Size Effects in Micro-bending Deformation of MEMS Devices Based on the Discrete Dislocation Theory

In the present research, the discrete dislocation theory is used to analyze the size effect phenomena for the MEMS devices undergoing micro-bending load. A consistent result with the experimental one in literature is obtained. In order to check the effectiveness to use the discrete dislocation theory in predicting the size effect, both the basic version theory and the updated one are adopted simultaneously. The normalized stress-strain relations of the material are obtained for different plate thickness or for different obstacle density. The prediction results are compared with experimental results.

Upwind compact method and direct numerical-simulation of driven flow in a square cavity

A high-order accurate finite-difference scheme, the upwind compact method, is proposed. The 2-D unsteady incompressible Navier-Stokes equations are solved in primitive variables. The nonlinear convection terms in the governing equations are approximated by using upwind biased compact difference, and other spatial derivative terms are discretized by using the fourth-order compact difference. The upwind compact method is used to solve the driven flow in a square cavity. Solutions are obtained for Reynolds numbers as high as 10000. When Re less than or equal to 5000, the results agree well with those in literature. When Re = 7500 and Re = 10000, there is no convergence to a steady laminar solution, and the flow becomes unsteady and periodic.

THE ORIGIN AND GENETIC DIFFERENTIATION OF NATIVE BREEDS OF PIGS IN SOUTHWEST CHINA - AN APPROACH FROM MITOCHONDRIAL-DNA POLYMORPHISM

Mitochondrial DNA (mtDNA) of six breeds of native domestic pigs from Yunnan province, southwest China, and two wild boars obtained from Sichuan, China, and Vietnam was analyzed using 20 restriction endonucleases that recognize six nucleotides. Restriction maps were made by double-digestion methods and polymorphic sites were located on the map. According to their mtDNA restriction types, all the breeds were classified into six groups. Genetic distances among groups were calculated to define their phylogenetic relationships. The relationship between the Sichuan wild boar and domestic pigs is close, while the Vietnamese wild boar is relatively far from them, so the domestic pigs in southwest China are likely to have originated from a wild pig which distributed in west China. We compare our results with previous reports in literature and discuss the relationship among Chinese pigs, Japanese pigs, and European pigs. The mtDNA cleavage pattern of the Mingguang pig digested by EcoRV was identical to that of Duroc; mutations at the EcoRI site, detected in the mtDNA of two Dahe pigs, are the same as in the Vietnamese wild boar, suggesting that mutational hot spots exist in the mtDNA of pigs.

Assessment of Microscale Test Methods of Peeling and Splitting along Surface of Thin-Film/Substrates

Peel test methods are assessed through being applied to a peeling analysis of the ductile film/ceramic substrate system. Through computing the fracture work of the system using the either beam bend model (BB model) or the general plane analysis model (GPA model), surprisingly, a big difference between both model results is found. Although the BB model can capture the plastic dissipation phenomenon for the ductile film case as the GPA model can, it is much sensitive to the choice of the peeling criterion parameters, and it overestimates the plastic bending effect unable to capture crack tip constraint plasticity. In view of the difficulty of measuring interfacial toughness using peel test method when film is the ductile material, a new test method, split test, is recommended and analyzed using the GPA model. The prediction is applied to a wedge-loaded experiment for Al-alloy double-cantilever beam in literature.

A Novel Inverse Method For Determining The Refractive Indices Of Medium And Dispersed Particles Simultaneously By Turbidity Measurement

The refractive indices of particles and dispersion medium are important parameters in many colloidal experiments using optical techniques, such as turbidity and light scattering measurements. These data are in general wavelength-dependent and may not be available at some wavelengths fitting to the experimental requirement. in this Study we present a novel approach to inversely determine the refractive indices of particles and dispersion medium by examining the consistency of measured extinction cross sections of particles with their theoretical values using a series of trial values of the refractive indices. The colloidal suspension of polystyrene particles dispersed in water was used as an example to demonstrate how this approach works and the data obtained via such a method are compared with those reported in literature, showing a good agreement between both. Furthermore, the factors that affect the accuracy of measurements are discussed. We also present some data of the refractive indices of polystyrene over a range of wavelengths smaller than 400 nm that have been not reported in the available literature. (C) 2008 Elsevier Inc. All rights reserved.

A Pressure-Correction Method And Its Applications On An Unstructured Chimera Grid

In this paper, an unstructured Chimera mesh method is used to compute incompressible flow around a rotating body. To implement the pressure correction algorithm on unstructured overlapping sub-grids, a novel interpolation scheme for pressure correction is proposed. This indirect interpolation scheme can ensure a tight coupling of pressure between sub-domains. A moving-mesh finite volume approach is used to treat the rotating sub-domain and the governing equations are formulated in an inertial reference frame. Since the mesh that surrounds the rotating body undergoes only solid body rotation and the background mesh remains stationary, no mesh deformation is encountered in the computation. As a benefit from the utilization of an inertial frame, tensorial transformation for velocity is not needed. Three numerical simulations are successfully performed. They include flow over a fixed circular cylinder, flow over a rotating circular cylinder and flow over a rotating elliptic cylinder. These numerical examples demonstrate the capability of the current scheme in handling moving boundaries. The numerical results are in good agreement with experimental and computational data in literature. (C) 2007 Elsevier Ltd. All rights reserved.

