Induction of diploid gynogenesis in turbot Scophthalmus maximus with left-eyed flounder Paralichthys olivaceus sperm

Turbot Scophthalmus maximus exhibits sexually dimorphic growth, with females growing faster and reaching larger adult sizes than males. Thus, development of techniques for preferentially producing females is necessary to optimize production of these species. In this paper, gynogenetic diploids of turbot were induced by activating egg development with ultraviolet (UV)-irradiated left-eyed flounder Paralichthys olivaceus sperm combined with cold shock to prevent extrusion of the second polar body. The results of UV irradiation experiments showed that survival, motility, and duration of activity of P. olivaceus sperm generally decreased with increase in UV dose. The typical Hertwig's effect was observed after fertilized turbot eggs with UV-irradiated P. olivaceus sperm and the optimal UV dose for gynogenetic haploid production was 36,000 erg mm(-2). At 15 degrees C, appropriate timing of cold shock for retention of the second polar body in turbot eggs was at 6 min after fertilization. Results of different combinations of two shock temperatures (1 or 3 degrees C) and four shock durations (15, 25, 35 or 45 min) at 6 min after fertilization demonstrated that shock of 25 min at 1 degrees C gave the highest production of diploid gynogens (39.58% relative to its diploid control). The results of this study reveal that the use of UV-irradiated P. olivaceus sperm for activation of turbot eggs and cold shock for polar body retention is an effective method to produce gynogenetic offspring.

~(12)C与~(209)Bi反应中Au同位素的产额与Q_(gg)的关系；Q_(gg)-Yield Dependence of Au Isotopes in Interaction of 47 MeV/u ~(12)C With ~(209)Bi

用47MeV/u12C离子轰击天然铋靶,通过炮弹和靶核之间的核子转移反应产生Au同位素。使用放射化学方法从大量Bi和复杂反应产物中分离、纯化Au,并制备Au的γ射线测量源。使用HPGe探测器测量放射性Au同位素的γ活性。根据照射结束时Au同位素的活度和其他相关数据,确定每个Au同位素的产生截面。分析发现,缺中子Au同位素的产生截面与Qgg值之间不遵从指数依赖关系,这可用重离子碰撞中的次级过程加以解释。

47MeV/u~(12) C轰击~(197)Au和~(209)Bi引起的裂变关联测量

本论文的工作：利用两体裂变角关联技术，辅之以飞行时间测量，测定了47MeV/u的~(12)C轰击~(197)Au和~(209)Bi靶中心碰撞对应的线性动量转移（LMT），得到了关联裂片出射的共面歧离分布，同时还发现了关联角很小且共面歧离很大的裂变事件，并得到了其相对速度分布。从测到的LMT分布中，得到中心碰撞对应的最可几线性动量转移约占入射动量的65％，相应于单核子线性动量转移约为192MeV/c.A，进而还估算出了所形成热核的激发能上限。在对关联裂片出射的共面歧离效应研究中，发现了共面歧离宽度是热核激发能的较好量度之一。并给出了共面歧离宽度跟热核单核子激发能的经验关系；还用简化的裂片级联蒸发模型估算了蒸发中子、质子和α粒子的平均多重性

A delay model for noise-induced bi-directional switching

Many biological systems can switch between two distinct states. Once switched, the system remains stable for a period of time and may switch back to its original state. A gene network with bistability is usually required for the switching and stochastic effect in the gene expression may induce such switching. A typical bistable system allows one-directional switching, in which the switch from the low state to the high state or from the high state to the low state occurs under different conditions. It is usually difficult to enable bi-directional switching such that the two switches can occur under the same condition. Here, we present a model consisting of standard positive feedback loops and an extra negative feedback loop with a time delay to study its capability to produce bi-directional switching induced by noise. We find that the time delay in the negative feedback is critical for robust bi-directional switching and the length of delay affects its switching frequency.

