CO2浓度和温度升高对红桦可溶性蛋白含量和分配的影响

随着工业化的发展，大气中二氧化碳的浓度(CO2)预测从现在的平均350μmol·mol-1升高到2030年的570μmol·mol-1，其增温作用将持续多个世纪。植被在大气二氧化碳减排以及调控区域水热状况过程中起重要作用，而其机理过程目前十分不清楚。本实验应用自控、封闭、独立生长室，研究了CO2浓度和温度升高对红桦根、茎、叶和枝可溶性蛋白含量和分配的影响，从蛋白水平上来解释川西亚地区的建群种-红桦对CO2升高和温度升高及其交互作用的响应规律，为全球气候变暖川西亚高山的植被保护和恢复提供理论依据。研究结果表明： 1. CO2浓度升高增加了可溶性蛋白的总量，改变了可溶性蛋白分配模式，即，可溶性蛋白分配到根的比例增加，分配到茎、枝、叶的比例减少。可能意味：在CO2浓度升高条件下，红桦根系的生长和营养物质吸收功能将会增强。 2. CO2浓度升高增加了根和茎的清蛋白含量，降低了叶片的清蛋白含量，叶片的球蛋白含量、醇溶蛋白含量和谷蛋白含量均增加。表明CO2浓度升高增加了清蛋白在根中积累，球蛋白、醇溶蛋白和谷蛋白大量在叶片中积累；前人研究所指出的CO2浓度升高使植物叶片可溶性蛋白的含量降低可能仅仅是由于清蛋白含量的降低造成的。 3. 温度升高使红桦幼苗整株所含可溶性蛋白总量增加，但可溶性蛋白总量的分配因红桦幼苗器官的不同而异。温度升高下根、茎、叶和枝的分配量分别占总可溶性蛋白的27.74%、35.57%、23.00%、13.68%，即茎＞根＞叶＞枝。对照的根茎叶枝的分配量分别占总可溶性蛋白的21.01%、41.41%、23.08%、14.50%，即茎＞叶＞根＞枝。表明温度升高使可溶性蛋白分配到根的比例增加，有利于根的可溶性蛋白的积累，增强了根吸收水分和矿质营养的能力，从而有利于根系的生长。 4. 温度升高处理下清蛋白和球蛋白在根中含量升高，在茎、叶和枝中含量下降，但没有达到显著水平；醇溶蛋白在根和叶中含量显著增加；谷蛋白在茎中的含量显著降低。表明温度升高增加清蛋白和球蛋白在红桦幼苗根部的积累，也有利于根和叶醇溶蛋白的积累，但不利于谷蛋白在茎的积累；温度升高条件下叶片可溶性蛋白升高是醇溶蛋白在叶片中积累的结果。 5. CO2浓度和温度同时升高条件下红桦幼苗的可溶性蛋白总量增加很少，只有分配到茎的可溶性蛋白比例增加，并且对可溶性蛋白分配规律没有影响。CO2和温度同时升高下红桦幼苗枝的可溶性蛋白含量的降低是可溶性蛋白总量的降低而不是碳水化合物稀释的结果，并且CO2和温度同时升高对红桦幼苗的生长没有明显的促进作用。 6. CO2和温度同时升高处理对可溶性蛋白含量有显著影响。清蛋白含量在根、茎、叶和枝中均降低，球蛋白含量在根中显著降低，醇溶蛋白含量在根、茎、叶和枝中均降低，谷蛋白含量在根中显著降低。表明CO2浓度和温度同时升高对根的影响显著，即降低了根的可溶性蛋白含量，可能导致根的吸收能力下降。 7. 因此，CO2和温度同时升高对可溶性蛋白影响不能简单地通过CO2和温度单因子影响机理来解释。 It is well known that atmospheric CO2 concentration and temperature are increasing as a consequence of human activities. Atmospheric CO2 concentration are predicted to increase from 350μmol·mol-1 now to 570μmol·mol-1 2030. And temperature will continue to increase for several centuries as a result of CO2 enrichment. Vegetation play a key role in reducing atmospheric CO2 and adapting and controlling warter and energy process in a certain region, while the underlying mechanism are not clear, yet. Betula albo-sinensis, as the dominating tree species of subalpine dark coniferous forest in west Sichuan province, play an important role in determing structure and function of forest ecosystem. In our study, effects of elevated atmospheric CO2 concentration (ambient±350±25μmol·mol-1), increased temperature (ambient±2.0±0.5℃) and their combination on contents and allocation of soluble protein were studied in independent and enclosed-top chamber system under high-frigid conditions. Chambers with ambient CO2 concentration and temperature are taken as control. The results are as the following, 1) Elevated atmospheric CO2 increased the accumulation of total weight of soluble protein in whole plant and changed allocation of soluble protein in red birch by increasing its allocation to roots and reducing its allocation to stem. This caused much more accumulation of soluble protein in roots which might help to prompt growth, development and nutrient absorption ability of roots. 2) Treatment EC increased content of albumin in roots and stems, reduced the content of albumin in leaves, and increased the content of globulin, promalin and glutenin in leaves. That is to say EC increased the accumulation of albumin in roots and accumulation of globulin, promalin and glutenin in leaves. The reduced soluble protein contents in plant leaves by EC, as reported by former researchers, are mainly resulted from the reduced content of albumin in leaves. 3) Elevated temperature increased the total of soluble proteins, but its allocation was dependent on organs. In treatment ET, roots, stems, leaves and branches take 27.74%, 35.57%, 23.00% and 13.68% of total weight of soluble protein. In treatment CK, roots, stems, leaves and branches take 21.01%, 41.41%, 23.08% and 14.50%. Elevated temperature changed allocation of soluble proteins in that it stimulated soluble proteins accumulation in roots and improved the uptake of water in roots. 4) Treatment ET increased the content of albumin and globulin in roots, and reduced the content of albumin and globulin in stems, leaves and branches. The content of promalin in roots and leaves was increased significantly, and the content of glutenin in stems was reduced significant. This suggested that ET stimulated the accumulation of albumin and globulin in roots and accumulation of promalin in leaves and roots; that treatment ET increased content of soluble protein in leaves was mainly resulted from the increased promalin content in leaves. 5) Regarding treatment ETC, the total of weight of soluble proteins increased, but not significantly; but increased in stems. So the combination of elevated atmospheric CO2 and temperature had not changed the allocation of soluble proteins in red birch seedling and reduced soluble proteins in branches were not the result of increased carbohydrate. 6) Treatment ETC reduced the content of albumin and promalin in roots, stems, leaves and branches, reduced the content of globulin and glutenin in roots significantly. That is to say elevated atmospheric CO2 and temperature reduced the content of soluble proteins in roots significantly which might help to prompt growth, development and nutrient absorption ability of roots. 7) The effects of elevated atmospheric CO2 and temperature on soluble protein cannot be simply interpreted through their mechanism that obtained when they were imposed on plant separately.

