Molecular evidence for double maternal origins of the diploid hybrid Hippophae goniocarpa (Elaeagnaceae)

Homoploid hybrid plant species are rare, and the mechanisms of their speciation are largely unknown, especially for homoploid hybrid tree species. Two contrasting hypotheses have been proposed to explain the origin of Hippophae goniocarpa: (1) it is a diploid hybrid originating from H. rhamnoides ssp. sinensis x H. neurocarpa ssp. neurocarpa, and (2) it originated via marginal differentiation from H. rhamnoides ssp. sinensis. Regardless of which of these hypotheses is true (if either), previous studies have suggested that H. rhamnoides ssp. sinensis is the only maternal donor for this hybrid species. In this study, we aim to elucidate the maternal composition of H. goniocarpa and to test the two hypotheses. For this purpose, we sequenced the maternal chloroplast DNA trnL-F region of 75 individuals representing H. goniocarpa, H. rhamnoides ssp. sinensis, and H. neurocarpa ssp. neurocarpa in two co-occurring sites of the taxa. Seven haplotypes were identified from three taxonomic units, and their phylogenetic relationships were further constructed by means of maximum parsimony, maximum likelihood, and network analyses. These seven haplotypes clustered into two distinct, highly divergent lineages. Two haplotypes from one lineage were found in H. rhamnoides ssp. sinensis, and five (representing the other lineage) in H. neurocarpa ssp. neurocarpa. Hippophae goniocarpa shared four common haplotypes from both lineages, but the haplotypes detected from the two populations differed to some extent, and in each case were identical to local haplotypes of the putative parental species. Thus, both H. rhamnoides ssp. sinensis and H. neurocarpa ssp. neurocarpa appear to have together contributed to the maternal establishment of H. goniocarpa. These results clearly demonstrate that the marginal origin hypothesis should be rejected, and support the hybrid origin hypothesis. Hippophae goniocarpa exhibits a sympatric distribution with its two parent species, without occupying new niches or displaying complete ecological isolation. However, this species has effectively developed reproductive isolation from its sympatric parent species. Our preliminary results suggest that H. goniocarpa may provide a useful model system for studying diploid hybrid speciation in trees. (c) 2008 The Linnean Society of London.