Novel Bi-doped glasses for broadband optical amplification

Broadband infrared luminescence is observed in various Bi-doped oxide glasses prepared by conventional melting-quenching technique. The absorption spectrum of the Bi-doped germanium oxide glass consists of five broad peaks at below 370, 500, 700, 800 and 1000 nm. The fluorescence spectrum exhibits a broad peak at about 1300 nm with full width at half maximum (FWHM) of more than 300 nm when excited by an 808 nm laser diode. The fluorescence lifetime at room temperature decreases with increasing Bi2O3 concentration. Influence of the glass composition and melting atmosphere on the fluorescence lifetime and luminescent intensity is investigated. The mechanism of the broadband infrared luminescence is suggested. The product of stimulated emission cross-section and lifetime of the Bi-doped aluminophosphate glass is about 5.0 X 10(-24) cm(2) s. The glasses might be promising for applications in broadband optical fiber amplifiers and tunable lasers. (c) 2007 Elsevier B.V. All rights reserved.

Band crossing in isovalent semiconductor alloys with large size mismatch: First-principles calculations of the electronic structure of Bi and N incorporated GaAs

For large size- and chemical-mismatched isovalent semiconductor alloys, such as N and Bi substitution on As sites in GaAs, isovalent defect levels or defect bands are introduced. The evolution of the defect states as a function of the alloy concentration is usually described by the popular phenomenological band anticrossing (BAC) model. Using first-principles band-structure calculations we show that at the impurity limit the N-(Bi)-induced impurity level is above (below) the conduction- (valence-) band edge of GaAs. These trends reverse at high concentration, i.e., the conduction-band edge of GaAs1-xNx becomes an N-derived state and the valence-band edge of GaAs1-xBix becomes a Bi-derived state, as expected from their band characters. We show that this band crossing phenomenon cannot be described by the popular BAC model but can be naturally explained by a simple band broadening picture.

纯金属Bi中高能重离子辐照效应

利用高能重离子（Ｋｒ， Ｘｅ， Ｓｎ和Ｐb ）辐照处于 １６或 １００ Ｋ的低熔点纯金属 Ｂｉ，通过测量分析辐照引起的样品电阻率增量及其变化速率随辐照剂量的变化，研究了入射离子在Ｂｉ中引起的辐照损伤效应如辐照损伤效率及复杂缺陷的产生等．结果表明，强的电子能损可在纯金属Ｂｉ中引起附加缺陷的产生，从而使得辐照损伤效率＞１．电子能损值大时，入射离子在Ｂi中引起的辐照效应主要是电子能损效应．辐照温度和入射离子速度对辐照效应的强弱有一定的影响．

3D 异金属Bi(III)-Pr(III)配位聚合物的合成、晶体结构和热稳定性

在水溶液中合成了双金属配位聚合物({[(NO3)(H2O)3Pr(μ4-Hedta)Bi-(NO3)2].2H2O}2)n,并通过元素分析、红外光谱和X射线单晶衍射等手段进行了表征.该配合物为单斜晶系,P2(1)/n空间群,a=1.26831(18)nm,b=0.82189(12)nm,c=2.3755(3)nm,β=105.055(2)°,R=0.0429,V=2.3913(6)nm3,Z=4.Bi(Ⅲ)-Pr(Ⅲ)间通过配阴离子Hedta3-中4个羧基的桥联作用构建配合物的3D结构.TG-DSC结果表明,该配合物热分解经历脱水、配体分解以及盐分解过程,残余物为Bi-Pr-O的三元复合氧化物.

Morphology evolutions of organically modified montmorillonite/polyamide 12 nanocomposites

Organically modified montmorillonites (OMMTs) by octadecylammonium chloride with two adsorption levels were dispersed in polyamide 12 (PA12) matrices with two molecular weights for different melt mixing times in order to investigate morphology evolutions and factors influencing fabrication of PA12 nanocomposites. Different adsorption levels of the modifier in the OMMTs provide different environments for diffusion of polymer chains and different attractions between MMT layers. Wide-angle X-ray diffraction (WAXD), transmission electron microscope (TEM) and gas permeability were used to characterize morphologies of the nanocomposites. Both OMMTs can be exfoliated in the PA12 matrix with higher molecular weight, but only OMMT with lower adsorption level can be exfoliated in the PA12 matrix with lower molecular weight. It was attributed to the differences in the levels of shear stress and molecular diffusion in the nanocomposites. The exfoliation of OMMT platelets results from a combination of molecular diffusion and shear. After intercalation of PA12 into interlayer of OMMT in the initial period of mixing, further dispersion of OMMTs in PA12 matrices is controlled by a slippage process of MMT layers during fabricating PA12 nanocomposites with exfoliated structure.

