助推-远程滑翔三维飞行的热流峰值分析

为简便分析助推-远程滑翔弹道三维情况下的热流特性,基于远程滑翔三维飞行动力学模型和热力学基本公式,根据助推-远程滑翔弹道的两类飞行弹道（平衡滑翔弹道和跳跃滑翔弹道）的特点,推导建立了两类弹道三维情况下平均热流和驻点热流计算的解析公式。详尽分析了再入角、再入速度、升阻比、滚转角和翼载荷对两类弹道热流峰值的影响规律。由分析可知在远程滑翔三维飞行情况下,滚转角对其热流峰值有显著影响;升阻比大于1,滚转角控制在60度以内,其热流峰值能够得到有效降低。

A scheme for multiple sequences alignment optimization-an improvement based on family representative mechanics features

As a basic tool of modern biology, sequence alignment can provide us useful information in fold, function, and active site of protein. For many cases, the increased quality of sequence alignment means a better performance. The motivation of present work is to increase ability of the existing scoring scheme/algorithm by considering residue–residue correlations better. Based on a coarse-grained approach, the hydrophobic force between each pair of residues is written out from protein sequence. It results in the construction of an intramolecular hydrophobic force network that describes the whole residue–residue interactions of each protein molecule, and characterizes protein's biological properties in the hydrophobic aspect. A former work has suggested that such network can characterize the top weighted feature regarding hydrophobicity. Moreover, for each homologous protein of a family, the corresponding network shares some common and representative family characters that eventually govern the conservation of biological properties during protein evolution. In present work, we score such family representative characters of a protein by the deviation of its intramolecular hydrophobic force network from that of background. Such score can assist the existing scoring schemes/algorithms, and boost up the ability of multiple sequences alignment, e.g. achieving a prominent increase (50%) in searching the structurally alike residue segments at a low identity level. As the theoretical basis is different, the present scheme can assist most existing algorithms, and improve their efficiency remarkably.

Effects of tetrabrominated diphenyl ether and hexabromocyclododecanes in single and complex exposure to hepatoma HepG2 cells

This study was designed to determine cytotoxic effects of PBDE-47 and HBCDs individually or with a mixture of both compounds exposure to Hep G2 cells. The results showed PBDE-47 and HBCDs induced increase of nitric oxide synthase (NOS) activity, release of NO. dissipation of mitochondria membrane potential and cell apoptosis. Exposure to HBCDs induced ROS formation. Moreover, preincubation with PTIO (NO scavanger) and N-acetylcysteine (ROS scavanger) partially reversed cytotoxic effects of these compounds. The possible mechanism is that PBDE-47 and HBCDs could boost generation of NO and/or ROS, impact mitochondria, and result in start-ups of apoptosis program. Cells exposed to mixture of both compounds and each of them showed non-apoptotic rate significant difference, but the combination of them caused more adverse effects on cells. These results Suggest that PBDE-47 and HBCDs in single and complex exposure have the cytotoxic activity of anti-proliferation and induction of apoptosis in tumor cells in vitro. (C) 2008 Elsevier B.V. All rights reserved.

Structural and optical investigation of Mn-doped ZnS nanocrystals

Using a solution-based chemical method, we have prepared ZnS nanocrystals doped with high concentration of Mn2+. The X-ray diffraction analysis confirmed a zinc blende structure. The average size was about 3 nm. Photoluminescence spectrum showed room temperature emission in the visible spectrum, which consisted of the defect-related emission and the T-4(1)-(6)A(1) emission of Mn2+ ions. Compared with the undoped sample, the luminescence of the ZnS:Mn sample is enhanced by more than an order of magnitude, which indicated that the Mn2+ ions can efficiently boost the luminescence of ZnS nanocrystals.

一种无需ADC的变步长反馈DC-DC转换器数控方式

数控DC-DC变换器由于其自身的特点，易于与数字系统进行单片集成。DC-DC的数字控制算法有很多种，其中比较复杂的算法（如PID）需要在片内集成ADC，增加了设计难度。较为简单的控制方案只使用单一的比较器作为反馈输入部件，但动态性能较差。本文在已有的单比较器恒定步长反馈数控Buck转换器的基础上，提出了一类变步长反馈的方案。由于仍使用单比较器或窗口比较器，它的结构简单且易于集成。它借鉴了对分搜索的思路，能根据输出电压反馈的结果动态地改变占空比的变化步长，从而明显地提高了原有恒定步长反馈数控变换器的动态性能。

