Analysis of coupled microcircular resonators coupled to a bus waveguide with high output efficiency

Coupled microcircular resonators tangentially coupled to a bus waveguide, which is between the resonators, are numerically investigated by the finite-difference time-domain technique. For symmetrically coupled microcircular resonators with refractive index of 3.2, radius of 2 mu m, and width of the bus waveguide of 0.4 mu m, a mode Q factor of the order of 105 is obtained for a mode at the frequency of 243 THz. An output coupling efficiency of as high as 0.99 is calculated for a mode with a Q factor ranging from 10(3) to 10(4). The mode Q factor is 2 orders larger than that of the modes confined in a single circular resonator tangentially coupled to the same bus waveguide. Furthermore, the high Q traveling modes in the coupled microcircular resonators are suitable for optical single processing.

Kondo effect in a triangular triple quantum dots ring with three terminals

For a triangular triple quantum dots (TTQDs) ring with three terminals, when lowering one of the dot-lead coupling to realize the left-right (L-R) reflection symmetry coupling, the internal C-upsilon of the TTQDs is well preserved in the absence of many-body effect for the symmetric distribution of the dot-lead coupling on the molecular orbits. In the presence of Kondo effect, the decrement of one of the dot-lead couplings suppresses the inter-dot hopping. This happens especially for the coupled quantum dot (QD), which decouples with the other two ones gradually to form a localized state near the Fermi level As a result, the internal dynamic symmetry of the TTQDs ring is reduced to L-R reflection symmetry, and simultaneously, the linear conductance is lifted for the new forming molecular orbit near the Fermi level

机动车检测系统中总线设备网络化改造的实现

实现了一种机动车检测系统中总线设备网络化改造的可行方案。利用SST89E564RD单片机与网卡芯片设计的主要接口模块，既为检测设备网络化提供了网关服务，也实现了在线仿真和下载的功能。

基于CAN总线的海洋平台数据采集系统

介绍了一种基于CAN总线的数据采集系统,讨论了该系统应用在海洋平台这类特殊环境下的系统结构和现场节点的具体设计。系统由上位监控机、CAN网卡、智能网桥节点和智能采集节点组成,采用总线方式的网络拓扑结构,构成一种基于CAN总线的分布式监控采集系统。智能节点以AT89S52单片机为微控制器,使用SJA1000作为CAN控制器,可构成上行和下行网络通信波特率分别为500kbps和250kbps的CAN网络。详细分析了该系统的硬件组成,应用层协议和通讯流程。系统已应用于某海上平台的环境载荷的监测,提高了数据传输的可靠性,为平台的安全运行和结构的优化设计提供了科学依据。

Quantum computation based on a quantum switch in cavity QED

A feasible scheme for constructing quantum logic gates is proposed on the basis of quantum switches in cavity QED. It is shown that the light field which is fed into the cavity due to the passage of an atom in a certain state can be used to manipulate the conditioned quantum logical gate. In our scheme, the quantum information is encoded in the states of Rydberg atoms and the cavity mode is not used as logical qubits or as a communicating "bus"; thus, the effect of atomic spontaneous emission can be neglected and the strict requirements for the cavity can be relaxed.

自由空间相干光通信技术及发展

对比了相干探测和直接探测，以及自由空间相干光通信和光纤相干通信，对相干自由空间激光通信系统的特点和关键技术进行了讨论，回顾了近年来国外在自由空间相干光通信领域内开展的有关研究计划。最后对相干光通信技术的应用前景进行了展望。

卫星激光通信Ⅰ链路和终端技术

卫星激光通信具有巨大的潜在应用价值, 国际上已实现高码率、小型化、轻量化和低功耗激光通信终端, 全文的第一部分即“链路和终端技术”综述了卫星激光通信的国外进展, 介绍了终端的关键技术, 讨论了终端设计思想。第二部分(另文)将讨论和介绍卫星激光通信终端地面检测和验证技术。

卫星激光通信Ⅱ地面检测和验证技术

星间激光通信终端的主要技术指标和运行性能必须事先在地面实验室条件下进行模拟检验, 因此在研制卫星激光通信终端的同时必须发展相应的系统性检测和验证平台, 主要包括激光通信性能检验、光跟瞄性能检验和光束质量检验。本文综述了卫星激光通信终端检验技术的国外进展, 介绍了我们全物理模拟的地面检测验证思路和方法。

自由空间激光远距离传输的地面模拟研究

根据透镜的傅里叶变换性质，提出了采用光学傅里叶变换加级联光学成像放大并结合有限口径接收的方法来实现自由空间激光光束远距离传输的实验室模拟。由此原理设计了自由空间激光远距离传输模拟装置，该装置主要由大口径、长焦距的傅里叶变换平行光管和三级成像放大镜所组成，最大等效传输距离达2.4×10^5km，可用于星间激光通信终端综合通信性能的评估，在设定的误码率下测量终端可能的通信距离，或者在设定的作用通信距离下检测通信的误码率。

