~(12)C~(6+)离子辐照小鼠Lewis肿瘤的研究

研究了HIRFL提供的12C6+离子辐照C57BL/6J小鼠右后腿移植的Lewis肿瘤的生长延迟和碳离子辐照对Lewis肿瘤小鼠寿命的延长.结果表明,碳离子照射的小鼠肿瘤生长体积明显地小于对照的体积.在剂量相同、分次数辐照越多时,肿瘤生长就越缓慢,肿瘤抑制就越高.在辐照分次数相同时,不同剂量对受照肿瘤生长体积未产生差异.在4Gy×3,8Gy×3和12Gy×2组3种辐照剂量下,小鼠寿命的P值小于0.05;可知小鼠的寿命延长具有统计学意义.

Reactive compatibilization of LLDPE/PS blends with a new type of Lewis acid as catalyst

The reactive compatibilization of LLDPE/PS (50/50 wt%) was achieved by Friedel-Crafts alkylation reaction with a combined Lewis acids (Me3SiCl and InCl3 center dot 4H(2)O) as catalyst. The graft copolymer at the interface was characterized by Fourier transform infrared spectroscopy and the morphology of the blends was analysized by scanning electron microscopy. It was found that the combined Lewis acids had catalytic effect on Friedel-Crafts alkylation reaction between LLDPE and PS, and the catalytic effect was maximal when the molar ratio of InCl3 center dot 4H(2)O to Me3SiCl was 1:5. The graft copolymer LLDPE-g-PS was formed via the F-C reaction and worked as a tailor-made compatibilizer to reduce the interfacial tension. The mechanical properties of reactive blend with combined Lewis acids as catalyst was notably improved compared to that of physical LLDPE/PS blend and serious degradation had been decreased compared to the reactive blend system with AlCl3 as catalyst; we interpreted the above results in term of acidity of combined Lewis acids.

Alternating copolymerization of carbon dioxide and propylene oxide catalyzed by (R,R)-SalenCo(III)-(2,4-dinitrophenoxy) and Lewis-basic cocatalyst

A binary catalyst system of a chiral (R,R)-SalenCo(III)(2,4-dinitrophenoxy) (salen = N,N-bis(3,5-di-tert-butylsalicylidene)-1,2-diphenylethylenediimine) in conjunction with (4-dimethylamino)pyridine (DMAP) was developed to generate the copolymerization of carbon dioxide (CO2) and racemic propylene oxide (rac-PO). The influence of the molar ratio of catalyst components, the operating temperature, and reaction pressure on the yield as well as the molecular weight of polycarbonate were systematically investigated. High yield of turnover frequency (TOF) 501.2 h(-1) and high molecular weight of 70,400 were achieved at an appropriate combination of all variables. The structures of as-prepared products were characterized by the IR, H-1 NMR, C-13 NMR measurements. The linear carbonate linkage, highly regionselectivity and almost 100% carbonate content of the resulting polycarbonate were obtained with the help of these effective catalyst systems under facile conditions.

Nonequilibrium microstructures and their evolution in a Fe-Cr-W-Ni-C laser clad coating

The laser-solidified microstructural and compositional characterization and phase evolution during tempering at 963 K were investigated using an analytical transmission electron microscope with energy dispersive X-ray analysis. The cladded alloy, a powder mixture of Fe, Cr, W, Ni, and C with a weight ratio of 10:5:1:1:1, was processed with a 3 kW continuous wave CO2 laser. The processing parameters were 16 mm/s beam scanning speed, 3 mm beam diameter. 2 kW laser power, and 0.3 g/s feed rate. The coating was metallurgically bonded to the substrate, with a maximum thickness of 730 mu m, a microhardness of about 860 Hv and a volumetric dilution ratio of about 6%. Microanalyses revealed that the cladded coating possessed the hypoeutectic microstructure comprising the primary dendritic gamma-austenite and interdendritic eutectic consisted of gamma-austenite and M7C3 carbide. The gamma-austenite was a non-equilibrium phase with extended solid solution of alloying elements and a great deal of defect structures, i.e. a high density of dislocations, twins, and stacking faults existed in gamma phase. During high temperature aging, in situ carbide transformation occurred of M7C3 to M23C6 and M6C. The precipitation of M23C6, MC and M2C carbides from austenite was also observed.

