Laser ranging based on electro-optic switch

Based on electro-optic switch effect in crystal, a novel laser ranging method is proposed. CW-laser emitted by laser transmitter propagates forward to the measured target, after being reflected by the target, and then goes back to the transmitter. Close to the transmitter, a special mono-block LiNbO3 crystal is added into the round-trip light beams. High-voltage pulses with the sharp enough changes in rising edges are loaded on the crystal. Based on electro-optic effect, double refraction and internal double reflection effect in crystal, the crystal cuts off the round-trip light beams, and reflects a light pulse cut out by the crystal to a detector aside from the original beam path. The pulse width T is the period that laser propagates forward and back between the crystal and the target. The feasibility of the new idea is proved by our experiments and a brand-new way for the laser ranging is provided. (c) 2005 Elsevier GmbH. All rights reserved.

The role of cell-surface-bound phosphatases in species competition within natural phytoplankton assemblage: an in situ experiment

Despite it is widely acknowledged that the ability to hydrolyze dissolved organic matter using extracellular phosphatases is diverse in fresh water phytoplankton, the competition within single species related to presence and quantity of cell-surface-bound phosphatases has not been examined in natural conditions yet. Here, we studied phytoplankton species competition in a freshwater reservoir during an in situ experiment. A natural plankton community, with the exclusion of large zooplankton, was enclosed in permeable dialysis bags inside two large containers of different bioavailable phosphate concentrations. Phytoplankton species biomass and the abundance of bacteria were determined in purpose to compare the development of enclosed microbial communities. Total and cell-surface-bound phosphatase activities in the phytoplankton were investigated using the Fluorescently Labelled Enzyme Activity (FLEA) technique that allows for direct microscopic detection of phosphatase-positive cells and, with image cytometry, enables quantification of phosphatase hydrolytic capacity. Production of extracellular phosphatases was not completely inhibited or stopped in the phosphate-enriched environment, phytoplankton cells only showed the activity less often. Under the phosphate-nonenriched conditions, the production of phosphatases was enhanced, but active species did not proliferate amongst phytoplankton assemblage. Further, specific growth rates of the phosphatase-positive species in the non-enriched environment were lower than the same phosphatase-positive species in phosphate-enriched environment. Interestingly, the phosphatase-positive cells of Ankyra ancora increased their size in both treatments equally, although the population in phosphate-enriched environment grew much faster and the cell-specific phosphatase activity was lower. We hypothesize that brand new daughter cells had sufficient phosphorus reserves and therefore did not employ extracellular phosphatases until they matured and needed extra bioavailable phosphorus to support their metabolism before cell division. Based on presented in situ experiment, we propose that the ability to hydrolyze organic polymers and particles with cell-surface-hound phosphatases is advantageous for longer persistence of given population in a phosphate-scarce environment; although phosphatase-positive species cannot dominate the reservoir phytoplankton solely because of specific phosphorus-scavenging strategy.

Tellurium enhanced non-resonant third-order optical nonlinearity in a germano-silicate optical fiber

碲掺杂的高非线性石英光纤

All-optical switching application of germano-silicate optical fiber incorporated with Ag nanocrystals

银纳米晶体掺杂的高非线性石英光纤的全光转换应用

Intense green upconversion emission in Tb3+/Yb3+ co-doped alumino-germano-silicate optical fibers

Tb/Yb共掺的石英光纤的上转换绿光发光研究，研究了最佳浓度配比和发光机理。

Ocean urea fertilization for carbon credits poses high ecological risks

The proposed plan for enrichment of the Sulu Sea, Philippines, a region of rich marine biodiversity, with thousands of tonnes of urea in order to stimulate algal blooms and sequester carbon is flawed for multiple reasons. Urea is preferentially used as a nitrogen source by some cyanobacteria and dinoflagellates, many of which are neutrally or positively buoyant. Biological pumps to the deep sea are classically leaky, and the inefficient burial of new biomass makes the estimation of a net loss of carbon from the atmosphere questionable at best. The potential for growth of toxic dinoflagellates is also high, as many grow well on urea and some even increase their toxicity when grown on urea. Many toxic dinoflagellates form cysts which can settle to the sediment and germinate in subsequent years, forming new blooms even without further fertilization. If large-scale blooms do occur, it is likely that they will contribute to hypoxia in the bottom waters upon decomposition. Lastly, urea production requires fossil fuel usage, further limiting the potential for net carbon sequestration. The environmental and economic impacts are potentially great and need to be rigorously assessed. (C) 2008 Elsevier Ltd. All rights reserved.

