莱州湾区域表层沉积物中多氯化萘、多溴联苯醚和氯化石蜡的研究

本研究建立了沉积物中氯化石蜡（CPs）的分析方法，对莱州湾和该区域主要河流的表层沉积物中多氯萘（PCNs），多溴联苯醚（PBDEs）和CPs进行了分析，获得了他们在研究区域的含量水平、空间分布和单体分布模式，并初步探讨了它们在环境中的来源和迁移规律，估算了这三类污染物在莱州湾表层沉积物中的储量，初步评估了莱州湾沿岸的工业排放与人类活动对海洋生态环境的影响。 莱州湾海洋和河流沉积物PCNs的含量分别为65-470 pg/g dw，52-5100 pg/g dw，平均值分别为260 pg/g dw，1100 pg/g dw。莱州湾沉积物中PCNs的含量较低，与发达国家的背景值相当，主要河流沉积物与其他地区的近海、海湾、湖泊沉积物的含量相当。该区域的PCNs主要以5-Cl和6-Cl为主，为工业来源，主要受化工行业的影响。石化工厂热过程产生的低氯组分可能也是该区域PCNs的一个重要来源。莱州湾的PCNs主要来自水体颗粒的输入，而大气沉降来源的贡献不明显。 河流沉积物ΣPBDEs（不包括BDE-209）的含量分别为0.01- 53 ng/g dw，BDE-209的含量为0.74- 280 ng/g dw，平均值分别为4.4 ng/g dw，51 ng/g dw。在组成上，BDE-209占绝对优势，比低溴代BDEs高1-2个数量级，这是由于我国市场上十溴联苯醚是最主要的溴代阻燃剂。ΣPBDEs与亚洲一些地区含量相当，比北美和欧洲一些地区要低；BDE-209含量含量高出北美和欧洲一些地区，处于较高的水平。河流沉积物中BDE-47与-99，BDE-183与-153、-154具有很好的相关性，而且这几种单体质量分数相当，说明莱州湾区域存在五溴和八溴两种工业BDE阻燃剂来源。海洋沉积物中ΣPBDEs的含量为nd- 0.66 ng/g dw，平均值为0.32 ng/g dw，处于较低水平，BDE-209的含量为0.66- 12 ng/g dw，平均值为5.1 ng/g dw，与欧美一些地区相当，主要来自水体颗粒的输入。 本研究用电子捕获低分辨质谱（ECNI-LRMS）建立了沉积物中CPs的分析方法。该方法基于ECNI质谱对SCCP的响应与其氯含量在一定范围内呈线性关系的特性，建立SCCP的总响应因子与氯含量的工作曲线，从而建立定量方法。重点改进了传统方法中由于SCCP标准品和样品中氯含量不同所造成的响应因子的差别，不再要求标准品的含氯量与样品一致，从而提高了SCCP的分析效率与方法准确性。实验发现，当SCCP的实际氯含量在51%-63%之间时，二者线性关系良好（r2>0.96）。用不同氯含量的标准参考品测试，误差为8%-43%。仪器检测限和方法检测限分别为25-400 μg/L，20 ng/g。类似地，建立了中链氯化石蜡（MCCP）的分析方法，工作曲线的实际氯含量范围为44-57%，仪器检测限40-600 μg/L，方法检测限为6 ng/g。通过对比样品与标准品的峰形特征，严格控制保留时间来辨别SCCP与MCCP，实验证明由于二者叠加导致的误差：SCCP为8%，MCCP为14%，总体来说，用该方法得到的CPs数据是可靠的。本文所使用的净化方法能实现CPs与大部分有机氯化合物的分离。 用该方法对莱州湾的沉积物的CPs进行定量，除了两个河流样品MCCP的计算含氯量低于工作曲线以外，其他样品的SCCP和MCCP的计算氯含量都在工作曲线的范围之内。河流沉积物中SCCP和MCCP的含量分别为1-1200 ng/g dw，1-3300 ng/g dw，MCCP/SCCP均值为1.2；含量分布变化较大，一些河段受到工业排放的影响，CPs浓度高出均值1-2个数量级，MCCP/SCCP值也显著高出平均值。莱州湾区域大部分河流的CPs含量与欧洲、北美和日本一些地区相当，而一些受到点源污染的河段则处于较高的水平。河流中SCCP的质量分布在不同的站位不一样，在受到点源影响的样品中，C13的质量分数明显增大，占优势地位，可能是由MCCP携带的SCCP组分所致。MCCP的质量分布在河流和海洋中没有区别，都是C14占绝对优势。从氯取代的组分来讲，所有样品都是以6-8氯取代为主。海洋沉积物中SCCP和MCCP的含量分别为3-18 ng/g dw，1-13 ng/g dw， MCCP/SCCP均值为0.68，显著低于河流沉积物；SCCP的质量分布较为一致，都是以C10和C11为主。研究发现莱州湾区域SCCP与MCCP来源相似，但迁移规律有的不同。海洋环境中的MCCP可能主要来自水体颗粒的输入，而溶解态输入也是海洋环境中SCCP的重要来源。 对这三类污染物在莱州湾表层沉积物中的储量估算得到PCNs、ΣPBDEs、BDE-209、SCCP和MCCP在莱州湾表层0-10 cm沉积物中的储量分别为0.20t，0.25t，3.95t，6.52t，4.30t。拥有10%的渤海海域面积的莱州湾ΣPBDEs和BDE-209的储量分别占渤海海区总量的18-23%，18-32%，远远超过渤海的平均值。