The effect of the surface tension on non-propagating solitary waves

In this paper, the effect of the surface tension is considered carefully in the study of non-propagating solitary waves. The parameter plane of the surface tension and the fluid depth is divided into three regions; in two of them a breather soliton can be produced. In literature the parameters of breather solitons are all in one of the parameter regions. The new region reported here has been confirmed by our experiments. In the third region, the theoretical solution is a kink soliton, but a kind of the non-propagating solitary wave similar to the breather soliton was found in our experiments besides the kink soliton.

Computation of flow over a rotating body on unstructured Chimera mesh

Flow around moving boundary is ubiquitous in engineering applications. To increse the efficienly of the algorithm to handle moving boundaries is still a major challenge in Computational Fluid Dynamics (CFD). The Chimera grid method is one type of method to handle moving boundaries. A concept of domain de-composition has been proposed in this paper. In this method, sub-domains are meshed independently and governing equations are also solved separately on them. The Chimera grid method was originally used only on structured (curvilinear) meshes. However, in a problem which involves both moving boundary and complex geometry, the number of sub-domains required in a traditional (structured) Chimera method becomes fairly large. Thus the time required in the interior boundary locating, link-building and data exchanging also increases. The use of unstructured Chimera grid can reduce the time consumption significantly by the reduction of domain(block) number. Generally speaking, unstructured Chimera grid method has not been developed. In this paper, a well-known pressure correction scheme - SIMPLEC is modified and implemented on unstructured Chimera mesh. A new interpolation scheme regarding the pressure correction is proposed to prevent the possible decoupling of pressure. A moving-mesh finite volume approach is implemented in an inertial reference frame. This approach is then used to compute incompressible flow around a rotating circular and elliptic cylinder. These numerical examples demonstrate the capability of the proposed scheme in handling moving boundaries. The numerical results are in good agreement with other experimental and computational data in literature. The method proposed in this paper can be efficiently applied to more challenge cases such as free-falling objects or heavy particles in fluid.

基于TCP和MYB基因的表达模式，试探四数苣苔（Bournea sinensis）(苦苣苔科)中次生辐射对称花形成的进化发育途径

花对称性，作为花器官的一个基本而又非常重要的特征，它的进化发育过程，越来越吸引着科学家们的注意力。次生辐射对称花的形成也越来越受到关注。然而在分子发育水平上，除了模式植物金鱼草（Antirrhinum majus）和少数其他种外，次生辐射对称花演化的机制仍然是一个巨大的未被探索的领域。 在金鱼草和柳穿鱼（Linaria vulgaris）中，腹部化反常整齐花的形成各自是由CYC和LCYC基因沉默所致，二者基因沉默分别是由于转座子的插入和DNA广泛甲基化所导致;而在豆科（legumes）中，辐射对称花的形成是由于legCYC基因在五个花瓣上都有表达，这种情况和金鱼草中CYC基因同源异位表达所形成的背部化辐射对称花相似。然而，自然起源的两侧对称花支系中的次生辐射对称花的形成似乎并不是简单的花对称性基因功能丢失或获得。自然形成的次生辐射对称花究竟可能经历了怎样的进化途径？对此，我们选择了广义唇形目（Lamiales sensu lato）中苦苣苔科（Gesneriaceae）植物——四数苣苔（Bouenea sinensis）作为研究对象，通过和模式植物金鱼草的突变体中花对称性基因表达特征比较，结合其近缘种——五数苣苔（Bournea leiophylla）中DIVARICATA在时间和空间上的表达特征，试图揭示苦苣苔科中可能的两侧对称向次生辐射对称花转变的新的演化途径，以及在这种进化过程中所产生的可能的器官丢失或融合现象。 四数苣苔和五数苣苔同属于苦苣苔亚科（Cyrtandroideae）苦苣苔族（Trib.Ramondeae Eritsch）中的四数苣苔属（Bournea Oliv）。该属仅仅有两个种——四数苣苔和五数苣苔，它们都是次生辐射对称花类群中的典型代表，而且两者花发育过程都显示出了由腹部向背部顺序发生和生长的特征。然而和五数苣苔相比，四数苣苔花瓣和雄蕊数目分别少了一枚，拥有四枚花瓣（背部花瓣两枚、两侧花瓣两枚）和四枚雄蕊（背部雄蕊一枚、两侧雄蕊两枚、腹部雄蕊一枚）。从形态特征比较来看，很有可能是四数苣苔在次生辐射对称花形成的过程中，发生了腹部花瓣的丢失和两枚腹部雄蕊愈合成了一枚较大的腹部雄蕊。那么，我们推测在四数苣苔次生辐射对称花形成过程中，花对称性基因即CYC类和DIV类基因在分子水平上发生了变化，这种变化和四数苣苔中次生辐射对称花的形成有关。 基于上述考虑，我们开展了对四数苣苔中花对称性基因——BsCYCLOIDEA、BsDIVARICATA、BsRADALIS以及BsCYCLIND3四个基因共9个拷贝进行了在花组织中表达模式研究。我们在四数苣苔中共分离到了五个拷贝的CYC类基因，分别命名为BsCYC1C-1、BsCYC1C-2、BsCYC1D、BsCYC2A、BsCYC2B。这五个拷贝在保守的TCP区和R区保持了高度的同源性。BsDIV的两个拷贝BsDIV1、BsDIV2也是如此，在保守的两个区domain I、domain II，尤其是在那些螺旋和环结构处，保守性相当高。组织原位杂交结果显示，BsDIV在四数苣苔中的表达非常特别，在金鱼草和五数苣苔中该类基因的表达分两个不同时期，即早期表达和晚期特异性表达，BsDIV在四数苣苔中似乎没有早期表达模式或者在很早期就已经进入到了晚期的表达模式。它在四个花瓣的两侧边缘和四个雄蕊上均等表达，而且这种表达持续时间相对比较长。组织原位杂交结果也得到了RT-PCR结果的支持。有趣的是BsRAD的RT-PCR结果显示，BsRAD在晚期花瓣上只在背部表达，但是在雄蕊上的表达却和金鱼草中AmRAD在背部区域表达不同，它的表达从背部延伸到了两侧和腹部。BsRAD在花器官的第二轮和第三轮的表达显然发生了分化。这种现象可能暗示着BsRAD功能发生了分化。BsRAD和BsDIV在腹部雄蕊上精细的时间空间调控关系可能正是导致腹部雄蕊愈合的原因。RT-PCR结果并没有检测到BsCYC2在晚期花上的表达。原位杂交结果显示BsCYC2在第8期以后表达就基本消失了，从而验证了RT-PCR结果。BsCYC2在早期花原基和早期花器官上都是均匀表达，但在表达消失之前，它在花瓣裂片和花冠筒的分界处则有表达信号，BsCYC2可能和调控花冠筒高度有关。根据Almeida 和 Galego（2002）所说，花冠筒高度的改变依赖于CYC 、DIV基因和其它非主动生长决定因子之间的相互作用。BsCYC1C晚期的RT-PCR结果显示它在背部花瓣、背部雄蕊和两侧雄蕊上均有表达信号，但在腹部花瓣和雄蕊上则没有表达信号，这似乎和四数苣苔由腹部向背部顺序发育的形态特征相符合，说明BsCYC1C可能起到了抑制背部花瓣和背部雄蕊生长的作用。