高山松的二倍体杂种起源-来自三个基因组的证据

利用松科植物特殊的遗传体系（叶绿体基因组一父系遗传、线粒体基因组—母系遗传、核基因组一双亲遗传），我们对高山松及其两个亲本种进行了广泛的群体取样，通过线粒体基因nadl、叶绿体基因rbcL和trnL-F基因间区以及低拷贝核基因4CL的序列分析或PCR-RFLP分析，为高山松同倍体杂种起源假说提供了翔实的遗传学证据，同时在个体水平上探讨了高山松不同群体的遗传组成、群体遗传结构、基因交流方向、群体建立过程以及杂种基因组的进化。具体结果如下： 1．细胞质基因组分析 1)线粒体基因nudl分析 本研究对油松、高山松和云南松的19个群体、295个个体的线粒体基因nadl的一个内含子进行了序列分析或PCR-RFLP分析，共检测到3种线粒体DNA单倍型-A、B和C。油松所有的取样群体仅含单倍型A;除BX群体外，所有的云南松群体仅含单倍型B; 10个高山松群体中，5个群体固定单倍型A，4个群体固定单倍型B，1个群体(ZD)分布有A和B两种单倍型。2)叶绿体rbcL基因分析 对同一组群体的rbcL基因进行序列分析或PCR-RFLP分析，共检测到两个变异位点和三种叶绿体单倍型（TT、TC和GC）。TT和GC分别是油松和云南松种特异性叶绿体单倍型，而在高山松群体里则三种单倍型均有分布，而且TC单倍型广泛地分布在7个杂种群体中，该单倍型很可能来源于点突变或第三个已灭绝的亲本。rbcL基因检测到的高山松群体分化系数很高(Gst=0.533)。 3)叶绿体trn L-F区序列分析 叶绿体trnL-F分子标记检测到的不同单倍型的差异主要是由引物“e”下游120碱基处一个多聚T结构的长度变异所致（叶绿体SSR位点）。10个高山松群体中共检测到5种叶绿体单倍型，其中两种主要的单倍型(9T和11T)分别为油松和云南松的种特异性单倍型，其他单倍型均为非典型单倍型。群体遗传结构分析表明：杂种群体表现最高的遗传多样性，而且trnL-F分析得到的高山松群体的分化系数也很高( Gst=0.443)。 总之，对高山松、油松和云南松的同一组群体取样进行的细胞质基因组分析表明：高山松群体分布有油松和云南松种特异性的线粒体和叶绿体单倍型，该细胞质DNA单倍型的地理分布为假说“高山松为油松和云南松的的二倍体杂种”提供了翔实的遗传学证据。油松和云南松在不同的杂种群体中分别做父本和母本，即两亲本在杂交过程中发生了双向基因交流。群体遗传结构分析发现高山松群体表现最高的遗传多样性，而且群体间的分化系数很高。不同的杂种群体在遗传组成上的差异表明他们经历过不同的建立和进化历史。从线粒体和叶绿体单倍型的地理分布可以看出杂种群体的建立曾经历强烈的奠基者效应和回交。青藏高原的隆升对高山松的起源、杂种群体的适应辐射以及保持产生了重要的影响。川西南和滇西北作为青藏高原的东边边界，很可能是当初云南松和油松分布的重叠区及杂交地带，即高山松的起源地。 2．核基因4CL分析 对高山松、油松和云南松的19个群体、32个个体的低拷贝核基因4CL进行了克隆及序列分析，获得的78条序列可分为两种类型（类型A和类型B）。这两种类型明显的差别是类型A相对于类型B在内含子区有- 20bp的缺失。以华山松的3条序列为外类群，对得到的78条序列进行基因谱系分析，发现所有的序列分成明显的两支，分别对应于类型A和类型B，而且每一支均包含三个种的部分序列，表明4CL基因在这三个种分化之前就已发生重复。另一个明显的特点是某个种的一条序列与另一个种的序列比其与同种的其他序列关系更近，可能因基因交流（杂交和渐渗）、非共祖、致同进化和重组等进化事件所致。三种松树中共检测到4CL基因序列的两种类型和六个亚类型，高山松群体中没有发现杂种独特的类型或亚类型。高山松和云南松共享三种序列亚类型以及最多的序列多态性，表明这两个种之间曾存在广泛的基因交流。

