退耕还林(草)和降雨变化对延河流域土壤侵蚀的影响

通过定量评估退耕还林(草)和降雨变化对延河流域土壤侵蚀的影响,为延河流域水土保持效益评价、流失治理和环境建设提供决策参考。【方法】利用延河流域日降雨、数字高程模型、土壤类型图、土地利用图和植被覆盖图,运用RUSLE模型,在ArcGIS平台的支持下计算流域1997年和2000年土壤侵蚀量,并分别模拟了退耕还林(草)和气候变化对土壤侵蚀的影响。【结果】由于降雨的变化,研究区年降雨侵蚀力均值由1997年的775.32MJ·mm·hm-2·h-1·a-1增加到了2000年的1292.07MJ·mm·hm-2·h-1·a-1,降雨大大加剧了流域土壤侵蚀;由于退耕还林(草)政策的实施,坡耕地面积大大减少,林草面积增加,植被覆盖和管理因子值显著减少,由退耕还林(草)前的0.1714下降到了退耕还林(草)后0.1592,减小了流域土壤侵蚀;由于退耕还林(草)的实施、气候变化以及水土保持工程措施和耕作措施变化共同影响,单位面积平均土壤侵蚀量由退耕还林(草)前的3012t·km-2·a-1增加到了退耕还林(草)后4671t·km-2·a-1,年土壤侵蚀总量2314×104t增加到了3589×104t。【结论】降雨变化使得...

Modeling All-sky Global Solar Radiation Using MODIS Atmospheric Products: A Case Study in Qinghai-Tibet Plateau

The surface solar radiation (SSR) is of great importance to bio-chemical cycle and life activities. However, it is impossible to observe SSR directly over large areas especially for rugged surfaces such as the Qinghai-Tibet Plateau. This paper presented an improved parameterized model for predicting all-sky global solar radiation on rugged surfaces using Moderate Resolution Imaging Spectroradiometer (MODIS) atmospheric products and Digital Elevation Model (DEM). The global solar radiation was validated using 11 observations within the plateau. The correlation coefficients of daily data vary between 0.67-0.86, while those of the averages of 10-day data are between 0.79-0.97. The model indicates that the attenuation of SSR is mainly caused by cloud under cloudy sky, and terrain is an important factor influencing SSR over rugged surfaces under clear sky. A positive relationship can also be inferred between the SSR and slope. Compared with horizontal surfaces, the south-facing slope receives more radiation, followed by the west- and east-facing slopes with less SSR, and the SSR of the north-facing slope is the least.

工程地质三维建模与可视化技术应用开发

Synthetic Geology Information System (SGIS) is an important constituent part of the theory of Engineering Geomechanics Mate-Synthetic (EGMS), and is the information system more suited for the collection, storage, management, analysis and processing to the information coming from engineering geology,' geological engineering and geotechnical engineering. Its contents involve various works and methods of the investigation, design, and construction in different stages of the geological engineering. Engineering geological and three-dimensional modeling and visualization is the fundamental part of the SGIS, and is a theory, method and technique by which, adopting the computer graphics and image processing techniques, the data derived from engineering geological survey and the calculated results obtained from the geomechanical numerical simulation and analysis are converted to the graphics and images displayed on the computer screen and can be processed interactively. In this paper, the significance and realizing approaches of the three-dimensional modeling and visualization for the complex geological mass in the engineering geology are discussed and the methods of taking advantage of the interpolation and fitting for the scattered and field-surveyed data to simulate the geological layers, such as the topography and earth surface, the groundwater table and the stratum boundary, are researched into. At the mean time, in mind the characteristics of the structure of the basic data for three-dimensional modeling, its visual management can be resolved into the engineering surveyed database management module, plot parameter management module and data output module and the requirement for basic data management can be fulfilled. In the paper, the establishment and development of the three-dimensional geological information system are probed tentatively, and an instance of three-dimensional visual Engineering Distribution Information System (EDIS), theConstruction Management Information System for an airport, in which the functions, such as the real-time browse among the three-dimensional virtual-reality landscapes of the airport construction from start to finish, the information query to the airport facility and the building in the housing district and the recording and playback of the animation sets for the browse and the takeoff and landing of the planes, is developed by applying the component-mode three-dimensional virtual-reality geological information system (GIS) software development kits (SDK), so the three-dimensional visual management platform is provided for the airport construction. Moreover, in the gaper, integrated with the three-dimensional topography visualization and its application in the Sichuan-Tibet Highways, the method of the digital elevation model (DEM) data collection from the topographic maps is described, and the three-dimensional visualization and the roaming about the terrain along the highway are achieved through computer language programming. Understanding to the important role played by the varied and unique topographical condition in the gestation and germination of the highly-dense, frequently-arising and severely-endangered geological hazards can be deepened.