组合白腐真菌预处理木质纤维素原料的研究

木质纤维素原料种类多、分布广、数量巨大，通过燃料乙醇生产技术、厌氧沼气发酵技术将其转化成乙醇、沼气等二次能源，一定程度上可以缓解化石能源的不断消耗所带来的能源危机，也解决了农林废弃物引起的环境污染问题。其中以木质纤维素原料生产燃料乙醇，还可以避免以淀粉类和糖类原料生产燃料乙醇时带来的“与人争粮”等一系列问题。因此具有重要的经济效益、环境效益和社会效益。 然而，木质纤维素原料结构致密，木质素包裹在纤维素、半纤维素外围，导致其很难被降解利用，必须进行适当的预处理，去除木质素，打破原有的致密结构，利于原料的后续利用。因此，预处理成为木质纤维素原料能源化利用的关键。而目前预处理环节的费用过于昂贵，于是寻找一种高效、低成本的预处理方法是当今研究的热点。 本论文采用组合白腐真菌对木质纤维素原料进行生物预处理研究，与其他物理化学法相比，该法有着专一性较强、反应温和、不造成环境污染、成本低等优势。白腐真菌主要通过分泌木质素降解酶对木质素进行降解，从而破坏原料的致密结构，提高后续利用效率。所以木质素降解酶酶活的高低是影响原料预处理效果的一个关键因素。于是本论文首先通过将白腐真菌进行组合的方式提高木质素降解酶（漆酶，Lac）酶活；接着对组合菌的菌株相互作用机理进行研究，阐明组合菌Lac 酶活提高的原因，为菌株组合提高Lac 酶活这种方法的应用提供理论依据，同时也为后续组合白腐真菌预处理木质纤维素原料提供指导；进一步采用固态发酵和木质素降解酶两种方式对木质纤维素原料进行预处理研究，最大化去除木质素成分，破坏原料的致密结构；最终对预处理后原料的酶解糖化进行初步研究，为原料后续的能源化应用奠定基础。具体研究结果如下： （1） 以实验室保存的三株主要分泌Lac 的白腐真菌为出发菌株，筛选得到一组Lac 酶活明显提高的组合菌55+m-6，其中菌株55 为Trametes trogii sp.，m-6 为Trametes versicolor sp.，组合后Lac 酶活较单菌株分别提高24.13倍和4.07 倍。组合菌的最适产酶条件为pH 6.5、C/N 16:1、Tween 80 添加量为0.01%，在该条件下组合菌的Lac 酶活峰值比未优化时提高4.11倍。 （2） 对组合菌55+m-6 菌株间相互作用机理进行研究，发现菌株之间不存在抑制作用；平板培养时，菌丝交界处Lac 酶活最高并分泌棕色色素；液体培养时，菌株m-6 对组合后Lac 酶活的提高起着更为重要的作用：菌株m-6的菌块、过滤灭菌胞外物以及高温灭菌胞外物均能明显刺激菌株55 的Lac产生；菌株55、m-6 进行组合后，同工酶种类未发生增减，但有三种Lac同工酶浓度有所提高；对菌株胞外物进行薄层层析和质谱分析，结果表明组合前后菌株胞外物中各物质在浓度上存在较大的变化。推测组合菌Lac酶活的明显提高，主要是由于菌株m-6 胞外物中的一些物质能刺激菌株55 分泌大量Lac 进行代谢，且这些刺激物质并非菌株m-6 特有，菌株55自身也可以代谢生成，但是适当的浓度才能刺激Lac 的大量分泌。 （3） 将组合菌55+m-6 用于固态发酵预处理木质纤维素原料，发现其对玉米秆的降解程度最大，在粉碎度40 目、含水率65%的最优处理条件下，处理至第15d，秸秆失重率为41.24%，其中木质素、纤维素、半纤维素均有降解，且Lac 和纤维素酶（CMC）酶活以及还原糖量均达到峰值。 （4） 对玉米秆进行木质素降解酶预处理，发现Lac/1-羟基苯并三唑（HBT）系统对玉米秆木质素的降解效果最好，在最优处理条件时，即HBT 用量0.2%、处理时间1d、Lac 用量50U/g，木质素降解率可达12.60%。预处理后玉米秆的致密结构被破坏，比表面积增大，利于后续酶与纤维素、半纤维素成分的结合。 （5） 对预处理后的玉米秆进行酶解糖化，其中组合菌固态发酵预处理后玉米秆的糖化率比对照高4.33 倍；Lac/HBT 系统预处理后玉米秆的糖化率比对照高2.99％，糖化液中主要含有木糖、葡萄糖两种单糖。 There are many kinds and large quantities of lignocellulosic biomass widely distributed on the earth. They can be converted into secondary energy such as fuel ethanol, biogas, et al., which can relieve the energy crisis caused by consumption of fossil energy resources and solve the problem of environmental pollution caused by agriculture and forestry waste. Meanwhile, the production of fuel ethanol from lignocellulosic biomass can ensure food supply to human kind instead of starch- and sugar-containing raw materials. So the energy conversion of lignocellulosic biomass contributes considerable economic, environment and social benefits. However, lignocellulosic biomass has the compact structure, in which lignin surrounds cellulose and hemicellulose, so it must be pretreated before energy usage and pretreatment is one of the most critical steps in the energy conversion of lignocellulosic biomass. At present, the cost of pretreatment is too expensive, so looking for an efficient and low-cost pre-treatment method is one of recent research hot spots. In this research, combined white rot fungi pretreatment method was used, which had some advantages in low cost, high specificity, mild reacting conditions and friendly environmental effects compared with the other physical and chemical methods. White rot fungi secrete lignin degrading enzymes to degrade the content of lignin and damage the contact structure of lignocellulosic biomass, so the activity of the lignin degrading enzymes is the key factor to the degradation effect of raw materials. Firstly, the combined fungi with high laccase activity were screened; secondly, the interaction mechanism between strains was studied, and the cause of higher laccase activity after strains combination