高山松的群体历史及其适应性进化研究

物种形成一直以来是进化生物学的一个中心议题。因为杂交能够快速创造出新的遗传变异和提高基因组重组率，加速物种形成和适应性进化，所以杂交物种形成是其重要的组成部分。但是直到最近几年，人们才逐渐意识到同倍体杂种形成的重要性和普遍性。此外，人工杂交种群结果证实了杂种的适应性起源于亲本基因的超亲分离现象，这些基因之间通过加和效应或上位效应相互连锁，并在杂种后代中逐渐固定，因此，探讨维持这种适应机制的杂种的连锁不平衡模式就显得尤为重要。到目前为止，关于自然杂种的核苷酸多态性和连锁不平衡结构的报道非常稀见，对杂种的进化历史知之更少。高山松能生长于亲本种不能正常繁殖生长的青藏高原上，这种极端环境为杂种的适应性进化和与亲本的生态隔离造就了绝佳的条件，其生态和生殖的稳定性极大地方便了我们研究植物物种形成和适应性进化的遗传机理，对高山松开展的生态学、遗传学的系列分析已使高山松成为同倍体杂种形成的经典范例。 该论文通过随机挑选7个核基因位点对5个高山松群体、3个油松群体和3个云南松群体的164个大配子体单倍体基因组进行了核苷酸多态性分析。研究发现：所有基因座位的单倍型组成和基因谱系的拓扑结构都支持高山松的多次杂交起源。高山松的平均核苷酸多态性与油松相当，θW达到0.0107;比云南松高出一倍;高于已报道的裸子植物类群遗传变异水平。高山松如此高的遗传多态性与其杂交特性和有效群体大有关。我们运用分子钟和共祖模拟分析，推测出高山松的有效群体为7.32 x 105。等位基因共祖时间模拟分析发现，杂交过程早于青藏高原的隆升，也即是说，在杂种稳定成种以前，两个亲本种之间存在广泛的渐渗杂交。此外，高山松杂种的群体间分化严重，并且在不同的群体中，我们找到了多个偏离中性的基因座位。由此说明，高山松复杂的进化历史和适应的策略区域化。 在显著偏离中性的基因座位上，选取群体历史清晰的高山松群体，对其全基因序列多态性和连锁不平衡结构进行了深入调查，以期找到选择作用位点或区域。Ara-like和Dhn1两个基因在高山松与亲本之间都没有发现固定变异。在高山松中，Ara-like基因和Dhn1基因核苷酸多态性式样和连锁不平衡结构存在明显差异，这说明在两个基因上选择作用的程度和方向不尽相同。 我们对Dhn1基因的多态性分布、LD结构和中性偏离水平进行了分析，结果表明，该基因可能在PdNX和PdLZ群体中受到平衡选择的作用。从Dhn1基因谱系结构可以看出有两种来源的等位基因造成这种平衡多态性，一种属于祖先类型，另一种是从云南松继承衍生而来。这两种等位基因之间的分化很大，极有可能造成编码蛋白的亚功能化。事实上，Dhn1编码的脱水蛋白在植物对环境的抗逆过程中发挥着重要作用。由此我们推测高山松在高海拔极端环境中的适应性进化与Dhn1基因的平衡作用有关。 对Ara-like和Dhn1基因进行HKA检测，结果表明，与Dhn1基因相比，在Ara-like基因上，双维管束亚属与单维管束亚属之间存在显著分化，沉默突变位点的分化Ksil达到了0.1392，远远高于平均水平0.0508;在双维管束亚属共发现了43个固定突变位点，其中有6个能导致氨基酸突变，它们有可能导致了Ara-like基因功能的分化。结合裸子植物近缘物种间共享多态性的普遍性，我们推测Ara-like基因可能在单维管束亚属中的进化速率加快，暗示其在单维管束亚属中的适应性进化。 最后，基因内连锁不平衡分析结果显示，随机筛选的基因座位之间不存在连锁不平衡。高山松平均的基因内LD程度非常低，仅有18%的信息位点之间显著连锁。平均基因内LD在油松和高山松中的衰减速率很快，尤其在杂种中下降最快，在不到200bp以内就降到0.1以下。 LD的结果印证了高山松的有效群体大和多次起源特性。另外，我们也怀疑杂交物种形成过程中染色体组的重组和重排频繁发生，也是造成自然杂种现有群体的LD水平低的一个主要原因。 通过LD衰减曲线估计高山松的平均单位重组率,比亲本油松高17倍，比云南松高45倍。这个结果表明，杂种共适应的基因间要维持超亲分离，需要强烈的自然选择压力，才能保持它们之间的连锁不平衡。

Two unisexual artificial polyploid clones constructed by genome addition of common carp (Cyprinus carp) and crucian carp (Carassius auratus)

A polyploid hybrid fish with natural gynogenesis can prevent segregation and maintain their hybrid vigor in their progenies. Supposing the reproduction mode of induced polyploid fish being natural gynogenesis, allopolyploid hybrid between common carp and crucian carp into allopolyploid was performed. The purpose of this paper is to describe a lineage from sexual diploid carp transforming into allotriploid and allotetraploid unisexual clones by genome addition. The diploid hybrid between common carp and crucian carp reproduces an unreduced nucleus consisting of two parental genomes. This unreduced female pronucleus will fuse with male pronucleus and form allotriploid zygote after penetration of related species sperms. Allotriploid embryos grow normally, and part of female allotriploid can produce unreduced mature ova with three genomes. Mature ova of most allotriploid females are provided with natural gynogenetic trait and their nuclei do not fuse with any entrance sperm. All female offspring are produced by gynogenesis of allotriploid egg under activation of penetrating sperms. These offspring maintain morphological traits of their allotriploid maternal and form an allotetraploid unisexual clone by gynogenetic reproduction mode. However, female nuclei of rare allotriploid female can fuse with penetrating male pronuclei and result in the appearance of allotetraploid individuals by means of genome addition. All allotetraploid females can reproduce unreduced mature eggs containing four genomes. Therefore, mature eggs of allotetraploid maintain gynogenetic trait and allotetraploid unisexual clone is produced under activation of related species sperms.

