Gain and noise figure of a double-pass waveguide amplifier based on Er/Yb-doped phosphate glass

A waveguide amplifier is fabricated by Ag+-Na+ two-step ion exchange on Er/Yb-doped phosphate glass. The spectroscopic performance of glass and the properties of channel waveguide are characterized. A double-pass configuration is adopted to measure the gain and noise figure (NF) of the waveguide amplifier, and the comparison of gain and NF for the single and double-pass configuration of the waveguide amplifier is presented. The results show that the double-pass configuration can make the gain increase from 8.8dB (net gain 2.2dB/cm) of the single-pass one to 14.6 dB (net gain 3.65 dB/cm) for small input power at 1534 nm, and the NF are all lower than 5.5dB for both the configurations.

H[DEHP]从不同介质中萃取稀土（III）(Sc、Y、Ho、Er、Yb、Lu)及Fe(III)、Zn(II)的机理

本文分另研究了H[DEHP]从不同酸性介质中萃取稀土（III）(Sc、Y、Ho、Er、yb、Lu)及Fe(III)、Zn(II)的机理及性能。一、H[DEHP]从 H_2SO_4介质中萃取Sc(III)的机理 1. H[DEHP]萃取H_2SO_4及其机理 2. H[DEHP]萃取Sc(III)的机理，用斜率法和饱和法确定了H[DEHP]的正庚烷溶液从H_2SO_4溶液中萃取Sc_2(SO_4)_3的机理及萃合物组成。研究表明，H[DEHP]萃取Sc(III)在高、低两种酸度范围内存在着两种不同的萃取机理。二、H[DEHP]从HCl介质中萃取Ln(III)和Fe(III)的性能及H[DEHP]萃取Ln(III)的机理研究了H[DEHP]的正庚烷溶液从HCl介质中萃取稀土（III）(Sc、Y、Ho、Er、Yb、Lu)和Fe(III)的性能，得出H[DEHP]在相同条件下萃取以上各金属离子的顺序是：Sc(III)>Fe(III)>Lu(III)>Yb(III)>Er(III)>Y(III)>Ho(III), 并计算了各金属离子之间的分离因素（β）。文中还讨论了Sc(III)、Fe(III)、Lu(III)之间的分离以及重稀土离子间的萃取分离，同时与相同实验条件下HEH[EHP]的萃取性能进行了比较，为新的萃取体系提供了一些参数。三、H[DEHP]从不同介质中萃取Fe(III)的机理，研究了H[DEHP]的正率烷溶液从Hcl介质中和H[DEHP]的正庚烷溶液从H_2SO_4介质中萃取Fe(III)的平衡规律；用斜率法、饱和法以及IR和NMR谱等讨论了低酸度下的萃取机理。四、H[DEHP]萃取Zn(II)的机理，研究了H[DEHP]的正率烷溶液从Hcl介中萃取Zn(II)的平衡，利用斜率法、饱和法及SR、NMR谱等讨论了低Hcl浓度下的萃取机理。

Syntheses and crystal structures of bis(tetrahydrofurfurylindenyl) lanthanocene chlorides (C4H7OCH2C9H6)(2)LnCl (Ln = Nd, Sm, Dy, Ho, Er, Yb)

Reaction of anhydrous lanthanide trichlorides with tetrahydrofurfuryl indenyl lithium in THF afforded bis(tetrahydrofurfurylindenyl) lanthanocene chlorides complexes (C4H7OCH2C9H6)(2) LnCl, Ln = Nd (1), Sm (2), Dy (3), Ho (4), Er (5), Yb (6). The X-ray crystallographic structures of all the six complexes were determined and these indicate that they are unsolvated nine-coordinate monomeric complexes with a trans arrangement of both the sidearm and indenyl rings in the solid state. They belong to the same crystal system (orthorhombic) and space group (P2(1)2(1)2(1)) with the same structure. Especially, they are more stable to air and moisture than the corresponding unsubstituted indenyl lanthanide complexes.

上转换效应对Er3+-Yb3+共掺磷酸盐玻璃被动调Q 激光输出的影响

To study the effects of upconversion in Erbium, a set of rate equations that simulates the performance of the passively Q-switched Er:Yb:glass laser with a Co²⁺:MgAl2O4 saturable absorber was set up. The dynamics of the Er³⁺ excited state and the effect of upconversion on the passively Q-switched laser are obtained through numerical simulation of the model. It is found that the impact ratios of upconversion effect on the peak power of the passively Q-switched laser pluse and the repetition rate are both decreased with the increase of pump power.