基于循环抑制CPG模型控制的蛇形机器人三维运动

具有三维运动能力和独特的节律运动方式,使生物蛇能在复杂的地形环境中生存.大多数动物节律运动是由中央模式发生器(Centralpatterngenerator,CPG)控制的.以此为理论依据,首次以循环抑制建模机理构建蛇形机器人组合关节运动控制的CPG模型.证明该模型是节律输出型CPG中微分方程维数最少的.采用单向激励方式连接该类CPG构建蛇形机器人三维运动神经网络控制体系,给出该CPG网络产生振荡输出的必要条件.应用蛇形机器人动力学模型仿真得到控制三维运动的CPG神经网络参数,利用该CPG网络的输出使“勘查者”成功实现三维运动.该结果为建立未探明的生物蛇神经网络模型提供了一种全新的方法.

地震反射系数成像方法研究

Reflectivity sequences extraction is a key part of impedance inversion in seismic exploration. Although many valid inversion methods exist, with crosswell seismic data, the frequency brand of seismic data can not be broadened to satisfy the practical need. It is an urgent problem to be solved. Pre-stack depth migration which developed in these years becomes more and more robust in the exploration. It is a powerful technology of imaging to the geological object with complex structure and its final result is reflectivity imaging. Based on the reflectivity imaging of crosswell seismic data and wave equation, this paper completed such works as follows: Completes the workflow of blind deconvolution, Cauchy criteria is used to regulate the inversion(sparse inversion). Also the precondition conjugate gradient(PCG) based on Krylov subspace is combined with to decrease the computation, improves the speed, and the transition matrix is not necessary anymore be positive and symmetric. This method is used to the high frequency recovery of crosswell seismic section and the result is satisfactory. Application of rotation transform and viterbi algorithm in the preprocess of equation prestack depth migration. In equation prestack depth migration, the grid of seismic dataset is required to be regular. Due to the influence of complex terrain and fold, the acquisition geometry sometimes becomes irregular. At the same time, to avoid the aliasing produced by the sparse sample along the on-line, interpolation should be done between tracks. In this paper, I use the rotation transform to make on-line run parallel with the coordinate, and also use the viterbi algorithm to complete the automatic picking of events, the result is satisfactory. 1. Imaging is a key part of pre-stack depth migration besides extrapolation. Imaging condition can influence the final result of reflectivity sequences imaging greatly however accurate the extrapolation operator is. The author does migration of Marmousi under different imaging conditions. And analyzes these methods according to the results. The results of computation show that imaging condition which stabilize source wave field and the least-squares estimation imaging condition in this paper are better than the conventional correlation imaging condition. The traditional pattern of "distributed computing and mass decision" is wisely adopted in the field of seismic data processing and becoming an obstacle of the promoting of the enterprise management level. Thus at the end of this paper, a systemic solution scheme, which employs the mode of "distributed computing - centralized storage - instant release", is brought forward, based on the combination of C/S and B/S release models. The architecture of the solution, the corresponding web technology and the client software are introduced. The application shows that the validity of this scheme.