Stiffness behaviour of injection moulded short glass fibre/impact modifier/polypropylene hybrid composites

The stiffness behaviour of injection moulded short glass fibre/impact modifier/polypropylene hybrid composites has been investigated in this work by theoretical predictions and experiments. Predictions from the self-consistent method were found to be in good agreement with test results for the impact modifier/polypropylene blends. By taking into account of the fibre orientation distributions in the skin and core layers, the values of Young's modulus for the skin and core layers were predicted by employing Eshelby's equivalent inclusion method and the average induced strain approach. The prediction of the values of Young's modulus for the whole sample was obtained by applying the simple mixture theory of laminated composites to the predicted results for the skin and core layers. Good correlation between predicted and experimental Young's modulus values were found.

Biological application of multi-component nanowires in hybrid devices powered by F-1-ATPase motors

In this paper, construction of hybrid device by integrating nanowires with F1-ATPase motors is described. The nickel nanowires and multi-segment nanowires, including gold and nickel, were fabricated by electrochemical deposition in nanoporous templates. The nickel nanowires functionalized by biotinylated peptide can be assembled directly onto F1-ATPase motors to act as the propellers. If the multicomponent nanowires, including gold and nickel, were selectively functionalized by the thiol group modified ssDNA and the synthetic peptide, respectively, the biotinylated F1- ATPase motors can be attached to the biotinylated peptide on nickel segment of the nanowires. Then, the multi-component nanowires can also be used as the propellers, and one may observe the rotations of the multi-component nanowires driven by F1-ATPase motors. Therefore, introduction of multiple segments along the length of a nanowire can lead to a variety of multiple chemical functionalities, which can be selectively bound to cells and special biomolecules. This method provides an insight for the construction of other hybrid devices with its controlling arrangement of different biomolecule on designed nanometer scale structures.

Elastic Waves in a Hybrid Multilayered Piezoelectric Plate

An analytical-numerical method is presented for analyzing dispersion and characteristic surface of waves in a hybrid multilayered piezoelectric plate. In this method, the multilayered piezoelectric plate is divided into a number of layered elements with three-nodal-lines in the wall thickness, the coupling between the elastic field and the electric field is considered in each element. The associated frequency dispersion equation is developed and the phase velocity and slowness, as well as the group velocity and slowness are established in terms of the Rayleigh quotient. Six characteristic wave surfaces are introduced to visualize the effects of anisotropy and piezoelectricity on wave propagation. Examples provide a full understanding for the complex phenomena of elastic waves in hybrid multilayered piezoelectric media.

Impact response and failure mechanisms of ultrahigh modulus polyethylene fiber composites and polyethylene fiber-carbon fiber hybrid composites

The impact response and failure mechanisms of ultrahigh modulus polyethylene (UHMPE) fiber composites and UHMPE fiber-carbon fiber hybrid composites have been investigated. Charpy impact, drop weight impact and high strain rate impact experiments have been performed in order to study the impact resistance, notch sensitivity, strain rate sensitivity and hybrid effects. Results obtained from dynamic and quasi-static measurements have been compared. Because of the ductility of UHMPE fibers, the impact energy absorption of UHMPE fiber composites is very high, thereby leading to excellent damage tolerance. By hybridizing with UHMPE fibers, the impact properties of carbon fiber composites can be greatly improved. The impact and shock failure mechanisms of these composites are discussed.

