Singularity characteristics for a lip-shaped crack subjected to remote biaxial loading

In this paper, the conformal mapping method was adopted to solve the problem of an infinite plate containing a central lip-shaped crack subjected to remote biaxial loading. A kind of leaf-shaped configuration was also constructed in order to solve the problem. The analytical result showed that the singularity order of the stress field at the tip of a lip-shaped crack remains -1/2, despite the difference in notch-crack width.

Effect of temperature on dislocation emission from crack tip for BCC metal Mo

The effect of thermally activated energy on the dislocation emission from a crack tip in BCC metal Mo is simulated in this paper. Based on the correlative reference model on which the flexible displacement boundary scheme is introduced naturally, the simulation shows that as temperature increases the critical stress intensity factor for the first dislocation emission will decrease and the total number of emitted dislocations increase for the same external load. The dislocation velocity and extensive distance among partial dislocations are not sensitive to temperature. After a dislocation emission, two different deformation slates are observed, the stable and unstable deformation states. In the stable deformation slate, the nucleated dislocation will emit from the crack tip and piles up at a distance far away from the crack tip, after that the new dislocation can not be nucleated unless the external loading increases. In the unstable deformation state, a number of dislocations can be emitted from the crack lip continuously under the same external load.

Hill Instability Analysis Of Tlp Tether Subjected To Combined Platform Surge And Heave Motions

This paper presents the Hill instability analysis of Tension Leg Platform (TLP) tether it, deep sea. The 2-D nonlinear beam model which is Undergoing Coupled axial and transverse vibrations, is applied. The governing equations are reduced to nonlinear Hill equation by use of the Galerkin's method and the modes superposition principle. The Hill instability charted Lip to large parameters is obtained. An important parameter M is defined and can he expressed as the functions of tether length, the platform surge and heave motion amplitudes. Some example studies are performed for various environmental conditions. The results demonstrate that the nonlinear coupling between the axial and transverse vibrations has a significant effect on the response of structure.. It needs to be considered for the accurate dynamic analysis of long TLP tether subjected to the combined platform surge and heave motions.

Complex stress functions and plastic zone sizes for notch cracks subjected to various loading conditions

In this paper, the conformal mapping method is used to solve the plane problem of an infinite plate containing a central lip-shaped notch subjected to biaxial loading at a remote boundary or a surface uniform pressure on the notch. The stress intensity factors KI and KII are obtained by the derived complex stress functions. The simple analytical expressions can be applied to the situation of cracks originating from a circular or an elliptical notch. The plastic zone sizes for such notch cracks are subsequently evaluated in light of the Dugdale strip yield concept. The results are consistent with available numerical data.

Integration property of a wedge-elliptic cone waverider with scramjet engine

The hypersonic waverider forebody is designed in this paper. For the present waverider, the undersurface is carved out as a stream surface of a hypersonic inviscid flow field around wedge-elliptic cone, and the upper surface is assumed to be a freestream surface. A finite-volume code is used to generate the three-dimensional flow field. The leading edge is determined by satisfying the condition that the lip is situated at the intersection line of shocks.

Effect Of Water On Brittle Fracture Of Sio2 By Molecular Dynamics Study

The influence of water on the brittle behavior of beta-cristobalite is studied by means of molecular dynamics (MD) simulation With the TTAM potential. Crack extension of mode 1 type is observed as the crack opening is filled LIP With water. The critical stress intensity factor K-lc(MD) is used to characterize the crack extension of MD simulation. The surface energy of SiO2 covered with layers of water is calculated at temperature of 300 K. Based oil the Griffith fracture criterion, the critical stress intensity factor K-lc(Griffith) is calculated, and it is in good agreement with that of MD simulation. (C) 2008 Elsevier B.V. All rights reserved.

A high-speed image sensing technique with adjustable frame rate based on an ordinary CCD

In the sinusoidal phase modulating interferometer technique, the high-speed CCD is necessary to detect the interference signals. The reason of ordinary CCD's low frame rate was analyzed, and a novel high-speed image sensing technique with adjustable frame rate based on ail ordinary CCD was proposed. And the principle of the image sensor was analyzed. When the maximum frequency and channel bandwidth were constant, a custom high-speed sensor was designed by using the ordinary CCD under the control of the special driving circuit. The frame rate of the ordinary CCD has been enhanced by controlling the number of pixels of every frame; therefore, the ordinary of CCD can be used as the high frame rate image sensor with small amount of pixels. The multi-output high-speed image sensor has the deficiencies of low accuracy, and high cost, while the high-speed image senor with small number of pixels by using this technique can overcome theses faults. The light intensity varying with time was measured by using the image sensor. The frame rate was LIP to 1600 frame per second (f/s), and the size of every frame and the frame rate were adjustable. The correlation coefficient between the measurement result and the standard values were higher than 0.98026, and the relative error was lower than 0.53%. The experimental results show that this sensor is fit to the measurements of sinusoidal phase modulating interferometer technique. (c) 2007 Elsevier GmbH. All rights reserved.