井间地震技术研究和应用

Cross well seismic technique is a new type of geophysical method, which observes the seismic wave of the geologic body by placing both the source and receiver in the wells. By applying this method, it averted the absorption to high-frequency component of seismic signal caused by low weathering layers, thus, an extremely high-resolution seismic signal can be acquired. And extremely fine image of cross well formations, structure, and reservoir can be achieved as well. An integrated research is conducted to the high-frequency S-wave and P-wave data and some other data to determine the small faults, small structure and resolving the issues concerning the thin bed and reservoir's connectivity, fluid distribution, steam injection and fracture. This method connects the high-resolution surface seismic, logging and reservoir engineering. In this paper, based on the E & P situation in the oilfield and the theory of geophysical exploration, a research is conducted on cross well seismic technology in general and its important issues in cross well seismic technology in particular. A technological series of integrated field acquisition, data processing and interpretation and its integrated application research were developed and this new method can be applied to oilfield development and optimizing oilfield development scheme. The contents and results in this paper are as listed follows: An overview was given on the status quo and development of the cross well seismic method and problems concerning the cross well seismic technology and the difference in cross well seismic technology between China and international levels; And an analysis and comparison are given on foreign-made field data acquisition systems for cross-well seismic and pointed out the pros and cons of the field systems manufactured by these two foreign companies and this is highly valuable to import foreign-made cross well seismic field acquisition system for China. After analyses were conducted to the geometry design and field data for the cross well seismic method, a common wave field time-depth curve equation was derived and three types of pipe waves were discovered for the first time. Then, a research was conducted on the mechanism for its generation. Based on the wave field separation theory for cross well seismic method, we believe that different type of wave fields in different gather domain has different attributes characteristics, multiple methods (for instance, F-K filtering and median filtering) were applied in eliminating and suppressing the cross well disturbances and successfully separated the upgoing and downgoing waves and a satisfactory result has been achieved. In the area of wave field numerical simulation for cross well seismic method, a analysis was conducted on conventional ray tracing method and its shortcomings and proposed a minimum travel time ray tracing method based on Feraiat theory in this paper. This method is not only has high-speed calculation, but also with no rays enter into "dead end" or "blinded spot" after numerous iterations and it is become more adequate for complex velocity model. This is first time that the travel time interpolation has been brought into consideration, a dynamic ray tracing method with shortest possible path has been developed for the first arrivals of any complex mediums, such as transmission, diffraction and refraction, etc and eliminated the limitation for only traveling from one node to another node and increases the calculation accuracy for minimum travel time and ray tracing path and derives solution and corresponding edge conditions to the fourth-order differential sonic wave equation. The final step is to calculate cross well seismic synthetics for given source and receivers from multiple geological bodies. Thus, real cross-well seismic wave field can be recognized through scientific means and provides important foundation to guide the cross well seismic field geometry designing. A velocity tomographic inversion of the least square conjugated gradient method was developed for cross well seismic velocity tomopgraphic inversion and a modification has been made to object function of the old high frequency ray tracing method and put forward a thin bed oriented model for finite frequency velocity tomographic inversion method. As the theory model and results demonstrates that the method is simple and effective and is very important in seismic ray tomographic imaging for the complex geological body. Based on the characteristics of the cross well seismic algorithm, a processing flow for cross well seismic data processing has been built and optimized and applied to the production, a good section of velocity tomopgrphic inversion and cross well reflection imaging has been acquired. The cross well seismic data is acquired from the depth domain and how to interprets the depth domain data and retrieve the attributes is a brand new subject. After research was conducted on synthetics and trace integration from depth domain for the cross well seismic data interpretation, first of all, a research was conducted on logging constraint wave impedance of cross well seismic data and initially set up cross well seismic data interpretation flows. After it applied and interpreted to the cross well seismic data and a good geological results has been achieved in velocity tomographic inversion and reflection depth imaging and a lot of difficult problems for oilfield development has been resolved. This powerful, new method is good for oilfield development scheme optimization and increasing EOR. Based on conventional reservoir geological model building from logging data, a new method is also discussed on constraining the accuracy of reservoir geological model by applying the high resolution cross well seismic data and it has applied to Fan 124 project and a good results has been achieved which it presents a bight future for the cross well seismic technology.

当代大学生消费价值观与消费行为的调查研究——北京大学生中的消费主义倾向及有关影响因素研究

The aim of this study was to investigate consuming values and behaviors in Chinese college students, to detect the factorial structure in consuming values, and to explore possible determinants of those values and their effects on consuming behaviors. A total of 778 students from various universities in Beijing were investigated with questionnaire survey. The main results and conclusions are as follows: (1) College students were basically satisfied with their current life and study conditions in university, and their main pressures or stresses were from their studies. They were highly motivated in the development of their academic and life careers, and also valued the importance of family and having children in the future. About 11% of the students had pressures due to less favorable financial conditions of their families. (2) Five basic consuming values were found among college students, namely, “industrious and thrifty-aimed value”, “status and brand-aimed value”, “personal and unique-oriented value”, “relation-aimed value”, and “autonomous-aimed value”. The “industrious and thrifty-aimed value” stands for the traditional consuming values in the culture, and the “status and brand-aimed value” shows an explicit tendency of consumerism. The other three consuming values had moderate relations with both of the two values. (3) There was a high negative correlation between the first two values, which showed both a general acceptance and the main trend of “industrious and thrifty-aimed value” among the students. The basic “status and brand-aimed value” was shown among 3.3% of the students. (4) The consuming values were significantly correlated with life values, indicating that consuming values could be in consistence with or be determined by basic life values. The “industrious and thrifty-aimed value” and the “autonomous-aimed value” were shown as collectivistic values, while the “status and brand-aimed value” and “relation-aimed value” were shown as individualistic values. (5) Consuming values had significant influences on consuming behaviors. (6) The demographic factors such as financial conditions of parents, children of number in family, urban-rural location of family, gender, age, and campus culture could affect consuming values and consuming behaviors of college students in both direct and indirect ways.

