Interferometric Measurement of Density in Nonstationary Shock Wave Reflection Flow and Comparison with CFD

We present density measurements from the application of interferometry and Fourier transform fringe analysis to the problem of nonstationary shock wave reflection over a semicircular cylinder and compare our experimental measurements to theoretical results from a CFD simulation of the same problem. The experimental results demonstrate our ability to resolve detailed structure in this complex shock wave reflection problem, allowing visualization of multiple shocks in the vicinity of the triple point, plus visualization of the shear layer and an associated vortical structure. Comparison between CFD and experiment show significant discrepancies with experiment producing a double Mach Reflection when CFD predicts a transitional Mach reflection.

Reliable Validation Based on Optical Flow Visualization for CFD Simulations

A reliable validation based on the optical flow visualization for numerical simulations of complex flowfields is addressed in this paper. Several test cases, including two-dimensional, axisymmetric and three-dimensional flowfields, were presented to demonstrate the effectiveness of the validation and gain credibility of numerical solutions of complex flowfields. In the validation, images of these flowfields were constructed from numerical results based on the principle of the optical flow visualization, and compared directly with experimental interferograms. Because both experimental and numerical results are of identical physical representation, the agreement between them can be evaluated effectively by examining flow structures as well as checking discrepancies in density. The study shows that the reliable validation can be achieved by using the direct comparison between numerical and experiment results without any loss of accuracy in either of them.

Combination Of Cfd And Csd Packages For Fluid-Structure Interaction

In this article the UDF script file in the Fluent software was rewritten as the "connecting file" for the Fluent and the ANSYS/ABAQUS in order that the joined file can be used to do aero-elastic computations. In this way the fluid field is computed by solving the Navier-Stokes equations and the structure movement is integrated by the dynamics directly. An analysis of the computed results shows that this coupled method designed for simulating aero-elastic systems is workable and can be used for the other fluid-structure interaction problems.

CFD结合降阶模型预测阵风响应

传统的阵风响应主要在频域内进行分析，气动载荷基于线性方法计算，不能考虑黏性和跨声速流动影响．飞机设计需考虑不同频率和不同形状阵风的响应，基于CFD的阵风响应预测由于计算工况太多，工作量巨大．本文发展了一种CFD结合非定常气动力ARMA（autoregressive—moving—averagemodel）降阶模型的阵风响应分析方法，CFD只要针对给定频率和形状的一种阵风响应进行计算，对获得的气动力时间历程运用线性最小二乘法参数辨识ARMA降阶模型的系数，则对任意频率和形状的阵风，代入降阶模型即可确定该阵风的响应，大大提高了计算效率．为效验发展的方法，先计算NACA0012翼型在低马赫数0．11的阵风响应，通过对比CFD、ARMA降阶模型及早期发展的不可压阵风响应预测方法的结果，验证了方法的有效性．再对比CFD、ARMA在跨声速马赫数0．8的阵风响应预测结果，证实所发展的方法对跨声速阵风响应预测亦是有效的．

干扰剪切流动(ISF)和边界层流动及ISF理论在计算流体力学(CFD)中的应用

简述作者提出的干扰剪切流动(ISF)理论、近壁复杂ISF理论、推论和它们在CFD中的应用.ISF是小黏性流体运动中普遍存在的一种基本流动,如驻点流、近壁黏性-无黏干扰流动,干扰可忽略时ISF的黏性部分为熟知的边界层流动.ISF理论揭示了高Re数流动计算的最佳坐标系和最佳网格生成.由近壁复杂ISF理论与流体运动方程组及流速在壁面无滑移条件相结合导出一组壁面相容(SC)判据,该判据提供了利用CFD仿真结果判断CFD仿真可信度的理论途径、并为近壁网格、算法和边界处理的改进和三者的更好协调、为湍流模型的评估、改进和发展提供了一种理论途径.

人机环境系统中CFD的研究

采用ＣＦＤ技术对人机环境系统中的一个典型问题——飞机空调座舱的舒适性进行了数值模拟，建立了相应的数值模拟方法，扩展了原有算法。数值模拟的成功，充分展示了ＣＦＤ技术在人机环境系统中的作用与可能带来的效益。

Chemical equilibrium analysis and CFD simulation of coal combustion and NOx formation

A full two-fluid model of reacting gas-particle flows with an algebraic unified second-order moment (AUSM) turbulence-chemistry model is used to simulate Beijing coal combustion and NOx formation. The sub-models are the k-epsilon-kp two-phase turbulence model, the EBU-Arrhenius volatile and CO combustion model, the six-flux radiation model, coal devolatilization model and char combustion model. The blocking effect on NOx formation is discussed. In addition, the chemical equilibrium analysis is used to predict NOx concentration at different temperature. Results of CID simulation and chemical equilibrium analysis show that, optimizing air dynamic parameters can delay the NOx formation and decrease NOx emission, but it is effective only in a restricted range. In order to decrease NOx emission near to zero, the re-burning or other chemical methods must be used.

基于CFD分析的弧形翼导弹气动外形优化

为探索将高精度CFD分析引入高超声速飞行器气动外形优化设计的可行性,以6°飞行攻角、6马赫飞行速度下的最大升阻比为目标,引入CFD分析计算气动性能,使用Nelder-Mead可变多面体搜索方法对高超声速弧形翼导弹进行了气动外形优化.计算结果表明,在满足弹翼安全性的条件下,优化外形比初始外形的升阻比有明显提高(约9.22%),同时阻力系数、弹翼展长和弹翼面积均有不同程度的降低.计算结果充分证明了优化设计的有效性和采用CFD分析的必要性.依据该文结果提出一种前掠弧形翼高超声速导弹气动布局方案.