Photoregulated or energy dependent process of hormogonia differentiation in Nostoc sphaeroides Kutzing (Cyanobacterium)

Hormogonium, which was thought to play an important role in the dispersal and survival of these microorganisms in their natural habitats, is a distinguishable developmental stage of heterocystous cyanobacteria. The present study examined the effects of different light conditions and sugars on the differentiation of Nostoc sphaeroides Kutzing to the hormogonia stage. Results showed that differentiation of hormogonia was light dependent in the absence of sugar, but that close to 100% of cyanobacteria differentiated to hormogonia in the presence of glucose or sucrose, irrespective of the light conditions. This differentiation was inhibited, even in the presence of sugars, upon application of an inhibitor of respiration. Following the testing of different sugars, the effects of different lights were examined. It was found that 5 10 μ mol.m(-2)• s(-1) photon flux density was optimal for hormogonia differentiation. One hundred percent differentiation was obtained with white light irradiation, in contrast with irradiation with green light (80% differentiation) and red light (0-10% differentiation). Although they showed different efficiencies in inducing hormogonia differentiation in N. sphaeroides, the green and red radiation did not display antagonistic effects. When the additional aspect of time dependence was investigated through the application of different light radiations and an inhibitor of protein synthesis, it was found that the initial 6 h of the differentiation process was crucial for hormogonia differentiation. Taken together, these results show that hormogonia differentiation in N. sphaeroides is either a photoregulated or an energy dependent process.

