One-dimensional improvement and two-dimensional and 3-dimensional treatments for stable oscillation condition, mode structure and power output in high-speed-flow lasers

For high-speed-flow lasers, the one-dimensional and first-order approximate treatment in[1] under approximation of geometrical optics is improved still within the scope of approx-imation of geometrical optics. The strict accurate results are obtained, and what is more,two- and three-dimensional treatments are done. Thus for two- and three-dimensional cases, thestable oscillation condition, the formulae of power output and analytical expression of modesunder approximation of geometrical optics (in terms of gain function) are derived. Accord-ing to the present theory, one-and two-dimensional calculations for the typical case of Gerry'sexperiment are presented. All the results coincide well with the experiment and are better thanthe results obtained in [1].In addition, the applicable scope of Lee's stable oscillation condition given by [1] is ex-panded; the condition for the approximation of gcometrical optics to be applied to mode con-structure in optical cavity is obtained for the first time and the difference between thiscondition and that for free space is also pointed out in the present work.

Singularity criteria for perturbation series

This paper is concerned with some mathematical aspects of the Van Dyke method inperturbation theory, i.e. the singularity criteria of perturbation series. The author suggestsa sign criterion and a Domb-syke plot for the cases with complex conjugate singularities, thussucceeding in extending the conclusions of Van Dyke's. Subsequently. effects of singularitiesof the lower order upon the criteria are taken into account. In addition, a method of locat-ing singular points is developed by analysing the new perturbation series derived by the Eulertransformation.

On the non-linear stability theory of spinning solid bodies with liquid-filled cavities and its application to the columbus problem

In this paper, we first present a system of differential-integral equations for the largedisturbance to the general case that any arbitrarily shaped solid body with a cavity contain-ing viscous liquid rotates uniformly around the principal axis of inertia, and then develop aweakly non-linear stability theory by the Lyapunov direct approach. Applying this theoryto the Columbus problem, we have proved the consistency between the theory and Kelvin'sexperiments.

Mechanisms underlying two kinds of surface effects on elastic constants

ABSTRACT Recently, people are confused with two opposite variations of elastic modulus with decreasing size of nano scale sample: elastic modulus either decreases or increases with decreas- ing sample size. In this paper, based on intermolecular potentials and a one dimensional model, we provide a unified understanding of the two opposite size effects. Firstly, we analyzed the mi- crostructural variation near the surface of an fcc nanofilm based on the Lennard-Jones potential. It is found that the atomic lattice near the surface becomes looser in comparison with the bulk, indicating that atoms in the bulk are located at the balance of repulsive forces, resulting in the decrease of the elastic moduli with the decreasing thickness of the film accordingly. In addition, the decrease in moduli should be attributed to both the looser surface layer and smaller coor- dination number of surface atoms. Furthermore, it is found that both looser and tighter lattice near the surface can appear for a general pair potential and the governing mechanism should be attributed to the surplus of the nearest force to all other long range interactions in the pair po- tential. Surprisingly, the surplus can be simply expressed by a sum of the long range interactions and the sum being positive or negative determines the looser or tighter lattice near surface re- spectively. To justify this concept, we examined ZnO in terms of Buckingham potential with long range Coulomb interactions. It is found that compared to its bulk lattice, the ZnO lattice near the surface becomes tighter, indicating the atoms in the bulk located at the balance of attractive forces, owing to the long range Coulomb interaction. Correspondingly, the elastic modulus of one- dimensional ZnO chain increases with decreasing size. Finally, a kind of many-body potential for Cu was examined. In this case, the surface layer becomes tighter than the bulk and the modulus increases with deceasing size, owing to the long range repulsive pair interaction, as well as the cohesive many-body interaction caused by the electron redistribution.

On the Bearing Capacity of Suction Bucket Foundations in Saturated Sand

Abstract: The static bearing capacity of suction caisson with single-and four-caissons in saturated sand foundation is studied by experiments. The characteristics of bearing capacity under vertical and horizontal loadings are obtained ex- perimentally. The effects of loading direction on the bearing capacity of four-caissons are studied under horizontal load- ing. The comparison of the bearing capacity of single-caisson and four-caisson foundation, the sealed condition of cais- son’s top and loading rate are analyzed.