卫星激光通信终端光跟踪检测的数理基础

卫星激光通信光束的传播在空间属于远场衍射，而在地面光学跟踪检验中属于近场衍射。采用菲涅耳衍射理论研究了远场衍射和近场衍射对于产生光学跟踪位置误差信号的本质上的差别并且分析了等效条件，证明了近场检验中采用卫星相对角度运动轨迹的光束扫描可以准确模拟远场相对运动，同时也得到了光斑特性和卫星抖动模拟的分析。澄清了卫星激光通信终端光学跟踪性能检验中的基本概念，具有实际指导意义。

Electrochemical fabrication and electronic behavior of polypyrrole nano-fiber array devices

Electrochemically active Polypyrrole (PPy) nano-fiber array device was fabricated via electrochemical deposition method using aluminum anodic oxide (AAO) membrane as template. After alkaline treatment electrochemically active PPy nano-fiber lost electrochemical activity, and became electrochemically inactive PPy. The electronic properties of PPy nano-fiber array devices were measured by means of a simple method. It was found that for an indium-tin oxide/electrochemically inactive PPy nano-fiber device, the conductivity of nano-fiber increased with the increase of voltage applied on the two terminals of nano-fiber. The electrochemical inactive PPy nano-fiber might be used as a nano-fiber switching diode. Both Au/electrochemically active PPy and Au/electrochemically inactive PPy nano-fiber devices demonstrate rectifying behavior, and might have been used for further application as nano-rectifiers. (c) 2005 Elsevier B.V. All tights reserved.

Design, fabrication and characterization of a high-performance microring resonator in silicon-on-insulator

A high-performance microring resonator in a silicon-on-insulator rib waveguide is realized by using the electron beam lithography followed by inductively coupled plasma etching. The design and the experimental realization of this device are presented in detail. In addition to improving relevant processes to minimize propagation loss, the coupling efficiency between the ring and the bus is carefully chosen to approach a critical coupling for high performance operating. We have measured a quality factor of 21,200 and an extinction ratio of 12.5dB at a resonant wavelength of 1549.32nm. Meanwhile, a low propagation loss of 0.89dB/mm in a curved waveguide with a bending radius of 40 mu m is demonstrated as well.

Violet/blue emission from hydrogenated amorphous carbon films deposited from energetic CH3+ ions and ion bombardment

Considering the complexity of the general plasma techniques, pure single CH3+ ion beams were selected for the deposition of hydrogenated amorphous (a) carbon films with various ion energies and temperatures. Photoluminescence (PL) measurements have been performed on the films and violet/blue emission has been observed. The violet/blue emission is attributed to the small size distribution of sp(2) clusters and is related to the intrinsic properties of CH3 terminals, which lead to a very high barrier for the photoexcited electrons. Ion bombardment plays an important role in the PL behavior. This would provide further insight into the growth dynamics of a-C:H films. (C) 2002 American Institute of Physics.

A power-saving scheme for IEEE 802.11 Ad hoc networks

In the Wireless Local Area Networks (WLANs), the terminals are often powered by battery, so the power-saving performance of the wireless network card is a very important issue. For IEEE 802.11 Ad hoc networks, a power-saving scheme is presented in Medium Access Control (MAC) layer to reduce the power consumption by allowing the nodes enter into the sleep mode, but the scheme is based on Time-Drive Scheme (TDS) whose power-saving efficiency becomes lower and lower with the network load increasing. This paper presented a novel energy-saving mechanism, called as Hybrid-Drive Scheme (HDS), which introduces into a Message.-Drive Scheme (MDS) and combines MDS with the conventional TDS. The MDS, could obtain high efficiency when the load is heavy; meanwhile the TDS has high efficiency when the network load is small. The analysis shows that the proposed HDS could obtain high energy-efficiency whether the network load is light or heavy and have higher energy-saving efficiency than conventional scheme in the IEEE 802.11 standard.

基于OSGi的服务协作总线的设计与实现

网络技术的快速发展和多变的业务需求使得软件功能日益复杂、规模日益庞大。面向服务架构作为一种新的计算范型，利用服务作为基本的构造单元，支持异构环境下分布式应用的快速、低成本开发。但是现有的面向服务架构实现方案在服务动态部署、动态生命周期管理，以及模块化方面均存在不足。OSGi（Open Service Gateway Initiative）提供了一种面向服务、基于组件的软件框架，易于构建模块化、动态可扩展的软件系统，在服务动态部署、生命周期管理，以及模块化方面具有优势。 论文首先分析了面向服务架构和OSGi技术的特点，以及相互之间的互补因素，在此基础上建立了一个服务协作总线概念架构，支持服务的动态部署、动态生命周期管理和透明协作。在该概念架构的基础上，设计了一种服务描述模型，以此为基础实现透明的OSGi服务发布与发现；扩展了OSGi服务部署和访问机制，实现分布透明的OSGi服务访问；通过声明式远程服务组件模型，实现了服务动态生命周期管理。在这些基础上，论文给出了服务协作总线系统OnceSCB的设计与实现。并通过应用案例和实验对OnceSCB的功能和非功能方面进行了评估。该服务协作总线实现远程服务的透明化访问以及远程服务与本地OSGi服务统一管理，提供透明的服务协作，形成一个基于服务协作的动态服务计算生态环境，为服务计算环境下服务开发、部署、管理提供支持。