Fatty-acids and their C-13 signatures in seep carbonates from hydrocarbon seeps on the upper (GC 185) and lower (AC 645) continental slope of the Gulf of Mexico

Here we reported the fatty-acids and their δ 13C values in seep carbonates collected from Green Canyon lease block 185 (GC 185; Sample GC-F) at upper continental slope (water depth: ∼540 m), and Alaminos Canyon lease block 645 (GC 645; Sample AC-E) at lower continental slope (water depth: ∼2200 m) of the Gulf of Mexico. More than thirty kinds of fatty acids were detected in both samples. These fatty acids are maximized at C16. There is a clear even-over-odd carbon number predominance in carbon number range. The fatty acids are mainly composed of n-fatty acids, iso-/anteiso-fatty acids and terminally branched odd-numbered fatty acids (iso/anteiso). The low δ 13C values (−39.99‰ to.32.36‰) of n-C12:0, n-C13:0, i-C14:0and n-C14:0 suggest that they may relate to the chemosynthetic communities at seep sites. The unsaturated fatty acids n-C18:2 and C18:1Δ9 have the same δ 13C values, they may originate from theBeggiatoa/Thioploca. Unlike other fatty acids, the terminally branched fatty acids (iso/anteiso) show lowerδ 13C values (as low as −63.95‰) suggesting a possible relationship to sulfate reducing bacteria, which is common during anaerobic oxidation of methane at seep sites.

乙草胺的微生物降解及其对土壤磷脂脂肪酸特性的影响

通过监测不同培养条件下(灭菌、加选择抑菌剂、未灭菌)土壤中乙草胺残留数量和培养期间微生物标识物磷脂脂肪酸(PLFAs)含量的变化,探讨了以田间推荐量施用乙草胺时,不同微生物群落对乙草胺降解的相对贡献以及乙草胺对黑土微生物群落结构的影响.结果表明:乙草胺易于被微生物降解,其中,细菌对乙草胺的降解作用显著大于真菌,而真菌对乙草胺有更强的耐受能力.施入乙草胺后,各磷脂脂肪酸数量发生了显著变化,C14∶0、C16∶0和C18∶0所指示的土壤微生物量均有所下降;细菌PLFAs数量在培养初期显著降低,而后与对照的差异显著减小,表明细菌活性随着乙草胺的降解有所恢复;在施用乙草胺后的整个培养过程中,土壤真菌PLFAs数量始终低于对照,暗示着乙草胺对真菌的抑制可能是长期而不可逆的.

