障碍物结构对管道中预混火焰加速的影响

在一端封闭、一端开口的火焰传播管中均匀布置障碍物，研究了障碍物结构对管道中预混火焰传播的影响。结果表明，由于障碍物的扰动，火焰不断加速，在阻塞比相同的条件下，最终的火焰稳态速度与障碍物的形状和间距基本无关，其中障碍物间距仅仅影响火焰的加速速率，在障碍物间距约等于火焰传播管内径（W/D ≈ 1.0）时，平均火焰速度达到最大值，火焰到达稳态传播的距离最短。同时，本文用一维简化模型模拟了火焰在障碍物管道中的加速过程，计算结果与实验测试结果在定性上比较吻合，说明在管内火焰速度较低的情况下，用一维可压缩流动近似处理能初步揭示管内火焰的加速机制。

工程地质三维建模与可视化技术应用开发

Synthetic Geology Information System (SGIS) is an important constituent part of the theory of Engineering Geomechanics Mate-Synthetic (EGMS), and is the information system more suited for the collection, storage, management, analysis and processing to the information coming from engineering geology,' geological engineering and geotechnical engineering. Its contents involve various works and methods of the investigation, design, and construction in different stages of the geological engineering. Engineering geological and three-dimensional modeling and visualization is the fundamental part of the SGIS, and is a theory, method and technique by which, adopting the computer graphics and image processing techniques, the data derived from engineering geological survey and the calculated results obtained from the geomechanical numerical simulation and analysis are converted to the graphics and images displayed on the computer screen and can be processed interactively. In this paper, the significance and realizing approaches of the three-dimensional modeling and visualization for the complex geological mass in the engineering geology are discussed and the methods of taking advantage of the interpolation and fitting for the scattered and field-surveyed data to simulate the geological layers, such as the topography and earth surface, the groundwater table and the stratum boundary, are researched into. At the mean time, in mind the characteristics of the structure of the basic data for three-dimensional modeling, its visual management can be resolved into the engineering surveyed database management module, plot parameter management module and data output module and the requirement for basic data management can be fulfilled. In the paper, the establishment and development of the three-dimensional geological information system are probed tentatively, and an instance of three-dimensional visual Engineering Distribution Information System (EDIS), theConstruction Management Information System for an airport, in which the functions, such as the real-time browse among the three-dimensional virtual-reality landscapes of the airport construction from start to finish, the information query to the airport facility and the building in the housing district and the recording and playback of the animation sets for the browse and the takeoff and landing of the planes, is developed by applying the component-mode three-dimensional virtual-reality geological information system (GIS) software development kits (SDK), so the three-dimensional visual management platform is provided for the airport construction. Moreover, in the gaper, integrated with the three-dimensional topography visualization and its application in the Sichuan-Tibet Highways, the method of the digital elevation model (DEM) data collection from the topographic maps is described, and the three-dimensional visualization and the roaming about the terrain along the highway are achieved through computer language programming. Understanding to the important role played by the varied and unique topographical condition in the gestation and germination of the highly-dense, frequently-arising and severely-endangered geological hazards can be deepened.

The stripe-backed weasel Mustela strigidorsa: taxonomy, ecology, distribution and status

1. The stripe-backed weasel Mustela strigidorsa is one of the rarest and least-known mustelids in the world. Its phylogenetic relationships with other Mustela species remain controversial, though several unique morphological features distinguish it from congeners. 2. It probably lives mainly in evergreen forests in hills and mountains, but has also been recorded from plains forest, dense scrub, secondary forest, grassland and farmland. Known sites range in altitude from 90 m to 2500 m. Data are insufficient to distinguish between habitat and altitudes which support populations, and those where only dispersing animals may occur. 3. It has been confirmed from many localities in north-east India, north and central Myanmar, south China, north Thailand, north and central Laos, and north and central Vietnam. Given the limited survey effort, the number of recent records shows that the species is not as rare as hitherto believed. Neither specific nor urgent conservation needs are apparent.

Report on some species of Palaemonidae (Crustacea, Decapoda) from French Polynesia

Based on material collected from French Polynesia and deposited in the Museum national d'Histoire naturelle, Paris, the present paper reports 31 palaemonid shrimp species, which belong to the Palaemoninae (two genera, three species) and to the Pontoniinae (12 genera, 28 species), including six new species. The new species are: Izucaris crosnieri n. sp., Periclimenes alexanderi n. sp., P. josephi n. sp., P platydactylus n. sp., P polynesiensis n. sp. and P vicinus n. sp. Detailed descriptions and illustrations of the new species are provided. Besides the six new species, ten other species are recorded for the first time from French Polynesia: Exoclimenella maldivensis Duris & Bruce, 1995, Kemponia rapanui (Fransen, 1987) n. comb., Palaemonella crosnieri Bruce, 1978, P spinulata Yokoya, 1936, Periclimenaeus hecate (Nobili, 1904), P orbitocarinatus Fransen, 2006, Periclimenes aleator Bruce, 199 1, P paralcocki Li & Bruce, 2006, P uniunguiculatus Bruce, 1990, Pontonides loloata Bruce, 2005.

Further Indo-West Pacific palaemonoid shrimps (Crustacea : Decapoda : Palaemonoidea), principally from the New Caledonian region

Based on the material deposited in the Museum national d'Histoire naturelle, Paris, collected from the Indo-West Pacific, principally from the New Caledonian region, the present paper reports 117 palaemonoid shrimp species, which belong, respectively, to Anchistioididae ( one genus, one species), Gnathophyllidae ( one genus, one species), Palaemonidae Palaemoninae ( seven genera, nine species), and Palaemonidae Pontoniinae ( 30 genera, 106 species), including eight new species. The new species are all Pontoniinae: Mesopontonia brevicarpalis sp. nov., Palaemonella komaii sp. nov., Periclimenes crosnieri sp. nov., Periclimenes forgesi sp. nov., Periclimenes loyautensis sp. nov., Periclimenes paralcocki sp. nov., Periclimenes paraleator sp. nov., and Periclimenes pseudalcocki sp. nov. The last six new species are members of the deep-water "Periclimenes alcocki species complex'', which has more than two ( usually four) pairs of dorsolateral telson spines anterior to the posterior telson margin, the cornea is usually reduced, the dactyl of the major second chela is generally flanged and the chela is sometimes covered with small tubercles. The complex is usually found at more than 200m depth in the West Pacific. The species can be distinguished from each other by the armature of ambulatory propod and dactyl, diameter of cornea, rostrum shape and the number of pairs of dorsolateral telson spines. Mesopontonia brevicarpalis sp. nov., from the southeast coast of Africa, is the seventh species of the genus. Palaemonella komaii sp. nov. is very similar to Palaemonella dolichodactylus Bruce, 1991 and Palaemonella hachijo Okuno, 1999. These three species share the features of very long and slender ambulatory pereiopods with the dactyl more than eight times longer than its basal depth and with several long setae on the dorsal dactylar margin.