75 resultados para Diffusion Equation
em Chinese Academy of Sciences Institutional Repositories Grid Portal
Resumo:
A perturbational h4 compact exponential finite difference scheme with diagonally dominant coefficient matrix and upwind effect is developed for the convective diffusion equation. Perturbations of second order are exerted on the convective coefficients and source term of an h2 exponential finite difference scheme proposed in this paper based on a transformation to eliminate the upwind effect of the convective diffusion equation. Four numerical examples including one- to three-dimensional model equations of fluid flow and a problem of natural convective heat transfer are given to illustrate the excellent behavior of the present exponential schemes, the h4 accuracy of the perturbational scheme is verified using double precision arithmetic.
Resumo:
The convective--diffusion equation is of primary importance in such fields as fluid dynamics and heat transfer hi the numerical methods solving the convective-diffusion equation, the finite volume method can use conveniently diversified grids (structured and unstructured grids) and is suitable for very complex geometry The disadvantage of FV methods compared to the finite difference method is that FV-methods of order higher than second are more difficult to develop in three-dimensional cases. The second-order central scheme (2cs) offers a good compromise among accuracy, simplicity and efficiency, however, it will produce oscillatory solutions when the grid Reynolds numbers are large and then very fine grids are required to obtain accurate solution. The simplest first-order upwind (IUW) scheme satisfies the convective boundedness criteria, however. Its numerical diffusion is large. The power-law scheme, QMCK and second-order upwind (2UW) schemes are also often used in some commercial codes. Their numerical accurate are roughly consistent with that of ZCS. Therefore, it is meaningful to offer higher-accurate three point FV scheme. In this paper, the numerical-value perturbational method suggested by Zhi Gao is used to develop an upwind and mixed FV scheme using any higher-order interpolation and second-order integration approximations, which is called perturbational finite volume (PFV) scheme. The PFV scheme uses the least nodes similar to the standard three-point schemes, namely, the number of the nodes needed equals to unity plus the face-number of the control volume. For instanc6, in the two-dimensional (2-D) case, only four nodes for the triangle grids and five nodes for the Cartesian grids are utilized, respectively. The PFV scheme is applied on a number of 1-D problems, 2~Dand 3-D flow model equations. Comparing with other standard three-point schemes, The PFV scheme has much smaller numerical diffusion than the first-order upwind (IUW) scheme, its numerical accuracy are also higher than the second-order central scheme (2CS), the power-law scheme (PLS), the QUICK scheme and the second-order upwind(ZUW) scheme.
Resumo:
Perturbations are applied to the convective coefficients and source term of a convection-diffusion equation so that second-order corrections may be applied to a second-order exponential scheme. The basic Structure of the equations in the resulting fourth-order scheme is identical to that for the second order. Furthermore, the calculations are quite simple as the second-order corrections may be obtained in a single pass using a second-order scheme. For one to three dimensions, the fourth-order exponential scheme is unconditionally stable. As examples, the method is applied to Burgers' and other fluid mechanics problems. Compared with schemes normally used, the accuracies are found to be good and the method is applicable to regions with large gradients.
Resumo:
The diffusive transport properties in microscale convection flows are studied by using the direct simulation Monte Carlo method. The effective diffusion coefficient D is computed from the mean square displacements of simulated molecules based on the Einstein diffusion equation D = x2 t /2t. Two typical convection flows, namely, thermal creep convection and Rayleigh– Bénard convection, are investigated. The thermal creep convection in our simulation is in the noncontinuum regime, with the characteristic scale of the vortex varying from 1 to 100 molecular mean free paths. The diffusion is shown to be enhanced only when the vortex scale exceeds a certain critical value, while the diffusion is reduced when the vortex scale is less than the critical value. The reason for phenomenon of diffusion reduction in the noncontinuum regime is that the reduction effect due to solid wall is dominant while the enhancement effect due to convection is negligible. A molecule will lose its memory of macroscopic velocity when it collides with the walls, and thus molecules are hard to diffuse away if they are confined between very close walls. The Rayleigh– Bénard convection in our simulation is in the continuum regime, with the characteristic length of 1000 molecular mean free paths. Under such condition, the effect of solid wall on diffusion is negligible. The diffusion enhancement due to convection is shown to scale as the square root of the Péclet number in the steady convection regime, which is in agreement with previous theoretical and experimental results. In the oscillation convection regime, the diffusion is more strongly enhanced because the molecules can easily advect from one roll to its neighbor due to an oscillation mechanism. © 2010 American Institute of Physics. doi:10.1063/1.3528310
Resumo:
摄动有限差分(PFD)方法是构造高精度差分格式的一种新方法。变步长摄动有限差分方法是等步长摄动有限差分方法的发展和推广。对需要局部加密网格的计算问题,变步长PFD格式不需要对自变量进行数学变换,且和等步长PFD格式一样,具有如下的共同特点:从变步长一阶迎风格式出发,通过把非微商项(对流系数和源项)作变步长摄动展开,展开幂级数系数通过消去摄动格式修正微分方程的截断误差项求出,由此获得高精度变步长PFD格式。该格式在一、二和三维情况下分别仅使用三、五和七个基点,且具有迎风性。文中利用变步长PFD格式对对流扩散反应模型方程,变系数方程及Burgers方程等进行了数值模拟,并与一阶迎风和二阶中心格式及其问题的精确解作了比较。数值试验表明,与一阶迎风和二阶中心格式相比,变步长PFD格式具有精度高,稳定性与收敛性好的特点。变步长PFD格式与等步长PFD格式相比,变步长PFD解在薄边界层型区域的分辨率得到了明显的提高。
Resumo:
A three-dimensional analytical solution of the microheater temperature based on heat diffusion equation is developed and compared with experimental results. Dimensionless parameters are introduced to analyze the temperature rise time and the distribution under steady state. To study the microheater temperatures before bubble nucleation, a set of working fluids and microheaters are considered. It is shown that the dimensionless time xi(-)(0) required for the temperature rise from room to 95% of the steady state temperature is about 75, not dependent on working fluids and microheaters. Heat transfer to the surrounding liquid is mainly caused by conduction, not by convection and radiation mechanisms. The microheater length affects the surface temperature uniformity, while its width influences the steady temperatures significantly, yielding the transition from heterogeneous to homogeneous nucleation mechanism from square microheaters to narrow line microheaters.