Thermal Strain Analysis of a Flip-Chip Package by a Modified Hybrid Method

介绍一种可用于微电子封装局部应变场分析的实验/计算混合方法,该方法结合了有限元的整体/局部模型和实时的激光云纹干涉技术,利用激光云纹干涉技术所测得的应变场来校核有限元整体模型的计算结果,并用整体模型的结果作为局部模型的边界条件,对实验难以确定的封装结构局部位置的应力、应变场进行分析.用这种方法对可控坍塌倒装封装结构在热载荷作用下焊球内的应变场分布进行了分析,结果表明该方法能够提供封装结构内应力-应变场分布的准确和可靠的结果,为微电子封装的可靠性分析提供重要的依据. For the reliability analysis of electronic packages, strains in very localized areas, such as an interconnection or a corner, need to be determined. In this paper, a modified hybrid method of global/local modeling and real time moire interferometry is presented. In this method, a simplified, coarsely meshed global model is developed to get rough information about the deformation of the microelectronic package. In order to make sure the global model has been reasonably simplified and the material properties ...

Essential and Non-Essential Work of Fracture of PI/SiO2 Hybrid Thin Films

Essential work of fracture (EWF) analysis is used to study the effect of the silica doping level on fracture toughness of polyimide/silica (PI/SiO2) hybrid films. By using double-edge-notched-tension (DENT) specimens with different ligament lengths, it seems that the introduction of silica additive can improve the specific essential work of fracture (w (e) ) of PI thin films, but the specific non-essential work of fracture (beta w (p) ) will decease significantly as the silica doping level increasing from 1 to 5 wt.%, and even lower than that of neat PI. The failure process of the fracture is investigated with online scanning electron microscope (SEM) observation and the parameters of non-essential work of fracture, beta and w (p) , are calculated based on finite element (FE) method.

Hybrid Finite Compact-WENO Schemes for Shock Calculation

Hybrid finite compact (FC)-WENO schemes are proposed for shock calculations. The two sub-schemes (finite compact difference scheme and WENO scheme) are hybridized by means of the similar treatment as in ENO schemes. The hybrid schemes have the advantages of FC and WENO schemes. One is that they possess the merit of the finite compact difference scheme, which requires only bi-diagonal matrix inversion and can apply the known high-resolution flux to obtain high-performance numerical flux function; another is that they have the high-resolution property of WENO scheme for shock capturing. The numerical results show that FC-WENO schemes have better resolution properties than both FC-ENO schemes and WENO schemes. In addition, some comparisons of FC-ENO and artificial compression method (ACM) filter scheme of Yee et al. are also given.

A Constrained Particle Dynamics for Continuum-Particle Hybrid Method in Micro- and Nano-Fluidics

A hybrid method of continuum and particle dynamics is developed for micro- and nano-fluidics, where fluids are described by a molecular dynamics (MD) in one domain and by the Navier-Stokes (NS) equations in another domain. In order to ensure the continuity of momentum flux, the continuum and molecular dynamics in the overlap domain are coupled through a constrained particle dynamics. The constrained particle dynamics is constructed with a virtual damping force and a virtual added mass force. The sudden-start Couette flows with either non-slip or slip boundary condition are used to test the hybrid method. It is shown that the results obtained are quantitatively in agreement with the analytical solutions under the non-slip boundary conditions and the full MD simulations under the slip boundary conditions.

A dynamic coupling model for hybrid atomistic-continuum computations

A dynamic coupling model is developed for a hybrid atomistic-continuum computation in micro- and nano-fluidics. In the hybrid atomistic-continuum computation, a molecular dynamics (MD) simulation is utilized in one region where the continuum assumption breaks down and the Navier-Stokes (NS) equations are used in another region where the continuum assumption holds. In the overlapping part of these two regions, a constrained particle dynamics is needed to couple the MD simulation and the NS equations. The currently existing coupling models for the constrained particle dynamics have a coupling parameter, which has to be empirically determined. In the present work, a novel dynamic coupling model is introduced where the coupling parameter can be calculated as the computation progresses rather than inputing a priori. The dynamic coupling model is based on the momentum constraint and exhibits a correct relaxation rate. The results from the hybrid simulation on the Couette flow and the Stokes flow are in good agreement with the data from the full MD simulation and the solutions of the NS equations, respectively. (c) 2007 Elsevier Ltd. All rights reserved.