Growth and spectral properties of Gd2SiO5 crystal codoped with Er and Yb

Gd2SiO5 (GSO) single crystal codoped with Yb3+ and Er3+ (Abbr. as Er:Yb:GSO) was successfully grown by the Czochralski (CZ) method for the first time and the spectral characteristics were investigated. The absorption and fluorescence spectra were measured. The emission lifetime of the I-4(13/2)-Er-level was measured to be 5.84ms and the emission cross-section at 1529nm was calculated to be 1.03 x 10(-20) cm(2). The results indicate that Er:Yb:GSO is a potential laser material at similar to 1. 55 mu m wavelength region. (c) 2006 Elsevier B.V. All rights reserved.

Novel Near-Infrared Luminescent Hybrid Materials Covalently Linking with Lanthanide [Nd(III), Er(III), Yb(III), and Sm(III)] Complexes via a Primary beta-Diketone Ligand: Synthesis and Photophysical Studies

A series of novel, colorless, and transparent sot-gel derived hybrid materials Ln-DBM-Si covalently grafted with Ln(DBM-OH)(3)center dot 2H(2)O (where DBM-OH = o-hydroxydibenzoylmethane, Ln = Nd, Er, Yb, and Sin) were prepared through the primary beta-diketone ligand DBM-OH. The structures and optical properties of Ln-DBM-Si were studied in detail. The investigation results revealed that the lanthanide complexes were successfully in situ grafted into the corresponding hybrids Ln-DBM-Si. Upon excitation at the maximum absorption of ligands, the resultant materials displayed excellent near-infrared luminescence.

Near-infrared luminescent mesoporous materials covalently bonded with ternary lanthanide [Er(III), Nd(III), Yb(III), Sm(III), Pr(III)] complexes

New near-infrared-luminescent mesoporous materials were prepared by linking ternary lanthanide (Er3+, Nd3+, Yb3+, Sm3+, Pr3+) complexes to the ordered mesoporous MCM-41 through a functionalized 1,10-phenanthroline (phen) group 5-(N,N-bis-3-(triethoxysilyl)propyl)ureyl-1,10-phenanthroline. The resulting materials (denoted as Ln(hfth)(3)phen-M41 and Pr(tfnb)(3)phen-M41; Ln=Er, Yb, Nd, Sm; hfth = 4,4,5,5,6,6,6-heptafluoro-1-(2-thienyl)hexane-1,3-dionate; tfnb = 4,4,4-trifluoro-1-(2-naphthyl)- 1, 3-butanedionate) were characterized by powder X-ray diffraction, N-2 adsorption/desorption, and elemental analysis. Luminescence spectra of these lanthanide-complex functionalized materials were recorded, and the luminescence decay times were measured. Upon excitation at the absorption of the organic ligands, all these materials show the characteristic NIR luminescence of the corresponding lanthanide (Er3+, Nd3+, Yb3+, Sm3+, Pr3+) ions by sensitization from the organic ligands moiety. The good luminescent performances enable these NIR-luminescent mesoporous materials to have possible applications in optical amplification (operating at 1300 or 1500 nm), laser systems, or medical diagnostics.

高功率光子晶体光纤激光器研究进展

光子晶体光纤的出现，为高功率光纤激光器的关键技术-大模区光纤的实现提供了新途径。基于铒镱共掺磷酸盐材料的包层掺杂新结构出现，为实现更加紧凑的光纤激光器提供了可能。常规高功率光纤激光器中的抽运技术，谐振腔技术和相干组束技术也在不断融入高功率光子晶体光纤激光器。高功率光子晶体光纤激光器的调Q和锁模输出也已经实现。

Demonstration of microfiber knot laser

The authors demonstrate a 1.5 mu m wavelength microfiber laser formed by tightening a doped microfiber into a knot in air. The 2-mm-diameter knot, assembled using a 3.8-mu m-diameter microfiber that is directly drawn from Er:Yb-doped phosphate glass, serves as both active medium and resonating cavity for lasing. Single-longitudinal-mode laser with threshold of about 5 mW and output power higher than 8 mu W is obtained. Their initial results suggest a simple approach to highly compact lasers based on doped microscale optical fibers. (c) 2006 American Institute of Physics.