铁基抗高温磨损激光熔覆涂层强韧设计和研究II:Fe-Cr-C-W-Ni激光熔覆层的微观组织及性能

本文以对热工模具进行失效分析的基础上，利用激光熔覆技术，在５ＣｒＭｎＭｏ基础上设计并制备强韧兼备的抗高温磨损涂层。

裂纹顶端位错的运动和小范围屈服的K_(Ⅱc)

本文从裂纹顶端位错运动的简化模型估计形成塑性区所消耗的功;从而计算临界裂纹扩展力。由于Ⅰ型加载和Ⅱ型加载的应力状态有所不同,裂纹顶端塑性功耗也会不一样。基于上述思想,考虑了小范围屈服的K_(Ⅰc)和K_(Ⅱc)的关系,得出K(Ⅱc)>K(Ⅰc)的结论,符合实验结果;并就K(Ⅱc)/K(Ⅰc)的比值与材料性能和温度的关系作了讨论。

铁基抗高温磨损激光熔覆涂层强韧设计和研究 Ⅱ:Fe-Cr-C-W-Ni激光熔覆层的微观组织及性能

利用ＯＭ、ＳＥＭ、ＴＥＭ研究了Ｆｅ－Ｃｒ－Ｃ－Ｗ－Ｎｉ激光熔覆涂层熔覆态及其高温时效态的微观组织结构。结果表明激光熔覆层组织细小，具有强韧两相组成（奥氏体和Ｍ_７Ｃ_３碳化物）的微观结构特征，高温时效处理组织中有Ｍ_（２３）Ｃ_６、Ｍ_６Ｃ、Ｍ_２Ｃ等新碳化物形成。显微硬度和冲击磨损实验证实了激光熔覆态和峰值时效态熔覆层均具有良好的力学性能。

钾离子通道Kir2.1/C-末端功能区的分子动力学模拟

<正>内向整流型钾离子通道(Kir,inwardlyrectifyingpotassium)在细胞激活、细胞内外钾离子K~+的动态平衡、胰岛素分泌等细胞生理过程中起重要作用。而细胞内各种不同因素和第二信使对Kir的调控则是实现其不同生理功能的途径。已有实验结果表明,4,5二磷酸磷脂酰肌醇(PIP2,phosphatidylinositol4,5-bisphosphate)与Kir相互作用的强弱决定了Kir对各种调控因素的响应程度。根据Kir2.1与Kir3.1胞内C-末端X-ray

湍流研究最近半世纪的一些发展

<正>内容一、绪言(Ⅰ)研究湍流的意义(Ⅱ)国外开展湍流研究的情况二、湍流理论的进展(Ⅰ)先把流体动力学方程组平均的理论(a)1950年以前发展情况简述(1)Reynolds方程和混合长度理论(2)各向同性湍流的统计理论(3)具有剪应力的普通湍流理论(b)最近的剪切湍流的半经验理论(c)最近的湍流统计理论(1)E.Hopf理论(2)R.H.Kraichnan直接相互作用理论(8)Lewis等人的分子运动理论(4)Meecham理论。(5)S.Grossmann重正化群法(8)陈善谟统计动力学重复级串法

Visual C++ 6.0学习教程

c="http://img3.douban.com/mpic/s1281493.jpg" border="0" alt="" hspace="8" width="102" height="144" align="left" />MicrosoftVisualC���十6.0作为Microsoft Visual Studio的重要组成部分，包含了迄今为止功能最为强大的基于Windows的应用框架，在同类产品中处于领先地位。VisualC���十6.0是Microsoft迄今为止最全面、最完善的程序开发工具，为了适应各种编程风格，该软件提供了各种各样的辅助工具，在发挥编程能力和提高灵活性方面达到了空前的水平。与以往VisualC���十的各种版本相比较，VisualC���十6.0在编程环境、程序语言技术等方面做了许多改进，从而使VisualC���十更加适合专业程序员快速进行应用程序的开发。