Cloning of cDNAs encoding C-type lectins from Elapidae snakes Bungarus fasciatus and Bungarus multicinctus

A number of C-type lectins with various biological activities have been purified and characterized from Viperidae snake venoms. In contrast, only a few reports could be found in literature concerning the C-type lectins in Elapidae snake venoms. Based on t

Effect of beta-irradiation on photoluminescence of MOCVD grown GaN

The effect of beta particles interaction on the optical properties of MOCVD grown GaN is reported. A significant change in luminescence properties of GaN is observed after exposing the material with 0.6 MeV beta particles with low dose of 10(12) cm(-2). The results obtained from photoluminescence measurements of irradiated GaN samples in low dose are found contradictory to those reported in literature for samples irradiated with heavy dose (> 10(15) cm(-2)) of electron. An increase in intensity of yellow luminescence has been observed with increasing dose of beta particles which is in disagreement to the already reported results in literature for heavily irradiated samples. A model has been proposed to sort out this inconsistency. The increase in YL intensity at low dose is attributed to the increase in concentration of VGaON complex whereas production of non-radiative VGaON clusters is assumed to justify the decrease in YL intensity at high dose.

Solving MIN UR problem by triangle evolution algorithm with archiving and niche techniques

In this paper, as an extension of minimum unsatisfied linear relations problem (MIN ULR), the minimum unsatisfied relations (MIN UR) problem is investigated. A triangle evolution algorithm with archiving and niche techniques is proposed for MIN UR problem. Different with algorithms in literature, it solves MIN problem directly, rather than transforming it into many sub-problems. The proposed algorithm is also applicable for the special case of MIN UR, in which it involves some mandatory relations. Numerical results show that the algorithm is effective for MIN UR problem and it outperforms Sadegh's algorithm in sense of the resulted minimum inconsistency number, even though the test problems are linear.

The effect of chain flexibility and chain mobility on radiation crosslinking of polymers

Radiation crosslinking of polymers mainly depends on the structure of polymer chain. The flexibility and mobility of chain directly influence the possibility of the reactive radicals recombination. Flexible chain is easier to crosslink than rigid-chain polymer. The latter must be crosslinked at high temperature, as most polymers can only crosslink above their melting point. Structural effect also influences the mechanism of radiation crosslinking of polymers. We find from the results in literature and in our laboratory that, the flexibility chain polymer mainly crosslinked with H type, but the rigid chain polymer mainly crosslinked with Y type. (C) 2001 Published by Elsevier Science Ltd.