Microstructures of explosively consolidated rapidly solidified aluminum and Al-Li alloy powders

The microstructures and the characteristics of water-atomized, nitrogen gas-atomized Al powders and ultrasonic argon gas-atomized Al-Li alloy powder were investigated by means of metallography, SEM, Auger electron spectroscopy and X-ray diffraction techniques. Rapidly solidified powders were explosively consolidated into different sized cylinders under various explosive parameters. The explosively consolidated compacts have been tested and analysed for density microhardness, retention of rapidly solidified microstructures, interparticle bonding, fractography and lattice distortion. It is shown that the explosive consolidation technique is an effective method for compacting rapidly solidified powders. The characteristics of surface layers play a very important role in determining the effectiveness of the joints sintered, and the Al-Li alloy explosive compacts present an abnormal softening appearance compared to the original powder.

Influential Factors of Loess Liquefaction and Pore Pressure Development

The liquefaction of loess under dynamic loading is studied experimentally with a dynamic triaxial test system. The effects of over-consolidation ratio (OCR), saturation degree and the frequency of dynamic loading upon loess liquefaction are investigated. The development of pore pressure within loess samples is also discussed. Based on the experimental results, the empirical relationship between pore pressure ratio and loading cycle number ratio is established for normal consolidated saturated loess.

Dislocations in the crystallites of nanocrystalline alpha-Fe - A molecular dynamics study

Molecular dynamics simulations are carried out in order to study the atomic structure of crystalline component, of nanocrystalline alpha-Fe when it is consolidated from small grains. A two-dimensional computational block is used to simulate the consolidation process. All the preset dislocations in the original grains glide out of them in the consolidation process, but new dislocations can generate when the grain size is large enough. It shows that dislocations exist in the consolidated material rather than in the original grains. Whether dislocations exist in the crystalline component of the resultant model nana-material depends upon grain size. The critical value of grain size for dislocation generation appears to be about 9 nm. This result agrees with experiments qualitatively.

A study of the mechanism of consolidating metal-powder under explosive-implosive shock-waves

A study of the two-dimensional flow pattern of particles in consolidation process under explosive-implosive shock waves has been performed to further understand the mechanism of shock-wave consolidation of metal powder, in which bunched low-carbon steel wires were used instead of powder. Pressure in the compact ranges from 6 to 30 GPa. Some wires were electroplated with brass, some pickled. By this means, the flow pattern at particle surfaces was observed. The interparticle bonding and microstructure have been investigated systematically for the consolidated specimens by means of optical and electron microscopy, as well as by microhardness. The experimental results presented here are qualitatively consistent with Williamson's numerical simulation result when particle arrangement is close packed, but yield more extensive information. The effect of surface condition of particle on consolidation quality was also studied in order to explore ways of increasing the strength of the compacts. Based on these experiments, a physical model for metal powder shock consolidation has been established.

Post-cyclic Strength Degradation of Undisturbed and Remolded Marine Silty Clay

A series of static and cyclic-static tri-axial compression tests under consolidated-undrained conditions are carried out to study the characteristics of post-cyclic strength of the undisturbed and the remolded samples of marine silty clay. It is found that the post-cyclic monotonic strength decreases if the cyclic strain or pore pressure is over a certain value. The maximum degradation is 10% for undisturbed samples while 70% for remolded ones. The relationship between normalized undrained shear strength and apparent overconsolidation ratio, which is determined by the excess pore pressure induced by cyclic loading, is also established. Static consolidated-undrained tests on overconsolidated remolded samples are also performed. It is proposed that the static consolidated-undrained tests may be substituted for the cyclic-static consolidated-undrained tests if the post-cyclic strength degradation of remolded silty clay is needed to be evaluated simply.

传值进程模型检测中诊断信息的生成

诊断信息自动生成是模型检测方法的基本特征之一，对分析和排错具有重要的意义，讨论了传值进程模型检测中诊断信息的生成问题，引入了两种诊断信息的表示结构：证明图和示例；提出了两种诊断信息的构造算法，所采用的方法是从检测过程保存的依赖信息中抽取证明图和示例，这样可以继承已有的信息，从而减少计算量，相应的算法已经实现并用实例作了分析测试，实验结果表明该方法是有效的。

时间符号迁移图及其互模拟判定

引入时间符号迁移图的概念，作为既涉及通讯又具有实时性的并发系统的模型。该文给出了这种迁移图时间互模拟的算法，并证明了该算法的正确性。

关于蜕变测试和特殊用例测试的实例研究

提出了基于蜕变测试方法的集成测试环境MTest,进而为检验蜕变测试方法的能力和效率,以稀疏矩阵乘法程序为例设计了一组实验.该实验基于变异分析技术,分别以mutation score和错误发现率为度量指标,定量地分析和对比了特殊用例测试,以特殊测试用例和随机测试用例为源测试用例的蜕变测试这3种方法的测试能力和效率.该实验可在MTest测试环境下自动完成.实验结果表明,蜕变测试与特殊用例测试之间是互补的,而且就蜕变测试的源测试用例而言,随机测试用例在测试能力和效率上优于特殊测试用例.

一种基于模型的并发系统测试目的描述

提出了带约束事件的时序逻辑TLCE,用于描述系统运行中输入/输出事件之间的时序关系以及对事件参数的数据相关性约束.阐述了一种基于模型的并发系统测试框架,采用TLCE描述测试目的以引导测试用例生成.缓存一致性协议和会议协议的实例研究中所生成的测试用例集显著优于随机测试用例集.这说明了TLCE作为测试目的描述的有效性.

传值系统的互模拟与谓词等式系

National Natural Science Foundation of China; Public Administration and Civil Service Bureau of Macau SAR; Companhia de Telecomunicacoes de Macau S.A.R.L.; Macau SAR Government Tourist Office

模型检测:理论、方法与应用

National Natural Science Foundation of China; Public Administration and Civil Service Bureau of Macau SAR; Companhia de Telecomunicacoes de Macau S.A.R.L.; Macau SAR Government Tourist Office

面向传值进程的一阶模态逻辑的可判定性与模型检测

对于面向传值进程的Hennesssy-Milner逻辑的一阶扩充HML(FO)，给出了基于带赋值的符号迁移图的语义解释。证明了HML(FO)的子逻辑HML(FO^2)是满足性可判定的，并且讨论了判定的复杂性。最后给出了传值进程关于HML(FO^2)的模型检测的可判定性结果。

带复杂数据结构的模型检测工具

模型检测是近二十几年来最成功的自动验证技术之一,而模型检测工具的开发是将模型检测和实际相结合的关键.为了有效地对涉及到复杂数据类型的并发传值系统进行模型检测,总结了以扩展的带赋值符号迁移图和模态图分别作为并发系统和逻辑公式的语义模型来实现模型检测工具的工作,特别是将复杂数据结构引入传值进程定义语言和带赋值符号迁移图.同时结合实际例子说明模型检测工具的有效性.

谓词μ演算和模态图的语义一致性

模态图是谓词μ演算的一种有效的图形表示形式。证明了谓词μ演算和模态图的语义一致性，详细讨论了谓词μ演算公式、嵌套谓词等式系和模态图之间的关系，并给出了一种优化的从线性公式到嵌套谓词等式系的转换算法。

面向传值进程的谓词μ-演算与FO(HML)的完备推演系统

National Natural Science Foundation of China; Public Administration and Civil Service Bureau of Macau SAR; Companhia de Telecomunicacoes de Macau S.A.R.L.; Macau SAR Government Tourist Office