Taxonomic review of the genus Sinocrossocheilus Wu (Teleostei : Cyprinidae), with a description of four new species

All Sinocrossocheilus species, except S. microstomatus, are reviewed. Four new species, S. labiata, S. papillolabra, S. nigrovittata, and S. longibulla, are described. The genus Sinocrossocheilus differs from other genera of Cyprinidae by the last simple dorsal fin ray being unserrated and unossified, the last unbranched anal fin ray being unserrated and unossified, the 5-branched anal fin rays, the mouth gap being inferior, the rostral cap covering the lower jaw and connecting directly with the lower lip, a row of fleshy lobes on the lower jaw, and a cloudy black spot above the pectoral fin. Sinocrossocheilus labiata is small and has 22 predorsal scales; S. longibulla has a very large air bladder; S. papillolabra possesses a well-developed ventral fin and a wide band covered by fleshy papillae on the lower lip; and S. nigrovittata possesses black longitudinal stripes along the lateral line. Crossocheilus bamaensis and Crossocheilus liuchengensis are transferred to the genus Sinocrossocheilus. Sinocrossocheilus species are endemic to the central and eastern Yunnan-Guizhou Plateau of China, where river systems are anfractuous, including seasonal rivers, cave rivers, underground rivers, and streamlets between mountains. These separated rivers probably provide conditions for the allopatric speciation of the Sinocrossocheilus.

A new species of the genus Tor from Yunnan, China (Teleostei : Cyprinidae)

A new species of the subfamily Barbinae, Tor yingjiangensis, is recognized from Yunnan province, China. It can be distinguished from other Tor species by the following combination of characters: last simple dorsal-fin ray osseous and non-serrated; no forward directed predorsal procumbent spine; head length considerably longer than body depth; no tubercles on the snout or sides of the face; 18-20 gill rakers on the outside of first gill arch; 24-26 lateral line scales; median lobe of lower lip short, its posterior margin truncate, not extending to the vertical across the inner corners of the mouth; and the condition of the lower lip consistent in individuals of different sizes. The new species has been misidentified previously as Tor putitora (Hamilton, F. 1822. An account of the fishes found in the River Ganges and its Branches. Edinburgh & London. 405 pp), which occurs in the Ganges and Indus River basins. The new species can easily be distinguished from T. putitora by having 3-3.5 (vs. 2.5) scales from lateral line to pelvic-fin origin, shorter caudal peduncle length (13.0% vs. 17.2% of standard length), lesser body depth (26.4% vs. 24.0% of standard length) and longer caudal peduncle depth (12.0% vs. 10.9% of standard length), no longitudinal stripe present along side of body, and eyes visible in ventral view of head.

Schistura cryptofasciata, a new loach (Cypriniformes : Balitoridae) from Salween drainage in Yunnan, Southwestern China

Schistura cryptofasciata is distinguished from its congeners by following combination characters: lateral line complete; 8(1)/(2) branched dorsal-fin rays; 9+8 branched caudal-fin rays; no sexual dimorphism; 8-11 indistinct bars, wider than interspaces; caudal-peduncle length 44.1-16.5% standard length, 68.1-90.4% dorsal head length; anterior portion of body scaleless; air bladder entirely embedded in bony capsule; lateral head length 104-122% dorsal head length; lower jaw with a notch at symphysis; lower lip completely interrupted; interorbital width 1.9-2.2 times eye diameter; pelvic-fin origin ventral to dorsal-fin origin; anus 1.0-1.5 eye diameters in front of anal-fin origin; the widest part of black basal caudal bar is the midlateral, and then the upper and lower ends.

A new species of genus Pseudogyrinocheilus (Teleostei: Cyprinidae) from Guangxi, China

A new species, Pseudogyrinocheilus longisulcus, was discovered from a tributary of Pearl River in Jingxi Co., Guangxi, China, The new species can be distinguished from other species of Pseudogyrinocheilus by the following combination of characteristics: prolonged post-labial grooves, and extended antero-medially close to anterior end of middle lower lip, but not meeting with its counterpart; posterior margin of lower lip free; scales of abdomen from thorax to pectoral-fin base embedded under skin; lateral-line scales 40-42; dark stripe longitudinal along lateral line on flank. The key to the species of Pseudogyrinocheilus is provided.