A hierarchical approach coupled with coarse DEM information for improving the efficiency and accuracy of forest mapping over very rugged terrains

Forest mapping over mountainous terrains is difficult because of high relief Although digital elevation models (DEMs) are often useful to improve mapping accuracy, high quality DEMs are seldom available over large areas, especially in developing countries

基于钻孔资料建立多层数字高程模型及其应用

根据某矿区的地质钻孔资料,划分了不同层面并对地层的交叉与缺失做了处理.利用不同层面的高程值建立不同层面的等高线,再由Kriging插值法得到矿区的三维地层模型.从所建模型中抽取剖面图并与矿区实际勘探线剖面图进行比较,验证了模型的可靠性.最后从建立的多层DEM模型中抽取剖面数据进行有限元数值模拟,并与实际勘探和采掘过程中揭露的断层位置比较,两者结果非常吻合,为该矿区采掘设计和构造预测提供了一定的参考.

激光微地貌扫描仪的开发研制及在坡面侵蚀研究应用初步

利用光线的反射与聚焦成象原理 ,将地表高程转换成不同物象点位置的电信号 ,再经计算机处理成数字高程模型 ,即形成用于获取地表糙度数字高程模型的激光微地貌扫描仪。实验测量得到 :在相同初始条件下 ,不同坡度土槽放水和降雨实验后地表形态的数字地形模型。通过对侵蚀地表形态的分析 ,得出坡度对坡面侵蚀及沟蚀影响的某些初步规律。

基于GIS和CSLE的陕西省土壤侵蚀定量评价方法研究

通过对陕西省土壤侵蚀的定量评估,探索省域尺度上土壤侵蚀定量评价制图方法,以期为第四次全国土壤侵蚀普查提供技术支撑。利用陕西省日降雨数据、土壤类型图、土地利用图、DEM、植被覆盖图,选择CSLE模型,在ArcGIS平台上计算研究区2006年土壤侵蚀量,并与水利部标准评价结果进行对比分析。探索了坡度坡长变换对土壤侵蚀的影响。定量化的评价结果能较好的反映气候、土壤及水保措施对土壤侵蚀的影响,比水利部标准评价结果更能反映实际侵蚀。坡度坡长变换后对土壤侵蚀有明显影响。在GIS支持下,通过土壤侵蚀模型进行定量评价,可高效、客观反映土壤侵蚀情况及其主要影响因子,对区域治理和有关决策有极其重要参考价值。为了准确真实的反映土壤侵蚀程度,必须进行坡度坡长变换。

Impacts of anthropogenic activity on the recent evolution of the Huanghe (Yellow) River delta

Hydrological statistical data, remote sensing images, and bathymetric charts were used to study the recent evolution of the Huanghe (Yellow) River delta under human-induced interventions. It was clear that water and sediment discharge from the Huanghe River had dropped rapidly since 1970, particularly after 1986. The water and sediment discharges for the period of 1986-2000 were found to have been reduced to only 29.2% and 31.2% of those in the period of 1950-69. This was caused by human factors in the upper and middle reaches of the Huanghe River, including water diversion, damming and reservoir construction, and water and soil conservation. Based on the results from visual interpretation of processed Landsat (MSS or TMJETM+) images dated from 1976 to 2001 and two digital elevation models generated from bathymetric charts surveyed in 1976 and 1992, we found that human-induced reduction of water and sediment discharge led to coastline retrogradation, with the maximum mean recession rate of -0.51 km yr-1 over the period of 1976-98, and seabed erosion beyond the -20 m isobath between 1976 and 1992. Other impacts of human activities on the recent evolution of the Huanghe River delta, including tidal flats shrinking, artificial coastline increasing, land surface sinking and so on, were also analyzed. We found that: (i) the whole delta, including subaerial and subaqueous, has turned from a highly constructive period to a destructive phase; (ii) channelization and dredging were two of the main causes of delta destruction; (iii) land loss in the Huanghe River delta caused by submersion will be increased in the near future; (iv) the Huanghe River delta was becoming more fragile and susceptible to natural hazards.