低能He~(2+)与He原子碰撞转移电离出射电子能谱研究；Investigation on Electron Energy Spectra of Transfer Ionization Process in 70 and 100 keV He~(2+) Colliding on He

利用反应显微成像谱仪对70和100keV He2+与He原子碰撞转移电离(TI)过程中不同出射角度的电子能谱进行了测量,观测到出射电子能谱具有如下分布特征:出射电子速度分布介于0和入射离子速度vp之间;在不同出射角度电子能谱分布均有一极大值存在,随着出射角度的增大,能谱分布极大值逐渐减小;当电子出射角度等于45°时,多数电子集中在0eV附近。上述特征可由低能离子-原子碰撞"准分子"模型进行定性解释。在100keV He2+-He转移电离出射电子能谱中有靶电子被俘获至散射离子连续态(electron capture to continuum,简称ECC)电子的贡献,这可看做是动力学两步过程的作用。

Energy transfer and tunable luminescence properties of Eu3+ in TbBO3 microspheres via a facile hydrothermal process

Tb(1-x)BO3:xEu(3+) (x = 0-1) microsphere phosphors have been successfully prepared by a simple hydrothermal process directly without further sintering treatment. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), photoluminescence (PL), low-voltage cathodoluminescence (CL), and time-resolved emission spectra as well as lifetimes were used to characterize the samples.

Formation of low surface energy separators with undercut structures via a full-solution process and its application in inkjet printed matrix of polymer light-emitting diodes

In this paper, low surface energy separators With undercut structures were fabricated through a full solution process, These low Surface energy separators are more suitable for application in inkjet printed passive-matrix displays of polymer light-emitting diodes. A patterned PS film was formed on the P4VP/photoresist film by microtransfer printing firstly. Patterned Au-coated Ni film was formed on the uncovered P4VP/photoresist film by electroless deposition. This metal film was used as mask to pattern the photoresist layer and form undercut structures with the patterned photoresist layer. The surface energy of the metal film also decreased dramatically from 84.6 mj/m(2) to 21.1 mJ/m(2) by modification of fluorinated mercaptan self-assemble monolayer on Au surface. The low surface energy separators were used to confine the flow of inkjet printed PFO solution and improve the patterning resolution of inkjet printing successfully. Separated PFO stripes, complement with the pattern of the separators, formed through inkjet printing.

Preliminary Studies of Practicability of Laminar Plasma Surface Treatment Process

The basic remelting and cladding tests with laminar plasma technology on metals have been conducted in order to demonstrate the possibility of the technology applied in material surface modification. The experimental results show that the properties of the modified layers of the cast iron surface can be improved notably by the remelting treatment and those of the stainless steel by the cladding treatment. The related results are also verified by microscopic studies such as scanning electron microscopic (SEM) observations, energy dispersive spectra (EDS) analysis and the Vickers hardness measurements of the surface modified layers.

Microdamage Evolution, Energy Dissipation and Their Trans-Scale Effects on Macroscopic Failure

The process of damage evolution concerns various scales, from micro- to macroscopic. How to characterize the trans-scale nature of the process is on the challenging frontiers of solid mechanics. In this paper, a closed trans-scale formulation of damage evolution based on statistical microdamage mechanics is presented. As a case study, the damage evolution in spallation is analyzed with the formulation. Scaling of the formulation reveals that the following dimensionless numbers: reduced Mach number M, damage number S, stress wave Fourier number P, intrinsic Deborah number D*, and the imposed Deborah number De*, govern the whole process of deformation and damage evolution. The evaluation of P and the estimation of temperature increase show that the energy equation can be ignored as the first approximation in the case of spallation. Hence, apart from the two conventional macroscopic parameters: the reduced Mach number M and damage number S, the damage evolution in spallation is mainly governed by two microdamage-relevant parameters: the Deborah numbers D* and De*. Higher nucleation and growth rates of microdamage accelerate damage evolution, and result in higher damage in the target plate. In addition, the mere variation in nucleation rate does not change the spatial distribution of damage or form localized rupture, while the increase of microdamage growth rate localizes the damage distribution in the target plate, which can be characterized by the imposed Deborah number De*.

Energy principle of ferroelectric ceramics and single domain mechanical model

Many physical experiments have shown that the domain switching in a ferroelectric material is a complicated evolution process of the domain wall with the variation of stress and electric field. According to this mechanism, the volume fraction of the domain switching is introduced in the constitutive law of ferroelectric ceramic and used to study the nonlinear constitutive behavior of ferroelectric body in this paper. The principle of stationary total energy is put forward in which the basic unknown quantities are the displacement u (i) , electric displacement D (i) and volume fraction rho (I) of the domain switching for the variant I. Mechanical field equation and a new domain switching criterion are obtained from the principle of stationary total energy. The domain switching criterion proposed in this paper is an expansion and development of the energy criterion. On the basis of the domain switching criterion, a set of linear algebraic equations for the volume fraction rho (I) of domain switching is obtained, in which the coefficients of the linear algebraic equations only contain the unknown strain and electric fields. Then a single domain mechanical model is proposed in this paper. The poled ferroelectric specimen is considered as a transversely isotropic single domain. By using the partial experimental results, the hardening relation between the driving force of domain switching and the volume fraction of domain switching can be calibrated. Then the electromechanical response can be calculated on the basis of the calibrated hardening relation. The results involve the electric butterfly shaped curves of axial strain versus axial electric field, the hysteresis loops of electric displacement versus electric filed and the evolution process of the domain switching in the ferroelectric specimens under uniaxial coupled stress and electric field loading. The present theoretic prediction agrees reasonably with the experimental results given by Lynch.