A novel ultra-narrow transmission-band fiber Bragg grating and its application in a single-longitudinal-mode fiber laser with improved efficiency

A novel design approach to ultra-narrow transmission-band fiber Bragg grating (FBG) is proposed and demonstrated for the first time. The new grating consists of multiple identical distributed-Bragg reflector (DBR) cavities and a it-phase-shifted gap, and hence, the proposed laser is constructed by the cascade of these identical DBR fiber lasers. By manufacturing the proposed grating in a piece of Er-Yb codoped fiber, a single-wavelength single-longitudinal-mode (SLM) fiber laser with improved efficiency is demonstrated experimentally. The experimental results show that the pump-to-signal conversion efficiency of the proposed laser is improved by a factor of two in comparison with the optimized distributed-feedback (DFB) fiber lasers. (c) 2007 Elsevier B.V. All rights reserved.

A novel dual-wavelength DFB fiber laser based on symmetrical FBG structure

A novel grating structure is proposed and demonstrated to obtain stable dual-wavelength (DW) distributed-feedback (DFB) fiber lasers at room temperature. The proposed grating is based on a symmetrical structure, where one half is periodically sampled by "0"-to-"pi" period and the other half is done by "pi"-to-"0" period. This structure can create two separated resonance cavities and hence achieve the stable DW lasing operation. By fabricating the proposed grating on a piece of Er: Yb-codoped fiber, we experimentally obtain a stable DW-DFB fiber laser with wavelength spacing of similar to 440 pm at room temperature.

Eye-safe, high-energy, single-mode all-fiber laser with widely tunable repetition rate

We present a novel high-energy, single-mode, all-fiber-based master-oscillator-power-amplifier (MOPA) laser system operating in the C-band with 3.3-ns pulses and a very widely tunable repetition rate, ranging from 30 kHz to 50 MHz. The laser with a maximum pulse energy of 25 mu J and a repetition rate of 30 kHz is obtained at, a wavelength of 1548 nm by using a double-clad, single-mode, Er:Yb co-doped fiber power amplifier.

EDWA用基础玻璃的光谱特性研究

制备了掺Er¨ 和Er¨／Yb¨共掺的可用于EDWA(掺铒波导放大器)的Na20．B，0 ．SiO， 玻璃．吸收光谱特性表明：不同掺杂Er20 浓度基础玻璃峰位置基本相同，但玻璃在相同波长处的 吸收率随着Er203浓度的增加而增大；光敏剂Yb 0 的加入明显增大了样品在978 nm处的吸收面 积；荧光光谱特性表明：随着Er O 浓度的增加玻璃在1536 nm处的荧光半高宽(FWHM)由80 nm 减小到40 nm，从而确定本体系的Er20 掺杂浓度为0．2 mo1％ 左右较好．

Cyanex302及CA-12萃取稀土动力学的研究

随着萃取技术的不断发展，人们日益要求更加深入的了解萃取过程的机制及其动力学特性。以便有效地控制和强化萃取过程，提高萃取效率，或者利用萃取动力学的差异来实现某些分离嘴过程。尽管许多萃取过程进行得很快，但是人们也发现不少的金属鳌合物萃取体系，其萃取过程相当缓慢。因而这类体系的萃取机制和萃取动力学问题已日益引人注目。除此而外，在设计，放大或改进萃取设备时，研究和掌握有关萃取过程的动力学规律也有十分重要意义。在本文中主要对稀土萃取动力学进行了研究，得到主要结果如下：1．研究了硫代有机磷酸Cyan.ex302萃取饵的动力学。通过测定各种萃取条件对萃取速率的影响，获得了萃取速率方程，并讨论了萃取的控制过程。实验发现萃取剂中的杂质对萃取具有较大的加速作用，这对工业生产具有一定的实际意义。2.用两相滴定法测定了两种新合成的J梭酸萃取剂CA-12和CA-100的某些重要的物理常数。这将有助于深入研究它们的萃取性质及机理。3．用层流恒界面池研究了CA-12萃取La, Gd,Er, Yb和Y的动力学。考察了各种因素对萃取速率的影响，获得了它们的萃取速率方程，实验发现了它们的萃取控速步骤并推测了其萃取机理。4．研究了HEHEHP对CA-12萃取Yb和Y的动力学的影响。实验发现在CA一12中加入少量的HEHEHP后，萃取活化能显著降低，萃取速率明显加快。由于加入HEHEHP后，萃取Yb的活化能的降低要比萃取Y的活化能降低的程度大'，所以使Yb和Y的萃取分离因素加大。5．用两相滴定法研究了HEHEHP萃取铭的机理，CA-12萃取稀土及其相关离子的机理。并计算了它们相应的平衡常数。