透红外大尺寸氧氟化物玻璃研究

锗酸盐和氟铝酸盐透红外玻璃材料作为窗口或头罩材料具有广泛的应用前景。结合锗酸盐玻璃含有少量水的问题，在成分中引入氟化物，实验表明：随氟化物含量增加．玻璃中羟基含量逐渐降低。同时通过对熔制温度的调整，获得了不合羟基的红外玻璃。针对氟铝酸盐玻璃在冷却过程中易析晶的问题，在氟化物组分中加入少量重金属氧化物TeO2，得到析晶性能好的氧氟铝酸盐玻璃。同时给出了两类红外材料的一些物理、化学性质。

黑长臂猿的分布、现状与保护

黑长臂猿(H y lobates concolor) 是现生11 种长臂猿中其系统地位最低的灵长类。历史时期 长臂猿曾广泛分布在我国南部的大部省区。自公元4 世纪以来, 它们的分布发生了很大变化。分 布区从北到南, 从东到西急剧缩小, 现黑长臂猿缩小到只在海南岛、云南南部和越南北部, 已 分化为6 个亚种。分布于我国的5 亚种中, 海南亚种(H. c. hainanus) 现今仅20 余只, 是最 濒危的一个亚种; . 北部湾亚种(H. c. nasu tus) 50 年代曾在广西西南部发现, 60- 70 年代已绝 迹; 指名亚种(H. c. concolor) 主要分布于越南北部、滇南和滇中哀牢山。滇南约有100 余只, 滇中哀牢山可能有40- 60 群, 180- 240 只; 景东亚种(H. c. j ing d ong ensis) 为滇中无量山的 特有亚种, 现有100- 116 群, 430- 500 只; 滇西亚种(H. c. f u rvog aster) , 只分布在滇西南的 沧源、镇康、云县和耿马等地, 约有26- 42 群, 100- 150 只。现今, 黑长臂猿的分布区已不足 1 000Km 2, 总数量约1 000 只, 为高度濒危的灵长类动物。造成黑长臂猿濒危的主要原因是: 热 带和南亚热带原始森林的被破坏和缩小、人类活动的干扰使生境破碎和恶化、过度猎捕和长臂 猿自身的生物学弱点。目前, 中国的黑长臂猿已在9 个自然保护区中得到保护。

蓝氏贾第虫分离株tim 基因序列分析比较研究

　为了探讨来源于不同地理位置贾第虫分离株之间的遗传学关系, 采用tim 基因扩增、限制性酶切和 DNA 序列分析方法对来自我国(C1、C2、、CH2、CH3)、柬埔寨(CAM )、澳大利亚(A 1、A 2) 和美国(BP、CDC) 共9 株 蓝氏贾第虫的基因型进行了分析比较。结果表明,A 1、A 2 和CAM 属第1 型(WB) ; CH2 和CH3 属第2 型(JH) ; C1、 C2、BP 和CDC 属第3 型(GS)。本实验结果提示, 虫株间遗传学关系并非由地理位置的远近所决定。来源于同一地 理位置的虫株其遗传学特性可有很大的差异。相反, 来源于地理位置相隔很远的虫株其遗传学特性却可极为相近。 贾第虫分离株基因型的确定可为本虫分子系统进化和分子流行病学研究提供重要资料。

鸡胚背根神经节培养法测定神经生长因子(NGF) 活性的条件优化

目的　探索一套稳定可靠的鸡胚背根神经节测定N GF 活性的实验条件。　方法　通过观察培养 基、鸡血浆和鸡胚浸液的比例、背根神经节部位、培养时间等条件对N GF 刺激神经节生长的影响, 从而 建立一套该培养法检测N GF 活性的优化条件。　结果　以DM EM 为母液, 在含20% 鸡血浆和15% 鸡胚 浸液的培养基中, 利用伊莎褐鸡胚腰椎背根神经节, 在终浓度为30 ngöm l 的蛇毒N GF 的刺激下, 培养36h 可以得到较好的实验结果。　结论　该条件简单实用、分辨率高、重复性好。

从美国国会通过的一项法令看生物毒性试验的发展

<正> 1988年9月22日美国参议院接受一项提案并在国会通过了一项《消费者产品安全试验法令》(Consumer Products Safe Test-ing Act,以下简称“法令”)。法令中指出在脊椎动物上进行的急剧毒性试验——LD_(50) (半致死荆量) 试验是不正确的、错误的和不需要的,为此联邦政府采取禁止使用LD_(50)试验的行动。在医学、卫生、环保部门进行的急性毒性试验提供对含毒产品,工业废弃物相对致死的信息,是在限定时间内受试生物死亡一半的剂量 (或浓度) ,称为半致死剂量LD_(50)

Optimum temperature for the growth performance of juvenile orange-spotted grouper (Epinephelus coioides H.)