品牌表现评价反应时与关注特性的关系

The decision making of customers has been a great concern in the field of customer research. Although China has entered the era of brand consumption and development, due to the different understanding of the regarded attributes between companies and customers, the phenomenon of “The awarded products don’t sell well, but the products which sell well can’t get the award.” appears. At the same time there is little research on the relationship between the brand and the customers has been conducted in China now. Traditional research on customer psychology employ questionnaires, depth interview and group discussions as the major methods. In cognitive psychology, the limitation of explicit memory has been revealed by implicit memory; moreover, unconscious cognition and implicit memory can also influence customers' remark of the brand. Therefore, the traditional methods are not accurate enough. Reaction time is an effective way to reveal testing equality, and it can also reveal implicit cognition. Based on the researches intends to investigate the validity of attention attributes in the method of reaction time by questionnaires and time reaction testing of 360 customers in 3 cities, which may, probably, overcomes the limitation of the traditional research methods. The 352 valid samples were analyzed by SPSS. The results showed there was no distinct corresponding relationship between the product attributes and reaction time. The different key attributes from questionnaire importance rating and the shortest reaction time standards were used to regressively analyze the results of customers’ overall rating (such as overall satisfaction,objective quality, recommend intention).The results indicated that the coefficiency of regression of the special attributes chosen from reaction time to overall rating was distinct, while the coefficiency of the special attributes chosen from importance rating to overall rating was not. The main conclusions are: 1. Regarded attributes can be obtained by the reaction time of brand performance rating. 2. Regarded attributes obtained by the reaction time of brand performance rating are more accurate than those by importance rating questionnaires. 3. The brand’s core attributes should includes regarded attributes during the decision making process.

不同类型量表的线上调查和传统纸笔调查的比较研究

During the past 11 years, with the rapid development of the Internet, more and more psychologists began to realize and take advantage of it, which led to a growing number of psychological test administrated on the internet for data collection. But there were some controversy about the reliability and representatively of this new method. To examine the applicability of the Online Survey and how different types of scales used on the internet, we first reversed the measurement instrument, then from three different levels to investigate the equivalence of online survey and paper-and-pencil assessment, namely, sample level, scale level and item level. Both Classical Test Theory and Item Response Theory were used to analyze the invariance of different types of scale applicability on the internet. The main conclusions of this study could be drawn as follows: 1. In the sample-based study, self-select sample of the online survey was compared to the random sampled sample of paper-and-pencil assessment. The results showed there were no gender difference between them (p>0.05), but the online survey sample was characterized with high qualifications, high-income and younger features (88% of the sample with post-secondary education or above, and 71% aged 20 -29 years). There were significant differences on the scores of all scales between online survey and paper-and-pencil assessment (p<0.01). With demographic controlled, there was no significant difference on the variable of Neurotic between different surveys (p>0.05). 2. With in-group design, it was proved equivalence of the scale of BI (Attitude toward Brand Importance), BT (Attitude toword Brand Switcher), Extraversion, and Conscientiousbess in the compared study in the reliability, construct validity and average scores. 3. On the item level, the results based on the Item Response Theory analysis showed that 2PLM is appropriate for personality and attitude scales. With regard to personality scale, there emerged some items with DIF in the dimensions of Openness to the experience subscale and Agreeable subscale. However, there were no significant differences about the test function. 4. Exploring the psychometrics properties of answer formats of five-, six-, seven-, ten-points, it was showed that different measurement validity between online survey and paper-and-pencil test. It was also described the lower reliability and validity of six-point scale. In conclusion, the results support the application of personality scale online, but for attitude scale, we need to choose prudently.