was also preliminary clarified; under the guidance of the mechanism, lignocellulosic biomass was pretreated by the combined fungi; lastly, the enzymatic hydrolysis of pretreated lignocellulosic biomass was also preliminary studied; all of the researches could lay the foundation for the energy application of lignocellulosic biomass. The specific research results were as follows: (1) The combined fungi 55+m-6 with significant higher laccase activity were screened from the three white rot fungi stored in our lab which mainly secreted laccase. Strain 55 and strain m-6 were Trametes trogii sp. and Trametes versicolor sp., respectively. The laccase activity of combined fungi was 24.13 and 4.07-fold than strain 55 and strain m-6, respectively. The optimized condition for laccase production of the combined fungi in liquid medium was pH 6.5, C/N 16:1 and Tween 80 0.01%. In this optimized condition, the laccase activity of combined fungi was 4.11-fold higher comparing with which in non-optimized medium. (2) The interaction mechanism between strain 55 and strain m-6 was further studied, and no inhibition effect was observed. Brown pigment was secreted on the junction of the two strains on the plate, where the highest laccase activity was detected. Strain m-6 was much important to boost laccase activity of combined fungi in liquid medium, and strain 55 was stimulated by fungal plug, filter sterilized extracellular substances and high temperature sterilized extracellular substances of strain m-6 to produce laccase. The types of laccase isozymes did not change after combining strain 55 and strain m-6, but the concentrations of three types increased. Mass Spectrometry and TLC analysis of extracellular substances of each strain showed that concentration of some substances considerably changed after strains were combined. It was supposed that the cause of higher laccase activity of combined fungi was mainly due to some extracellular substances of strain m-6 with the appropriate concentration which stimulated laccase secretion of strain 55 and generated not only by strain m-6 but also by strain 55. (3) Combined fungi 55+m-6 were used to lignocellulosic biomass pretreatment with the type of solid-state fermentation. The highest degree of degradation of corn straw was obtained, including the rate of weight loss was 41.24% and the lignin, cellulose and hemicellulose were degraded partially under the optimized condition of 40 mesh, 65% water content on 15th day. Laccase, CMCase activities and content of reducing sugar reached the maximum value on that day. (4) Lignin degrading enzymes from combined fungi 55+m-6 were used for corn straw pretreatment. The most remarkable degradation of lignin in corn straw with Lac/1-hydroxybenzotriazole (HBT) system was observed, and the 12.60% lignin degradation was obtained under the optimized condition of 0.2% HBT, 50 U/g laccase for 1 d. After pretreated by Lac/HBT, the tight structure of corn straw was demolished and specific surface area increased, which had advantages for accessible of enzyme to cellulose and hemicellulose. (5) The corn straws pretreated by combined fungi 55+m-6 with the type of solid-state fermentation and Lac/HBT were used for enzymatic hydrolysis, and the saccharification rates of each pretreatment type were 4.33 times and 2.99% higher than CK, respectively. The enzymatic hydrolysis liquid of corn straw pretreated by Lac/HBT mainly contained xylose and glucose.