The youngest split in sympatric schizothoracine fish (Cyprinidae) is shaped by ecological adaptations in a Tibetan Plateau glacier lake

Although new empirical evidence shows that sympatric speciation has occurred in some species, there are few indisputable model organisms for this process of speciation. The two subspecies (Gymnocypris eckloni eckloni and G. e. scoliostomus) of the schizothoracine Gymnocypris fish species complex from a small glacier lake in the Tibetan Plateau, Lake Sunmcuo, fit several of the key characteristics of the sympatric speciation model. We used combined mitochondrial control region sequences and the cytochrome b gene (1894 bp) to address the phylogenetics and population genetics of 232 specimens of G. e. eckloni and G. e. scoliostomus, as well as all of its closely related sister species. We found that: (i) a total of four old lineages were uncovered in the widespread G. e. eckloni, of which only one was shown to be shared with all G. e. scoliostomus individuals and (ii) the new subspecies (G. e. scoliostomus) evolved in Lake Sunmcuo from the ancestral G. e. eckloni population within approximately 0.057 Ma. These two taxa of the species complex are morphologically distinct, and reproductive isolation is further suggested. Ecological disruptive selection based on morphological traits (e.g. mouth cleft characters) and food utilization may be a mechanism of incipient speciation of two sympatric populations within Lake Sunmcuo. This study provides the first genetic evidence for sympatric speciation in the schizothoracine fish.

Revision of the labeonine genus Sinocrossocheilus (Teleostei : Cyprinidae) from South China

Sinocrossocheilus was recently diagnosed by Su et al. (2003) as consisting of nine species, i.e. S. bamaensis, S. guizhouensis, S. liuchengensis, S. longibullus, S. tridentis, S. microstomatus, S. nigrovittatus, S. labiatus, and S. papillolabrus. It is actually a catch-all genus that is composed of some species misidentified from Pseudocrossocheilus and Hongshuia. Sinocrossocheilus is here redefined based mainly on the details of the lower lip morphology; it is easily separated from all other Asian Labeonini genera in possessing a lower lip with its median lobe modified into a densely papillated, greatly protruded, crescentic fold and a papillose, slightly protruded, triangular fleshy pad which is posteriorly continuous with the mental region. Two species are recognized in this genus: S. guizhouensis and S. labiatus. Detailed redescriptions are given for the two species. All remaining species do not fit with the new definition of Sinocrossocheilus; six species, i.e. S. papillolabrus, S. nigrovittatus, S. bamaensis, S. longibullus, S. liuchengensis, and S. tridentis, should be moved to Pseudocrossocheilus and S. microstomatus to Hongshuia.

Triplophysa lixianensis, a new nemacheiline loach species (Pisces : Balitoridae) from the upper Yangtze River drainage in Sichuan Province, South China

Triplophysa lixianensis, a new nemacheiline loach species, is described from the Min Jiang of the upper Yangtze River drainage in Sichuan Province, South China. It can be separated from all other species of Triplophysa by having a unique combination of the following characters: posterior chamber of gas bladder greatly reduced or absent; caudal peduncle columnar with a roughly round cross- section at its beginning; anterior edge of lower jaw completely exposed or uncovered by lower lip; intestine short, forming a zigzag loop below stomach; dorsal- fin origin closer to caudal- fin base than to snout tip; pelvic fin inserted anterior to dorsal- fin origin; snout length 50.6 - 57.5 % of head length; eye diameter 12.3 15.4 % of head length; caudal peduncle length 25.1 - 27.1 % of standard length; anal fin with five branched rays; lower lip greatly furrowed with two thick lateral lobes; and body smooth or scaleless.

Description of a new genus and two new species of labeonine fishes from South China (Teleostei : Cyprinidae)

A new genus and two new species are described from the Pearl River drainage in Guangxi Province, South China. Hongshuia, new genus, can be distinguished from all other Asian genera of the Labeonini by having a lower lip with its median lobe modified into a round, fleshy plate peripherally greatly protruded so as to form a ring-like fold that is posteromedially continuous with the mental region, and centrally sunken so as to form a round, flat, fleshy pad. This genus is distinct from all other Asian labeonine genera of the Garrina except for one newly described species of Parasinilabeo ( P. longibarbus), Pseudocrossocheilus, and Sinocrossocheilus, in the presence of well-developed maxillary barbels. Hongshuia differs from the above three genera in the lower lip morphology, and further from both Pseudocrossocheilus and Qianlabeo in the number of pharyngeal tooth rows and from Sinocrossocheilus in the colour pattern. Two new species, H. banmo and H. paoli, differ in the distribution density and degree of development of papillae on the rostral fold, depth of indentations on the distal edge of the rostral fold, presence or absence of papillae on the lower lip, size and shape of tubercles on the tip of the snout and anterior portion of the lachrymal, length, position and colour pattern of the dorsal fin, and snout length.