Resumo:
利用高智提出的数值摄动算法,把求解对流扩散方程常用三阶迎风格式(3-UDS)(粘性项和对流项分别用二阶中心格式和3-UDS离散)进行了高精度重构,包括使用离散单元内所有节点的全域重构和分别使用上下游节点的上下游重构,得到两类新的更高阶精度迎风差分格式,称为高的迎风差分格式(记作GUDS)。讨论了GUDS的数学性质,GUDS比原来的3-UDS精度显著提高;全域重构的GUDS和3-UDS均为条件稳定,一些上下游重构GUDS为绝对稳定。本文通过稳定性分析和四个算例(一维常系数、变系数、非线性及二维变系数对流扩散方程)的计算证实了GUDS的优良性质。上下游重构GUDS为避免在3-UDS中使用人工粘性提供了一条有效途径,适合于求解高Reynolds数线性和非线性问题。
Resumo:
将作者提出的数值摄动算法改进为区分离散单元内上游和下游并分别对通量进行高精度重构的双重数值摄动算法,与原(单重)摄动算法相比,双重摄动算法既提高了格式精度又明显扩大了格式的稳定域范围,利用双重摄动算法,即分别利用上游和下游基点变量的摄动重构将高阶流体力学关系及迎风机制耦合进二阶中心格式之中,由此构建了对流扩散方程的对网格Reynolds数的任意值均稳定(绝对稳定)高精度(四阶和八阶精度)三基点中心TVD差分格式,通过解析分析以及3个算例计算证实了构建格式的优良性能;3个算例包括一维线性、非线性(Burgers方程)和二维变系数对流扩散方程,数值计算表明:构建的格式在粗网格下不振荡,构建格式在粗网格时的最大误差L∞和均方误差L2与二阶中心格式在细网格时的相应误差一致,对线性方程,构建格式在细网格下可达到L2精度阶
Resumo:
The novel phase field model with the "polymer characteristic" was established based on a nonconserved spatiotemporal Ginzburg-Landau equation (TDGL model A). Especially, we relate the diffusion equation with the crystal growth faces of polymer single crystals. Namely, the diffusion equations are discretized according to the diffusion coefficient of every lattice site in various crystal growth faces and the shape of lattice is selected based on the real proportion of the unit cell dimensions.
Resumo:
As we know, the essence of exploration is objective body determined by getting the information. Such as seismic、electrical and electromagnetic prospecting, they are the common methods of the exploration. Therefore, They have a complete set of theory now. In fact, the effective information can also be got by the diffusion way, it is called diffusion prospecting. The diffusion way prospecting is necessary and important. The way of diffusion prospecting is studied in the paper and main works include below: (1) On the basis of studying basic law of the diffusion, the paper gives the idea of diffusion wave and the formulas of computing diffusion wave function. (2) The paper studies the way of the diffusion prospecting and the methods of data processing. At the same time, it also expounds the characteristics and the applied foreground of the diffusion prospecting. (3) The paper gives the tomography idea and the basic method of diffusion CT. Meanwhile, it also expounds the foreground that the diffusion CT is applied in oil development prospecting. (4) As the inversion of the diffusion equation is a part of the diffusion prospecting way, the methods of diffusion equation inversion are studied and the two formulas are deduced --Laplace transform and polynomial fitting inversion formulas. As the other important result of diffusion equation inversion, the inversion can offer a new analysis method for well Testing in oil development. In order to show a set of methods in the paper feasible, forward、inversion and CT numerical simulation are done in the paper.
Resumo:
The boundary knot method (BKM) of very recent origin is an inherently meshless, integration-free, boundary-type, radial basis function collocation technique for the numerical discretization of general partial differential equation systems. Unlike the method of fundamental solutions, the use of non-singular general solution in the BKM avoids the unnecessary requirement of constructing a controversial artificial boundary outside the physical domain. The purpose of this paper is to extend the BKM to solve 2D Helmholtz and convection-diffusion problems under rather complicated irregular geometry. The method is also first applied to 3D problems. Numerical experiments validate that the BKM can produce highly accurate solutions using a relatively small number of knots. For inhomogeneous cases, some inner knots are found necessary to guarantee accuracy and stability. The stability and convergence of the BKM are numerically illustrated and the completeness issue is also discussed.
Resumo:
Improving the resolution of the shock is one of the most important subjects in computational aerodynamics. In this paper the behaviour of the solutions near the shock is discussed and the reason of the oscillation production is investigated heuristically. According to the differential approximation of the difference scheme the so-called diffusion analogy equation and the diffusion analogy coefficient are defined. Four methods for improving the resolution of the shock are presented using the concept of diffusion analogy.
Resumo:
The restriction of the one dimensional (1D) master equation (ME) with the mass number of the projectile-like fragment as a variable is studied, and a two-dimensional (2D) master equation with the neutron and proton numbers as independent variables is set up, and solved numerically. Our study showed that the 2D ME can describe the fusion process well in all projectile-target combinations. Therefore the possible channels to synthesize super-heavy nuclei can be studied correctly in wider possibilities. The available condition for employing 1D ME is pointed out.