H桥斩波电源的小信号数学模型及其数字化控制器的实现

概括了加速器H桥非隔离式电源的运行原理与特点,在简化运行方式基础上建立了理想状态下电源连续工作模式的数学模型,并给出了仿真分析结果,介绍了基于TMS320F2808MCU实现的数字化电源控制器结构。

Longitudinal scaling property of the charge balance function in Au plus Au collisions at root s(NN)=200 GeV

We present measurements of the charge balance function, from the charged particles, for diverse pseudorapidity and transverse momentum ranges in Au + Au collisions at root S-NN = 200 GeV using the STAR detector at RHIC. We observe that the balance function is boost-invariant within the pseudorapidity coverage vertical bar-1.3, 1.3 vertical bar. The balance function properly scaled by the width of the observed pseudorapidity window does not depend on the position or size of the pseudorapidity window. This scaling property also holds for particles in different transverse momentum ranges. In addition, we find that the width of the balance function decreases monotonically with increasing transverse momentum for all centrality classes. (c) 2010 Elsevier B.V. All rights reserved.

基于新技术的超导电源及失超保护装置研究与设计

超导磁铁以其能实现极高的磁场强度和较低的能量损耗的优势，正在迅速成为现代加速器系统中普遍采用的一项技术。为超导磁体提供励磁的超导电源也就成为了必需研究的课题。此外，与之相似的低压大电流电源也大量的应用于加速器系统中，服务于核物理研究工作。针对这类电源在加速器中的应用，本课题的主要挑战在于如何实现一种高效率和低纹波输出特性的电源。为此，本论文的作者采用了一种完全不同的拓扑结构“多路多相同步整流BUCK变换器”，来达到高效率和低纹波的目标。并尝试使用数字技术来实现控制单元。本论文首先详细介绍了“多路多相同步整流BUCK变换器”的拓扑，通过计算和推导介绍了这种拓扑是如何提高效率和减少纹波电流输出的。然后介绍了这种拓扑结构所必需解决的均流问题、其产生原因和解决办法：一种几乎无损的单路电流的测量方法，以及这种测量方法的原理和实现方法。之后介绍了整个电源的参数计算和PCB板设计的一些细节。最后详细介绍了用MCU实现的控制器的设计细节。作为超导电源必配的失超保护装置，它担负着在失超故障状态，将超导磁体内存储的能量在尽量短的时间内消耗在外部负载上，以用于实现保护超导磁体的功能。因此超导磁铁失超保护装置 的设计原则是：可靠性和经济性。本论文最后一部分详细介绍了按照这个目标设计的超导磁铁失超保护装置及其设计细节

高稳定度高压开关电源设计

本文分析了国内外开关电源的发展和现状，研究了高压开关电源的基本原理以及开关电源在电力直流操作电源系统中的应用。根据兰州重离子加速器的要求，设计了一种高稳定度高压开关电源。该系统在借鉴国外和已有的类似电源的基础上，通过采用新的元器件和新的电力电子技术设计而成。该系统以工GBT作为功率开关器件，构成BUCK开关变换器，采用脉宽调制（PWM）技术来控制输出电压的变化。系统中采用TL494、UC3637、ML57962等一系列集成电路，以实现实时采样电压反馈信号、PWM信号以及工GBT所需要的功率驱动信号。电路中采用斩波调压和逆变分开，各司其职的结构，保证了电路可靠、线性的调节；采用前馈电路进行补偿，确保系统能很好的抑制电网的中频扰动。通过MATLAB的计算仿真证明，这些措施都对对系统的性能起到了很好的作用。为了系统的安全可靠，还设计了软启动和过流保护电路。通过实验证明该系统能安全、可靠运行，达到了设计要求。

不同轮作施肥对土壤有机氮分解特征的影响

在各长期轮作施肥系统中,耕层土壤矿化培养过程的pH及剖面矿化势的变化,说明了长期不同的轮作和施肥方式引起土壤有机氮数量和性质的变化。pH变化具有一共同特征,在0~4 周,各处理间差异显著;而后期变化趋势趋于一致,向微碱性环境发展。各处理的剖面矿化势的变化反映了有机氮可矿化数量的改变。小麦连作施肥和苜蓿连作施肥均说明施用有机肥对土壤有机氮水平有较好的提高作用。粮豆轮作3 a对土壤供氮能力的提高作用大于粮饲轮作4 a和裸地处理。

Footwear for Gender Recognition

Conventionally, biometrics resources, such as face, gait silhouette, footprint, and pressure, have been utilized in gender recognition systems. However, the acquisition and processing time of these biometrics data makes the analysis difficult. This letter demonstrates for the first time how effective the footwear appearance is for gender recognition as a biometrics resource. A footwear database is also established with reprehensive shoes (footwears). Preliminary experimental results suggest that footwear appearance is a promising resource for gender recognition. Moreover, it also has the potential to be used jointly with other developed biometrics resources to boost performance.