本书内容丰富、图文并茂，是一本适合各种读者学习VisualC���十6.0的优秀参考书。

目 录
第一章 VisualC���十6.0简介及安装
1.1VisualC���十6.0新特性
1.2viSualC���十6.0开发环境简介
1.3如何学习使用VisualC���十6.0
1.4VisualC���十6.0的安装
第二章 走进C���十的世界
2.1类和对象的简介
2.2继承和多态性――一个具体的例子
2.3内嵌对象
2.4在栈中申请对象
2.5全程对象的申请
2.6对象之间的相互关系――指针数据成员
2.7this指针的使用
2.8对指针的引用
2.9友元类和友元函数
2.10静态类成员
2.11重载运算符
2.12从代码中分离出类定义
2.13匈牙利表示法
第三章 VisualC���十6.0的编程环境
3.1VisualC���十6.0主窗口
3.2VisualC���十6.0工具栏
3.3VisualC���十6.0菜单栏
3.4项目与项目工作区
3.5资源与资源编辑器
第四章 编一个最简单的VC���十程序
4.1什么是AppWizard？
4.2迎接你的第一个AppWizard程序
4.3“Iamaprogrammer.”在哪儿？
第五章 程序框架入门
5.1一个简化过的程序框架
5.2WinMain（）：第一个动作
5.3登记窗口类
5.4创建一个窗口
5.5显示窗口
5.6显示出那条消息
5.7窗口类与窗口对象
第六章 消息循环
6.1在消息循环中兜圈子
6.2对事件做出响应：WindowFun（）
6.3响应不同的消息
6.4现在你还跟得上吗？
6.5设备界面进行交互
第七章 精通程序框架
7.1WinMain（）函数在哪儿？
7.2应用程序框架和源文件
7.3工具条、状态条和打印等选项
7.4程序的控制流程
第八章 使用classWizard编程
8.1使用ClassWizard添加消息处理函数
8.2classWizard功能介绍
8.3传送鼠标消息
8.4保存鼠标绘图的信息
第九章 视图与文档
9.1Document－View模式
9.2从视图中分离出文档
9.3保存文档
9.4再访MyProg2.cpp
第十章 对象连接与嵌入（OLE）及其自动化
10.1公共对象模式（COM）
10.2类厂（classfactory）
10.3OLE自动化
10.4IDispatch接口
第十一章 动态连接库（DLLs）
11.1为什么使用DLL
11.2传统的DLL
11.3MFC���DLL
11.4MyProg4A――编写自己的类库扩展DLL
11.5MyProg4B――使用MFC���扩展DLL
11.6资源访问
第十二章 图形设备接口
12.1设备环境类
12.2GDI对象
12.3Windows的颜色映射
12.4映射方式
12.5字体
12.6MyProg3例程序
12.7MyProg3B程序
12.8MyPr0g3C���程序――使用CScrollView
第十三章 对话框
13.1在状态条上显示对话控件的帮助信息
13.2利用Fi1eOpen通用对话框打开多个文件
13.3定制通用文件对话框
13.4扩展和缩减一个对话框
13.5显示一个模式或无模式对话框
13.6编写定制的DDX/DDV例程
第十四章 剖析工具Spy十＋
14.1窗体
14.2消息
14.3进程与线程
第十五章 代码调试
15.1TRACE
15.2调试框架
15.3自我诊断
15.4调试代码的作用
15.5用Dump（）显示对象的信息
15.6检查内存

Development And Characterization Of Composite Ni-Cr-C-Caf2 Laser Cladding On Gamma-Tial Intermetallic Alloy

A process of laser cladding Ni-CF-C-CaF2 mixed powders to form a multifunctional composite coatingd on gamma-TiAl substrate was carried out. The microstructure of the coating was examined using XRD, SEM and EDS. The coating has a unique microstructure consisting of primary dendrite or short-stick TiC and block Al4C3 carbides reinforcement as well as fine isolated spherical CaF2 solid lubrication particles uniformly dispersed in the NiCrAlTi (gamma) matrix. The average microhardness of the composite coatings is approximately HV 650 and it is 2-factor greater than that of the TiAl substrate. (C) 2008 Elsevier B.V. All rights reserved.

Improved fluorescence from Tm3+/Er3+/Ce3+ triply doped bismuth-silicate glasses for S+C-bands amplifiers

Fluorescence of Tm3+/Er3+ codoped bismuth-silica (BS) glasses and the sensitization of Ce3+ are investigated. It shows that Ce3+ codoping with Tm3+/Er3+ in BS glasses results in a quenching of Tm3+ ion emission from F-3(4) to the H-3(6) level. Consequently, the 1.47 mu m emission occurs after the population inversion between the H-3(4) and F-3(4) levels. Furthermore, the codoped glasses show the broad emission spectra over the whole S and C bands with full-width at half-maximum (FWHM) up to about 119nm, as it combines 1.55 mu m emission band of Er3+ with 1.47 mu m emission band of Tm3+ under 800nm excitation.