu, Dy, has been developed in recent years. The PMMA with long-persistent phosphors is typical one of applications for the phosphors. In this work, we try to probe into the affection of the manufacture process on the PMMA with long-persistent phosphors, to analyze its performance, and its luminescence behavior, especially to study the self-excitation of the PMMA with long-persistent phosphors.

Plastic constitutive behavior of short-fiber/particle reinforced composites

A cylindrical cell model based on continuum theory for plastic constitutive behavior of short-fiber/particle reinforced composites is proposed. The composite is idealized as uniformly distributed periodic arrays of aligned cells, and each cell consists of a cylindrical inclusion surrounded by a plastically deforming matrix. In the analysis, the non-uniform deformation field of the cell is decomposed into the sum of the first order approximate field and the trial additional deformation field. The precise deformation field are determined based on the minimum strain energy principle. Systematic calculation results are presented for the influence of reinforcement volume fraction and shape on the overall mechanical behavior of the composites. The results are in good agreement with the existing finite element analyses and the experimental results. This paper attempts to stimulate the work to get the analytical constitutive relation of short-fiber/particle reinforced composites.

Strain Rate-Dependent Compressive Deformation Behavior of Nd-Based Bulk Metallic Glass

Compressive deformation behavior of the Nd60Fe20Co10Al10 bulk metallic glass was characterized over a wide strain rate range (6.0 x 10(-4) to 1.0x10(3) s(-1)) at room temperature. Fracture stress was found to increase and fracture strain decrease with increasing applied strain rate. Serrated flow and a large number of shear bands were observed at the quasi-static strain rate (6.0 x 10(-4)s(-1)). The results suggest that the appearance of a large number of shear bands is probably associated with flow serration observed during compression; and both shear banding and flow serration are a strain accommodation and stress relaxation process. At dynamic strain rates (1.0 x 10(3) s(-1)), the rate of shear band nucleation is not sufficient to accommodate the applied strain rate and thus causes an early fracture of the test sample. The fracture behavior of the Nd60Fe20Co10Al10 bulk metallic glass is sensitive to strain rate.