Energy conversions and storage caused by an unsteady poloidal flow in active solar regions

In this paper we discuss coupling processes between a magnetic field and an unsteady plasma motion, and analyze the features of energy storage and conversions in active region. It is pointed out that the static force-free field is insufficient for a discussion of storage processes, and also the pure unsteady plasma rotation is not a perfect approach. In order to analyze the energy storage, we must consider the addition of poloidal plasma motion. The paper shows that because the unsteady poloidal flow is added and coupling occurs between the magnetic field and both the toroidal and the poloidal plasma flows, an unsteady process is maintained which changes the force-free factor with time. Hence, the energy in the lower levels can be transferred to the upper levels, and a considerable energy can be stored in the active region. Finally, another storage process is given which is due to the pure poloidal flow. The article shows that even if there is no twisted magnetic line of force, the energy in the lower levels may still be transferred to the upper levels and stored there.

Energy Functions And Basic Equations For Ferroelectrics

Energy functions (or characteristic functions) and basic equations for ferroelectrics in use today are given by those for ordinary dielectrics in the physical and mechanical communications. Based on these basic equations and energy functions, the finite element computation of the nonlinear behavior of the ferroelectrics has been carried out by several research groups. However, it is difficult to process the finite element computation further after domain switching, and the computation results are remarkably deviating from the experimental results. For the crack problem, the iterative solution of the finite element calculation could not converge and the solutions for fields near the crack tip oscillate. In order to finish the calculation smoothly, the finite element formulation should be modified to neglect the equivalent nodal load produced by spontaneous polarization gradient. Meanwhile, certain energy functions for ferroelectrics in use today are not compatible with the constitutive equations of ferroelectrics and need to be modified. This paper proposes a set of new formulae of the energy functions for ferroelectrics. With regard to the new formulae of the energy functions, the new basic equations for ferroelectrics are derived and can reasonably explain the question in the current finite element analysis for ferroelectrics.

The mechanism of PEO process on Al–Si alloys with the bulk primary silicon

This study focuses on mechanism of ceramic coating on Al-Si alloys with bulk primary Si using plasma electrolytic oxidation (PEO) technology. Al-Si alloys with 27-32% Si in weight were used as substrates. The morphologies, composition and microstructure of PEO coatings were investigated by scanning electron microscopy (SEM) with energy dispersive X-ray system (EDX). Results showed that the PEO process had four different stages. The effect of bulk Si is greatly on the morphology and composition of coatings at first three stages. Anodic oxide films formed on Al and Si phases, respectively. When the voltage exceeded 40 V, glow appeared and concentrated on the localized zone of interface of Al and Si phase. Al-Si-O compounds formed and covered on the dendrite Si phase surface, and the coating on bulk Si, which was silicon oxide, was rougher than that on other phase. If the treatment time was long enough, the coatings with uniform surface morphologies and elements distribution will be obtained but the microstructure of inner layer is looser due to the bulk Si.

Nematic ordering pattern formation in the process of self-organization of microtubules in a gravitational field

Papaseit et al. (Proc. Nati. Acad. Sci. U.S.A. 97, 8364, 2000) showed the decisive role of gravity in the formation of patterns by assemblies of microtubules in vitro. By virtue of a functional scaling, the free energy for MT systems in a gravitational field was constructed. The influence of the gravitational field on MT's self-organization process, that can lead to the isotropic to nematic phase transition, is the focus of this paper. A coupling of a concentration gradient with orientational order characteristic of nernatic ordering pattern formation is the new feature emerging in the presence of gravity. The concentration range corresponding to a phase coexistence region increases with increasing g or NIT concentration. Gravity facilitates the isotropic to nernatic phase transition leading to a significantly broader transition region. The phase transition represents the interplay between the growth in the isotropic phase and the precipitation into the nematic phase. We also present and discuss the numerical results obtained for local NIT concentration change with the height of the vessel, order parameter and phase transition properties.