基于SP95标准的工厂模型设计与建模方法研究

为解决当前数字化工厂模型所存在的实时性不强和集成性不足等问题,提出了使用管控系统间集成通用标准--SP95标准进行数字化工厂建模。在应用SP95标准对工厂模型进行定义和描述的基础上,结合国内离散企业中的实际情况,提出了一种扩展的工厂模型。该模型在SP95标准的基础上扩展了料架和变量两个元素,并介绍了其实现方式和作用。通过SP95标准提供的功能,扩展了基于可扩展标记语言技术的制造标记语言的Schema结构,为业务系统集成提供统一的数据共享格式。最后给出了一个构建工厂模型的实例,验证了所提出的模型。

基于数字化生产模型的事件建模系统设计

文章主要对基于数字化生产模型的事件建模系统进行了介绍。首先引入了支撑事件建模系统的MES基础运行平台,介绍了平台的功能以及系统结构;接着描述了事件的相关概念,并对事件建模系统的设计方法进行了介绍,最后给出了系统的具体应用实例。

The Chinese rare minnow (Gobiocypris rarus) as an in vivo model for endocrine disruption in freshwater teleosts: a full life-cycle test with diethylstilbestrol

Chinese rare minnow (Gobiocypris rarus), a freshwater teleost,. was exposed to diethylstilbestrol (DES) at 0.05, 0.5, 1 and 5 mug/L from fertilized eggs for up to mature period under flow-through condition. Several endpoints that related to development, reproductive fitness and transgenerational effects were evaluated. It was found that body length and body weight were significantly reduced and vitellogenin (Via) levels were significantly increased for fish exposed to DES. Histological examination showed that the sex ratios of F-0 fish skewed to female and about 2% of the fish exposed to 0.05 mug/L DES developed testes-ova. The reproductive success, as determined from data on egg production, was reduced in female fish exposed to 0.05, 0.5, 1 and 5 mug/L DES. The lowest-observed-effect concentrations (LOEC) for chances of sex ratios, reproductive success and histology alteration of F-0 are 0.05 mug/L. In the offspring, transgenerational effects on egg hatching rate. egg fertilization and Vtg levels of juvenile individuals were not observed. However. survival of F, generation fry significantly declined. The analysis of sex steroid levels revealed a significant decrease of testosterone (T) in the whole body homogenates (WBH) of male progeny and somewhat elevation of estradiol (E-T) in the WBH of female offspring. These findings indicate that exposure to DES causes a variety of developmental, reproductive and transgenerational effects. (C) 2004 Elsevier B.V. All rights reserved.

CFD-DEM simulation of three-dimensional aeolian sand movement

A three-dimensional CFD-DEM model is proposed to investigate the aeolian sand movement. The results show that the mean particle horizontal velocity can be expressed by a power function of heights. The probability distribution of the impact and lift-off velocities of particles can be described by a log-normal function, and that of the impact and lift-off angles can be expressed by an exponential function. The probability distribution of particle horizontal velocity at different heights can be described as a lognormal function, while the probability distribution of longitudinal and vertical velocity can be described as a normal function. The comparison with previous two-dimensional calculations shows that the variations of mean particle horizontal velocity along the heights in two-dimensional and three-dimensional models are similar. However, the mean particle density of the two-dimensional model is larger than that in reality, which will result in the overestimation of sand transportation rate in the two-dimensional calculation. The study also shows that the predicted probability distributions of particle velocities are in good agreement with the experimental results.

黄土丘陵沟壑区1∶1万及1∶5万比例尺DEM地形信息容量对比

黄土丘陵沟壑区地形变化异常复杂 ,1∶5万地形图对原始 1∶1万地形图等高线形态综合、取舍程度很大 ,这些都在不同程度上影响了地形分析结果的准确性。以高精度的 1∶1万比例尺DEM为校准值 ,运用 1∶1万及 1∶5万比例尺DEM叠合比较分析的方法 ,研究 1∶5万DEM的地形信息容量及提取不同地形要素的精度。试验结果表明 ,在黄土丘陵区 ,与 1∶1万DEM相比 ,1∶5万DEM在所提取的地面坡度、地面曲率、沟壑量等地形定量指标方面均都存在着较大的误差。

不同比例尺DEM提取地面坡度的精度研究——以在黄土丘陵沟壑区的试验为例

以陕北绥德县韭园沟流域为试验样区 ,采用高精度 1∶ 1万 DEM所提取的坡度为准值 ,应用多层面复合分析和比较分析的方法 ,研究该地区 1∶ 5万 DEM提取地面坡度的误差特征与纠正方法。试验结果显示 ,所获得的不同空间尺度下 DEM所提取坡度值的转换图谱 ,可对 1∶ 5万 DEM计算的地面坡度统计值进行有效修正。该成果对于 DEM数据在水土保持领域若干应用标准的制定 ,提供了重要的理论依据与技术路线