Evaluation of Effects of Bivalent Cations on the Formation of Purine-rich Triple-Helix DNA by ESI-FT-MS

The GGA triplet repeats are widely dispersed throughout eukaryotic genomes. (GGA)n or (GGT)n oligonucleotides can interact with double-stranded DNA containing (GGA:CCT)n to form triple-stranded DNA. The effects of 8 divalent metal ions (3 alkaline-earth metals and 5 transition metals) on formation of these purine-rich triple-helix DNA were investigated by electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (ESI-FT-MS). In the absence of metal ions, no triplex but single-strand, duplex, and purine homodimer ions were observed in mass spectra. The triple-helix DNA complexes were observed only in the presence of certain divalent ions. The effects of different divalent cations on the formation of purine-rich triplexes were compared. Transition-metal ions, especially Co2+ and Ni2+, significantly boost the formation of triple-helix DNA, whereas alkaline-earth metal ions have no positive effects on triplex formation. In addition, Ba2+ is notably beneficial to the formation of homodimer instead of triplex.

Observations on the spawning behavior of artificially matured Japanese eels Anguilla japonica in captivity

Spawning behavior of artificially matured Japanese eels Anguillo japonica in captivity was investigated using a DVD Video image system. Following a routine hormone treatment technique for this fish, female eels were artificially matured by weekly intramuscular injections of salmon pituitary extracts (SPE) at a dosage of 40 mg kg(-1) BW for a total of 7-11 doses to induce ovarian maturation, while male eels received weekly intramuscular injections of human chorionic gonadotropin (HCG) at a dosage of 1000 IU kg(-1) BW for a total of 6-11 doses at 18 degrees C to induce testicular maturation in a separate aquarium. In this experiment, three pairs of such hormone-treated matured eels were acclimatized in seawater in 1.5 m(3) experimental aquaria with or without shelters at 20 degrees C for 24 h. Twenty four hours after the acclimatization terminated, the females received SPE injections to boost maturation and ovulation. Twenty four hours following these injections, the females received injections of HCG (1000 IU per fish, HCG injection) and 17 alpha-hydroxyprogesterone (2 mg per fish) to induce ovulation, while males were given HCG injections (1000 IU per fish, HCG injection) to induce spermiation. Video taping started after the 24 h acclimatization terminated and last for a total of 96 h. Before the HCG injections, both sexes were inactive, staying on the bottom or in shelters if available. Following these HCG injections, they became active and frequently left the bottom swimming in the water column. During the 24 h following HCG injections, activity accounted for 67% and 45% of the total activity in no shelter treatment for females and males, respectively, in comparison with 77% and 78% in shelter treatment. Activity was significantly more pronounced during this phase than during other phases for each sex in either shelter treatment. Egg release and sperm ejection occurred in the water column around the time eels' activity reached peaks. Eels either returned into the shelters or stayed motionlessly on the bottom of the aquaria after egg release and sperm ejection. Eight out of nine (89%) females in no shelter treatment spontaneously released eggs with a total of 11 batches 14-18 h following HCG injections, in contrast with four out of nine (44%) females releasing eggs for 4 batches 16-20 h in shelter treatment. Males arrived at activity peaks 11-13 h following HCG injections in no shelter treatment, 2-4 h ahead of the females (14-16 h), in comparison with 8-11 h in shelter treatment with 5-6 h ahead of the females (14-17 h). Courtship behavior indicative of spawning such as pairing, chasing and touching bodies was not observed in the eels in this study. However, on many occasions, eels of both sexes (male-female or female-female) were found to "cruise together" in water column for a short time period or frequently come together prior to releasing eggs and ejecting sperm, suggesting the possibility of group mating in artificially matured Japanese eels. (c) 2007 Elsevier B.V. All rights reserved.

空间对接缓冲试验台助推装置研究

设计了一种用于空间对接缓冲试验台的新型高动态响应助推力模拟装置。介绍了助推装置的机构组成和原理,计算了助推气动系统的响应时间,并分析了助推运动过程。研究表明:该助推装置的响应速度快、精度高,助推力方向实时通过模拟飞行器的质心,满足设计要求。