Charge carrier mobility and electroluminescence in a green-emitting alternating block copolymer with a methoxy Bi-substituted chromophore

We determine the mobility of positive and negative charge carriers in a soluble green-emitting alternating block copolymer with, a methoxy bi-subsbituted conjugated segment. The negative charge carrier mobility of 6 x 10(-11) cm(2)/V.s is directly determined using space-charge-limited current analytical expressions. Positive charge carrier transport is also space-charge-limited, with a mobility of I x 10(-8) cm(2)/V.s. The electron trap distribution is exponential, with a characteristic energy of similar to 0.12 eV. A hole trap with energy similar to 0.4 eV was observed. This copolymer is used as emissive material in organic light-emitting diodes that present brightness of similar to 900 cd/m(2) at 12.5 V.

Bi-Mo-Nb复台氧化物的结构与对丙烯氧化的催化活性

本文用XRD,IR,Raman,SEM和ESR等方法研究了系列氧化物Bi_2Mo_(3-3x)Nb_(2x)O_(12-4x)(X=0.00,0.02,0.05,0.10,0.15,0.20,0.25)的结构和对丙烯氧化的催化活性,结果表明,在X≤0.25范围内,催化剂基本保持典型的α-Bi_2Mo_3O_(12)结构,少量Nb~(5+)的掺杂,可取代晶格中的Mo~(6+),产生氧空位,无序分布的氧空位的浓度先随X值的增加而增加,当X=0.15时达最大值,催化剂对丙烯氧化的催化活性与这种氧空位的浓度成正比,反应遵循Redox机理.

Shear Strength Measurements in LY-12 Aluminium Alloy During Shock Loading

Lateral stress of LY-12 alummium alloy under plate impact shock loading was measured. Based on the measured data, the Hugoniot relation and shear strength were obtained. The result has demonstrated that the shear strenath of the tested material increases remarkably with the increasing longitudinal stress. This means that the assumption of constant shear strength usually adopted in shock stress calculation is not suitable for the present material.

The Evolution of Fatigue bocks in Aluminum Alloy LY-12 under Shock beading

对LY12铝合金在低周疲劳条件下的裂纹情况和随后进行的动态拉伸条件下裂纹的发展给予了观察和统计分析。发现裂纹的累积数密度分布在损伤演化过程中保持指数形式,用NAG模型对实验结果进行分析,得出该材料裂纹演化发展方程的各种参数。

LY-12铝高温凝聚态动力学性质研究——高温冲塞剪切破坏强度的测量

本文介绍Ly-12铝合金从常温到400℃高温下,动态冲塞剪切破坏强度的测试及研究结果,并给出了该种材料静态压剪破坏强度的测量结果。在上述温度范围内,Ly-12铝的动态冲塞剪切破坏强度与其静态结果之比为1.3∶1～4∶1,表明随着温度的升高,动态的强度远大于同温度的静态结果。

LY-12铝高温凝聚态动力学性质研究——高温弹性模量的测定

金属材料的高温动态力学性能是材料科学领域中的重要方面。本文介绍LY-12合金铝在常温至450℃的温度区间内和动载下(应变率为 10~3/秒),材料弹性模量的研究。此项研究采用的试验装置为一维Hopkinson压杆及管式高温炉。应用一维弹性应力波传播理论,测得LY-12铝试件在不同温度T条件下的声速c(T),按照c(T)=[E(T)/ρ(T)]~(1/2),获得杨氏模量E(T)随温度的变化曲线。