Structure and electrochemical characteristics of melted composite Ti0.10Zr0.15V0.35Cr0.10Ni0.30-LaNi5 hydrogen storage alloys

The structure and electrochemical characteristics of melted composite Ti0.10Zr0.15V0.35Cr0.10Ni0.30+x% LaNi5 (x=0, 1, 5 and 10) hydrogen storage alloys have been investigated systematically. XRD shows that the matrix phase structure of V-based solid solution phase with a BCC structure and C14 Laves phase with hexagonal structure is not changed after adding LaNi5 alloy. However, the amount of the secondary phase increases with increasing LaNi5 content. Field emission scanning electron microscopy-energy dispersive spectroscopy (FESEM-EDS) shows that the C14 Laves phase contains more Zr and the white lard phase has a composition close to (Zr, Ti)(V, Cr, Ni, La)(2).

Structures and electrochemical characteristics of Ti0.26Zr0.07V0.24Mn0.1Ni0.33Mox (x=0-0.1) hydrogen storage alloys

Microstructures and electrochemical properties of Ti0.26Zr0.07V0.21Mn0.1Ni0.33Mox (x=0,0.025,0.05,0.075, 0.10) electrode alloys have been investigated. The results of XRD analysis show that the alloys are mainly composed of V-based solid solution phase with body centered cubic (bcc) structure and C14 Laves phase with hexagonal structure. The addition of Mo element can imp ove the activation characteristics, maximum discharge capacity and cyclic durability for the electrode alloys

Crystallographic and electrochemical characteristics of Ti45Zr35Ni13Pd7 melt-spun alloys

Ti45Zr35Ni13Pd7 alloys are prepared by melt spinning at different cooling rates (v). The phase structure and electrochemical hydrogen storage performance are investigated. When U is 10 m/s, the alloy consists of icosahedral quasicrystalline phase (I-phase), C14 Laves phase and a little amorphous phase. When v increases to 20 or 30 m/s, a mixed structure of I-phase and amorphous phase is formed. Maximum discharge capacity of alloy electrode decreases from 156 mAh/g (v = 10 m/s) to 139 mAh/g (v = 30 m/s) with increasing v. High-rate discharge ability at the discharge current density of 240 mA/g decreases monotonically from 61.2% (v = 10 m/s) to 56.8% (v = 30 m/s).

Effect of AB(5) alloy on Ti0.10Zr0.15V0.35Cr0.10Ni0.30 hydrogen storage alloy

The structure and electrochemical characteristics of melted composite Ti0.10Zr0.15V0.35Cr0.10Ni0.30 + x% LaNi4Al0.4Mn0.3Co0.3 (x = 0, 1, 5) hydrogen storage alloys have been investigated systematically. XRD shows that though the main phase of the matrix alloy remains unchanged after LaNi4Al0.4Mn0.3Co0.3 alloy is added, a new specimen is formed. The amount of the new specimen increases with increasing x. SEM-EDS analysis indicates that the V-based solid solution phase is mainly composed of V, Cr and Ni; C14 Laves phase is mainly composed of Ni, Zr and V; the new specimen containing La is mainly composed of Zr, V and Ni. The electrochemical measurements suggest that the activation performance, the low temperature discharge ability, the high rate discharge ability and the cyclic stability of composite alloy electrodes increase greatly with the growth of x.

Structure and electrochemical characteristics of TiV1.1Mn0.9Nix (x=0.1-0.7) alloys

The structure and electrochemical properties of TiV1.1Mn0.9Nix (x = 0.1-0.7) solid solution electrode alloys have been investigated. It is found that these alloys mainly consist of a solid solution phase with body centered cubic (bcc) structure and a C14 Laves secondary phase. The solid solution alloys show easy activation behavior, high temperature dischargeability, high discharge capacity and favorable high-rate dischargeability as a negative electrode material in Ni-MH battery. The maximum discharge capacity is 502 mAh g(-1) at 303 K when x = 0.4. Electrochemical impedance spectroscopy (EIS) test shows that the charge-transfer resistance at the surface of the alloy electrodes decreases obviously with increasing Ni content.