品牌属性权重判断的反应时研究

In current days, many companies have carried out their branding strategies, because strong brand usually provides confidence and reduce risks to its consumers. No matter what a brand is based on tangible products or services, it will possess the common attributes of this category, and it also has its unique attributes. Brand attribute is defined as descriptive features, which are intrinsic characteristics, values or benefits endowed by users of the product or service (Keller, 1993; Romaniuk, 2003). The researches on models of brand multi-attributes are one of the most studied areas of consumer psychology (Werbel, 1978), and attribute weight is one of its key pursuits. Marketing practitioners also paid much attention to evaluations of attributes. Because those evaluations are relevant to the competitiveness and the strategies of promotion and new product development of the company (Green & Krieger, 1995). Then, how brand attributes correlate with weight judgments? And what features the attribute judgment reaction? Especially, what will feature the attribute weight judgment process of consumer who is facing the homogeneity of brands? Enlightened by the lexical hypothesis of researches on personality traits of psychology, this study choose search engine brands as the subject and adopt reaction time, which has been introduced into multi-attributes decision making by many researchers. Researches on independence of affect and cognition and on primacy of affect have cued us that we can categorize brand attributes into informative and affective ones. Meanwhile, Park has gone further to differentiate representative and experiential with functional attributes. This classification reflects the trend of emotion-branding and brand-consumer relationship. Three parts compose the research: the survey to collect attribute words, experiment one on affective primacy and experiment two on correlation between weight judgment and reaction. The results are as follow: In experiment one, we found: (1) affect words are not rated significantly from cognitive attributes, but affect words are responded faster than cognitive ones; (2) subjects comprehend and respond in different ways to functional attribute words and to representative and experiential words. In experiment two, we fund: (1) a significant negative correlation between attributes weight judgment and reaction time; (2) affective attributes will cause faster reaction than cognitive ones; (3) the reaction time difference between functional and representative or experiential attribute is significant, but there is no different between representative and experiential. In sum, we conclude that: (1): In word comprehension and weight judgment, we observed the affective primacy, even when the affect stimulus is presented as meaningful words. (2): The negative correlation between weight judgment and reaction time suggest us that the more important of attribute, the quicker of the reaction. (3): The difference on reaction time of functional, representative and experiential reflects the trend of emotional branding.

植入式广告与普通插播广告的效果比较及其影响因素

Brand placement is to present the information of products and brands through certain entertainments and non-commercial areas. Since 1990's, brand placement has become a major way of spreading advertisement and a new growing point of the global advertising market. In china, it is easily seen from spring festival evening gala of CCTV to all kinds of movie and TV shows, and is thus interested by many brand owners, advertisers and communication researchers. Since 2006, the people in the media circles have begin to take full care of the study of the brand placement. In general, there is still certain distance between the theoretical studies and the reality. It's a general problem over the world and is especially true for China as this was just a new idea. As the biggest global economic entity, China is the most potential and powerful market, thus the market of the brand placement will be huge. To push its development, it's then crucial to have theoretical studies on it. Many questions have not been explained yet in this area, mostly essential is to ask what kind of advantage it acquires compared with the traditional advertisement, if there is, how does such advantage show? What kind of factors influents the market effect of the brand placement? All these questions are not answered yet. Also it's well-known that a successful advertisement relies heavily on the understanding of the culture. Thus a specific thing to deal with is to study the effects according to the Chinese culture, which can make constructive suggestion to the whole industry. Our research is to compare the effects between the brand placement with the ordinary media advertisements, discuss its possible influences, and try to make certain suggestions to the future running and development. Our research obtains the following results by using the movie and advertisement in reality: (1) Like ordinary media ad’s, brand placement can improve the brand recognition of the audience significantly. (2) The ordinary ad's make the people easier to remember them than brand placement, while not too much difference in the brand recognition. (3) The brand placement has a significant 'emotional shifting' effect, i.e. the more positive to the movie, the more you love the built-in brand. (4) It is an important factor that how much brand information is involved in the movie; while how much the plot is involved has great impact on the 'emotional shifting' effect. (5) The familiarity is a great factor for the ad's, it's obvious that the popular products get way better effects through brand replacement. (6) An effective way is to choose those positive, interesting and eye-catching movies and TV shows as carriers of the brand and to use it as natural as possible.