Effects of water temperature (17, 21, 25, 30 and 35 degrees C) and body size (14.75-281.41 g initial body weight) on food consumption, growth, feed conversion, and dry matter content in orange-spotted grouper fed to satiation were investigated. The combined effect of temperature (T, degrees C) and body weight (W, g) on maximum food consumption (C-max, g/day) was described as: InCmax= -7.411+0.828 lnW+0.317T-0.004 7T(2), and the optimum feeding temperature was 33.9 degrees C. The combined effect of temperature and body weight on growth (G) was described as: InG= -4.461-0.208lnW+0.394T-0.006 3T(2). The optimum growth temperature was 31.4 degrees C, whereas overall growth rates were high at 25, 30 and 35 degrees C. Feed conversion efficiencies (FCE, %), increasing first and then decreasing with increasing temperature, averaged from 1.8 to 2.1 in terms of dry weight of food fish. The optimum temperature for FCE tended to be lower than that for growth or feeding. Dry matter content increased with both increasing water temperature (17, 25, 30 and 35 degrees C) and body weight, and the combined effect of temperature and body weight on dry matter content (DM, %) was described as: lnDM =3.232+0.01 4 lnW-0.004 4T+0.001 2TlnW.

PCR survey of Hox genes in the goldfish Carassius auratus auratus

A tetraploidization event took place in the cyprinid lineage leading to goldfishes about 15 million years ago. A PCR survey for Hox genes in the goldfish Carassius auratus auratus (Actinopterygii: Cyprinidae) was performed to assess the consequences of this genome duplication. Not surprisingly, the genomic organization of the Hox gene clusters of goldfish is similar to that of the closely related zebrafish (Danio rerio). However, the goldfish exhibits a much larger number of recent pseudogenes, which are characterized by indels. These findings are consistent with the hypothesis that dosage effects cause selection pressure to rapidly silence crucial developmental regulators after a tetraploidization event.

Independent adaptation to riverine habitats allowed survival of ancient cetacean lineages

The four species of "river dolphins" are associated with six separate great river systems on three subcontinents and have been grouped for more than a century into a single taxon based on their similar appearance. However, several morphologists recently questioned the monophyly of that group. By using phylogenetic analyses of nucleotide sequences from three mitochondrial and two nuclear genes, we demonstrate with statistical significance that extant river dolphins are not monophyletic and suggest that they are relict species whose adaptation to riverine habitats incidentally insured their survival against major environmental changes in the marine ecosystem or the emergence of Delphinidae.

自然交互研究——笔式简谱编辑器的设计与实现

自然交互是指用户可以用自己熟悉的日常技能与计算机进行交互。中国有大量的音乐爱好者使用简谱,但是针对简谱编辑的编辑软件却相对较少,并且现有软件的交互方式不够自然,降低了用户对软件的使用效率。他们需要一种更自然、更方便使用的简谱编辑软件。该文介绍了一个基于笔式输入的简谱编辑器原型系统的设计和实现。基于对现有软件、简谱特性和可利用的新技术的综合分析,设计并实现了这个原型系统。对此原型系统进行了非正式的用户实验之后,对结果进行了分析,并提出了修改的方案。

construction of feature-matching perception in virtual assembly

An important characteristic of virtual assembly is interaction. Traditional di-rect manipulation in virtual assembly relies on dynamic collision detection, which is very time-consuming and even impossible in desktop virtual assembly environment. Feature-matching isa critical process in harmonious virtual assembly, and is the premise of assembly constraint sens-ing. This paper puts forward an active object-based feature-matching perception mechanism and afeature-matching interactive computing process, both of which make the direct manipulation in vir-tual assembly break away from collision detection. They also help to enhance virtual environmentunderstandability of user intention and promote interaction performance. Experimental resultsshow that this perception mechanism can ensure that users achieve real-time direct manipulationin desktop virtual environment.